Public Service Motivation in Public and Nonprofit Service Providers: The Cases of Belarus and Poland

The work motivation construct is central to the theory and practice of many social science disciplines. Yet, due to the novelty of validated measures appropriate for a deep cross-national comparison, studies that contrast different administrative regimes remain scarce. This study represents an initial empirical effort to validate the Public Service Motivation (PSM) instrument proposed by Kim and colleagues (2013) in a previously unstudied context. The two former communist countries analyzed in this dissertation—Belarus and Poland— followed diametrically opposite development strategies: a fully decentralized administrative regime in Poland and a highly centralized regime in Belarus. The employees (n = 677) of public and nonprofit organizations in the border regions of Podlaskie Wojewodstwo (Poland) and Hrodna Voblasc (Belarus) are the subjects of study. Confirmatory factor analysis revealed three dimensions of public service motivation in the two regions: compassion, self-sacrifice, and attraction to public service. The statistical models tested in this dissertation suggest that nonprofit sector employees exhibit higher levels of PSM than their public sector counterparts. Nonprofit sector employees also reveal a similar set of values and work attitudes across the countries. Thus, the study concludes that in terms of PSM, employees of nonprofit organizations constitute a homogenous group that exists atop the administrative regimes. However, the findings propose significant differences between public sector agencies across the two countries. Contrary to expectations, data suggest that organization centralization in Poland is equal to—or for some items even higher than—that of Belarus. We can conclude that the absence of administrative decentralization of service provision in a country does not necessarily undermine decentralized practices within organizations. Further analysis reveals strong correlations between organization centralization and PSM for the Polish sample. Meanwhile, in Belarus, correlations between organization centralization items and PSM are weak and mostly insignificant. The analysis indicates other factors beyond organization centralization that significantly impact PSM in both sectors. PSM of the employees in the studied region is highly correlated with their participation in religious practices, political parties, or labor unions as well as location of their organization in a capital and type of social service provided.

Public service motivation in public and nonprofit service providers: The cases of Belarus and Poland

The work motivation construct is central to the theory and practice of many social science disciplines. Yet, due to the novelty of validated measures appropriate for a deep cross-national comparison, studies that contrast different administrative regimes remain scarce. This study represents an initial empirical effort to validate the Public Service Motivation (PSM) instrument proposed by Kim and colleagues (2013) in a previously unstudied context. The two former communist countries analyzed in this dissertation—Belarus and Poland—followed diametrically opposite development strategies: a fully decentralized administrative regime in Poland and a highly centralized regime in Belarus. The employees (n = 677) of public and nonprofit organizations in the border regions of Podlaskie Wojewodstwo (Poland) and Hrodna Voblasc (Belarus) are the subjects of study. ^ Confirmatory factor analysis revealed three dimensions of public service motivation in the two regions: compassion, self-sacrifice, and attraction to public service. The statistical models tested in this dissertation suggest that nonprofit sector employees exhibit higher levels of PSM than their public sector counterparts. Nonprofit sector employees also reveal a similar set of values and work attitudes across the countries. Thus, the study concludes that in terms of PSM, employees of nonprofit organizations constitute a homogenous group that exists atop the administrative regimes. ^ However, the findings propose significant differences between public sector agencies across the two countries. Contrary to expectations, data suggest that organization centralization in Poland is equal to—or for some items even higher than—that of Belarus. We can conclude that the absence of administrative decentralization of service provision in a country does not necessarily undermine decentralized practices within organizations. Further analysis reveals strong correlations between organization centralization and PSM for the Polish sample. Meanwhile, in Belarus, correlations between organization centralization items and PSM are weak and mostly insignificant. ^ The analysis indicates other factors beyond organization centralization that significantly impact PSM in both sectors. PSM of the employees in the studied region is highly correlated with their participation in religious practices, political parties, or labor unions as well as location of their organization in a capital and type of social service provided.^

Assessing the effectiveness of five-year mechanical engineering technology programs of junior colleges in Taiwan, R.O.C.: An application of the CIPP evaluation model

