Resistência à corrosão das fases presentes em amálgamas dentários

Neste trabalho avaliou-se a resistência à corrosão em solução salina das fases presentes na microestrutura de amálgamas dentários comerciais: gama1-Ag2Hg3, o eutético Ag-Cu e gama2-Sn7-8Hg, empregando-se técnicas eletroquímicas de potencial a circuito aberto com o tempo, de polarização potenciodinâmica e de espectroscopia de impedância eletroquímica. As ligas metálicas em estudo já foram caracterizadas em um trabalho prévio, por meio de microscopia eletrônica de varredura e difratometria de raios X. A resistência à corrosão se origina da formação de filmes passivos na superfície metálica e parece estar determinada pela natureza rugosa e porosa das superfícies.

Eletroquímica de solos modais e de sua matéria orgânica em ambientes tropicais

A química do solo vem estudando o comportamento da fração mineral dos solos tropicais intemperizados, incluindo a eletroquímica, o desenvolvimento de cargas e o fenômeno de adsorção. Por causa do amplo espectro a ser coberto no entendimento do comportamento da fração mineral, somado às dificuldades metodológicas, o estudo da complexa fração orgânica dos solos foi relativamente menos desenvolvido. A atual proposta revisita os primeiros trabalhos referentes à química de solos tropicais, buscando relacioná-los com dados de eletroquímica dos estoques de carbono do solo. O objetivo deste trabalho foi revisar aspectos de eletroquímica de solos, determinar e relacionar os pontos de carga zero, por diferentes métodos, os potenciais da dupla camada elétricae a eletroquímica do húmus de solos modais brasileiros, em uma sequência típica de intemperismo, visando a gerar informações para o seu manejo e conservação. Os métodos de estimativa dos ponto de carga zero dos solos apresentam resultados variados, mas com a mesma tendência entre os solos. Há predomínio de cargas negativas em ambas as camadas dos solos estudados. As cargas negativas dos coloides estão diretamente associadas à disponibilidade de elétrons do húmus e ambas diminuem com o estádio de intemperismo do solo.

Eletroquímica de latossolos brasileiros após a remoção da matéria orgânica humificada solúvel

A eletroquímica e a concentração de matéria orgânica nos horizontes superficiais de Latossolos correlacionam-se estreitamente. No presente trabalho, avaliaram-se as propriedades eletroquímicas do horizonte superficial de sete Latossolos brasileiros após a remoção das substâncias húmicas em meio alcalino. Os solos foram separados em dois grupos, segundo sua mineralogia, caulinítica e oxídica. O extrator NaOH 0,1 mol L-1 solubilizou substâncias húmicas correspondentes a menos de 3 % da MO total, indicando forte adsorção específica do material orgânico à fração mineral. A extração de ácidos húmicos e fúlvicos foi capaz de inverter o sinal de carga da superfície; no entanto, o efeito mais acentuado da retirada das substâncias húmicas solúveis foi a perda da capacidade-tampão das cargas do solo. A capacidade da dupla camada elétrica, uma medida indireta desse poder-tampão, aumentou de 3 a 15 vezes depois da extração das substâncias húmicas alcalino-solúveis. Solos com mineralogia predominantemente oxídica apresentaram maiores valores do ponto de efeito salino nulo, da capacidade da dupla camada elétrica, além da diminuição na capacidade de troca de cátions do que aqueles de natureza caulinítica.

Intercalação Eletroquímica de Cátions Hexilamínio na Matriz Lamelar 1T-TiS2

The electrochemical synthesis of a ternary compound obtained by the intercalation of hydrated hexilaminium cations into the layered compound 1T-TiS2 is reported. Two different compounds were detected by cyclovoltammetry and studied by X-ray diffractometry. Models showing the steric arrangement of the hydrated hexilaminium cations into the Van der Waals gaps were proposed.

Modelagem dos processos químicos em plasmas de misturas gasosas usadas na corrosão de silício. Parte 1: CF4 / O2

The plasma etching of semiconductor surfaces with fluorine-containing compounds has technological interest. Presently, considerable effort is being devoted to understand the chemistry involved. In this work, a numerical modeling analysis of the gas-phase decomposition of CF4/O2 mixtures, in the presence of silicon, was performed. The relative importance of individual processes was determined as well as the effect of the parameters' uncertainties. The results were compared with experimental data. The main etching agent in the system is the fluorine atom. The concentration of the main species, SiF4, CO, CO2 and COF2 depend on the composition of the mixture.

Modelagem dos processos químicos em plasmas de misturas gasosas usadas na corrosão de silício. Parte 2: SF6 / O2

In this work, a numerical modeling analysis of the gas-phase decomposition of SF6 / O2 mixtures, in the presence of silicon, was performed. The relative importance of individual processes and the effect of the parameters' uncertainties were determined. The model was compared with experimental data for the plasma etching of silicon and with the calculated results for the CF4 / O2 system. In both systems the main etching agent is the fluorine atom and the concentration of the major species depends on the composition of the mixture. The etching rate is greater for SF6 / O2.

Catálise eletroquímica da redução do bromato em superfícies modificadas por filmes de molibdênio

In this paper some studies concerning the electroreduction of Mo(VI) in sulphuric acid solutions are described. We have shown that at suitable experimental conditions very stable molybdenum oxide films can be electrochemically deposited at glassy carbon electrodes, the reduction of bromate occurring at less negative potentials on the modified surface. Coulometric experiments have shown that bromide is not the only product of the catalytic bromate reduction by the molybdenum film and species like BrO2 may have part in this process. Based on chronoamperometric curves recorded at -0.60 V, analytical curves have been obtained for the reduction of bromate in the 0.1 - 0.8 mM range, a limit of detection of 20 µM for bromate being determined.

