Comportamento mecânico e biológico de implante dentário com interface cônica interna

The general aim of this study was to evaluate the conical interface of pilar/implant. The specific aims were to evaluate the influence of hexagonal internal index in the microleakage and mechanical strength of Morse taper implants; the effect of axial loading on the deformation in cervical region of Morse taper implants of different diameters through strain gauge; the effect of axial loading in cervical deformation and sliding of abutment into the implant by tridimensional measurements; the integrity of conical interface before and after dynamic loading by microscopy and microleakage; and the stress distribution in tridimensional finite element models of Morse taper implants assembled with 2 pieces abutment. According to the obtained results, could be concluded that the diameter had influence in the cervical deformation of Morse taper implants; the presence of internal hexagonal index in the end of internal cone of implant didn´t influenced the bacterial microleakage under static loading neither reduced the mechanical strength of implants; one million cycles of vertical and off-center load had no negative influence in Morse taper implant integrity.

Inter-relação entre lesão cervical não cariosa e comprometimento periodontal: diagnóstico, tratamento e previsibilidade - estudo clínico prospectivo e laboratorial

The coexistence of gingival recession (GR) with root coverage indication and non-carious cervical lesions (LCNC) generates the need for a protocol that respects and promotes health of dental and periodontal tissues and allows treatment predictability. The main objectives of this theses were: (1) verify, through clinical evaluations, the connective tissue graft for root coverage on direct and indirect restorations made of ceramic resin; (2) analyze the influence of the battery level of the LED curing unit in the composite resin characteristics; (3) assess the influence of restorative materials, composite resin and ceramics, on the viability of gingival fibroblasts from primary culture. Nine patients with good oral hygiene and occlusal stability diagnosed with LCNCs the anterior teeth including premolars associated with gingival recession (class I and II of Miller) and only gingival recession were selected. After initial clinical examination, occlusal adjustment was performed and the patients had their teeth randomized allocated on direct composite resin restoration of LCNC, polishing and GR treatment with connective tissue graft and advanced coronally flap CR group (n = 15); and indirect ceramic restoration of the LCNC's and GR treatment (CTG+CAF) Group C (n = 15). The GR presented teeth with no clinically formed LCNCs cavity were treated using (CTG+CAF) being the control group (n = 15). Sorption and solubility tests, analysis of the degree of conversion and diametral tensile strength were performed in composite resin samples (n = 10) photoactivated by 100, 50 and 10% battery charge LED unit. The viability of fibroblasts on composite resin, ceramics and dentin disks (n = 3) was examined. Clinical follow-up was performed for three months. The data obtained at different stages were tabulated and subjected to analysis for detection of normal distribution and homogeneity. The results showed that: the LED unit with 10% battery affects the characteristics of the composite resin; restorative materials present biocompatibility with gingival fibroblasts; and the association of surgical and restorative treatment of teeth affected by NCCL and GR presents successful results at 3-month follow-up.

Serious Game no tratamento de obesidade infantil: uma proposta de interação natural com monitoramento remoto

The number of overweight people has increased in the last few years. Factors such as attention to diet and changes in lifestyle are crucial in the prevention and control of obesity and diseases related to it. Experts believe that such actions are most effective when initiated during childhood, and that children raised in an environment that encourages physical activity ultimately become healthier adults. However, to arouse and maintain interest in such activities represent a major challenge, which are initially perceived as repetitive and boring, and, thus, soon abandoned. Computer games, traditionally seen as stimulants to a sedentary lifestyle are changing this perception using non-conventional controls that require constant movement of the player. Applications that combine the playfulness of such games to physical activity through devices, like Microsoft Kinect, might become interesting tools in this scenario, by using the familiarity of Natural User Interfaces along with the challenge and the fun of video games, in order to make attractive exercise routines for schoolchildren. The project carried out consists of an exergame composed of several activities designed and implemented with the participation of a Physical Educator, aimed at children between eight and ten years old, whose performance and progress can be remotely monitored by a professional via web interface. The application arising from this work was accompanied by tests with a group of graduating Physical Education students from the University of Rio Verde GO, and subsequently validated through questionnaires whose results are shown on this work.

