Block GTM: Incorporating prior knowledge of covariance structure in data visualisation

Visualising data for exploratory analysis is a big challenge in scientific and engineering domains where there is a need to gain insight into the structure and distribution of the data. Typically, visualisation methods like principal component analysis and multi-dimensional scaling are used, but it is difficult to incorporate prior knowledge about structure of the data into the analysis. In this technical report we discuss a complementary approach based on an extension of a well known non-linear probabilistic model, the Generative Topographic Mapping. We show that by including prior information of the covariance structure into the model, we are able to improve both the data visualisation and the model fit.

TRial of an Educational intervention on patients' knowledge of Atrial fibrillation and anticoagulant therapy, INR control, and outcome of Treatment with warfarin (TREAT)

Background Atrial fibrillation (AF) patients with a high risk of stroke are recommended anticoagulation with warfarin. However, the benefit of warfarin is dependent upon time spent within the target therapeutic range (TTR) of their international normalised ratio (INR) (2.0 to 3.0). AF patients possess limited knowledge of their disease and warfarin treatment and this can impact on INR control. Education can improve patients' understanding of warfarin therapy and factors which affect INR control. Methods/Design Randomised controlled trial of an intensive educational intervention will consist of group sessions (between 2-8 patients) containing standardised information about the risks and benefits associated with OAC therapy, lifestyle interactions and the importance of monitoring and control of their International Normalised Ratio (INR). Information will be presented within an 'expert-patient' focussed DVD, revised educational booklet and patient worksheets. 200 warfarin-naïve patients who are eligible for warfarin will be randomised to either the intervention or usual care groups. All patients must have ECG-documented AF and be eligible for warfarin (according to the NICE AF guidelines). Exclusion criteria include: aged < 18 years old, contraindication(s) to warfarin, history of warfarin USE, valvular heart disease, cognitive impairment, are unable to speak/read English and disease likely to cause death within 12 months. Primary endpoint is time spent in TTR. Secondary endpoints include measures of quality of life (AF-QoL-18), anxiety and depression (HADS), knowledge of AF and anticoagulation, beliefs about medication (BMQ) and illness representations (IPQ-R). Clinical outcomes, including bleeding, stroke and interruption to anticoagulation will be recorded. All outcome measures will be assessed at baseline and 1, 2, 6 and 12 months post-intervention. Discussion More data is needed on the clinical benefit of educational intervention with AF patients receiving warfarin. Trial registration ISRCTN93952605

Transferring knowledge of manufacturing techniques within a subsidiary of a multi-national corporation

With the growth of the multi-national corporation (MNCs) has come the need to understand how parent companies transfer knowledge to, and manage the operations of, their subsidiaries. This is of particular interest to manufacturing companies transferring their operations overseas. Japanese companies in particular have been pioneering in the development of techniques such as Kaizen, and elements of the Toyota Production System (TPS) such as Kanban, which can be useful tools for transferring the ethos of Japanese manufacturing and maintaining quality and control in overseas subsidiaries. Much has been written about the process of transferring Japanese manufacturing techniques but much less is understood about how the subsidiaries themselves – which are required to make use of such techniques – actually acquire and incorporate them into their operations. This research therefore takes the perspective of the subsidiary in examining how knowledge of manufacturing techniques is transferred from the parent company within its surrounding (subsidiary). There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate this knowledge into their working practices. A particularly relevant theme is how subsidiaries both replicate and adapt knowledge from parents and the circumstances in which replication or adaptation occurs. However, it is shown that there is a lack of research which takes an in-depth look at these processes from the perspective of the participants themselves. This is particularly important as much knowledge literature argues that knowledge is best viewed as enacted and learned in practice – and therefore transferred in person – rather than by the transfer of abstract and de-contextualised information. What is needed, therefore, is further research which makes an in-depth examination of what happens at the subsidiary level for this transfer process to occur. There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate knowledge about manufacturing techniques into their working practices. In depth qualitative research was, therefore, conducted in the subsidiary of a Japanese multinational, Gambatte Corporation, involving three main manufacturing initiatives (or philosophies), namely 'TPS‘, 'TPM‘ and 'TS‘. The case data were derived from 52 in-depth interviews with project members, moderate-participant observations, and documentations and presented and analysed in episodes format. This study contributes to our understanding of knowledge transfer in relation to the approaches and circumstances of adaptation and replication of knowledge within the subsidiary, how the whole process is developed, and also how 'innovation‘ takes place. This study further understood that the process of knowledge transfer could be explained as a process of Reciprocal Provider-Learner Exchange that can be linked to the Experiential Learning Theory.

