The effect of mentoring electronic mail on student achievement and attitudes in a graduate course in educational research

This exploratory study of a classroom with mentoring and neutral e-mail was conducted in a public commuter state university in South Florida between January 1996 and April 1996. Sixteen males and 83 females from four graduate level educational research classes participated in the study.^ Two main hypotheses were tested. Hypothesis One was that those students receiving mentoring e-mail messages would score significantly higher on an instrument measuring attitude toward educational research (ATERS) than those not receiving mentoring e-mail messages. Hypothesis Two was that those students receiving mentoring e-mail would score significantly higher on objective exams covering the educational research material than those not receiving mentoring e-mail.^ Results of factorial analyses of variance showed no significant differences between the treatment groups in achievement or in attitudes toward educational research. Introverts had lower attitudes and lower final exam grades in both groups, although introverts in the mentored group scored higher than those introverts in the neutral group.^ A t test of the means of total response to e-mail from the researcher showed a significant difference between the mentored and neutral e-mail groups. Introverts responded more often than extraverts in both groups.^ Teacher effect was significant in determining class response to e-mail messages. Responses were most frequent in the researcher's classes.^ Qualitative analyses of the e-mail and course evaluation survey and of the content of e-mail messages received by the researcher were then grouped into basic themes and discussed.^ A qualitative analysis of an e-mail and course evaluation survey revealed that students from both the neutral and mentoring e-mail groups appreciated teacher feedback. A qualitative analysis of the mentoring and neutral e-mail replies divided the responses into those pertaining to the class, such as test and research paper questions, and more personal items, such as problems in the class and personal happenings.^ At this point in time, e-mail is not a standard way of communicating in classes in the college of education at this university. As this technology tool of communication becomes more popular, it is anticipated that replications of this study will be warranted. ^

The adoption of retail electronic commerce: An empirical investigation

The purpose of this study was to empirically investigate the adoption of retail electronic commerce (REC). REC is a business transaction which takes place over the Internet between a casual consumer and a firm. The consumer has no long-term relationship with the firm, orders a good or service, and pays with a credit card. To date, most REC applications have not been profitable. To build profitable REC applications a better understanding of the system's users is required. ^ The research model hypothesizes that the level of REC buying is dependent upon the Buying Characteristics of Internet Use and Search Experience plus the Channel Characteristics of Beliefs About Internet Vendors and Beliefs About Internet Security. The effect of these factors is modified by Time. Additional research questions ask about the different types of REC buyers, the differences between these groups, and how these groups evolved over time. ^ To answer these research questions I analyzed publicly available data collected over a three-year period by the Georgia Institute of Technology Graphics and Visualization Unit over the Internet. Findings indicate the model best predicts Number of Purchases in a future period, and that Buyer Characteristics are most important to this determination. Further, this model is evolving over Time making Buyer Characteristics predict Number of Purchases better in more recent survey administrations. Buyers clustered into five groups based on level of buying and move through various levels and buy increasing Number of Purchases over time. ^ This is the first large scale research project to investigate the evolution of REC. This implications are significant. Practitioners with casual consumer customers need to deploy a finely tuned REC strategy, understand their buyers, capitalize on the company reputation on the Internet, install an Internet-compatible infrastructure, and web-enable order-entry/inventory/fulliment/shipping applications. Researchers might wish to expand on the Buyer Characteristics of the model and/or explore alternative dependent variables. Further, alternative theories such as Population Ecology or Transaction Cost Economics might further illuminate this new I.S. research domain. ^

The correlation of structure and electronic properties near the surface of transition metal oxides

