Dimensions of perception and recognition of danger

Despite abundant literature on human behaviour in the face of danger, much remains to be discovered. Some descriptive models of behaviour in the face of danger are reviewed in order to identify areas where documentation is lacking. It is argued that little is known about recognition and assessment of danger and yet, these are important aspects of cognitive processes. Speculative arguments about hazard assessment are reviewed and tested against the results of previous studies. Once hypotheses are formulated, the reason for retaining the reportory grid as the main research instrument are outlined, and the choice of data analysis techniques is described. Whilst all samples used repertory grids, the rating scales were different between samples; therefore, an analysis is performed of the way in which rating scales were used in the various samples and of some reasons why the scales were used differently. Then, individual grids are looked into and compared between respondents within each sample; consensus grids are also discussed. the major results from all samples are then contrasted and compared. It was hypothesized that hazard assessment would encompass three main dimensions, i.e. 'controllability', 'severity of consequences' and 'likelihood of occurrence', which would emerge in that order. the results suggest that these dimensions are but facets of two broader dimensions labelled 'scope of human intervention' and 'dangerousness'. It seems that these two dimensions encompass a number of more specific dimensions some of which can be further fragmented. Thus, hazard assessment appears to be a more complex process about which much remains to be discovered. Some of the ways in which further discovery might proceed are discussed.

Bending characteristics of fiber long-period gratings with cladding index modified by femtosecond laser

A femtosecond laser has been used to asymmetrically modify the cladding of fiber containing long-period gratings. Following modification, devices in single-mode fiber are shown to be capable of sensing the magnitude and direction of bending in one plane by producing blue and red wavelength shifts depending upon the orientation of the bend. The resulting curvature sensitivities were -1.62 and +3.82 nm&middotm. Devices have also been produced using an elliptical core fiber to study the effects of the cladding modification on the two polarization eigenstates. A cladding modification applied on the fast axis of the fiber is shown to affect the light in the fast axis much more significantly than the light in the orthogonal state; this behavior may ultimately lead to a sensor capable of detecting the direction of bending in two dimensions for applications in shape sensing.

Spatially structured cognitve models of semantic information:the implications for computerised databases

Existing theories of semantic cognition propose models of cognitive processing occurring in a conceptual space, where ‘meaning’ is derived from the spatial relationships between concepts’ mapped locations within the space. Information visualisation is a growing area of research within the field of information retrieval, and methods for presenting database contents visually in the form of spatial data management systems (SDMSs) are being developed. This thesis combined these two areas of research to investigate the benefits associated with employing spatial-semantic mapping (documents represented as objects in two- and three-dimensional virtual environments are proximally mapped dependent on the semantic similarity of their content) as a tool for improving retrieval performance and navigational efficiency when browsing for information within such systems. Positive effects associated with the quality of document mapping were observed; improved retrieval performance and browsing behaviour were witnessed when mapping was optimal. It was also shown using a third dimension for virtual environment (VE) presentation provides sufficient additional information regarding the semantic structure of the environment that performance is increased in comparison to using two-dimensions for mapping. A model that describes the relationship between retrieval performance and browsing behaviour was proposed on the basis of findings. Individual differences were not found to have any observable influence on retrieval performance or browsing behaviour when mapping quality was good. The findings from this work have implications for both cognitive modelling of semantic information, and for designing and testing information visualisation systems. These implications are discussed in the conclusions of this work.

The role of interoganisational tension and conflict in market creation practice

Markets exist within a world of constant exchanges which form the basis for changes and the creation of new markets. Therefore, it is important to research these exchanges. One of the areas in which market creation can be observed is interorganisational collaborations, as firms increasingly collaborate to create markets. In market creation practice, however, interorganisational tension and conflict can form from divergent approaches and vested interests of the partners. Interorganisational tension represents the opposing intentions of interorganisational forces, and conflict is generated through disagreements. The aim of this research is to investigate interorganisational tension and conflict on market creation practice. Specifically, it attempts to: (i) expand interorganisational tension and conflict and provide insights to these concepts, as well as establishing a two-dimensional interorganisational tension (productive and unproductive) understanding, (ii) explore the interactions between interorganisational tension and conflict, (iii) develop a conceptual framework that explains the level of market creation depending on the effects of interorganisational tension and conflict, (iv) develop a typology of partnering firms based on interorganisational tension and conflict practice. To achieve this aim, and to respond to the research calls, this study follows a grounded theory approach which intends to expand the understanding of interorganisational tension and conflict. According to the findings, a major characteristic of interorganisational tension is its two dimensions: productive and unproductive. However, it is the intertwined nature of tension and conflict that influences market creation. Fundamental to these are the six interorganisational tension and three conflict types revealed by the findings of this study. The core theoretical contributions of the study are a dynamic framework that portrays the dynamic interactions between interorganisational tension and conflict on market creation practice, and a typology of market-creating partnering firms. Collectively, they explicate the development of market creation practice, and firms’ reactions to interorganisational tension and conflict.

