376 resultados para fracionamento físico
Resumo:
RESUMO Conhecer a variabilidade genética de uma espécie, manifestada em caracteres morfológicos e agronômicos, é fundamental para orientar sua conservação e manejo, e subsidiar programas de melhoramento. O objetivo deste estudo foi avaliar a diversidade físico-química dos frutos de jabuticabeiras (Plinia cauliflora) em um sítio de ocorrência natural, no município de Passo Fundo-RS. Em uma população de aproximadamente 300 jabuticabeiras, coletaram-se frutos de 40 genótipos para a avaliação de doze caracteres. Os dados foram submetidos à análise descritiva, de correlação e multivariada. Utilizou-se do método de agrupamento UPGMA, a partir da distância euclidiana média. Os genótipos G18 e G35 destacaram-se pelas características relacionadas com o tamanho e o sabor dos frutos, e também por apresentarem alta divergência genética com os demais genótipos. A relação SST/ATT foi o caractere que mais contribuiu para a divergência genética (41,56%), seguido pela porcentagem de polpa (25,76%) e de casca (23,24%). Houve a formação de seis grupos de genótipos similares. Verificou-se, portanto, que jabuticabeiras nativas de um mesmo sítio de ocorrência apresentam frutos com características físico-químicas variáveis, revelando a existência de genótipos com caracteres de interesse no melhoramento da espécie.
Resumo:
RESUMO O presente trabalho teve como objetivo avaliar a qualidade físico-química das polpas de frutas congeladas comercializadas na cidade de Cuiabá-MT, comparando com os padrões estabelecidos pela legislação vigente. O experimento foi desenvolvido em delineamento inteiramente casualizado, sendo cinco tratamentos (marcas denominadas A, B, C, D e E) e três repetições, para as polpas de abacaxi, acerola, caju, goiaba e maracujá. Foram analisados os parâmetros pH, acidez titulável expressa em ácido cítrico, sólidos solúveis, ratio, vitamina C, açúcar redutor e quantificação da perda de vitamina C após 90 dias de armazenamento sob congelamento, em polpas de acerola e caju. Os dados obtidos foram submetidos à análise de variância, e as médias, comparadas pelo teste de Tukey, ao nível de 5% de probabilidade. A marca D apresentou não conformidade com a legislação para todas as polpas em, pelo menos, um dos parâmetros avaliados. Foi observado maior número de amostras em inadequação para o teor de vitamina C e, de forma geral, as polpas avaliadas apresentaram valores abaixo das especificações exigidas pelos Padrões de Identidade e Qualidade (PIQ) para as mesmas. Todas as amostras avaliadas tiveram redução do teor de vitamina C durante armazenamento sob congelamento, sendo que nenhuma marca de polpa de acerola e apenas uma de caju apresentou, ao final de 90 dias, teor de vitamina C de acordo com o estabelecido pelo PIQ. Conclui-se que é necessária uma intensificação na fiscalização no processamento de polpas de frutas congeladas para garantia da saúde do consumidor.
Resumo:
The approaches are part of the everyday of the Physical Chemistry. In many didactic books in the area of Chemistry, the approaches are validated starting from qualitative and not quantitative approaches. We elaborated some examples that allow evaluating the quantitative impact of the approaches, being considered the mistake tolerated for the approximate calculation. The estimate of the error in the approaches should serve as guide to establish the validity of the calculation, which use them. Thus, the shortcut that represents a calculation approached to substitute accurate calculations; it can be used without it loses of quality in the results, besides indicating, as they are valid the adopted criterions.
Resumo:
A sequential system for fractionation by ultrafiltration (SSFU) equipped with advanced membranes filters (molecular size cut-off: 5, 10, 30, 50 and 100 kDalton) of the polyethersulfone type was developed for analytical fractionation of humic substances (HS) extracted from aquatic systems or soils. The device consists of five membrane filters (Sartocon® Micro) operated by a multi-channel peristaltic pump, enabling an easy handling, working in a closed system and with simple collection of the six obtained fractions (F1>100; F2: 100-50; F3: 50-30; F4:30-10; F5: 10-5 and F6 <5 kDalton). Then, the HS sample (250 mL solution 1.0 mg/mL, pH 5.0 to 6.0) to be fractionated is pumped by pump through the series of membrane filters with a tangential flow of 85 mL/min, initial pressure 0.2 to 0.3 bar and permeation flux through the membranes of 0.8 to 1.4 mL/min. The overall time for fractionation and cleaning of the device is about 10 h and 25 mL of each fraction is obtained.