The strong couplings between different degrees of freedom are believed to be responsible for novel and complex phenomena discovered in transition metal oxides (TMOs). The physical complexity is directly responsible for their tunability. Creating surfaces/interfaces add an additional ' man-made' twist, approaching the quantum phenomena of correlated materials. ^ The dissertation focused on the structural and electronic properties in proximity of surface of three prototype TMO compounds by using three complementary techniques: scanning tunneling microscopy, angle-resolved photoelectron spectroscopy and low energy electron diffraction, particularly emphasized the effects of broken symmetry and imperfections like defects on the coupling between charge and lattice degrees of freedom. ^ Ca1.5Sr0.5RuO4 is a layered ruthenate with square lattice and at the boundary of magnetic/orbital instability in Ca2-xSrxRuO4. That the substitution of Sr 2+ with Ca2+ causing RuO6 rotation narrows the dxy band width and changes the Fermi surface topology. Particularly, the γ(dxy) Fermi surface sheet exhibited hole-like in Ca1.5Sr0.5RuO4 in contrast to electron-like in Sr2RuO4, showing a strong charge-lattice coupling. ^ Na0.75CoO2 is a layered cobaltite with triangular lattice exhibiting extraordinary thermoelectric properties. The well-ordered CoO2-terminated surface with random Na distribution was observed. However, lattice constants of the surface are smaller than that in bulk. The surface density of states (DOS) showed strong temperature dependence. Especially, an unusual shift of the minimum DOS occurs below 230 K, clearly indicating a local charging effect on the surface. ^ Cd2Re2O7 is the first known pyrochlore oxide superconductor (Tc ∼ 1K). It exhibited an unusual second-order phase transition occurring at TS1 = 200 K and a controversial first-order transition at TS2 = 120 K. While bulk properties display large anomalies at TS1 but rather subtle and sample-dependent changes at TS2, the surface DOS near the EF show no change at T s1 but a substantial increase below TS2---a complete reversal as the signature for the transitions. We argued that crystal imperfections, mainly defects, which were considerably enhanced at the surface, resulted in the transition at TS2. ^

Electronic Channels of Distributions: Challenges and Solutions for Hotel Operators

This paper addresses the issues of hotel operators identifying effective means of allocating rooms through various electronic channels of distribution. Relying upon the theory of coercive isomorphism, a think tank was constructed to identify and define electronic channels of distribution currently being utilized in the hotel industry. Through two full-day focus groups consisting of key hotel electives and industry practitioners, distribution channels wen identified as were challenges and solutions associated with each

Electronic Perception Technology Applications in Food Service

Electronic Perception Technology (EPT) enables automated equipment to gain artificial sight commonly referred to as "machine-vision” by employing specialty software and embedded sensors to create a “Visual" input field that can be used as a front-end application for transactional behavior. The authors review this new technology and present feasible future applications to the food service industry in enhancing guest services while providing a competitive advantage.

Electronic Database Support Systems for Strategic Planning Activities in the Hospitality Industry

An electronic database support system for strategic planning activities can be built by providing conceptual and system specific information. The design and development of this type of system center around the information needs of strategy planners. Data that supply information on the organization's internal and external environments must be originated, evaluated, collected, organized, managed, and analyzed. Strategy planners may use the resulting information to improve their decision making.

Electronic Channels of Distribution: Challenges and Solutions for Hotel Operators

This paper addresses the issues of hotel operators identifying effective means of allocating rooms through various electronic channels of distribution. Relying upon the theory of coercive isomorphism, a think tank was constructed to identify and define electronic channels of distribution currently being utilized in the hotel industry. Through two full-day focus groups consisting of key hotel executives and industry practitioners, distribution channels were identified as were challenges and solutions associated with each.

Development of physics-based models and design optimization of power electronic conversion systems

The main objective for physics based modeling of the power converter components is to design the whole converter with respect to physical and operational constraints. Therefore, all the elements and components of the energy conversion system are modeled numerically and combined together to achieve the whole system behavioral model. Previously proposed high frequency (HF) models of power converters are based on circuit models that are only related to the parasitic inner parameters of the power devices and the connections between the components. This dissertation aims to obtain appropriate physics-based models for power conversion systems, which not only can represent the steady state behavior of the components, but also can predict their high frequency characteristics. The developed physics-based model would represent the physical device with a high level of accuracy in predicting its operating condition. The proposed physics-based model enables us to accurately develop components such as; effective EMI filters, switching algorithms and circuit topologies [7]. One of the applications of the developed modeling technique is design of new sets of topologies for high-frequency, high efficiency converters for variable speed drives. The main advantage of the modeling method, presented in this dissertation, is the practical design of an inverter for high power applications with the ability to overcome the blocking voltage limitations of available power semiconductor devices. Another advantage is selection of the best matching topology with inherent reduction of switching losses which can be utilized to improve the overall efficiency. The physics-based modeling approach, in this dissertation, makes it possible to design any power electronic conversion system to meet electromagnetic standards and design constraints. This includes physical characteristics such as; decreasing the size and weight of the package, optimized interactions with the neighboring components and higher power density. In addition, the electromagnetic behaviors and signatures can be evaluated including the study of conducted and radiated EMI interactions in addition to the design of attenuation measures and enclosures.

