EMBALAGEM INDIVIDUAL DE MANGAS CV. TOMMY ATKINS EM FILME PLÁSTICO: EFEITO SOBRE A VIDA DE PRATELEIRA

Estudou-se o efeito da embalagem de policloreto de vinila (PVC) sobre a vida de prateleira de mangas cv. Tommy Atkins armazenadas sob refrigeração. Mangas no estádio de maturidade fisiológica, com casca verde ou levemente avermelhada, foram embaladas individualmente, com filme de 10mm de espessura, e armazenadas por 28 dias a 12ºC (80-90% UR). Frutos sem embalagem serviram de controle. Durante o período de armazenagem, foram feitas avaliações sensoriais utilizando o método de escala hedônica não estruturada para aceitação da aparência e do sabor, utilizando-se de 30 provadores não treinados por sessão. Determinou-se também a perda de massa, a acidez titulável e os teores de sólidos solúveis e vitamina C ao longo da armazenagem. As mangas embaladas apresentaram uma vida de prateleira de 21 dias contra 6 dias das não embaladas, e uma taxa de perda de massa 3,5 vezes menor que as não embaladas. Em relação à taxa de degradação de vitamina C, não houve diferença entre os tratamentos. A combinação da embalagem com a armazenagem a 12ºC aumentou a vida de prateleira do produto pela redução da atividade metabólica e do desenvolvimento de podridão.

Conservação pós-colheita de mamão formosa com filme de pvc e refrigeração

O objetivo deste trabalho foi aumentar a vida útil pós-colheita de frutos de mamão, mantendo sua qualidade com utilização de filme de PVC, de 12 mm de espessura, e refrigeração. Foram utilizados mamões do grupo Formosa Tainung 01. A temperatura refrigerada foi de 10ºC e umidade relativa do ar de 90%. A temperatura ambiente foi 25ºC (+/- 1) e umidade relativa em torno de 60%. O delineamento utilizado foi o de blocos casualizados. As menores perdas de massa fresca ocorreram com uso de PVC a 10ºC. O uso da refrigeração a 10ºC condicionou maior firmeza, além de menores teores de sólidos solúveis totais e elevação da relação SST ATT-1 até o 6º dia de armazenamento, seguida de estabilização. O armazenamento de mamão Formosa sob refrigeração, associado com filme de PVC, foi mais eficiente na manutenção da qualidade dos frutos, proporcionando maior tempo de vida útil.

Atividade antioxidante, composição química e conservação do maracujá-amarelo embalado com filme PVC

O objetivo deste trabalho foi avaliar as características químicas e a conservação do maracujá-amarelo embalado com filme de PVC durante o armazenamento refrigerado a 5 ºC. Atividade antioxidante (DPPH e TEAC), compostos fenólicos totais, β-caroteno e ácido ascórbico do suco do fruto foram os parâmetros químicos avaliados. As estimativas de perda de massa, enrugamento, cor e sintomas de patógenos foram utilizadas no estudo de conservação. As avaliações foram realizadas em intervalos de 10 dias, durante 40 dias. De acordo com os resultados, o teor de fenólicos totais aumentou durante o armazenamento, com variações entre 20,10 e 21,29 mg EAG 100 mL-1. O conteúdo de ácido ascórbico aumentou até o 20º dia de armazenamento (33,58 mg 100 mL-1), mas seguiu com decréscimos até o 40º dia (21,67 mg 100 mL-1). Independentemente do uso de PVC, o conteúdo de β-caroteno não variou durante o armazenamento. As atividades antioxidantes DPPH e TEAC do suco diminuíram durante o armazenamento. Não foram encontradas correlações positivas entre as atividades DPPH e TEAC e o teor de fenólicos totais, sugerindo que este último não contribui para a atividade antioxidante do suco do maracujá. O uso da embalagem de PVC não influenciou positivamente a atividade antioxidante e os teores de fenólicos totais e ácido ascórbico do suco do maracujá-amarelo durante seu armazenamento. A embalagem de PVC não inibiu sintomas de desenvolvimento de patógenos por até 30 dias de armazenamento, a 5 ºC, mas reduziu a perda de massa fresca e o enrugamento do fruto, proporcionando condições ótimas de comercialização por até 20 dias.