Small business owners’ success criteria, a values approach to personal differences

This study of 150 Dutch small business owners, identified through business/ network directories, investigated relationships between owners’ understanding of success and their personal values. Business owners ranked 10 success criteria. Per- sonal satisfaction, profitability, and satisfied stakeholders ranked highest. Multidi- mensional scaling techniques revealed two dimensions underlying the rank order of success criteria: person-oriented (personal satisfaction versus business growth) and business-oriented (profitability versus contributing back to society). Furthermore, business growth, profitability, and innovativeness were guided by self-enhancing value orientations (power and achievement). Softer success criteria, such as having satisfied stakeholders and a good work–life balance, were guided by self-transcendent value orientations (benevolence and universalism).

Bending characteristics of fiber long-period gratings with cladding index modified by femtosecond laser

A femtosecond laser has been used to asymmetrically modify the cladding of fiber containing long-period gratings. Following modification, devices in single-mode fiber are shown to be capable of sensing the magnitude and direction of bending in one plane by producing blue and red wavelength shifts depending upon the orientation of the bend. The resulting curvature sensitivities were -1.62 and +3.82 nm·m. Devices have also been produced using an elliptical core fiber to study the effects of the cladding modification on the two polarization eigenstates. A cladding modification applied on the fast axis of the fiber is shown to affect the light in the fast axis much more significantly than the light in the orthogonal state; this behavior may ultimately lead to a sensor capable of detecting the direction of bending in two dimensions for applications in shape sensing. © 2006 IEEE.

Combining an enterprise resource planning system and informality:a study of efficiency and flexibility complmentarity [sic]

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT One of the current research trends in Enterprise Resource Planning (ERP) involves examining the critical factors for its successful implementation. However, such research is limited to system implementation, not focusing on the flexibility of ERP to respond to changes in business. Therefore, this study explores a combination system, made up of an ERP and informality, intended to provide organisations with efficient and flexible performance simultaneously. In addition, this research analyses the benefits and challenges of using the system. The research was based on socio-technical system (STS) theory which contains two dimensions: 1) a technical dimension which evaluates the performance of the system; and 2) a social dimension which examines the impact of the system on an organisation. A mixed method approach has been followed in this research. The qualitative part aims to understand the constraints of using a single ERP system, and to define a new system corresponding to these problems. To achieve this goal, four Chinese companies operating in different industries were studied, all of which faced challenges in using an ERP system due to complexity and uncertainty in their business environments. The quantitative part contains a discrete-event simulation study that is intended to examine the impact of operational performance when a company implements the hybrid system in a real-life situation. Moreover, this research conducts a further qualitative case study, the better to understand the influence of the system in an organisation. The empirical aspect of the study reveals that an ERP with pre-determined business activities cannot react promptly to unanticipated changes in a business. Incorporating informality into an ERP can react to different situations by using different procedures that are based on the practical knowledge of frontline employees. Furthermore, the simulation study shows that the combination system can achieve a balance between efficiency and flexibility. Unlike existing research, which emphasises a continuous improvement in the IT functions of an enterprise system, this research contributes to providing a definition of a new system in theory, which has mixed performance and contains both the formal practices embedded in an ERP and informal activities based on human knowledge. It supports both cost-efficiency in executing business transactions and flexibility in coping with business uncertainty.This research also indicates risks of using the system, such as using an ERP with limited functions; a high cost for performing informally; and a low system acceptance, owing to a shift in organisational culture. With respect to practical contribution, this research suggests that companies can choose the most suitable enterprise system approach in accordance with their operational strategies. The combination system can be implemented in a company that needs to operate a medium amount of volume and variety. By contrast, the traditional ERP system is better suited in a company that operates a high-level volume market, while an informal system is more suitable for a firm with a requirement for a high level of variety.

Coverage versus supply cost in facility location:physics of frustrated spin systems

A comprehensive coverage is crucial for communication, supply, and transportation networks, yet it is limited by the requirement of extensive infrastructure and heavy energy consumption. Here, we draw an analogy between spins in antiferromagnet and outlets in supply networks, and apply techniques from the studies of disordered systems to elucidate the effects of balancing the coverage and supply costs on the network behavior. A readily applicable, coverage optimization algorithm is derived. Simulation results show that magnetized and antiferromagnetic domains emerge and coexist to balance the need for coverage and energy saving. The scaling of parameters with system size agrees with the continuum approximation in two dimensions and the tree approximation in random graphs. Due to frustration caused by the competition between coverage and supply cost, a transition between easy and hard computation regimes is observed. We further suggest a local expansion approach to greatly simplify the message updates which shed light on simplifications in other problems. © 2014 American Physical Society.

