Enterografia por tomografia computadorizada: uma avaliação de diferentes contrastes orais neutros

OBJETIVO: O objetivo deste estudo foi avaliar o desempenho de contrastes orais neutros, comparando a capacidade de distensão intestinal, a distinção da parede intestinal, a aceitação e os efeitos colaterais. MATERIAIS E MÉTODOS: Estudo prospectivo, randomizado e duplo-cego em 30 pacientes submetidos a tomografia computadorizada de abdome e pelve com administração de contraste oral neutro, divididos em três grupos: leite, água e polietilenoglicol. Os exames foram analisados quanto ao grau de distensão intestinal e distinção da parede intestinal por dois examinadores em consenso. Os pacientes responderam a um questionário referente ao sabor da solução ingerida e efeitos colaterais. Foram utilizados os testes Kruskal-Wallis e qui-quadrado para as análises estatísticas. RESULTADOS: Distensão intestinal adequada (calibre da alça maior que 2 cm) foi observada em 14 segmentos dos 40 estudados (35%) no grupo leite, em 10 segmentos (25%) no grupo água e em 23 segmentos (57%) no grupo polietilenoglicol (p = 0,01). O preparo com polietilenoglicol resultou na melhor distensão intestinal, porém apresentou o pior sabor e maior incidência de diarreia, referidos pelos pacientes. CONCLUSÃO: O preparo oral com polietilenoglicol promove maior grau de distensão intestinal do que quando se utiliza água ou leite, mas tem pior aceitação, relacionada ao seu sabor e frequência de diarreia.

Estudo da Determinação dos Grupos Silanóis ( º Si-OH) em Sílica: Aplicação à Materiais de Recheio Utilizados em Cromatografia Gasosa

A simple chemical method has been developed to quantify the silanol groups (º Si-OH) in silica as well as in coated chromatographic supports for use in packed - column Gas Chromatography. After adsorption of 10 mg/mL methylene blue, centrifuging action and filtration, the absorbance of the solution was inversely proportional to the silanol quantity. The difference between the absorbance of the pure solution and that of the solid - free filtrate was related to the silica weight, yielding a quantitative analysis of these groups.

Química de materiais no Brasil: um olhar através das reuniões anuais da Sociedade Brasileira de Química

Several aspects of the Chemistry of Materials in Brazil will be focused using, as a data source, the activities of the Chemistry of Materials Division of the Brazilian Chemical Society. Evaluations, suggestions and prospectives are made on attempt to overcome challenges and difficulties of this emergent and important area of the chemical research.

Relação entre as massas úmida, seca e de cinza em materiais biológicos - uma ferramenta para amostragens em campo e análise de amostras

Little is known about the amount of water and ash in brazilian foodstuffs and plants. The relationships between fresh, dry and ash weight were determined in 40 different biological samples. It could be an important tool when one studies biological material containing low concentration of the chemical elements. This study address to determine these relationships and to provide the amount of biological material that one needs to collect. It aims to supply information that could be used to improve the detection limit, precision and accuracy of the analytical methodology utilized.

Uma visão das tendências e perspectivas em eletrocromismo: a busca de novos materiais e desenhos mais simples

Some aspects of electrochromism phenomena are presented in this review paper. A deep literature revision about the subject dealing with materials and device configurations developed in the last years, is presented. Great efforts of the scientific community have been done in this field. On the other hand, new electrochomic devices based on reversible deposition of metals are specially emphasized here. These devices present many advantages such as simple operation and construction and they have also shown high cycling rates. These factors make them suitable for application in display industry. In this way, many concepts used in the developement of electrodeposition baths are very useful for the improvement of these new devices; specially, all knowledge about the use of additives for modifying films microstructure and morfology.

Um potencial de interação para o estudo de materiais e simulações por dinâmica molecular

The Vashishta-Rahman effective interaction potential, based on the Pauling's concept of "ionic radii", has been successfully employed to investigate structural and dynamical properties of different classes of material. By celebrating Pauling's birth centenary, we review the building up of the Vashishta-Rahman potential and we present molecular-dynamics simulation results for structure and dynamics of superionic materials, chalcogenide glasses and metallic oxides.

Materiais para cátodos de baterias secundárias de lítio

In this work, cathodes employed in secondary lithium batteries are reviewed. These cathodes have great technologic and scientific importance, specifically, materials for cathodes as electronic conductor polymers (ECP), transition metal oxides (TMO) and nanocomposites of ECP/TMO. The use of a specific cathodic material is based in some intrinsic characteristics that improve the performance of the battery. Thus, some vantages and disvantages of these insertion compounds are discussed, as lithium insertion capacity, energy density, and the ciclability of these materials.