Nonlinear quantum transport in low-dimensional electronic devices

The study of transport processes in low-dimensional semiconductors requires a rigorous quantum mechanical treatment. However, a full-fledged quantum transport theory of electrons (or holes) in semiconductors of small scale, applicable in the presence of external fields of arbitrary strength, is still not available. In the literature, different approaches have been proposed, including: (a) the semiclassical Boltzmann equation, (b) perturbation theory based on Keldysh's Green functions, and (c) the Quantum Boltzmann Equation (QBE), previously derived by Van Vliet and coworkers, applicable in the realm of Kubo's Linear Response Theory (LRT). ^ In the present work, we follow the method originally proposed by Van Wet in LRT. The Hamiltonian in this approach is of the form: H = H 0(E, B) + λV, where H0 contains the externally applied fields, and λV includes many-body interactions. This Hamiltonian differs from the LRT Hamiltonian, H = H0 - AF(t) + λV, which contains the external field in the field-response part, -AF(t). For the nonlinear problem, the eigenfunctions of the system Hamiltonian, H0(E, B), include the external fields without any limitation on strength. ^ In Part A of this dissertation, both the diagonal and nondiagonal Master equations are obtained after applying projection operators to the von Neumann equation for the density operator in the interaction picture, and taking the Van Hove limit, (λ → 0, t → ∞, so that (λ2 t)n remains finite). Similarly, the many-body current operator J is obtained from the Heisenberg equation of motion. ^ In Part B, the Quantum Boltzmann Equation is obtained in the occupation-number representation for an electron gas, interacting with phonons or impurities. On the one-body level, the current operator obtained in Part A leads to the Generalized Calecki current for electric and magnetic fields of arbitrary strength. Furthermore, in this part, the LRT results for the current and conductance are recovered in the limit of small electric fields. ^ In Part C, we apply the above results to the study of both linear and nonlinear longitudinal magneto-conductance in quasi one-dimensional quantum wires (1D QW). We have thus been able to quantitatively explain the experimental results, recently published by C. Brick, et al., on these novel frontier-type devices. ^

Strategic positioning of Taiwan in the outsourcing market: Evidence from information technology services and electronic manufacturing outsourcing to China

In outsourcing relationships with China, the Electronic Manufacturing (EM) and Information Technology Services (ITS) industry in Taiwan may possess such advantages as the continuing growth of its production value, complete manufacturing supply chain, low production cost and a large-scale Chinese market, and language and culture similarity compared to outsourcing to other countries. Nevertheless, the Council for Economic Planning and Development of Executive Yuan (CEPD) found that Taiwan's IT services outsourcing to China is subject to certain constraints and might not be as successful as the EM outsourcing (Aggarwal, 2003; CEPD, 2004a; CIER, 2003; Einhorn and Kriplani, 2003; Kumar and Zhu, 2006; Li and Gao, 2003; MIC, 2006). Some studies examined this issue, but failed to (1) provide statistical evidence about lower prevalence rates of IT services outsourcing, and (2) clearly explain the lower prevalence rates of IT services outsourcing by identifying similarities and differences between both types of outsourcing contexts. This research seeks to fill that gap and possibly provide potential strategic guidelines to ITS firms in Taiwan. This study adopts Transaction Cost Economics (TCE) as the theoretical basis. The basic premise is that different types of outsourcing activities may incur differing transaction costs and realize varying degrees of outsourcing success due to differential attributes of the transactions in the outsourcing process. Using primary data gathered from questionnaire surveys of ninety two firms, the results from exploratory analysis and binary logistic regression indicated that (1) when outsourcing to China, Taiwanese firms' ITS outsourcing tends to have higher level of asset specificity, uncertainty and technical skills relative to EM outsourcing, and these features indirectly reduce firms' outsourcing prevalence rates via their direct positive impacts on transaction costs; (2) Taiwanese firms' ITS outsourcing tends to have lower level of transaction structurability relative to EM outsourcing, and this feature indirectly increases firms' outsourcing prevalence rates via its direct negative impacts on transaction costs; (3) frequency does influence firms' transaction costs in ITS outsourcing positively, but does not bring impacts into their outsourcing prevalence rates, (4) relatedness does influence firms' transaction costs positively and prevalence rates negatively in ITS outsourcing, but its impacts on the prevalence rates are not caused by the mediation effects of transaction costs, and (5) firm size of outsourcing provider does not affect firms' transaction costs, but does affect their outsourcing prevalence rates in ITS outsourcing directly and positively. Using primary data gathered from face-to-face interviews of executives from seven firms, the results from inductive analysis indicated that (1) IT services outsourcing has lower prevalence rates than EM outsourcing, and (2) this result is mainly attributed to Taiwan's core competence in manufacturing and management and higher overall transaction costs of IT services outsourcing. Specifically, there is not much difference between both types of outsourcing context in the transaction characteristics of reputation and most aspects of overall comparison. Although there are some differences in the feature of firm size of the outsourcing provider, the difference doesn't cause apparent impacts on firms' overall transaction costs. The medium or above medium difference in the transaction characteristics of asset specificity, uncertainty, frequency, technical skills, transaction structurability, and relatedness has caused higher overall transaction costs for IT services outsourcing. This higher cost might cause lower prevalence rates for ITS outsourcing relative to EM outsourcing. Overall, the interview results are consistent with the statistical analyses and provide support to my expectation that in outsourcing to China, Taiwan's electronic manufacturing firms do have lower prevalence rates of IT services outsourcing relative to EM outsourcing due to higher transaction costs caused by certain attributes. To solve this problem, firms' management should aim at identifying alternative strategies and strive to reduce their overall transaction costs of IT services outsourcing by initiating appropriate strategies which fit their environment and needs.