The two limits debates: "Limits to Growth" and climate change

In this article we compare the current debate about global warming with the earlier discourse of Limits to Growth (LtG) of the 1970's. We are especially interested in the similarities of and differences between the two cases and therefore compare the policy challenges and lessons to be drawn. While the two debates differ on important issues, they share a technocratic orientation to public policy, and susceptibility to similar pitfalls. In both debates alarming scenarios about future catastrophes play an important role. We suggest that climate change policy discourse needs to focus more closely on the social, economic, and political dimensions of climate change, as opposed to its excessive emphasis on emission reduction targets. We also argue that an excessive faith in the market mechanisms to supply global warming mitigation technologies is problematic. In this respect, we provide a reality check regarding the political implications of emission targets and timetables and suggest how policy issues can be moved forward.

Paradoxical psychometric functions ("swan functions") are explained by dilution masking in four stimulus dimensions

The visual system dissects the retinal image into millions of local analyses along numerous visual dimensions. However, our perceptions of the world are not fragmentary, so further processes must be involved in stitching it all back together. Simply summing up the responses would not work because this would convey an increase in image contrast with an increase in the number of mechanisms stimulated. Here, we consider a generic model of signal combination and counter-suppression designed to address this problem. The model is derived and tested for simple stimulus pairings (e.g. A + B), but is readily extended over multiple analysers. The model can account for nonlinear contrast transduction, dilution masking, and signal combination at threshold and above. It also predicts nonmonotonic psychometric functions where sensitivity to signal A in the presence of pedestal B first declines with increasing signal strength (paradoxically dropping below 50% correct in two-interval forced choice), but then rises back up again, producing a contour that follows the wings and neck of a swan. We looked for and found these "swan" functions in four different stimulus dimensions (ocularity, space, orientation, and time), providing some support for our proposal.

True chemical shift correlation maps:a TOCSY experiment with pure shifts in both dimensions

Signal resolution in H NMR is limited primarily by multiplet structure. Recent advances in pure shift NMR, in which the effects of homonuclear couplings are suppressed, have allowed this limitation to be circumvented in 1D NMR, gaining almost an order of magnitude in spectral resolution. Here for the first time an experiment is demonstrated that suppresses multiplet structure in both domains of a homonuclear two-dimensional spectrum. The principle is demonstrated for the TOCSY experiment, generating a chemical shift correlation map in which a single peak is seen for each coupled relationship, but the principle is general and readily extensible to other homonuclear correlation experiments. Such spectra greatly simplify manual spectral analysis and should be well-suited to automated methods for structure elucidation. © 2010 American Chemical Society.

A comparison of two distributed large-volume measurement systems:the mobile spatial co-ordinate measuring system and the indoor global positioning system

Advances in the area of industrial metrology have generated new technologies that are capable of measuring components with complex geometry and large dimensions. However, no standard or best-practice guides are available for the majority of such systems. Therefore, these new systems require appropriate testing and verification in order for the users to understand their full potential prior to their deployment in a real manufacturing environment. This is a crucial stage, especially when more than one system can be used for a specific measurement task. In this paper, two relatively new large-volume measurement systems, the mobile spatial co-ordinate measuring system (MScMS) and the indoor global positioning system (iGPS), are reviewed. These two systems utilize different technologies: the MScMS is based on ultrasound and radiofrequency signal transmission and the iGPS uses laser technology. Both systems have components with small dimensions that are distributed around the measuring area to form a network of sensors allowing rapid dimensional measurements to be performed in relation to large-size objects, with typical dimensions of several decametres. The portability, reconfigurability, and ease of installation make these systems attractive for many industries that manufacture large-scale products. In this paper, the major technical aspects of the two systems are briefly described and compared. Initial results of the tests performed to establish the repeatability and reproducibility of these systems are also presented. © IMechE 2009.

Performance analysis of polymer optical fibre based Fabry-Perot sensor formed by two uniform Bragg gratings

The stress sensitivity of polymer optical fibre (POF) based Fabry-Perot sensors formed by two uniform Bragg gratings with finite dimensions is investigated. POF has received high interest in recent years due to its different material properties compared to its silica counterpart. Biocompatibility, a higher failure strain and the highly elastic nature of POF are some of the main advantages. The much lower Young’s modulus of polymer materials compared to silica offers enhanced stress sensitivity to POF based sensors which renders them great candidates for acoustic wave receivers and any kind of force detection. The main drawback in POF technology is perhaps the high fibre loss. In a lossless fibre the sensitivity of an interferometer is proportional to its cavity length. However, the presence of the attenuation along the optical path can significantly reduce the finesse of the Fabry-Perot interferometer and it can negatively affect its sensitivity at some point. The reflectivity of the two gratings used to form the interferometer can be also reduced as the fibre loss increases. In this work, a numerical model is developed to study the performance of POF based Fabry-Perot sensors formed by two uniform Bragg gratings with finite dimensions. Various optical and physical properties are considered such as grating physical length, grating effective length which indicates the point where the light is effectively reflected, refractive index modulation of the grating, cavity length of the interferometer, attenuation and operating wavelength. Using this model, we are able to identify the regimes in which the PMMA based sensor offer enhanced stress sensitivity compared to silica based one.