Determinação de metil-etil-cetona em amostras de urina com amostragem por micro extração em fase sólida (MEFS) em headspace associada à cromatografia gasosa com detector de ionização de chama (CG-DIC)

Methyl ethyl ketone (MEK) is a solvent commonly used in chemical, paint and shoe industry. The aim of this study was to develop and validate a method for urinary quantification of MEK, employing headspace solid phase micro extraction sampling (SPME) coupled to gas chromatography with flame ionization detection (GC-FID). The calibration curve (y=4.6851x-0.0011) presented good linearity with r²=0.9993. Accuracy (94-109%), intra-assay precision (4.07-5.91%) and inter-assay precision (3.03-5.62%) were acceptable. The quantification limit was 0.19 mg/L. This low cost method can be used routinely in the biological monitoring of occupational exposure to MEK, according to the requirements of the Brazilian legislation.

Estudo comparativo de métodos de preparo de amostras de tinta para a determinação de metais e metalóides por técnicas de espectrometria atômica

This work deals with paint decomposition methods for major, minor and trace elements determination. Three methods were investigated: (1) decomposition in closed quartz vessel and heating in microwave oven; (2) decomposition in open vessel using HNO3 and ashing, following the ASTM D 3335-85a method; and (3) decomposition in open vessel using HNO3 + HF and ashing. Paints of different types and colours were analyzed, in which several elements were determined using inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP OES). It was observed that method (1) is appropriate for trace, minor and major elements determination, while method (3) is appropriate for Ti.

Tintas anti-incrustantes de terceira geração: novos biocidas no ambiente aquático

Antifouling agents have been used on vessels and boats since ancient civilizations. Thus, a brief history on the three generations of antifouling paints was provided in the present review. Additionally, information about physic-chemical properties, environmental levels, toxicology and analytical methods was discussed for the 16 "new" booster biocides used as third-generation antifouling paints. The main problems, limitations and future trends related to this subject were also presented. Finally, actions were suggested in order to appraise the current status of the environmental impact caused by these compounds in South America.

Labile copper and zinc fractions under different salinity conditions in a shipyard area in the patos lagoon estuary, south of Brazil

Copper and zinc are common elements in paint residues and can be toxic to estuarine organisms. This study aims to determine the labile dissolved and labile particulate fractions (LPFs) of copper and zinc in the estuarine waters of a shipyard in southern Brazil under different salinity levels and in different seasons. The labile dissolved fraction was determined using the diffusive gradient in thin-film (DGT) technique. The variations in DGT-Cu (0.22-1.05 µg L-1), DGT-Zn (0.54-18.39 µg L-1), LPF-Cu (1.22-3.77 µg g-1), and LPF-Zn (4.29-19.12 µg g-1) concentration were related to changes in their physico-chemical parameters and as a result of boat maintenance activities.

GLICEROFOSFOLIPÍDIOS SINTÉTICOS PARA USO COMO ADITIVO BIOCIDA EM TINTAS ANTI‑INCRUSTANTE

AbstractThis paper presents a technological innovation that uses a subclass of glycerophospholipids as a booster biocide in antifouling paint. These glycerophospholipid PAF-analogs are economically and environmentally viable compounds because they are synthesized from a metal-free raw material source-soybean lecithin. The synthesis, which involves transesterification followed by an alkylation reaction, produced a mixture of glycerophospholipids that were characterized by mass spectrometry. Evaluation of the antifouling performance with field tests showed that the replacement of ordinary halogenated booster biocide with the synthesized product gave a better efficiency and an exceptional antifouling activity with a significant reduction in the coverage of the fouling macro-organisms.

Validação de escala diagramática para estimativa de desfolha provocada pela ferrugemasiática em soja

Este estudo teve como objetivo avaliar a precisão e acurácia de avaliadores com o uso de escala diagramática, em estimativas de desfolha provocada por doenças em soja. A escala apresenta seis níveis de severidade de desfolha (5, 15, 45, 65, 85 e 100%). As imagens utilizadas para avaliação foram obtidas em parcelas atacadas por ferrugem asiática (Phakopsora pachyrhizi), apresentando diferentes níveis de desfolha. A validação foi feita por dez avaliadores, utilizando-se como parâmetro de comparação dados reais da área com cobertura foliar, obtidos através de processamento de imagens, nos softwares Paint Shop Pro 4, e Adobe Photoshop 7.0. Quando não foi utilizada a escala, os avaliadores apresentaram tendência de subestimar a severidade de desfolha nos níveis mais baixos e de superestimar em níveis altos. A acurácia e precisão dos avaliadores aumentaram com o auxílio da escala diagramática.