The purpose of this study was to evaluate the mechanical engineering technology curriculum effectiveness at the junior college in Taiwan by using the CIPP evaluation model. The study concerned the areas of the curriculum, curriculum materials, individualized instruction, support services, teaching effectiveness, student achievement, and job performance. A descriptive survey method was used with questionnaires for data collection from faculty, students, graduates, and employers.^ All categories of respondents tended to agree that the curriculum provides appropriate occupational knowledge and skills. Students, graduates, and faculty tended to be satisfied with the curriculum; faculty tended to be satisfied with student achievement; graduates tended to be satisfied with their job preparation; and employers were most satisfied with graduates' job performance.^ Conclusions were drawn in the context, input, process, and product of the CIPP model. In Context area: Students were dissatisfied with curriculum flexibility in students characteristics. Graduates were dissatisfied with curriculum design for student's adaptability in new economic and industrial conditions; practicum flexibility in student characteristics; and course overlap. Both students and graduates were dissatisfied with practicum credit hours. Both faculty and students were dissatisfied with the number of required courses.^ In Input area: Students, faculty, and graduates perceived audiovisuals and manipulative aids positively. Faculty and students perceive CAI implementation positively. Students perceived textbooks negatively.^ In Process area: Faculty, students, and graduates perceived all support service negatively. Faculty tended to perceive the ratios of graduates who enter advanced study and related occupation, and who passed the professional skills certification, negatively. Students tended to perceive teaching effectiveness in terms of instructional strategies, the quality of instruction, overall suitability, and receivable, negatively. Graduates also tended to identify the instructional strategies as a negative perception. Faculty and students perceived curriculum objectives and practicum negatively. Both faculty and students felt that instructors should be more interested in making the courses a useful learning experience.^ In Product area: Employers were satisfied with graduates' academic preparation and job performance, adaptability, punctuality, and their ability to communicate, cooperate, and meet organization needs. Graduates were weak in terms of equipment familiarity and supervisory ability.^ In sum, the curriculum of the five-year mechanical engineering technology programs of junior college in Taiwan has served adequately up to this time in preparing a work force to enter industry. It is now time to look toward the future and adapt the curriculum and instruction for the future needs of this high-tech society. ^

Reformed county government structure and service delivery performance: An integrated study of Florida counties

The most fundamental and challenging function of government is the effective and efficient delivery of services to local taxpayers and businesses. Counties, once known as the “dark continent” of American government, have recently become a major player in the provision of services. Population growth and suburbanization have increased service demands while the counties' role as service provider to incorporated residents has also expanded due to additional federal and state mandates. County governments are under unprecedented pressure and scrutiny to meet citizens' and elected officials' demands for high quality, and equitable delivery of services at the lowest possible cost while contending with anti-tax sentiments, greatly decreased state and federal support, and exceptionally costly and complex health and public safety problems. ^ This study tested the reform government theory proposition that reformed structures of county government positively correlate with efficient service delivery. A county government reformed index was developed for this dissertation comprised of form of government, home-rule status, method of election, number of government jurisdictions, and number of elected officials. The county government reform index and a measure of relative structural fragmentation were used to assess their impact on two measures of service output: mean county road pavement condition and county road maintenance expenditures. The study's multi-level design triangulated results from different data sources and methods of analysis. Data were collected from semi-structured interviews of county officials, secondary archival sources, and a survey of 544 elected and appointed officials from Florida's 67 counties. The results of the three sources of data converged in finding that reformed Florida counties are more likely than unreformed counties to provide better road service and to spend less on road expenditures. The same results were found for unfragmented Florida counties. Because both the county government reform index and the fragmentation variables were specified acknowledging the reform theory as well as elements from the public-choice model, the results help explain contradicting findings in the urban service research. ^ Therefore, as suggested by the corroborated findings of this dissertation, reformed as well as unfragmented counties are better providers of road maintenance service and do so in a less costly manner. These findings hold although the variables were specified to capture theoretical arguments from the consolidated as well as the public-choice theories suggesting a way to advance the debate from the consolidated-fragmented dichotomy of urban governance. ^

Elemental analysis of glass and ink by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and laser induced breakdown spectroscopy (LIBS)

The necessity of elemental analysis techniques to solve forensic problems continues to expand as the samples collected from crime scenes grow in complexity. Laser ablation ICP-MS (LA-ICP-MS) has been shown to provide a high degree of discrimination between samples that originate from different sources. In the first part of this research, two laser ablation ICP-MS systems were compared, one using a nanosecond laser and another a femtosecond laser source for the forensic analysis of glass. The results showed that femtosecond LA-ICP-MS did not provide significant improvements in terms of accuracy, precision and discrimination, however femtosecond LA-ICP-MS did provide lower detection limits. In addition, it was determined that even for femtosecond LA-ICP-MS an internal standard should be utilized to obtain accurate analytical results for glass analyses. In the second part, a method using laser induced breakdown spectroscopy (LIBS) for the forensic analysis of glass was shown to provide excellent discrimination for a glass set consisting of 41 automotive fragments. The discrimination power was compared to two of the leading elemental analysis techniques, μXRF and LA-ICP-MS, and the results were similar; all methods generated >99% discrimination and the pairs found indistinguishable were similar. An extensive data analysis approach for LIBS glass analyses was developed to minimize Type I and II errors en route to a recommendation of 10 ratios to be used for glass comparisons. Finally, a LA-ICP-MS method for the qualitative analysis and discrimination of gel ink sources was developed and tested for a set of ink samples. In the first discrimination study, qualitative analysis was used to obtain 95.6% discrimination for a blind study consisting of 45 black gel ink samples provided by the United States Secret Service. A 0.4% false exclusion (Type I) error rate and a 3.9% false inclusion (Type II) error rate was obtained for this discrimination study. In the second discrimination study, 99% discrimination power was achieved for a black gel ink pen set consisting of 24 self collected samples. The two pairs found to be indistinguishable came from the same source of origin (the same manufacturer and type of pen purchased in different locations). It was also found that gel ink from the same pen, regardless of the age, was indistinguishable as were gel ink pens (four pens) originating from the same pack.

