Entrepreneurship and innovation through experience:student and employer perspectives of the value of work-based learning in promoting entrepreneurialism

The 'internationalisation' of Business and Management education, reflective of EU enlargement and the unprecedented globalisation of education, has resulted in growing numbers of overseas students adding a diversity and richness to the learning environment within many contemporary European Higher Educational Institutions (Green, 2006, Sliwa & Grandy, 2006). However, cross-national studies analyzing the impact that the internationalisation of business education has on the employability of business and management graduates are rare. Furthermore, there exists a notable gap in research aimed at identifying and conceptualising the generic business skills and competencies required by European employers of business and management graduates. By proposing a conceptual framework based upon a working model of business graduate employability, this goes some way to addressing this gap.

An interpretive approach to analysing the role and value of information systems in Jordanian financial organisations

Analysing investments in ISs in order to maximise benefits has become a prime concern, especially for private corporations. No formula of equilibrium exists that could link the injected amounts and accrued returns. The relationship is simply not straightforward. This thesis is based upon empirical work which involved sketching organisational ethnographies (four organographies and a sectography) into the role and value of information systems in Jordanian financial organisations. Besides deciphering the map of impacts, it explains the attributions of the variations in the impacts of ISs which were found to be related to the internal organisational processes: culturally and politically specific considerations, economically or technically rooted factors and environmental factors. The research serves as an empirical attempt to test out the applicability of adopting the interpretive paradigm to researching organisations in a developing country. The fieldwork comprised an exploratory stage, a detailed investigation of four case studies and a survey stage encompassing 16 organisations. Primary and secondary data were collected from multiple sources using a range of instruments. The evidence highlights the fact that little long term strategic planning was pursued; the emphasis was more focused on short term planning. There was no noticeable adoption of any strategic fit principle linking IS strategy to the corporate strategy. In addition, the benefits obtained were mostly intangible. Although ISs were central to the work of the organisations surveyed as the core technology, they were considered as tools or work enablers rather than weapons for competitive rivalry. The cultural specificity of IS impacts was evident and the cultural and political considerations were key factors in explaining the attributions of the variations in the impacts of ISs in JFOs. The thesis confirms that measuring the benefits of ISs is the problematic. However, in order to gain more insight, the phenomenon of "the use of ISs" has to be studied within its context.

The changing roles of production and operations managers in Britain from the 1970s to the 1990s

This article examines the careers and changing roles of British production and operations managers through three surveys covering the last quarter of the twentieth century. Careers are examined in terms of both their organisational context and the subjective experiences of those who have chosen this field, during a period of great turbulence for manufacturing due to growing global competition. The persistent features of such roles and responsibilities are contrasted with the changes in focus and demands. The managers' sources of satisfaction and frustration are outlined as are their perceptions of their situation in relation to managers in other areas. The article concludes by considering what has changed and what needs to change, in order for manufacturing to gain maximum benefit from the contribution of these managers.

Estimating the value of victory:English football

Professional English football combines publicly traded ownership shares with an active and observable wagering market. This article utilizes the information from these markets, presenting a model that may be used to estimate the impact of matches on club values. Such information is potentially useful as clubs assess the values of players and coaches based on their anticipated contributions to team performance. The article also illustrates the modelling of ‘binomial events,’ such as win/lose, hire/do not hire or approval/disapproval, and how market-determined price responses illuminate expectations.

Quid pro quo:reflections on the value of problem structuring workshops

Attracting clients who are willing to invest in using a problem structuring method (PSM) can be particularly difficult for the emerging generation of modellers. There are many reasons for this, not least that the benefits of a problem structuring intervention are vague and evidence of benefits are often anecdotal for example, claims of constructing a deeper understanding of the problem or building the commitment of a group to implementing an outcome. This paper contributes to the evaluation of problem structuring methods by reflecting on the quid pro quo that a client and problem structuring modeller can enjoy from collaboration. The paper reflects on 21 cases, where Journey Making (a problem structuring method) was used with 16 organizations to help managers agree a suite of actions to tackle a complex strategic issue. The reflections are clustered around those benefits that pertain to: PSMs in general; PSMs that use computer-supported workshops; the Journey Making methodology.

Studies on the composition and nutritional value of the cultivated mushroom, agaricus bisporus (Lange) Sing

The effects of various cultural conditions on the composition and nutritional quality of Agaricus bisporus (Lange) Sing. were investigated. Variation in composition was found between different classes of sample. Sampling techniques were standardised to allow for major variations in the different developmental stages and culture ages. Fruitbodies were found to be of low calorific value but contained protein of high digestibility and quality, containing all the essential amino acids required by man. Quantitative estimates of the sulphur-containing amino acids indicated that fruitbodies were deficient in methionine and cysteine. The extent of water application and the supplementation of conventional substrates with various nitrogen-containing substances, influenced yield and composition, establishing the importance of these two factors in the physiology of fruitbodies and cultural management. Storage conditions influenced composition, high temperatures being deleterious to the nutritional value of fruitbodies. Submerged culture techniques were used to investigate the effects of various nutrients on growth and composition of mushroom mycelium, with special reference to the sulphur-containing amino acids. Yield and composition were greatly affected by the carbon:nitrogen ratio of the medium and by the nitrogen source. Significant increases in mycelial methionine content were observed on the addition of inorganic sulphate, the methionine derivative N-acetyl-L-methionine, and L-methionine. A greater increase in methionine content was obtained when the biomass of a thermophilic bacterium isolated from compost was used as a nitrogen source.