Geração eletroquímica do hidreto de selênio em sistema de injeção em fluxo com detecção por espectrometria de absorção atômica com chama Ar-Glp

This paper presents a system for electrochemical hydride generation using flow-injection and atomic absorption spectrometry to determine selenium in biological materials. The electrolytic cell was constructed by assembling two reservoirs, one for the sample and the other for the electrolytic solution separated by a Nafion membrane. Each compartment had a Pt electrode. The sample and electrolyte flow-rates, acidic media, and applied current were adjusted to attain the best analytical performance and ensure the membrane lifetime. The atomisation system used a T quartz tube in an air-LPG flame. The composition of the flame, the observation height, and the argon flow rate used to carry the hydrides were critically investigated. The system allowed to perform thirty determinations per hour with a detection limit of 10 mug L-1 of Se. Relative standard deviations were in general lower than 1.5% for a solution containing 20.0 and 34.0 mug L-1 of Se in a typical sample digest. Accuracy was assessed analysing the certified materials: rice flour (NIST-1568) from National Institute of Standard and Technology and dried fish (MA-A-2), whole animal blood (A-2/1974) from the International Atomic Energy Agency.

Técnicas in situ de baixo custo em eletroquímica: a microbalança a cristal de quartzo

Among in situ techniques, the electrochemical quartz crystal microbalance (EQCM) is a powerful tool for the study of electrochemical reactions that produce mass changes in the electrode/solution interface. This review present some systems in which the EQCM combined with classical electrochemical techniques, gives relevant information for understanding the charge transport process at a molecular level. The aim of this review is to do a brief description of experimental arrangements, with emphasis on some special cares that must be considered by the users. Secondly, some chosen electrochemical systems where the technique was successfully applied are discussed. Finally, a brief analysis of electroacoustic impedance experiments was done in order to show when the Sauerbrey equation can be used.

Uma célula eletroquímica de fluxo para modificação permanente de tubo de grafite empregado em absorção atômica

A flow cell assembled on the original geometry of a graphite tube to achieve permanent chemical modifier is proposed. The graphite tube operates as the working electrode. A stainless steel tube, positioned downstream from the working electrode, was used as the auxiliary electrode. The potential value applied on the graphite electrode was measured against a micro reference electrode (Ag/AgCl) inserted into the auxiliary electrode. Palladium solutions in acetate buffer (100 mmol L-1, pH = 4.8), flowing at 0.5 mL min-1 for 60 min was used to perform the electrochemical modification. A mercury solution (1 ng) was used to evaluate the performance of the permanent palladium modifier.

Estudo da adsorção de hidrogênio e sulfeto na superfície de paládio: aspectos experimentais (eletroquímica) e teóricos (ab initio e Teoria do Funcional da Densidade)

The adsorption of H and S2- species on Pd (100) has been studied with ab initio, density-functional calculations and electrochemical methods. A cluster of five Pd atoms with a frozen geometry described the surface. The computational calculations were performed through the GAUSSIAN94 program, and the basis functions adapted to a pseudo-potential obtained by using the Generator Coordinate Method adapted to the this program. Using the cyclic voltammetry technique through a Model 283 Potentiostat/Galvanostat E.G.&G-PAR obtained the electrochemical results. The calculated chemisorption geometry has a Pd-H distance of 1.55Å, and the potential energy surface was calculated using the Becke3P86//(GCM/DFT/SBK) methodology. The adsorption of S2- ions on Pd surface obtained both through comparison between the experimental and theoretical results, at MP2 level, suggest a S2- absorption into the metallic cluster. The produced Pd-(S2-) system was show to be very stable under the employed experimental conditions. The paper has shows the powerful aid of computational methods to interpret adsorption experimental data.

A história, evolução e crescimento da Eletroquímica: Eletroanalítica nestes últimos 25 anos

This text describes the development of Electrochemistry and Electroanalytical Chemistry in Brazil from the pioneers at the IQ/USP in the 70's to the present day status. It explains how the members of the scientific community organized themselves before the establishment in 1993 of a specific division within the Brazilian Chemical Society (SBQ) through bi-ennial meetings (Brazilian Symposium of Electrochemistry and Electroanalytical Chemistry - SIBEE). Those SIBEE meetings, in a present number of 12, are described individually giving some emphasis on their organizers, the invited speakers and the statistics and overall structure of the event. The activities of the Electrochemistry and Electroanalytical Chemistry Division of the SBQ from 1993 are also briefly discussed as well as some considerations are made on the present and future of these fields.

Detecção eletroquímica em eletroforese capilar

This review focuses the development of electrochemical detection systems coupled to capillary electrophoresis. Conductometric, amperometric, voltametric, and potentiometric modes of detection are reviewed. The positioning of the electrodes, interferences of high electric field, and the materials employed in the fabrication and modification of the electrodes are discussed. The advantages of the use of electrochemical detection with capillary electrophoresis, regarding to the sensitivity and selectivity, is exemplified with a large number of applications. Also, the use of electrochemical detection systems in microchip technology is addressed.

Confecção de um perfurador de lamínulas de vidro por corrosão ácida

A simple device for glass plate drilling, which is an important step in microfabrication procedures, is described. A reservoir of concentrated hydrofluoric acid with a hole in its bottom is affixed against the glass plate. Leakage is prevented by using a neoprene O-ring. A plastic pipet tip inserted in the reservoir, close to the corrosion region, provides forced convection by pressure variations inside it. A device to make 5 simultaneous holes in a plate is also presented. For a 140 µm thickness alkaline glass lamina and 1/8" O-ring, 5 holes are drilled in 20 min.