Aplicação de metodologias FTIR de transmissão e fotoacústica à caracterização de materiais altamente energéticos: parte II

Materials obtained during the synthesis of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) were characterized by Fourier transform infrared (FTIR) transmission spectroscopy and/or Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). By these techniques the spectrometric alterations that occurred during the process were observed. The characterized species during the synthesis of HMX were alpha-HMX, beta-HMX, hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and HMX/RDX mixtures. The FTIR-PAS was verified to be a promising technique of great usefulness of the characterization of highly energetic materials because it is fast, simple and requires no sample preparation unlike Fourier transform infrared transmission technique (KBr pellet). The FTIR-PAS analysis showed that with small sample quantity is possible to distinguish between thealpha-HMX and beta-HMX and to detect even in a qualitative way different HMX / RDX ratios.

A utilização de materiais obtidos pelo processo de sol-gel na construção de biossensores

The use of sol-gel materials to develop new biosensors has received great attention due to its characteristics and versatility of sol-gel process. An overview is presented of the state-of-the-art of electrochemical biosensors employing sol-gel materials. Low-temperature, porous sol-gel ceramics represent a new class for the immobilization of biomolecules. The rational design of sol-gel sensing materials, based on the judicious choice of the starting alkoxide, encapsulated reagents, and preparation conditions, allows tailoring of material properties in a wide range, and offers great potential for the development of electrochemical biosensors.

Química de materiais em 25 anos de SBQ

Communications on Chemistry of Materials topics were already presented in the first annual meetings of the Brazilian Chemical Society, dispersed throughout various meeting sections. The SBQ Materials Chemistry division was organized in 1993, attracting those members with an interest in the composition, structure and properties of materials, as related to their functions. This paper is an account of the development of Materials Chemistry research in Brazil, based on the SBQ annual meetings data.

Novos materiais à base de nanofibras de carbono como suporte de catalisador na decomposição da hidrazina

Today satellites propulsion is based on the use of monopropellant and/or bipropellant chemical systems. The maneuvering of satellite is based on the hydrazine decomposition micropropulsors catalyzed by metallic iridium supported on g-alumina. This reaction is a surface reaction and is strongly exothermic and implies that the operation of the micropropulsor is controlled by the mass and heat diffusions. For this reason and for the fact that the propulsor operation is frequently in pulsed regime, the catalyst should support high pressure and temperature variations within a short time period. The performance and the durability of the commercial catalyst are jeopardized by the low thermal conductivity of the alumina. The low thermal conductivity of the alumina support restricts the heat diffusion and leads to the formation of hot spots on the catalyst surface causing the metal sintering and/or fractures of the support, resulting in loss of the activity and catalyst destruction. This work presents the synthesis and characterization of new carbon composite support for the active element iridium, in substitution of the commercial catalysts alumina based support. These supports are constituted of carbon nanofibers (30 to 40 nm diameter) supported on a macroscopic carbon felt. These materials present high thermal conductivity and mechanical resistance, as well as the easiness to be shaped with different macroscopic shapes. The mechanical stability and the performance of the iridium supported on the carbon composite support, evaluated in a laboratory scale test in hydrazine decomposition reaction, are superior compared to the commercial catalyst.

Caracterização e estabilidade físico-química de sistemas poliméricos nanoparticulados para administração de fármacos

Polymeric nanoparticle systems such as nanocapsules and nanospheres present potential applications for the administration of therapeutic molecules. The physico-chemical characteristics of nanoparticle suspensions are important pre-requisites of the success of any dosage form development. The purpose of this review is to present the state of the art regarding the physico-chemical characterization of these drug carriers, in terms of the particle size distribution, the morphology, the polymer molecular weight, the surface charge, the drug content and the in vitro drug release profiles. Part of the review is devoted to the description of the techniques to improve the stability of colloidal systems.

Alcóxidos como precursores na síntese de novos materiais através do processo sol-gel

An overview about the role of alkoxides in the most recent uses of the sol-gel process in the synthesis of new materials is presented. Special attention is focused on the uses of silicon, aluminum, zirconium and titanium alkoxides. This review shows that the alkoxides enable the synthesis of new matrices with controlled surface area, acidity and porosity, as well as some unusual properties. The property associated with the solubility of metal alkoxides opens enormous possibilities of combining them for the synthesis films of powders with a very large range of metal compositions.

Nanocompósitos de matriz polimérica: estratégias de síntese de materiais híbridos

Associating the well known advantages of hybrid materials to the wide potential of nanomaterials, the new and featuring class of polymer nanocomposites turned into one of the most intensively researched areas. This review highlights recent developments in the field of the synthesis of polymer based nanocomposites. Important issues related to the surface modification of fillers, in order to promote the compatibility between the inorganic/organic components, are also reported. The enhancement of the physical properties and the potential applications of polymer nanocomposites are considered in typical examples, given for each synthetic method described.

Materiais híbridos orgânico-inorgânicos: preparação e algumas aplicações

The preparation and application of organic-inorganic hybrid materials are under fast development and constitute an interesting research topic on account of the versatility and wide range of applications offered by these materials. These properties can be achieved due to the mixture of the components at the molecular level. The present review covers the state of the art, the most useful preparation routes and the potential applications of these materials.