Customer Perception of Drive-Thru Service

The rapid growth of off-premise dining and, consequently, drive- thru service, presents the challenge of building customer loyalty in a highly competitive marketplace. In this study, customer perceptions of drive-thru service associated with quick service restaurants were examined. Results suggest that service time appears to differ among quick service restaurants, even those within the same chain. Employee courtesy was rated positively at all restaurants, as was food quality. The implications of these results for restaurateurs who offer drive-thru service are discussed.

An interview study of community college student perspectives on service -learning

Over the past two decades, the community college in the United States has boasted a leadership role in the movement to make education community-based and performance-oriented. This has led to an intensification in attempts to search for more innovative means to make education more experiential and relevant to students' lived experiences. ^ One such innovative program that holds promise to meet this challenge is service-learning. This paradigm attempts to relate the academic education in the classroom to community-based problems, which fits in neatly with the community-based characteristics of the community college. It promises to link ideas developed in the classroom and their practical application within the community through guided reflection. It is designed to enhance and enrich student learning of course material by combining citizenship, academic subjects, skills, and values. ^ Though many studies have been carried out in regard to the outcomes of service-learning through quantitative means, relatively few qualitative studies are available, and those available have primarily studied traditional students at four-year residential colleges or universities. Therefore, there is an urgent need to study non-traditional students' perspectives at the community college level. ^ The purpose of this study was to describe and explain the perspectives of five students at Broward Community College, Central Campus, Ft. Lauderdale, Florida. The following exploratory questions guided this study: (1) What elements constitute these students' perspectives? (2) What variables influence their perspectives? (3) What beliefs do these students hold about their service-learning experience which support or are contrary to their perspectives? ^ This ethnographic interview study was conducted over a period of twelve months and consisted of three interviews for each of the five participants. The analysis of the data was conducted following the stringent principles of ethnographic research which included constant comparative analysis. The interviews were tape recorded with the participants' permission, transcribed verbatim, and organized into categories for in-depth understanding. Furthermore, these categories were developed from the data collected and an organizational scheme for understanding and interpreting of these perspectives emerged. The researcher, as well, kept a reflective journal of the research process as part of the data set. ^ The results of this study show the need for a better grasp of the concepts of service-learning on the part of all involved with its implementation. In spite of this, all of the participants displayed gains to a greater or lesser degree in personal growth, academic skills, and citizenship skills. ^

Developing a Data-Driven Classification of South Florida Plant Communities

A comprehensive, broadly accepted vegetation classification is important for ecosystem management, particularly for planning and monitoring. South Florida vegetation classification systems that are currently in use were largely arrived at subjectively and intuitively with the involvement of experienced botanical observers and ecologists, but with little support in terms of quantitative field data. The need to develop a field data-driven classification of South Florida vegetation that builds on the ecological organization has been recognized by the National Park Service and vegetation practitioners in the region. The present work, funded by the National Park Service Inventory and Monitoring Program - South Florida/Caribbean Network (SFCN), covers the first stage of a larger project whose goal is to apply extant vegetation data to test, and revise as necessary, an existing, widely used classification (Rutchey et al. 2006). The objectives of the first phase of the project were (1) to identify useful existing datasets, (2) to collect these data and compile them into a geodatabase, (3) to conduct an initial classification analysis of marsh sites, and (4) to design a strategy for augmenting existing information from poorly represented landscapes in order to develop a more comprehensive south Florida classification.