Differential effects of value consciousness and coupon proneness on consumers’ persuasion knowledge of pricing tactics

Pricing tactics persuasion knowledge (PTPK) is a relatively new concept that seeks to extend the research on persuasion knowledge to the pricing domain. Pricing tactics persuasion knowledge refers to the persuasion knowledge of consumers about marketers’ pricing tactics. Employing an acquisition–transaction utility theoretic perspective, this study examines the differential effects of value consciousness and coupon proneness on the accuracy, confidence, and calibration of consumers’ pricing tactics persuasion knowledge. The study finds that coupon proneness is negatively related to accuracy, confidence, and calibration of PTPK, while value consciousness is positively related to accuracy, confidence, and calibration of PTPK. The implications of the study are outlined.

Calibration of consumer knowledge of the web

Calibration of consumer knowledge of the web refers to the correspondence between accuracy and confidence in knowledge of the web. Being well-calibrated means that a person is realistic in his or her assessment of the level of knowledge that he or she possesses. This study finds that involvement leads to better calibration and that calibration is higher for procedural knowledge and common knowledge, as compared to declarative knowledge and specialized knowledge. Neither usage, nor experience, has any effect on calibration of knowledge of the web. No difference in calibration is observed between genders. But, in agreement with previous findings, this study also finds that males are more confident in their knowledge of the web. The results point out that calibration could be more a function of knowledge-specific factors and less that of individual-specific factors. The study also identifies flow and frustration with the web as consequences of calibration of knowledge of the web and draws the attention of future researchers to examine these aspects.

Transferring knowledge of manufacturing techniques in multinational corporations:preliminary findings

With the growth of the multinational corporation (MNC) has come the need to understand how parent companies transfer knowledge to, and manage the operations of, their subsidiaries. This is of particular interest to manufacturing companies transferring their operations overseas. Japanese companies in particular have been pioneering in this regard, with techniques such as the Toyota Production System (TPS) for transferring the ethos of Japanese manufacturing and maintaining quality and control in overseas subsidiaries. A great deal has been written about the process of transferring Japanese manufacturing techniques, but much less is understood about how the subsidiaries themselves, which are required to make use of such techniques, actually acquire and incorporate them into their operations. The research on which this paper is based therefore examines how, from the perspective of the subsidiary, knowledge of manufacturing techniques is transferred from the parent company. There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate knowledge about manufacturing techniques into their working practices. In-depth qualitative research was, therefore, conducted in the subsidiary of a Japanese multinational, Denso Corporation, involving three main manufacturing initiatives (or philosophies), namely ‘TPS’, ‘TPM’ and ‘TS’. The case data were derived from 52 in-depth interviews with project members, moderate participant observations, and documentations. The aim of this paper is to present the preliminary findings from the case analyses. The research contributes to our understanding of knowledge transfer in relation to the circumstances of the selection between adaptation and replication of knowledge in the subsidiary from its parent. In particular this understanding relates to transfer across different flows and levels in the organisational hierarchy, how the whole process is managed, and also how modification takes place.

An investigation into the effects of the feedback of knowledge of results on operator performance

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY SERVICES WITH PRIOR ARRANGEMENT

Educating the iPod generation:undergraduate attitudes, experiences and knowledge of vodcast and podcast use

There is an increasing pressure on university staff to provide ever more information and resources to students. This study investigated student opinions on (audio) podcasts and (video) vodcasts and how well they met requirements and aided learning processes. Two experiments within the Aston University looked at student opinion on, and usage of, podcasts and vodcasts for a selection of their psychology lectures. Recordings were produced first using a hand-held camcorder, and then using the in-house media department. WebCT was used to distribute the podcasts and vodcasts, attitude questionnaires were then circulated at two time points. Overall students indicated that podcasts and vodcasts were a beneficial addition resource for learning, particularly when used in conjunction with lecturers’ slides and as a tool for revision/assessment. The online material translated into students having increased understanding of the material, which supplemented and enhanced their learning without being a substitute for traditional lectures. There is scope for the provision of portable media files to become standard practice within higher education; integrating distance and online learning with traditional approaches to improve teaching and learning.

