Out of Challenge, Opportunity: Central America's Electric Sector & Key Issues and Recommendations for Enhanced Regional Electric Integration

Taken together, the six nations of Central America count a population of roughly 40 million people and an energy market equal in size to that of Colombia, sufficient to benefit from economies of scale. The region has traditionally been a net importer of hydrocarbons, and hydroelectricity has dominated electric generation. But more recently, thermoelectric generation (diesel and fuel oil) has greatly increased as a percentage of the regional generation market. Progress has been made across the region’s electric sector, beginning with reforms in the 1990s and the 1996 signing of a regional treaty aimed at the development of a regional energy integration project – the Central American Electrical Interconnection System, or SIEPAC. A fundamental SIEPAC goal is to set up a regional electric market and a regulatory system. Indeed, after many years of development, SIEPAC is poised to open a new chapter in Central America’s electric infrastructure and market. But this new era must contend with critical issues such as the need to consolidate the regional electric market, political issues surrounding the venture, and security concerns. Moreover, local conflicts, in different degrees, have become priorities for policymakers, and these are possible barriers to completing the project. The goals of the SIEPAC project and of deepening the broader electric integration process are possible if national and regional decision makers understand that cooperative decision making will produce better results than separate national decision making. Enhanced regional understanding and cooperative decision making, combined with an effort to reorient the terminology and dialogue vis-à-vis energy efficiency in Central America, form the core recommendations of this paper.

Rank and k-nullity of contact manifolds

We prove that the dimension of the 1-nullity distribution N(1) on a closed Sasakian manifold M of rankl is at least equal to 2l−1 provided that M has an isolated closed characteristic. The result is then used to provide some examples of k-contact manifolds which are not Sasakian. On a closed, 2n+1-dimensional Sasakian manifold of positive bisectional curvature, we show that either the dimension of N(1) is less than or equal to n+1 or N(1) is the entire tangent bundle TM. In the latter case, the Sasakian manifold Mis isometric to a quotient of the Euclidean sphere under a finite group of isometries. We also point out some interactions between k-nullity, Weinstein conjecture, and minimal unit vector fields.

Two Decades Out of the Whirlpool: Past (and Possible Future) United States Interventions in Latin America [Student's Paper Series]

This paper examines the history of U.S. interventions in Latin America and attempts to explain their frequency by highlighting two factors – besides security and economic interests – that have made American interventions in Latin America so common. First, immense differences in size and influence between the United States and the States of Latin America have made interventions appear to be a low risk solution to crises that threaten American interests in the region. Second, when U.S government concerns and aspirations for Latin America converge with the general fears and aspirations of American foreign policy, interventions become much more likely. Such a convergence pushes Latin American issues high up the U.S. foreign policy agenda because of the region’s proximity to the United States and the perception that costs of intervening are low. The leads proponents of intervention to begin asking questions like “if we cannot stop communism/revolutions/drug-trafficking in Latin America, where can we stop it?” This article traces how these factors influenced the decision to intervene in Latin America during the era of Dollar Diplomacy and during the Cold War. It concludes with three possible scenarios that could lead to a reemergence of an American interventionist policy in Latin America. It makes the argument that even though the United Sates has not intervened in Latin America during the twenty-two years, it is far from clear that American interventions in Latin America will be consigned to the past.

Take the "Con" Out of Consulting in the Food Service Industry

Consultants can help a food service operator with almost any problem which needs solving. Howeve6 the manager must "manage" the consultant. The author offers a design for planning for hiring and evaluating the work of anyone given the job of analyzing existing systems and diagnosing problems.

Taking the Bite Out of Higher Payroll Costs

Congress, in an attempt to help underemployed individuals, has once again passed a job hiring tax incentive program called the Work Incentive Taw Credit. This article will provide a brief review of the law and offer planning tips for hospitality firms which wish to reduce their payroll costs.

Physics-based modeling of power system components for the evaluation of low-frequency radiated electromagnetic fields