Information Discovery on Electronic Health Records Using Authority Flow Techniques

Background As the use of electronic health records (EHRs) becomes more widespread, so does the need to search and provide effective information discovery within them. Querying by keyword has emerged as one of the most effective paradigms for searching. Most work in this area is based on traditional Information Retrieval (IR) techniques, where each document is compared individually against the query. We compare the effectiveness of two fundamentally different techniques for keyword search of EHRs. Methods We built two ranking systems. The traditional BM25 system exploits the EHRs' content without regard to association among entities within. The Clinical ObjectRank (CO) system exploits the entities' associations in EHRs using an authority-flow algorithm to discover the most relevant entities. BM25 and CO were deployed on an EHR dataset of the cardiovascular division of Miami Children's Hospital. Using sequences of keywords as queries, sensitivity and specificity were measured by two physicians for a set of 11 queries related to congenital cardiac disease. Results Our pilot evaluation showed that CO outperforms BM25 in terms of sensitivity (65% vs. 38%) by 71% on average, while maintaining the specificity (64% vs. 61%). The evaluation was done by two physicians. Conclusions Authority-flow techniques can greatly improve the detection of relevant information in EHRs and hence deserve further study.

The adoption of retail electronic commerce: an empirical investigation

The purpose of this study was to empirically investigate the adoption of retail electronic commerce (REC). REC is a business transaction which takes place over the Internet between a casual consumer and a firm. The consumer has no long-term relationship with the firm, orders a good or service, and pays with a credit card. To date, most REC applications have not been profitable. To build profitable REC applications a better understanding of the system's users is required. The research model hypothesizes that the level of REC buying is dependent upon the Buying Characteristics of Internet Use and Search Experience plus the Channel Characteristics of Beliefs About Internet Vendors and Beliefs About Internet Security. The effect of these factors is modified by Time. Additional research questions ask about the different types of REC buyers, the differences between these groups, and how these groups evolved over time. To answer these research questions I analyzed publically available data collected over a three-year period by the Georgia Institute of Technology Graphics and Visualization Unit over the Internet. Findings indicate the model best predicts Number of Purchases in a future period, and that Buyer Characteristics are most important to this determination. Further, this model is evolving over Time making Buyer Characteristics predict Number of Purchases better in more recent survey administrations. Buyers clustered into five groups based on level of buying and move through various levels and buy increasing Number of Purchases over time. This is the first large scale research project to investigate the evolution of REC. This implications are significant. Practitioners with casual consumer customers need to deploy a finely tuned REC strategy, understand their buyers, capitalize on the company reputation on the Internet, install an Internet-compatible infrastructure, and web-enable order-entry/inventory/fulfillment/ shipping applications. Researchers might wish to expand on the Buyer Characteristics of the model and/or explore alternative dependent variables. Further, alternative theories such as Population Ecology or Transaction Cost Economics might further illuminate this new I.S. research domain.

