Analysis of global compliance and implementation of the goals of international environmental treaties: A case study of the Convention on Biodiversity (CBD)

The Convention on Biodiversity (CBD) was created in 1992 to coordinate global governments to protect biological resources. The CBD has three goals: protection of biodiversity, achievement of sustainable use of biodiversity and facilitation of equitable sharing of the benefits of biological resources. The goal of protecting biological resources has remained both controversial and difficult to implement. This study focused more on the goal of biodiversity protection. The research was designed to examine how globally constructed environmental policies get adapted by national governments and then passed down to local levels where actual implementation takes place. Effectiveness of such policies depends on the extent of actual implementation at local levels. Therefore, compliance was divided and examined at three levels: global, national and local. The study then developed various criteria to measure compliance at these levels. Both qualitative and quantitative methods were used to analyze compliance and implementation. The study was guided by three questions broadly examining critical factors that most influence the implementation of biodiversity protection policies at the global, national and local levels. Findings show that despite an overall biodiversity deficit of 0.9 hectares per person, global compliance with the CBD goals is currently at 35%. Compliance is lowest at local levels at 14%, it is slightly better at national level at 50%, and much better at the international level 64%. Compliance appears higher at both national and international levels because compliance here is paper work based and policy formulation. If implementation at local levels continues to produce this low compliance, overall conservation outcomes can only get worse than what it is at present. There are numerous weaknesses and capacity challenges countries are yet to address in their plans. In order to increase local level compliance, the study recommends a set of robust policies that build local capacity, incentivize local resource owners, and implement biodiversity protection programs that are akin to local needs and aspirations.^

Analysis of Global Compliance and Implementation of the Goals of International Environmental Treaties: A Case study of the Convention on Biodiversity (CBD)

The Convention on Biodiversity (CBD) was created in 1992 to coordinate global governments to protect biological resources. The CBD has three goals: protection of biodiversity, achievement of sustainable use of biodiversity and facilitation of equitable sharing of the benefits of biological resources. The goal of protecting biological resources has remained both controversial and difficult to implement. This study focused more on the goal of biodiversity protection. The research was designed to examine how globally constructed environmental policies get adapted by national governments and then passed down to local levels where actual implementation takes place. Effectiveness of such policies depends on the extent of actual implementation at local levels. Therefore, compliance was divided and examined at three levels: global, national and local. The study then developed various criteria to measure compliance at these levels. Both qualitative and quantitative methods were used to analyze compliance and implementation. The study was guided by three questions broadly examining critical factors that most influence the implementation of biodiversity protection policies at the global, national and local levels. Findings show that despite an overall biodiversity deficit of 0.9 hectares per person, global compliance with the CBD goals is currently at 35%. Compliance is lowest at local levels at 14%, it is slightly better at national level at 50%, and much better at the international level 64%. Compliance appears higher at both national and international levels because compliance here is paper work based and policy formulation. If implementation at local levels continues to produce this low compliance, overall conservation outcomes can only get worse than what it is at present. There are numerous weaknesses and capacity challenges countries are yet to address in their plans. In order to increase local level compliance, the study recommends a set of robust policies that build local capacity, incentivize local resource owners, and implement biodiversity protection programs that are akin to local needs and aspirations.

Deeds and Consequences: Ethical Issues in a Welfare-to-Work Program

This paper explores the impact of a lack of sensitivity to the ethical issues that surfaced in a specific welfare-to-work program on participants’ perceptions, self-esteem, and motivation. Ethical issues in three areas were identified and discussed: (a) professionalism and accountability, (b) participant and provider relationships, and (c) shared responsibilities.

