The role of the 8-18 helix of CGRP 8-37 in mediating high affinity binding to CGRP receptors; coulombic and steric interactions

1. The role of individual residues in the 8-18 helix of CGRP 8-37 in promoting high-affinity binding to CGRP 1 receptors expressed on rat L6 and human SK-N-MC cells has been examined. The relative potencies of various derivatives were estimated from their ability to inhibit the human αCGRP-mediated increase in cyclic AMP production and the binding of [ 125I]-human αCGRP. 3. Arg 11 and Arg 18 were replaced by serines to give [Ser 11.18]CGRP 8-37. These bound with pKi values <6 to SK-N-MC cells and had apparent pA 2 values of 5.81 ± 0.04 and 5.31 ± 0.11 on SK-N-MC and L6 cells. CGRP 8-37 had a pKi of 8.22 on SK-N-MC cells and pK b values on the above cell lines of 8.95±0.04 and 8.76±0.04. 3. The arginines were replaced with glutamic acid residues. [Glu 11]CGRP 8-37 had a pK b of 7.14±0.14 on SK-N-MC cells (pKi=7.05±0.05) and 6.99±0.08 on L6 cells. [Glu 18]CGRP 8-37 had a pK b of 7.10±0.0.08 on SK-N-MC cells (pKi=6.91±0.23) and 7.12±0.09 on L6 cells. 4. Leu 12, Leu 15 and Leu 16 were replaced by benzoyl-phenylalanine (bpa) residues. On SK-N-MC cells, the apparent pA 2 values of [bpa 12]-, [bpa 15]- and [bpa 16]CGRP 8-37 were respectively 7.43±0.23, 8.34±0.11 and 5.66±0.16 (pKi values of 7.14±0.17, 7.66±0.21 and <6): on L6 cells they were 7.96±0.36, 8.28±0.21 and 6.09±0.04 (all n=3). 5. It is concluded that the Arg 11 and Arg 18 are involved in specific electrostatic interactions with other residues, either on the CGRP 1 receptors or elsewhere on CGRP 8-37. Leu 16 is in a conformationally restricted site when CGRP 8-37 binds to CGRP 1 receptors, unlike Leu 12 and Leu 15.

Colour and luminance interactions in the visual perception of motion

We sought to determine the extent to which red–green, colour–opponent mechanisms in the human visual system play a role in the perception of drifting luminance–modulated targets. Contrast sensitivity for the directional discrimination of drifting luminance–modulated (yellow–black) test sinusoids was measured following adaptation to isoluminant red–green sinusoids drifting in either the same or opposite direction. When the test and adapt stimuli drifted in the same direction, large sensitivity losses were evident at all test temporal frequencies employed (1–16 Hz). The magnitude of the loss was independent of temporal frequency. When adapt and test stimuli drifted in opposing directions, large sensitivity losses were evident at lower temporal frequencies (1–4 Hz) and declined with increasing temporal frequency. Control studies showed that this temporal–frequency–dependent effect could not reflect the activity of achromatic units. Our results provide evidence that chromatic mechanisms contribute to the perception of luminance–modulated motion targets drifting at speeds of up to at least 32°s-1. We argue that such mechanisms most probably lie within a parvocellular–dominated cortical visual pathway, sensitive to both chromatic and luminance modulation, but only weakly selective for the direction of stimulus motion.

Workplace interactions and the polymorphic role of e-mail

Purpose - One of the principal organizational developments in the last decade has been the pervasive influence of computer mediated communication (CMC) tools. The purpose of this paper is to closely interrogate the day-to-day role of e-mail in explicating, influencing and shaping social and information interactions within an organization. Design/methodology/approach - A series of in-depth interviews (n = 29) were undertaken to elicit employee opinions on their e-mail adaptation, experiences and practices. Findings - The paper provides insights into the polymorphic role of e-mail, particularly the way in which it is adapted by individuals within the organization. Specifically, it shows how this tool interacts within day-to-day work activities and tasks. Research limitations/implications - This paper investigates only one CMC tool, e-mail, although it is envisaged that this initial work will be used to raise a new understanding of the socially skilled adaptation of other CMC tools by employees as well as leaders. Practical implications- Previously unreported insights into employee opinion are delineated in order to provide a focus from which organizations can train and develop their employees and leaders to maximise knowledge creation within the organization. Originality/value - This study assesses CMC from an under-researched "real-life" perspective in which everyday interactions are used to understand employee reactions to e-mail communication and hence foster an atmosphere in which these interactions assist organizational development.

Interactions between organic polymers and cement hydration products

Organic substances, particularly polymers, are finding increasing use in modifying the properties of cements and concrete. Although a significant amount of research has been conducted into the modification of the mechanical properties of cements by polymers, little is known about the nature of the interface and interactions taking place between the two phases. This thesis addresses the problem of elucidating such interactions. Relevant literature is reviewed, covering the general use of polymers with cements, the chemistry of cements and polymers, adhesion and known interactions between polymers and both cements and related minerals. Although several polymer systems were studied, two in particular were selected, as being well characterized. These were: - 1) polymethyl methacrylate (PMMA), the polymer derived from methyl methacrylate (MMA), and 2) an amine-cured epoxy resin system. By this approach, a methodology was developed for the examination of other polymer/cement interactions. Experiments were conducted in five main areas:- 1) polymer-cement adhesion and the feasibility of revealing interfacial regions mechanically, 2) chemical reactions between polymers and cements, 3) characterization of cement adhesion surfaces, 4) interactions affecting overall polymerisation rates, and 5) studies of polymer impregnated cements. The following conclusions were reached:- 1) The PMMA/cement interface contains calcium methacrylate as an interfacial reaction product, water being a reactant. Calcium methacrylate is detrimental to the properties of PMMA/cement composites, being highly water-soluble. 2) The pore surface of cement accelerates the polymerisation of MMA, leading to an increased molecular weight compared to polymerisation of pure MMA, minerals in hydrated cement powders having the opposite effect. 3) The investigation of reaction products presents a number of experimental problems, selection of appropriate techniques depending upon the system studied. For the two systems examined in detail, ion chromatography proved particularly useful; DTA, IRS and XPS indicated reactions, though the data was hard to interpret; XRD proving inconclusive. 4) It is impractical to reveal interfacial regions mechanically, but may be accomplished by chemical means.