Workers' understanding of chemical risks: electroplating case study

BACKGROUND: There is limited research concerning how small companies in particular, respond to health and safety messages. AIMS: To understand individuals' knowledge and beliefs about chemical risks and to compare these with those of experts. METHODS: The use of chromic acid in particular, and also other chemicals associated with chrome plating were studied. All chromium plating firms were based in the West Midlands. The methodology involved initial face to face interviews (n = 21) with chromium platers, structured questionnaires (n = 84) to test the prevalence of beliefs identified in the interviews, an expert questionnaire, and a workshop to discuss findings. The responses of platers were compared with those of occupational health and safety experts. RESULTS: Although chromium platers appeared to understand the short term adverse effects of the chemicals to which they are exposed, their understanding of long term, or chronic effects appeared to be incomplete. They had good knowledge of acute effects based primarily on experience. Platers were aware of the hazardous nature of the chemicals with which they work, but did not draw distinction between the terms "hazards" and "risks". They had difficulties articulating the effects of the chemicals and how exposure might occur; although it is inappropriate to equate this with lack of knowledge. A significant minority of platers displayed deficiencies in understanding key technical terms used in Safety Data Sheets. CONCLUSIONS: This study provides a method which can be used to gain some understanding of workers' knowledge and beliefs about risks that they are exposed to in the workplace. The study also identifies gaps between the platers' knowledge and beliefs and those of experts. New risk information needs to be designed which addresses the information needs of platers using language that they understand.

The PCF and the question of intellectual workers : the crisis of social ideology

The aim of this thesis is to examine the approach of the Parti Communiste Francais (from 1956 to 1982) to the emergence of new strata of salaried `intellectual workers' (technicians, engineers, low to middle managers in industry and commerce, scientific researchers, teachers etc) parallelled by the gradual diminution of the traditional industrial working class which forms the core of the Party's support base. This examination is carried out in the context of the debate in France (initiated in the 1950s by social theorists of the Left) on the class membership and role of these strata. The reason for the emergence of such a debate is that in a society given to both a rapid evolution of its social structure and an increased polarisation between Left and Right, a precise knowledge of the objective and subjective determinations of new strata would enable parties to the Left to make proper distinctions between potential allies and adversaries. The thesis posits the view that the PCF has failed to make correct distinctions between its potential allies and adversaries and has thus pursued unsuccessful alliance strategies. The thesis contributes towards a scientifically-based understanding of one of the reasons governing the PCF's steady decline since the 1950s.

World knowledge in the process of translation

The paper illustrates the role of world knowledge in comprehending and translating texts. A short news item, which displays world knowledge fairly implicitly in condensed lexical forms, was translated by students from English into German. It is shown that their translation strategies changed from a first draft which was rather close to the surface structure of the source text to a final version which took situational aspects, texttypological conventions and the different background knowledge of the respective addressees into account. Decisions on how much world knowledge has to be made explicit in the target text, however, must be based on the relevance principle. Consequences for teaching and for the notions of semantic knowledge and world knowledge are discussed.

