276 resultados para Tempo de imersão
Resumo:
Gadolinium oxyortho-silicate, Gd2SiO5, presents a monoclinic structure with two crystallographic sites in which Gd3+ ions are equally distributed with coordination numbers CN, 7 and 9, respectively. By doping this host with Er3+ it is possible to distinguish and attribute the two sites by means of lifetime determination of the 4S3/2 state, (in this case, Er3+ substitutes Gd3+ ions). Samples doped with 0.1 and 5.0% molar Er3+ were prepared by solid state reaction and characterized by X-ray Diffractometry, Vibrational and Electronic Absorption Spectroscopies, and Time Resolved Photoluminescence. Based on the experimental results, it is possible to verify that, for the 5,0% doped sample, the lifetime value of the 4S3/2 state of the erbium ion inserted in site 1, (CN = 9), is 2.7 ± 0.1 mus, and for the one inserted in site 2, (CN = 7), it is 1.5 ± 0.1 mus.
Resumo:
A simple and inexpensive time-of-flight mass spectrometer, dedicated to the study of gas-phase ionization processes induced by high energy electrons (0.5 - 3.0 keV), is described. The spectrometer design is based on the Wiley-McLaren principle, with a total length of about 18 cm. As a demonstration of the performance of the apparatus, mass spectra for Ar, CH4, CO2, and SF6, obtained at 1 keV electron energy, are presented.
Resumo:
Some commercial samples of vermicompost from bovine manure (humus) were characterized by thermogravimetry with respect to humidity, organic matter and ash contents, the percentages of which range from 6.55 to 5.35%, 53.01 to 69.96% and 46.44 to 66,14%, respectively. The capacity of adsorption of Cu2+, Zn2+ and Co2+ ions by these samples has been evaluated as a function of pH and time. The contents of several metal ions in the original vermicompost samples have been determined by flame atomic absorption spectrometry after digestion in a microwave oven. The high nitrogen content suggests that the earthworms used in the maturation procedure lead to an efficient degradation of organic matter. The metal retention was affected by both pH and adsorption time. The results also show that adsorption follows the order Cu2+ > Zn2+ > Co2+.
Resumo:
With the aim of studying the interaction of fast electrons with solid surfaces we have developed an experimental set-up based on electron stimulated desorption (ESD) coupled to time-of-flight (TOF) mass spectrometry. Poly(methyl methacrylate) and poly(vynil chloride) samples have been irradiated by a pulsed electron beam of 1.2 keV and 0.18 µs FWHM. The results show that H+ is the main ionic species to desorb after electron bombardment. In addition, other ionic fragments were also observed and assigned. These results show the potentiality of this technique in the study of ESD of polymers.
Resumo:
The oxidation of alcohols to obtain ketones, aldehydes or carboxylic acids is a fundamental transformation in organic synthesis and many reagents are known for these conversions. However, there is still a demand for mild and selective reagents for the oxidation of alcohols in the presence of other functional groups. As an alternative, the nitroxyl radical TEMPO (2,2,6,6-tetramethylpiperidine-N-oxyl) has been demonstrated to be a useful reagent for the transformation of alcohols. The oxidation of alcohols using TEMPO is often efficient, fast, selective, made in mild conditions and can tolerate sensitive functional groups. In this article we report different methodologies using TEMPO in the oxidation of alcohols.
Resumo:
The purpose of this work was to determine the safe shelf life of single-base propellants. The kinetic parameters relative to the consumption of the stabilizer diphenylamine (DPA) added to the propellant were determined as a function of the storage and ageing time. High Performance Liquid Chromatography (HPLC) with spectrophotometric detection was used to determine the DPA percentage before and after the artificial ageing at 60, 70 and 80 ºC. The experimental data were very well adjusted to a pseudo-first order kinetic model and the respective kinetic constants are 8.0-10-3 day-1 (60 ºC); 1.9-10-2 day-1 (70 ºC); 1.2-10-1 day-1 (80 ºC). The activation energy was calculated as 130 kJ mol-1 and the half-time for depletion of the DPA at the hypothetical temperature of 40 ºC of storage was estimated as being 6 years.
Resumo:
Chemical interesterification is an important alternative to produce zero trans fats. In practice, however, excessive reaction times are used to ensure complete randomization. This work evaluated the influence of the reaction time on the interesterification of soybean oil/fully hydrogenated soybean oil blend, carried out in the following conditions: 100 ºC, 500 rpm stirring speed, 0.4% (w/w) sodium methoxide catalyst. The triacylglycerol composition, solid fat content and melting point analysis showed that the reaction was very fast, reaching the equilibrium within 5 min. This result suggests the interesterification can be performed in substantially lower times, with reduction in process costs.
Resumo:
TiO2 thin films were prepared by the sol-gel method using different acids (HCl and HAc), with a parallel evaluation of the gel ageing effects on the film properties. After the thermal treatments, the resulting materials were characterized through gravimetric analysis, UV-VIS spectrophotometry (from which optical parameters such as band gap was derived), XRD, morphological surface analysis (AFM) and photocatalytic activity. The majority of the obtained thin films parameters were similar independent of the acid type and the ageing time of the gel. Nevertheless, a visible effect of the surface morphology properties on the films and their photocatalytic activity was observed.
Resumo:
The aim of this paper is to describe a chemometrics experiment for undergraduate chemistry students using basic concepts of experimental design to determine setting-time of commercial gelatins.