Thermal comfort indices in individual shelters for dairy calves with different types of roofs

Among the building materials used in rural facilities, roofs are noteworthy for being largely responsible for thermal comfort, influencing the thermal balance within the shelter. This study aimed to evaluate the influence of roof on the Enthalpy (H), Thermal Load of Radiation (TLR), and Black Globe Temperature and Humidity Index (BGHI) in individual shelters for dairy calves. The design was completely randomized with three treatments: Z - zinc tile, AC - asbestos-cement tile and ACW - asbestos-cement tile painted white on the upper side. The averages were compared by the Scott Knott test at 1% probability. The results showed no statistical difference between treatments (P<0.01) and the external environment for H. For TLR, there was statistical difference among all treatments, where ACW showed the lowest TLR, 489.28 W m-2, followed by AC with 506.72 W m-2 and Z with the highest TLR, 523.55 W m-2. For BGHI, the lowest values were observed for ACW (76.8) and AC (77.4), differing significantly from Z, which obtained the highest value (81.6). The tiles with white paint on the upper side promoted the lowest TLR and the lowest BGHI, favoring the thermal environment in the shelter.

Internal ambience of beehives Apis mellifera with different colors and roofing materials in the sub middle of the São Francisco Valley

ABSTRACTThe current study aimed to evaluate the influence of three colors and two types of roofing materials under the internal temperature of bee colonies Apis mellifera. The experiment was conducted at the Agricultural Sciences Campus at the Federal University of Sao Francisco Valley located in Petrolina-PE, in November and December 2013, using 24 colonies housed in Langstroth hives. The experiment was a completely randomized factorial design (3x2) with three colors of box (blue, white, and traditional) and two types of cover (with and without the use of plaster) with six treatments and four replications. The internal temperature dates of the colonies were hourly recorded, during 24 hours, and surface temperatures were hourly recorded between 08h00 and 17h00. The highest values for surface and internal temperature were registered in the blue painted boxes without the use of plasterboard, and the blue painted boxes covered with plasterboard respectively. However, the lowest values ​​were found in the white painted hives and hives that have not received the plasterboard. It is recommended to paint boxes with bright colors, and the use of plasterboard had no effect in reducing the internal temperature.

Paratuberculose em caprinos e ovinos no Brasil

Este trabalho relata, pela primeira vez no Brasil, no Estado da Paraíba, paratuberculose em dois rebanhos com criação conjunta de caprinos e ovinos. Na Fazenda 1, de um rebanho de 33 caprinos e 13 ovinos, uma cabra adulta apresentou emagrecimento progressivo por aproximadamente um ano e fezes pastosas um mês antes da morte. Todos os animais do rebanho foram tuberculinizados com a prova comparativa. Um ovino (2,2%) teve resultado positivo à tuberculina aviar e em dois o teste foi inconclusivo. Na Fazenda 2, com 200 ovinos e 80 caprinos, foi afetada uma ovelha adulta que apresentou emagrecimento progressivo por aproximadamente um ano e fezes pastosas por aproximadamente 20 dias. Todos os ovinos com mais de 4 meses de idade e 23 caprinos foram tuberculinizados com tuberculina aviar; em 47 (25,4%) o resultado foi positivo, em 115 (61,5%) inconclusivo e em 25 (13,4%) negativo. Entre as cabras não houve nenhuma positiva à tuberculina aviar, mas em 11 (47,8%) o teste foi inconclusivo e em 12 (52,2%) foi negativo. Na necropsia dos dois animais com sinais clínicos os linfonodos mesentéricos estavam aumentados de tamanho e edemaciados. O ovino afetado da Fazenda 2, apresentou espessamento e enrugamento da mucosa do intestino, principalmente no íleo e válvula íleo-cecal. Microscopicamente o caprino e o ovino com sinais clínicos apresentaram lesões semelhantes, caracterizadas por granulomas com predominância de macrófagos espumosos, na lâmina própria e submucosa do intestino e linfonodos mesentéricos. O ovino positivo à tuberculina e um caprino negativo na Fazenda 1 foram eutanasiados e apresentaram discreto espessamento da mucosa do íleo. Na histologia foi observado infiltrado preferentemente linfocítico. Em todos os casos dentro de macrófagos e linfócitos havia bacilos ácool-ácidos resistentes, positivos na imunohistoquímica para Mycobacterium spp. Sugere-se a necessidade de estudar a prevalência de paratuberculose em rebanhos de caprinos e ovinos no Brasil, determinar medidas de controle e avaliar a possibilidade de transmissão para humanos.