Avaliação tribológica de novas modificações superficiais para cilindros de laminação a frio

The present work analyzed the tribological behavior of coatings/surface modifications traditionally used in cold rolling mill rolls and new coatings/surface modificationswith potential to replace the carcinogenic hard chrome. The study started with identification of wear mechanisms occurring in real coldrollingmill rolls. Due the high cost and dimensions of the rolls, thereplication technique was used. Replicas were obtained from 4 different rolling millBrazilian companies before and after a normal rolling campaign. Initial sliding tests were conducted using spherical and cylindrical counter bodies in order to verifywhichtribological conditions allowed to reproduce the wear mechanisms found in the replicas. These tests indicated the use of reciprocating sliding tests with cylindrical counter bodies (line contact), normal load of 100 N, and test times of and 1 h and 5 h. Different surface modifications were carried out on samples produced from a fragment of a rolling mill roll. The specimens were heat treated and ground on both sides. After, some specimens were surface textured by electrical discharge texturing (EDT). For both groups (ground and EDT), subsequent treatments of chromium plating, electroless NiP coating and plasma nitriding were carried out. The results of the reciprocating tests showed that specimens with electroless NiP coating presented the lowest friction coefficients, while plasma nitrided specimens showed the highest. In general, previous surface texturing before the coating/surface modification increased the wear of the counter bodies. Oneexceptionwas for EDT with subsequent electroless NiP coating, which presented the lowest counter bodies wear rate. The samples withelectroless NiP coating promoted a tribolayer consisting of Nickel, Phosphorus and Oxygen on both the specimens andthecounter bodies, which was apparently responsible for the reduction of friction coefficient and wear rate. The increase of the test time reduced the wear rate of the samples, apparently due the stability of the tribolayers formed, except for the nitrided samples. For the textured specimens, NiP coating showed the best performance in maintaining the surface topography of the specimens after the sliding tests.

A Influência do endosso de blogueiras no comportamento das consumidoras de moda no Brasil

The study about the celebrity endorsement has relevance for both the academia and businesses seeking to retain and attract customers through marketing communications. However, most researches conducted analyzes celebrities from the artistic or sports, and study the endorsement in print media or on TV. Few studies analyze the endorsement of influencers in social media. Observing this gap, the aim of this study is to verify if the endorsement of fashion bloggers influence on purchase intention of Brazilian consumers. In addition, other factors were analyzed for better understanding of the fashion consumer behavior: evaluation of the product, brand awareness, brand loyalty, product quality, involvement with fashion, and credibility of the endorser. Therefore, it held two studies. The first consisted of a qualitative exploratory research, which used focus groups to identify and understand how social media affect the behavior of consumers of fashion products. Among the main results of this study, we highlight the Instagram appointed unanimously as the main social media used by respondents for information on fashion, and the mention of blogger Thássia Naves as the main source of fashion reference in social media. In the second study was undertaken an experiment in which half of the sample had access to the image of a dress used by the blogger Thássia Naves on her Instagram, while the other half had access to dress image disclosed at the online store website of the product brand. The number of valid responses considered for the study was 465. To test the hypotheses of the study, we applied the t test for independent samples and ANOVA test for more than two groups. The survey results supported 5 of 8 hypotheses proposed. which were: The endorsement of the fashion blogger has a positive effect on purchase intention of the endorsed product (H1); The endorsement of the fashion blogger has a positive effect on the evaluation of the endorsed product (H2); The credibility of the fashion blogger has a positive effect on purchase intention of the endorsed product (H3); The credibility of the fashion blogger has a positive effect on the evaluation of the endorsed product (H4); and the credibility of the fashion blogger has a positive effect on brand awareness (H5). The other hypotheses have been disproved: The credibility of the fashion blogger has a positive effect on brand loyalty (H6); The credibility of the fashion blogger has a positive effect on the perception of quality (H7); and the credibility of the fashion blogger has a positive effect on involvement with fashion (H8).Within the scope of further analysis, it was found that involvement with fashion positively interfere in purchase intent, the evaluation of the product, brand awareness, loyalty to the brand, the pursuit of product quality and credibility of the endorser. Moreover, it was found that the frequency of access to Instagram for fashion information positively affects the purchase intention, in evaluating the product, the brand awareness in brand loyalty, involvement with fashion, and credibility endorser.