Resumo:
O objetivo do presente trabalho foi determinar o efeito do tratamento com água quente no controle da podridão branca (Botryosphaeria dothidea) em maçãs (Malus domestica) cv. Fuji. Os tratamentos foram combinações de três tempos de imersão em água quente (1, 2, e 3 min) e três temperaturas da água (47, 49 e 52 °C), utilizando frutos inoculados com o patógeno. As maçãs foram armazenadas na temperatura de 0-1 °C em atmosfera controlada (AC) de 1,2 a 1,6 kPa de O2 e 0,2 a 0,4 kPa de CO2 e em ar refrigerado (AR). As amostras armazenadas foram avaliadas ao final um, três e cinco meses em AC ou AR mais sete dias em temperatura ambiente. Avaliou-se o diâmetro de lesão e variáveis da qualidade dos frutos. Os tratamentos de imersão em água quente reduziram o tamanho das lesões das maçãs quando o tratamento foi de 47 °C por 3 min em armazenamento em AC. A armazenagem em AC manteve melhores as características qualitativas das maçãs.
Resumo:
O objetivo do presente estudo foi avaliar a influência de lixiviados de caupi (Vigna unguiculata) cultivar Epace 10 inoculada com Glomus etunicatum e/ou Bradyrhizobium sp. sobre eclosão de Meloidogyne incognita, M. javanica e M. mayaguensis. O solo foi infestado com 200 esporos do fungo micorrízico e/ou 1 ml de suspensão contendo 10(8) UFC/ml das estirpes de Bradyrhizobium NFB 700 e NFB 652, e semeados com caupi, deixando-se plantas não inoculadas como testemunha. As plantas foram mantidas em condições de casa de vegetação, durante 57 dias após infestação, para coleta dos lixiviados. Procederam-se avaliações após 0, 24, 48 e 144 h de imersão de ovos dos nematóides em água ou lixiviados de plantas não inoculadas e inoculadas com fungo e bactéria em conjunto ou isoladamente. O delineamento adotado foi do tipo inteiramente casualizado em arranjo fatorial 3'5'4 (nematóide ' lixiviado ' período de exposição), com quatro repetições. Meloidogyne javanica apresentou maior (P< 0,01) percentual de juvenis eclodidos quando em lixiviados de plantas inoculadas simultaneamente com o fungo e a bactéria. Considerando o tempo de exposição aos lixiviados, M. javanica e M. mayaguensis apresentaram comportamento semelhante, em relação ao percentual de juvenis eclodidos, diferindo ambas de M. incognita, após 144 h. A eclosão de juvenis em função do tempo, em resposta a cada lixiviado, ajustou-se (P< 0,01) ao modelo quadrático.
Resumo:
O objetivo desse estudo foi determinar a tolerância de banana (Musa spp.) 'Prata-Anã' (AAB) e do fungo Colletotrichum musae à termoterapia no controle de podridões em pós-colheita. Experimentos in vivo e in vitro foram instalados em delineamento inteiramente casualizado, seguindo um esquema fatorial 4x5 (temperatura x tempo). Os tratamentos consistiram na imersão dos frutos (buquês) e do fungo (esporos e micélio) em água aquecida a 47, 50, 53 e 56 ºC, durante 0, 3, 6, 9 e 12 min. A exposição dos frutos a 56 ºC durante 9 min causou escurecimento da casca nas extremidades dos frutos, porém, as características físicas e químicas dos frutos não foram alteradas pelos tratamentos. Frutos inoculados e tratados a 56 ºC durante 6 min não apresentaram podridões nem escurecimento da casca, enquanto aqueles não tratados apresentaram 64% da área lesionada / fruto. A partir das combinações 53 ºC / 9 mi. e 56 ºC / 3 min a germinação de esporos foi reduzida para 4% e 0%, respectivamente. A combinação 56 ºC / 12 min reduziu, mas não paralisou o crescimento micelial. O tratamento 56 ºC / 6 min retardou mas não paralisou o crescimento micelial in vitro, porém foi efetivo no controle completo das podridões in vivo. Esse tratamento evitou a manifestação de podridões no inverno (maio), mas não no verão (novembro), mostrando-se influenciado pelas condições climáticas próximas à colheita dos cachos. A termoterapia pode ser recomendada para controle de podridão em pós-colheita de banana devendo ser ajustada para diferentes estações do ano.
Resumo:
A transmissibilidade de Colletotrichum gossypii var. cephalosporioides foi estudada em diferentes temperaturas utilizando sementes de algodoeiro (Gossypium hirsutum) inoculadas com diferentes tempos de exposição ao patógeno. O experimento consistiu de seis tratamentos, sendo três tempos de exposição (36, 72 e 108 h) das sementes, inoculadas e não inoculadas com o fungo, testados em temperaturas de 15, 20, 25 e 30 ± 2 °C. Os tratamentos provenientes de sementes não inoculadas com o fungo foram utilizados como testemunhas. Os tempos de inoculação apresentaram diferença na incidência e na porcentagem da semente coberta com propágulos do patógeno (PSCPP), sendo o maior valor observado no tempo de 108 h, com conseqüências na germinação e porcentagem de plantas sobreviventes. Os tempos de 36 e 72 h não apresentaram diferença entre si. Temperaturas mais baixas e a maior quantidade de inóculo nas sementes proporcionaram redução na germinação e porcentagem de plantas sobreviventes. A intensidade da doença não foi influenciada pelo tempo de exposição, no entanto, a temperatura foi fator determinante para a transmissibilidade do patógeno, sendo a incidência e a severidade maiores com o aumento desta. O condicionamento osmótico estimulou o desenvolvimento fúngico, sendo observadas maior incidência e severidade da doença no tempo de 108 h.