The future of manufacturing

Anyone who looks at the title of this special issue will agree that the intent behind the preparation of this volume was ambitious: to predict and discuss “The Future of Manufacturing”. Will manufacturing be important in the future? Even though some sceptics might say not, and put on the table some old familiar arguments, we would strongly disagree. To bring subsidies for the argument we issued the call-for-papers for this special issue of Journal of Manufacturing Technology Management, fully aware of the size of the challenge in our hands. But we strongly believed that the enterprise would be worthwhile. The point of departure is the ongoing debate concerning the meaning and content of manufacturing. The easily visualised internal activity of using tangible resources to make physical products in factories is no longer a viable way to characterise manufacturing. It is now a more loosely defined concept concerning the organisation and management of open, interdependent, systems for delivering goods and services, tangible and intangible, to diverse types of markets. Interestingly, Wickham Skinner is the most cited author in this special issue of JMTM. He provides the departure point of several articles because his vision and insights have guided and inspired researchers in production and operations management from the late 1960s until today. However, the picture that we draw after looking at the contributions in this special issue is intrinsically distinct, much more dynamic, and complex. Seven articles address the following research themes: 1.new patterns of organisation, where the boundaries of firms become blurred and the role of the firm in the production system as well as that of manufacturing within the firm become contingent; 2.new approaches to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface; 3.new challenges in strategic and operational decisions due to changes in the profile of the workforce; 4.new global players, especially China, modifying the manufacturing landscape; and 5.new techniques, methods and tools that are being made feasible through progress in new technological domains. Of course, many other important dimensions could be studied, but these themes are representative of current changes and future challenges. Three articles look at the first theme: organisational evolution of production and operations in firms and networks. Karlsson's and Skold's article represent one further step in their efforts to characterise “the extraprise”. In the article, they advance the construction of a new framework, based on “the network perspective” by defining the formal elements which compose it and exploring the meaning of different types of relationships. The way in which “actors, resources and activities” are conceptualised extends the existing boundaries of analytical thinking in operations management and open new avenues for research, teaching and practice. The higher level of abstraction, an intrinsic feature of the framework, is associated to the increasing degree of complexity that characterises decisions related to strategy and implementation in the manufacturing and operations area, a feature that is expected to become more and more pervasive as time proceeds. Riis, Johansen, Englyst and Sorensen have also based their article on their previous work, which in this case is on “the interactive firm”. They advance new propositions on strategic roles of manufacturing and discuss why the configuration of strategic manufacturing roles, at the level of the network, will become a key issue and how the indirect strategic roles of manufacturing will become increasingly important. Additionally, by considering that value chains will become value webs, they predict that shifts in strategic manufacturing roles will look like a sequence of moves similar to a game of chess. Then, lastly under the first theme, Fleury and Fleury develop a conceptual framework for the study of production systems in general derived from field research in the telecommunications industry, here considered a prototype of the coming information society and knowledge economy. They propose a new typology of firms which, on certain dimensions, complements the propositions found in the other two articles. Their telecoms-based framework (TbF) comprises six types of companies characterised by distinct profiles of organisational competences, which interact according to specific patterns of relationships, thus creating distinct configurations of production networks. The second theme is addressed by Kyläheiko and SandstroÍm in their article “Strategic options based framework for management of dynamic capabilities in manufacturing firms”. They propose a new approach to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface. Their framework for a manufacturing firm in the digital age leads to active asset selection (strategic investments in both tangible and intangible assets) and efficient orchestrating of the global value net in “thin” intangible asset markets. The framework consists of five steps based on Porter's five-forces model, the resources-based view, complemented by means of the concepts of strategic options and related flexibility issues. Thun, GroÍssler and Miczka's contribution to the third theme brings the human dimension to the debate regarding the future of manufacturing. Their article focuses on the challenges brought to management by the ageing of workers in Germany but, in the arguments that are raised, the future challenges associated to workers and work organisation in every production system become visible and relevant. An interesting point in the approach adopted by the authors is that not only the factual problems and solutions are taken into account but the perception of the managers is brought into the picture. China cannot be absent in the discussion of the future of manufacturing. Therefore, within the fourth theme, Vaidya, Bennett and Liu provide the evidence of the gradual improvement of Chinese companies in the medium and high-tech sectors, by using the revealed comparative advantage (RCA) analysis. The Chinese evolution is shown to be based on capabilities developed through combining international technology transfer and indigenous learning. The main implication for the Western companies is the need to take account of the accelerated rhythm of capability development in China. For other developing countries China's case provides lessons of great importance. Finally, under the fifth theme, Kuehnle's article: “Post mass production paradigm (PMPP) trajectories” provides a futuristic scenario of what is already around us and might become prevalent in the future. It takes a very intensive look at a whole set of dimensions that are affecting manufacturing now, and will influence manufacturing in the future, ranging from the application of ICT to the need for social transparency. In summary, this special issue of JMTM presents a brief, but undisputable, demonstration of the possible richness of manufacturing in the future. Indeed, we could even say that manufacturing has no future if we only stick to the past perspectives. Embracing the new is not easy. The new configurations of production systems, the distributed and complementary roles to be performed by distinct types of companies in diversified networked structures, leveraged by the new emergent technologies and associated the new challenges for managing people, are all themes that are carriers of the future. The Guest Editors of this special issue on the future of manufacturing are strongly convinced that their undertaking has been worthwhile.