The low-frequency electromagnetic compatibility (EMC) is an increasingly important aspect in the design of practical systems to ensure the functional safety and reliability of complex products. The opportunities for using numerical techniques to predict and analyze system's EMC are therefore of considerable interest in many industries. As the first phase of study, a proper model, including all the details of the component, was required. Therefore, the advances in EMC modeling were studied with classifying analytical and numerical models. The selected model was finite element (FE) modeling, coupled with the distributed network method, to generate the model of the converter's components and obtain the frequency behavioral model of the converter. The method has the ability to reveal the behavior of parasitic elements and higher resonances, which have critical impacts in studying EMI problems. For the EMC and signature studies of the machine drives, the equivalent source modeling was studied. Considering the details of the multi-machine environment, including actual models, some innovation in equivalent source modeling was performed to decrease the simulation time dramatically. Several models were designed in this study and the voltage current cube model and wire model have the best result. The GA-based PSO method is used as the optimization process. Superposition and suppression of the fields in coupling the components were also studied and verified. The simulation time of the equivalent model is 80-100 times lower than the detailed model. All tests were verified experimentally. As the application of EMC and signature study, the fault diagnosis and condition monitoring of an induction motor drive was developed using radiated fields. In addition to experimental tests, the 3DFE analysis was coupled with circuit-based software to implement the incipient fault cases. The identification was implemented using ANN for seventy various faulty cases. The simulation results were verified experimentally. Finally, the identification of the types of power components were implemented. The results show that it is possible to identify the type of components, as well as the faulty components, by comparing the amplitudes of their stray field harmonics. The identification using the stray fields is nondestructive and can be used for the setups that cannot go offline and be dismantled

I want out of the labels : how Chuck Palahniuk's characters challenge the dominant discourse

The purpose of this study was to explore postmodern identity in the work of Chuck Palahniuk. The characters within Palahniuk's text Invisible Monsters realize the manner in which identity is a construct, and their response is to oppose and redefine it. In my research, I looked at how postmodern identity is defined by some of the leading critical thinkers in the field, and then I applied their thought to Palahniuk's characters. I showed how these characters come to understand the process by which society defines them, and with that realization, they oppose its totalizing definitions. The characters deconstruct the natural attitudes society has towards identity, and they reveal that it is in some way possible to create a unique identity that is not easily definable by the ruling discourse. I concluded that his attention to identity highlights Palahniuk's concern for the place, identity, and influence of his generation.

Out of View: Stories

OUT OF VIEW is a collection of stories set in the American Southwest about people coping with loss—the death of parents, children, ideals, innocence. The characters in this collection reap or resist lessons of life as they struggle to find their place in the world. In “First Rain,” 15-year-old Tessie struggles with the loss of her father and the demands of her mother as she navigates the rocky terrain of adolescence. In “Monsters,” middle-aged Maury has to choose between a new relationship and protecting the well-being of his 4-year-old ‘daughter.’ The stories are influenced by the Western realism of Maile Meloy and the playful plotting of Ron Carlson. These stories are inspired both by the Sonoran Desert—expansive, sun-soaked, unrepentant—and by the people who live, love, and lose in the interstices between Manifest Destiny and the Reconquista.

Houseboats pushed out of the water by Hurricane Wilma, Flamingo

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Houseboats pushed out of the water by Hurricane Wilma, Flamingo

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Physics-Based Modeling of Power System Components for the Evaluation of Low-Frequency Radiated Electromagnetic Fields

The low-frequency electromagnetic compatibility (EMC) is an increasingly important aspect in the design of practical systems to ensure the functional safety and reliability of complex products. The opportunities for using numerical techniques to predict and analyze system’s EMC are therefore of considerable interest in many industries. As the first phase of study, a proper model, including all the details of the component, was required. Therefore, the advances in EMC modeling were studied with classifying analytical and numerical models. The selected model was finite element (FE) modeling, coupled with the distributed network method, to generate the model of the converter’s components and obtain the frequency behavioral model of the converter. The method has the ability to reveal the behavior of parasitic elements and higher resonances, which have critical impacts in studying EMI problems. For the EMC and signature studies of the machine drives, the equivalent source modeling was studied. Considering the details of the multi-machine environment, including actual models, some innovation in equivalent source modeling was performed to decrease the simulation time dramatically. Several models were designed in this study and the voltage current cube model and wire model have the best result. The GA-based PSO method is used as the optimization process. Superposition and suppression of the fields in coupling the components were also studied and verified. The simulation time of the equivalent model is 80-100 times lower than the detailed model. All tests were verified experimentally. As the application of EMC and signature study, the fault diagnosis and condition monitoring of an induction motor drive was developed using radiated fields. In addition to experimental tests, the 3DFE analysis was coupled with circuit-based software to implement the incipient fault cases. The identification was implemented using ANN for seventy various faulty cases. The simulation results were verified experimentally. Finally, the identification of the types of power components were implemented. The results show that it is possible to identify the type of components, as well as the faulty components, by comparing the amplitudes of their stray field harmonics. The identification using the stray fields is nondestructive and can be used for the setups that cannot go offline and be dismantled