Resumo:
It was evaluated the applicability of Langmuir, Freundlich and Temkin models to copper adsorption in three classes of soils. Fractions of each soil were added to test tubes containing growing concentrations of the metal in solution. The tubes were shaken and the copper concentrations were determined in the extracts by atomic absorption spectrometry (AAS). The models offered a good fit for the experimental data indicating that presence of silicated clay had high influence on copper sorption. The Langmuir isotherm showed high influence of the organic matter in the absorption phenomenon. It was evidenced the importance of further studies related to Temkin model.
Resumo:
The aquatic humic substances (AHS) investigated in this study were conventionally isolated from Rio Negro waters - Amazonas State/Brazil by means of the collector XAD 8. A special five-stage tangential-flow ultrafiltration device was used for analytical fractionation of AHS. The fractionation patterns (6 fractions each) showed that metal traces remaining in AHS after their XAD 8 isolation have different size distributions. For instance, the major percentage of traces of Ni, Cu, Zn, Cd and Pb (determined using ICP-AES) was preferably complexed by molecules with relatively high molecular size (30-100 kDa) and the following complexation order was characterized: F2 >> F1 = F4 = F5 > F3 > F6. Moreover, the species formed between AHS and metals prepared by spiking, showed distribution patterns changing as a function of the complexation time (ageing process), indicating a slow transformation process and an inner rearrangements in the binding sites within the AHS molecules.
Resumo:
Ionic liquids, in specially those based on the 1,3-dialkylimidazolium cation, have been receiving special attention in differents areas due to their interesting physical-chemical properties. In this work, some aspects of their structure (in both solid and liquid state) and its relationships with their properties are reviewed.
Resumo:
We consider the relevance of the study of the glassy state properties and the glass transition as important topics of the physical chemistry for undergraduate courses of Chemistry. Two of the most important theoretical approaches for the description of the glassy state, the thermodynamic and the kinetic models, are summarized with emphasis on the physical chemistry aspects. Examples illustrating the glass transition of some materials are also presented.
Resumo:
The determination of the physical-chemical mercury speciation in tropical coastal waters using the derivatization technique with CVAFS detection was optimized. This methodology is able to separate the elementary, reactive, organic and total mercury phases with low operational costs. The importance of bromide chloride solution, the diluted aqua regia, used as the oxidative solution, and different compositions of the reductive solution of stannous chloride were tested and the better results for coastal waters are presented. The recuperation of the sum of the different phases ranges from 80 to 94% of the total Hg content in duplicates of different marine samples. The optimized methodology permits important studies on the mercury cycle in the coastal environment.
Resumo:
The authors present a concise but critical review on the development of physical chemistry in Brazil, as seen by two experimental scientists with more then 25 years of experience in the Brazilian academics.
Resumo:
Polymeric nanoparticle systems such as nanocapsules and nanospheres present potential applications for the administration of therapeutic molecules. The physico-chemical characteristics of nanoparticle suspensions are important pre-requisites of the success of any dosage form development. The purpose of this review is to present the state of the art regarding the physico-chemical characterization of these drug carriers, in terms of the particle size distribution, the morphology, the polymer molecular weight, the surface charge, the drug content and the in vitro drug release profiles. Part of the review is devoted to the description of the techniques to improve the stability of colloidal systems.
Resumo:
The different conformations of porphyrin rings are strongly related with the electronic configurations of the metallic center in the ferriheme coordination compounds and heme proteins. The usual electronic configuration, (d xy)²(d xz,d yz )³ presents a planar conformation of the porphyrin ring and the less common electronic configuration (d xz,d yz)4(d xy )¹ occurs in the case of a strongly ruffled ring. These states are responsible for distinct chemical and spectroscopic properties of the porphyrin systems. The importance of the ring conformations, their characteristics, implications and applications are discussed.
Resumo:
Physical training can adapt or cause injury to skeletal muscles implicating metabolic alterations, which can be detected by biochemical analysis. Apparently the increase in the production of reactive oxygen species (ROS) is involved in both processes. Enzymatic and low molecular weight antioxidants (LMWA) minimize ROS's deleterious action through redox reactions. Cyclic voltammetry (CV) has been suggested as a tool to quantify the antioxidant capacity conferred by LMWA. The use of CV to evaluate the modulation of the antioxidant capacity conferred by LMWA in response to physical exercise is discussed here.
Resumo:
Biodiesel was produced by the transesterification of neutral soybean oil and anhydrous ethanol using NaOH as catalyst. Combinations of biodiesel and diesel in the proportions of 0, 5, 10, 20, 40, 60, 80 and 100% were tested, respectively, as fuel in an energy generator. The average consumption and mixture performance were analysed. The tests showed a reduction in Diesel oil consumption when mixed with up to 20% of biodiesel. The quality characteristics of these fuels were analyzed.