An interview study of community college student perspectives on service-learning

Over the past two decades, the community college in the United States has boasted a leadership role in the movement to make education community-based and performance-oriented. This has led to an intensification in attempts to search for more innovative means to make education more experiential and relevant to students' lived experiences. One such innovative program that holds promise to meet this challenge is service- learning. This paradigm attempts to relate the academic education in the classroom to community-based problems, which fits in neatly with the community-based characteristics of the community college. It promises to link ideas developed in the classroom and their practical application within the community through guided reflection. It is designed to enhance and enrich student learning of course material by combining citizenship, academic subjects, skills, and values. Though many studies have been carried out in regard to the outcomes of service-learning through quantitative means, relatively few qualitative studies are available, and those available have primarily studied traditional students at four-year residential colleges or universities. Therefore, there is an urgent need to study non-traditional students' perspectives at the community college level. The purpose of this study was to describe and explain the perspectives of five students at Broward Community College, Central Campus, Ft. Lauderdale, Florida. The following exploratory questions guided this study: 1. What elements constitute these students' perspectives? 2. What variables influence their perspectives? 3. What beliefs do these students hold about their service-learning experience which support or are contrary to their perspectives? This ethnographic interview study was conducted over a period of twelve months and consisted of three interviews for each of the five participants. The analysis of the data was conducted following the stringent principles of ethnographic research which included constant comparative analysis. The interviews were tape recorded with the participants' permission, transcribed verbatim, and organized into categories for in-depth understanding. Furthermore, these categories were developed from the data collected and an organizational scheme for understanding and interpreting of these perspectives emerged. The researcher, as well, kept a reflective journal of the research process as part of the data set. The results of this study show the need for a better grasp of the concepts of service-learning on the part of all involved with its implementation. In spite of this, all of the participants displayed gains to a greater or lesser degree in personal growth, academic skills, and citizenship skills.

Perceived Value of Fast-food Restaurant Franchises in the USA

The main research objective of this study was to find out whether perceived value significantly affects consumers’ purchase intention. Additionally, this study examined if there are any significant differences in perceived value for different fast-food restaurant brands and attempted to identify which fast-food restaurant is perceived to be the industry leader. A total number of six fast-food restaurants (McDonalds, Subway, Starbucks, Wendy’s, Burger King, and Taco Bell) were selected. Findings showed that among the five perceived service value dimensions, Starbucks is the leader in terms of quality, emotional response, and reputation. Multivariate analysis of variance (MANOVA) and multiple regression analysis were performed to test the study hypotheses. Results indicated that there were significant differences in perceived value for different fast-food restaurant brands. Besides, monetary and behavioral price significantly affects consumers’ purchase intention. Findings are expected to help hospitality marketers to strategically manage their brands.

Elemental Analysis of Glass and Ink by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) and Laser Induced Breakdown Spectroscopy (LIBS)

The necessity of elemental analysis techniques to solve forensic problems continues to expand as the samples collected from crime scenes grow in complexity. Laser ablation ICP-MS (LA-ICP-MS) has been shown to provide a high degree of discrimination between samples that originate from different sources. In the first part of this research, two laser ablation ICP-MS systems were compared, one using a nanosecond laser and another a femtosecond laser source for the forensic analysis of glass. The results showed that femtosecond LA-ICP-MS did not provide significant improvements in terms of accuracy, precision and discrimination, however femtosecond LA-ICP-MS did provide lower detection limits. In addition, it was determined that even for femtosecond LA-ICP-MS an internal standard should be utilized to obtain accurate analytical results for glass analyses. In the second part, a method using laser induced breakdown spectroscopy (LIBS) for the forensic analysis of glass was shown to provide excellent discrimination for a glass set consisting of 41 automotive fragments. The discrimination power was compared to two of the leading elemental analysis techniques, µXRF and LA-ICP-MS, and the results were similar; all methods generated >99% discrimination and the pairs found indistinguishable were similar. An extensive data analysis approach for LIBS glass analyses was developed to minimize Type I and II errors en route to a recommendation of 10 ratios to be used for glass comparisons. Finally, a LA-ICP-MS method for the qualitative analysis and discrimination of gel ink sources was developed and tested for a set of ink samples. In the first discrimination study, qualitative analysis was used to obtain 95.6% discrimination for a blind study consisting of 45 black gel ink samples provided by the United States Secret Service. A 0.4% false exclusion (Type I) error rate and a 3.9% false inclusion (Type II) error rate was obtained for this discrimination study. In the second discrimination study, 99% discrimination power was achieved for a black gel ink pen set consisting of 24 self collected samples. The two pairs found to be indistinguishable came from the same source of origin (the same manufacturer and type of pen purchased in different locations). It was also found that gel ink from the same pen, regardless of the age, was indistinguishable as were gel ink pens (four pens) originating from the same pack.