Application of cutting fluids in machining processes

In the last decade a lot has been discussed about the suitability of using cutting fluid in abundance to cool and lubricate machining processes. The use of cutting fluid generally causes economy of tools and it becomes easier to keep tight tolerances and to maintain workpiece surface properties without damages. In the other hand, it brings also some problems, like fluid residuals and human diseases. Because of them some alternatives has been sought to minimise or even avoid the use of cutting fluid in machining operations. Some of these alternatives are dry cutting and cutting with minimum quantity of fluid (MQF). The main goal of this work is to discuss these tendencies. Therefore, topics like kinds and methods of applications of modern cutting fluids and what are new in this area will unavoidably be considered. MQF and dry cutting techniques, their applications and where it is not possible to apply them will also be focused. To exemplify the topics, this work will describe some of the researches been developed in two important Brazilian Universities: State University of Campinas (UNICAMP) and Federal University of Uberlândia (UFU).

Effect of exercise on the caloric intake of breast cancer patients undergoing treatment

The purpose of this study was to examine the effects of an exercise intervention on the total caloric intake (TCI) of breast cancer patients undergoing treatment. A secondary purpose was to determine whether or not a relationship existed between changes in TCI, body fat composition (%BF), and fatigue during the study, which lasted 6 months. Twenty females recently diagnosed with breast cancer, scheduled to undergo chemotherapy or radiation, were assigned randomly to an experimental (N = 10) or control group (N = 10). Outcome measures included TCI (3-day food diary), %BF (skinfolds), and fatigue (revised Piper Fatigue Scale). Each exercise session was conducted as follows: initial cardiovascular activity (6-12 min), followed by stretching (5-10 min), resistance training (15-30 min), and a cool-down (approximately 8 min). Significant changes in TCI were observed among groups (F1,18 = 8.582; P = 0.009), at treatments 2 and 3, and at the end of the study [experimental (1973 ± 419), control (1488 ± 418); experimental (1946 ± 437), control (1436 ± 429); experimental (2315 ± 455), control (1474 ± 294), respectively]. A significant negative correlation was found (Spearman rho(18) = -0.759; P < 0.001) between TCI and %BF and between TCI and fatigue levels (Spearman rho(18) = -0.541; P = 0.014) at the end of the study. In conclusion, the results of this study suggest that an exercise intervention administered to breast cancer patients undergoing medical treatment may assist in the mitigation of some treatment side effects, including decreased TCI, increased fatigue, and negative changes in body composition.

The influence of the broccoli (Brassica oleracea var. itálica)fill weigth on postharvest quality

Broccoli is a vegetable of important economic value as well as a source of vitamin C and anticarcinogenic property substances. Although it can be minimally processed, this vegetable presents fast senescence, characterized by yellowing, loss of turgescence, development of off-odors, increase in enzymatic activity and reduction of nutritional value. Among the frequently used techniques that can extend the shelf-life of minimally processed broccoli, we have the use of cool storage and modified atmosphere packaging (MAP). Several factors interfere in the efficiency of MAP, influencing the speed and intensity of the changes on atmosphere composition. This work aimed to study the influence of the amount packaged broccoli on its postharvest quality, when stored at 1ºC. Results demonstrated strong influence of the use of MAP compared to control treatment. It was observed that for all packaged treatments there was better vitamin C retention, lower loss of weight, lower peroxidase activity and better turgidity score of broccoli. This study demonstrated that the treatments with higher amounts of product showed the worst performance on vitamin C and aroma evaluation. The peroxidase activity was also influenced, and the best results were found in the treatment with higher amounts, which presented lowest values. However there is a tendency of increase in the activity along the time, especially at the end of the experiment. It was not detected the influence of the fill weight about color evaluation.