A Generic model for the design and analysis of production systems

This dissertation studies the process of operations systems design within the context of the manufacturing organization. Using the DRAMA (Design Routine for Adopting Modular Assembly) model as developed by a team from the IDOM Research Unit at Aston University as a starting point, the research employed empirically based fieldwork and a survey to investigate the process of production systems design and implementation within four UK manufacturing industries: electronics assembly, electrical engineering, mechanical engineering and carpet manufacturing. The intention was to validate the basic DRAMA model as a framework for research enquiry within the electronics industry, where the initial IDOM work was conducted, and then to test its generic applicability, further developing the model where appropriate, within the other industries selected. The thesis contains a review of production systems design theory and practice prior to presenting thirteen industrial case studies of production systems design from the four industry sectors. The results and analysis of the postal survey into production systems design are then presented. The strategic decisions of manufacturing and their relationship to production systems design, and the detailed process of production systems design and operation are then discussed. These analyses are used to develop the generic model of production systems design entitled DRAMA II (Decision Rules for Analysing Manufacturing Activities). The model contains three main constituent parts: the basic DRAMA model, the extended DRAMA II model showing the imperatives and relationships within the design process, and a benchmark generic approach for the design and analysis of each component in the design process. DRAMA II is primarily intended for use by researchers as an analytical framework of enquiry, but is also seen as having application for manufacturing practitioners.

Aspects of the design and operation of production control systems in manufacturing industry

Computerised production control developments have concentrated on Manufacturing Resources Planning (MRP II) systems. The literature suggests however, that despite the massive investment in hardware, software and management education, successful implementation of such systems in manufacturing industries has proved difficult. This thesis reviews the development of production planning and control systems, in particular, investigates the causes of failures in implementing MRP/MRP II systems in industrial environments and argues that the centralised and top-down planning structure, as well as the routine operational methodology of such systems, is inherently prone to failure. The thesis reviews the control benefits of cellular manufacturing systems but concludes that in more dynamic manufacturing environments, techniques such as Kanban are inappropriate. The basic shortcomings of MRP II systems are highlighted and a new enhanced operational methodology based on distributed planning and control principles is introduced. Distributed Manufacturing Resources Planning (DMRP), was developed as a capacity sensitive production planning and control solution for cellular manufacturing environments. The system utilises cell based, independently operated MRP II systems, integrated into a plant-wide control system through a Local Area Network. The potential benefits of adopting the system in industrial environments is discussed and the results of computer simulation experiments to compare the performance of the DMRP system against the conventional MRP II systems presented. DMRP methodology is shown to offer significant potential advantages which include ease of implementation, cost effectiveness, capacity sensitivity, shorter manufacturing lead times, lower working in progress levels and improved customer service.

Cost effectiveness of production control systems

This thesis deals with the problems associated with the planning and control of production, with particular reference to a small aluminium die casting company. The main problem areas were identified as: (a) A need to be able to forecast the customers demands upon the company's facilities. (b) A need to produce a manufacturing programme in which the output of the foundry (or die casting section) was balanced with the available capacity in the machine shop. (c) The need to ensure that the resultant system enabled the company's operating budget to have a reasonable chance of being achieved. At the commencement of the research work the major customers were members of the automobile industry and had their own system of forecasting, from which they issued manufacturing schedules to their component suppliers, The errors in the forecast were analysed and the distributions noted. Using these distributions the customer's forecast was capable of being modified to enable his final demand to be met with a known degree of confidence. Before a manufacturing programme could be developed the actual manufacturing system had to be reviewed and it was found that as with many small companies there was a remarkable lack of formal control and written data. Relevant data with regards to the component and the manufacturing process had therefore to be collected and analysed. The foundry process was fixed but the secondary machining operations were analysed by a technique similar to Component Flow Analysis and as a result the machines were arranged in a series of flow lines. A system of manual production control was proposed and for comparison, a local computer bureau was approached and a system proposed incorporating the production of additional management information. These systems are compared and the relative merits discussed and a proposal made for implementation.

The value of proprietary health and safety software to proactive health and safety management

There has been little research in health and safety management concernmg the application of information technology to the field. This thesis attempts to stimulate interest in this area by analysing the value of proprietary health and safety software to proactive health and safety management. The thesis is based upon the detailed software evaluation of seven pieces of proprietary health and safety software. It features a discussion concerning the development of information technology and health and safety management, a review of the key issues identified during the software evaluations, an analysis of the commercial market for this type of software, and a consideration of the broader issues which surround the use of this software. It also includes practical guidance for the evaluation, selection, implementation and maintenance of all health and safety management software. This includes a comprehensive software evaluation chart. The implications of the research are considered for proprietary health and safety software, the application of information technology to health and safety management, and for future research.

What is the public value of government action? Towards a (new) pragmatic approach to values questions in public endeavours

There has been a resurgence of interest in values in recent public administration research, based on two distinct arguments. For different reasons, neither approach is likely to secure a robust normative basis for public endeavours. These reasons are assessed, using an alternative body of theory rooted in contemporary social theory that we term, 'new pragmatism'. New pragmatic ideas are deployed to critique the divorce of values from facts; the abstraction of values from concrete situations; the anthropocentric foundation to social choice; the poorly developed understanding of the process of governance, with its inherent pluralism; and the seeming reluctance to articulate principles of political discourse. © 2010 The Authors. Public Administration © 2010 Blackwell Publishing Ltd.