A heuristic algorithm to generate test program sequences for moving probe electronic test equipment

The electronics industry, is experiencing two trends one of which is the drive towards miniaturization of electronic products. The in-circuit testing predominantly used for continuity testing of printed circuit boards (PCB) can no longer meet the demands of smaller size circuits. This has lead to the development of moving probe testing equipment. Moving Probe Test opens up the opportunity to test PCBs where the test points are on a small pitch (distance between points). However, since the test uses probes that move sequentially to perform the test, the total test time is much greater than traditional in-circuit test. While significant effort has concentrated on the equipment design and development, little work has examined algorithms for efficient test sequencing. The test sequence has the greatest impact on total test time, which will determine the production cycle time of the product. Minimizing total test time is a NP-hard problem similar to the traveling salesman problem, except with two traveling salesmen that must coordinate their movements. The main goal of this thesis was to develop a heuristic algorithm to minimize the Flying Probe test time and evaluate the algorithm against a "Nearest Neighbor" algorithm. The algorithm was implemented with Visual Basic and MS Access database. The algorithm was evaluated with actual PCB test data taken from Industry. A statistical analysis with 95% C.C. was performed to test the hypothesis that the proposed algorithm finds a sequence which has a total test time less than the total test time found by the "Nearest Neighbor" approach. Findings demonstrated that the proposed heuristic algorithm reduces the total test time of the test and, therefore, production cycle time can be reduced through proper sequencing.

Nonlinear quantum transport in low-dimensional electronic devices

The study of transport processes in low-dimensional semiconductors requires a rigorous quantum mechanical treatment. However, a full-fledged quantum transport theory of electrons (or holes) in semiconductors of small scale, applicable in the presence of external fields of arbitrary strength, is still not available. In the literature, different approaches have been proposed, including: (a) the semiclassical Boltzmann equation, (b) perturbation theory based on Keldysh's Green functions, and (c) the Quantum Boltzmann Equation (QBE), previously derived by Van Vliet and coworkers, applicable in the realm of Kubo's Linear Response Theory (LRT). In the present work, we follow the method originally proposed by Van Vliet in LRT. The Hamiltonian in this approach is of the form: H = H°(E, B) + λV, where H0 contains the externally applied fields, and λV includes many-body interactions. This Hamiltonian differs from the LRT Hamiltonian, H = H° - AF(t) + λV, which contains the external field in the field-response part, -AF(t). For the nonlinear problem, the eigenfunctions of the system Hamiltonian, H°(E, B) , include the external fields without any limitation on strength. In Part A of this dissertation, both the diagonal and nondiagonal Master equations are obtained after applying projection operators to the von Neumann equation for the density operator in the interaction picture, and taking the Van Hove limit, (λ → 0 , t → ∞ , so that (λ2 t)n remains finite). Similarly, the many-body current operator J is obtained from the Heisenberg equation of motion. In Part B, the Quantum Boltzmann Equation is obtained in the occupation-number representation for an electron gas, interacting with phonons or impurities. On the one-body level, the current operator obtained in Part A leads to the Generalized Calecki current for electric and magnetic fields of arbitrary strength. Furthermore, in this part, the LRT results for the current and conductance are recovered in the limit of small electric fields. In Part C, we apply the above results to the study of both linear and nonlinear longitudinal magneto-conductance in quasi one-dimensional quantum wires (1D QW). We have thus been able to quantitatively explain the experimental results, recently published by C. Brick, et al., on these novel frontier-type devices.

A novel lossless compression technique for text data

The focus of this thesis is placed on text data compression based on the fundamental coding scheme referred to as the American Standard Code for Information Interchange or ASCII. The research objective is the development of software algorithms that result in significant compression of text data. Past and current compression techniques have been thoroughly reviewed to ensure proper contrast between the compression results of the proposed technique with those of existing ones. The research problem is based on the need to achieve higher compression of text files in order to save valuable memory space and increase the transmission rate of these text files. It was deemed necessary that the compression algorithm to be developed would have to be effective even for small files and be able to contend with uncommon words as they are dynamically included in the dictionary once they are encountered. A critical design aspect of this compression technique is its compatibility to existing compression techniques. In other words, the developed algorithm can be used in conjunction with existing techniques to yield even higher compression ratios. This thesis demonstrates such capabilities and such outcomes, and the research objective of achieving higher compression ratio is attained.