Influência da adição de defloculante, ligante e partículas de alumina no comportamento reológico de suspensões a base de frita e caulim

Enamel suspensions were characterized according to their rheological behavior. The suspensions presented a pseudoplastic behavior, yield stress and thixotropy, with or without the presence of deffloculant. Added carboxymethylcellulose increases the apparent viscosity of enamel suspensions and interacts complexly with the deffloculant, here sodium silicate. Addition of crystalline particles of two types of alumina, used to improve the wear resistance of ceramic glazes, also change strongly the rheological behavior of the suspensions. Added high specific area, irregular alumina particles produce a higher increase of the apparent viscosity of enamel suspensions compared to rounded ones.

Partículas nanométricas de ferritas de ítrio

Nanoparticles of yttrium iron garnet (YIG) were obtained by coprecipitation. The particles were prepared by hydrolysis in acid medium with addition of ammonia or urea, for homogeneous nucleation, at 90ºC. Different compositions and spherical morphologies were achieved by changing reactants concentrations and precipitation agent. X-ray diffractometry, transmission electron microscopy, differential thermal analysis and electrophoretic mobility were carried out on these particles to investigate the obtained phase, phase transition temperature, morphology, particle size and zeta potential, respectively.

Estudo das partículas totais em suspensão e metais associados em áreas urbanas

This work aims at the study of the air quality determination regarding the total suspended particles (TSP) and the associated metals in the counties of Charqueadas and Sapucaia do Sul at the state of Rio Grande do Sul. The TSP samples were collected using high volume samplers and the analysis of the metallic elements was accomplished through ICP-AES. The results revealed that the TSP concentrations, found in the two studied regions, have exceded the current air quality patterns established by the Brazilian Legislation. They also revealed high levels of several of the elements being attributed to the presence of anthropogenic sources. The correlation between meteorological data (speed and wind direction) and TSP concentrations were significant and revealed strong influence in particle dispersion.

Filme fino de ZrO2 enxertado sobre a superfície de sílica gel: preparação e propriedade de adsorção de Cr(VI)

The present experiment describes an easy procedure for obtaining SiO2/ZrO2 by reacting ZrOCl2 with SiO2 with the following characteristics: S BET = 500 m² g-1 and an average pore diameter of 6 nm. The material obtained presented 1.3 wt% ZrO2 content corresponding to 140 mumol g-1. The average density of ZrO2 onto SiO2/ZrO2 matrix is 2.8x10-11 mol cm-2. The adsorption isotherm for Cr(VI) showed a maximum of adsorption value (200 mumol g-1) at pH 2. The adsorption can be described by the reaction: =Zr(OH)2 + 2HCrO4- + 2H+ [(=Zr(OH2+)2) (HCrO4-)2]. Above the zero point of charge, i.e. pH > 5.5 due to the surface charge inversion, desorption of Cr(VI) occurs according to the reaction: [(=Zr(OH2+)2) (HCrO4-)2] + 6OH- (=ZrO2)2- + 6H2O + 2CrO4(2-).

Análises seqüenciais de agrupamentos aplicadas ao estudo de partículas atmosféricas

The present paper has as objective to apply a sequential Cluster Analysis to the atmospheric particles: Hierarchical Cluster Analysis followed by Nonhierarchical Cluster Analysis. The hierarchical cluster analysis results were used as start point for the nonhierarchical cluster analysis as an agglomerative technique. These particles were taken from two areas of the metropolitan region of Porto Alegre, Charqueadas and Sapucaia do Sul., from may /97 to may/98, using a High Volume Sampler (Hi-Vol). Around 10,000 particles were analysed by Scanning Electron Microscope with Energy-Dispersive X-Ray microanalysis (SEM-EDS). The Hierarchical Cluster Analysis allowed the identification of five groups of particles, whose amounts were differentiated according to the summer and the winter campaigns. The abundance of each type of particles inside each group according to the different sections was verified by the Nonhierarchical Cluster Analysis, resulting in information about the emissions sources. The groups of particles of Si/Al and Si and of Fe/Zn and Fe for Charqueadas were more significant in section 2 and 3 (NW and W wind directions) and in section 1 (SE wind direction), evidencing the influence of the coal power plant and steel industry, respectively located in these quadrants. In Sapucaia do Sul the data were more heterogeneous, causing a certain difficulty to identify the source as anthropogenic. Nevertheless the group of particles containing Fe was found in sectors of NW/W wind directions which shows the influence of the steel plant.