Evaluation of the evidential value of the elemental composition of glass, ink and paper by laser-based microspectrochemical methods

Elemental analysis can become an important piece of evidence to assist the solution of a case. The work presented in this dissertation aims to evaluate the evidential value of the elemental composition of three particular matrices: ink, paper and glass. In the first part of this study, the analytical performance of LIBS and LA-ICP-MS methods was evaluated for paper, writing inks and printing inks. A total of 350 ink specimens were examined including black and blue gel inks, ballpoint inks, inkjets and toners originating from several manufacturing sources and/or batches. The paper collection set consisted of over 200 paper specimens originating from 20 different paper sources produced by 10 different plants. Micro-homogeneity studies show smaller variation of elemental compositions within a single source (i.e., sheet, pen or cartridge) than the observed variation between different sources (i.e., brands, types, batches). Significant and detectable differences in the elemental profile of the inks and paper were observed between samples originating from different sources (discrimination of 87–100% of samples, depending on the sample set under investigation and the method applied). These results support the use of elemental analysis, using LA-ICP-MS and LIBS, for the examination of documents and provide additional discrimination to the currently used techniques in document examination. In the second part of this study, a direct comparison between four analytical methods (µ-XRF, solution-ICP-MS, LA-ICP-MS and LIBS) was conducted for glass analyses using interlaboratory studies. The data provided by 21 participants were used to assess the performance of the analytical methods in associating glass samples from the same source and differentiating different sources, as well as the use of different match criteria (confidence interval (±6s, ±5s, ±4s, ±3s, ±2s), modified confidence interval, t-test (sequential univariate, p=0.05 and p=0.01), t-test with Bonferroni correction (for multivariate comparisons), range overlap, and Hotelling's T2 tests. Error rates (Type 1 and Type 2) are reported for the use of each of these match criteria and depend on the heterogeneity of the glass sources, the repeatability between analytical measurements, and the number of elements that were measured. The study provided recommendations for analytical performance-based parameters for µ-XRF and LA-ICP-MS as well as the best performing match criteria for both analytical techniques, which can be applied now by forensic glass examiners.

Research-to-Practice (R2P) Tools for Improving Safety in Nighttime Highway Construction Work Zones

The safety of workers in nighttime roadway work zones has become a major concern for state transportation agencies due to the increase in the number of work zone fatalities. During the last decade, several studies have focused on the improvement of safety in nighttime roadway work zones; but the element that is still missing is a set of tools for translating the research results into practice. This paper discusses: 1) the importance of translating the research results related to the safety of workers and safety planning of nighttime work zones into practice, and 2) examples of tools that can be used for translating the results of such studies into practice. A tool that can propose safety recommendations in nighttime work zones and a web-based safety training tool for workers are presented in this paper. The tools were created as a component of a five-year research study on the assessment of the safety of nighttime roadway construction. The objectives of both tools are explained as well as their functionalities (i.e., what the tools can do for the users); their components (e.g., knowledge base, database, and interfaces); and their structures (i.e., how the components of the tools are organized to meet the objectives). Evaluations by the proposed users of each tool are also presented.

Generational Differences in Work Attitudes: Evidence from the Hospitality Industry

Our understanding of employee attitudes and their impact on business outcomes has been further complicated in recent years by the newest cohort of service workers. Known as Generation Y (Gen Y), they appear to approach employment in a manner different to that of their predecessors. A review of the academic literature reveals little empirical evidence to support an appropriate understanding of the impact of such difference. This paper provides an overview of a large-scale study into generational differences in employee attitudes and reports on the preliminary data analysis of a survey of over 900 hospitality employees. The most important initial finding from the data analysis is that, on the whole, Gen Y employees have lower scores on those constructs that an organization should be attempting to maximize. Non-Gen Y employees are more satisfied with their jobs, more engaged and more affectively committed to the organization they work for than their Gen Y counterparts, amongst a range of other important constructs. Conversely, Gen Y employees display higher scores onthe constructs that an organization would want to minimize in its staff. Gen Y employees are more likely to be planning to quit their jobs, are more likely to perform poorly if their co-workers are doing so, and are also more likely to switch jobs for no particular reason. The discussion covers implications for management as well as directions for future research.