Estudo do efeito do tratamento superficial por moagem sobre as propriedades das partículas de uma liga de hidreto metálico

This work reports results of studies on the electrochemical and structural properties of a Ti/Zr-based metal hydride alloy covered by Ni and LaNi4,7Sn0,3 powder additives by ball milling. The effect of this treatment is investigated for the activation time, hydrogen storage capacity and equilibrium pressure, cycling stability and the hydration/dehydration kinetics. Charge and discharge cycles show a significant decrease of the activation time due to an increase of the active area caused by the milling treatment, independent of the additive. However, other results have evidenced little effect of the milling surface treatment on the charge storage capacity, hydrogen equilibrium pressure, and hydration/dehydration kinetics, for both the Ni and LaNi4,7Sn0,3 covered materials.

Imobilização de lipases em filme de caseinato de sódio/glicerol: aplicação na síntese de ésteres

Lipases from different sources were immobilized in sodium caseinate/glycerol film and used in the esterification reactions of aliphatic acids with alcohols in the presence of organic solvents. Lipases from Pseudomonas sp and Rhizopus oryzae were selected and the influence of several parameters was analyzed, including: lipase loading, organic solvent polarity, reaction temperature, chain length of alcohol and acid and enzyme/support reuse. For comparison, free enzymes were used under similar experimental conditions.

Hidrogenação eletrocatalítica de substratos orgânicos utilizando eletrodos modificados poliméricos contendo partículas de Ni/Pd e Ni/Pt

Novel modified electrodes bearing dispersed Pd and Pt particles have been prepared from poly (allyl ether of the p-benzenesulfonic acid) films with incorporated nickel particles making use of galvanic displacement reactions. The SEM analysis of the new modified electrodes revealed efficient deposition of Pd but weak up-take of Pt. Electrocatalytic hydrogenation of several classes of organic substrates were carried out using the MEs Ni, Ni/Pd and Ni/Pt. The Ni/Pd ME showed to be the best of them for the hydrogenation of double, triple and carbonyl bonds. The complete hydrogenation of the aromatic rings for the well-adsorbed substrates acetophenone and benzophenone is noteworthy.

Adsorção do corante azul de metileno em partículas de argilominerais: análise dos tamanhos das partículas

Interactions of cationic dye methylene blue (MB) with clay particles in aqueous suspension have been extensively studied. As already known, the number of natural negative charges on the clay modifies significantly the particle sizes dispersed in water and therefore the nature of the interaction with the dye. This work evaluated with UV-Vis spectroscopy method how the clay particle sizes weighted on the adsorption and rearrangement of the dye molecules in aqueous system. The results obtained from light-scattering measurements confirmed that larger particles are found in suspensions containing the high-charged clays as the visible absorption band related to the MB aggregates (570 nm) on these suspensions prevailed.

Determinação de peróxido de hidrogênio em antisséptico bucal usando um microdispositivo contendo partículas de Azul da Prússia

A simple flow-injection amperometric procedure using a three-electrode-integrated sensor for the determination of H2O2 in antiseptic mouthwash is reported. This method involves the use of a working composite electrode modified with Prussian Blue (PB) particles that was easily adapted as detector in FIA. The best amperometric response was observed for a composite containing 30% of graphite modified with PB particles (GAP) and 70% of pure graphite (GR). The proposed method presents a linear response in the range of 10 to 200 μmol L-1. The detection and quantification limits were 0.8 and 2.6 μmol L-1, respectively.

Construção e aplicação de um minissensor de filme de bismuto utilizando materiais de baixo custo para determinações voltamétricas in loco

The construction of a low cost mini sensor containing a bismuth-film electrode (BiFE), as work electrode, a silver electrode as pseudo reference electrode, and copper as counter electrode is proposed. The application of this mini sensor using a low cost electrochemical cell for in loco voltammetric determinations of inorganic and organic analytes is also described.