Interactions between landcover pattern and geospatial processing methods:effects on landscape metrics and classification accuracy

Remote sensing data is routinely used in ecology to investigate the relationship between landscape pattern as characterised by land use and land cover maps, and ecological processes. Multiple factors related to the representation of geographic phenomenon have been shown to affect characterisation of landscape pattern resulting in spatial uncertainty. This study investigated the effect of the interaction between landscape spatial pattern and geospatial processing methods statistically; unlike most papers which consider the effect of each factor in isolation only. This is important since data used to calculate landscape metrics typically undergo a series of data abstraction processing tasks and are rarely performed in isolation. The geospatial processing methods tested were the aggregation method and the choice of pixel size used to aggregate data. These were compared to two components of landscape pattern, spatial heterogeneity and the proportion of landcover class area. The interactions and their effect on the final landcover map were described using landscape metrics to measure landscape pattern and classification accuracy (response variables). All landscape metrics and classification accuracy were shown to be affected by both landscape pattern and by processing methods. Large variability in the response of those variables and interactions between the explanatory variables were observed. However, even though interactions occurred, this only affected the magnitude of the difference in landscape metric values. Thus, provided that the same processing methods are used, landscapes should retain their ranking when their landscape metrics are compared. For example, highly fragmented landscapes will always have larger values for the landscape metric "number of patches" than less fragmented landscapes. But the magnitude of difference between the landscapes may change and therefore absolute values of landscape metrics may need to be interpreted with caution. The explanatory variables which had the largest effects were spatial heterogeneity and pixel size. These explanatory variables tended to result in large main effects and large interactions. The high variability in the response variables and the interaction of the explanatory variables indicate it would be difficult to make generalisations about the impact of processing on landscape pattern as only two processing methods were tested and it is likely that untested processing methods will potentially result in even greater spatial uncertainty. © 2013 Elsevier B.V.

Interdependent lateral interactions, hydrophobicity and acid strength and their influence on the catalytic activity of nanoporous sulfonic acid silicas

A series of propylsulfonic (MCM-SOH) and octyl co-functionalised propylsulfonic (MCM-Oc-SOH) catalysts have been prepared by post modification of MCM-41 with mercaptopropyltrimethoxysilane (MPTS) to achieve SOH surface coverages spanning the range 0.12-1 monolayer. Within the MCM-Oc-SOH series, samples with submonolayer MPTS coverages were further grafted with octyltrimethoxysilane to cap bare hydroxyl sites and tune the hydrophobicity of the support. For the MCM-SO H series NH calorimetry revealed acid strength increases as a function of sulfonic acid loading, with -ΔH(NH ) increasing from 87 to 118 kJ mol. In contrast, MCM-Oc-SOH exhibits a dramatic enhancement of acid strength for submonolayer SOH coverages, with -ΔH(NH ) found to increase to 103 kJ mol. In line with these acid strength measurements the per-site activity of the MCM-SOH series in the esterification of butanol with acetic acid was found to increase with SOH content. Incorporation of octyl groups further promotes esterification activity of all the samples within the MCM-Oc-SOH series, such that the turn over frequency of the sample with the lowest loading of SOH more than doubles. Molecular dynamic simulations indicate that the interaction of isolated sulfonic acid groups with the pore walls is the primary cause of the decrease in acid strength and activity of submonolayer samples within the MCM-SOH series. Incorporation of octyl groups results in a combination of increased hydrophobicity and lateral interactions between adjacent sulfonic acid head groups, resulting in a striking enhancement of acid strength and esterification activity. © 2010 The Royal Society of Chemistry.

International technology transfer and collaborative new product development:evidence and a case from the machine tool industry

In recent years, it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper, the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The paper outlines the links between the operational aspects of collaborations and their strategic objectives. It is based on empirical data collected from the machine tool industries in the UK and China. The evidence includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of BSA Tools Ltd and its Chinese partner the Changcheng Machine Tool Works is used to provide an in-depth example of the operational development of a successful collaboration. The paper concludes that a phased coordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work.

Suppression and summation in contrast gain control for human vision

Over the last ten years our understanding of early spatial vision has improved enormously. The long-standing model of probability summation amongst multiple independent mechanisms with static output nonlinearities responsible for masking is obsolete. It has been replaced by a much more complex network of additive, suppressive, and facilitatory interactions and nonlinearities across eyes, area, spatial frequency, and orientation that extend well beyond the classical recep-tive field (CRF). A review of a substantial body of psychophysical work performed by ourselves (20 papers), and others, leads us to the following tentative account of the processing path for signal contrast. The first suppression stage is monocular, isotropic, non-adaptable, accelerates with RMS contrast, most potent for low spatial and high temporal frequencies, and extends slightly beyond the CRF. Second and third stages of suppression are difficult to disentangle but are possibly pre- and post-binocular summation, and involve components that are scale invariant, isotropic, anisotropic, chromatic, achromatic, adaptable, interocular, substantially larger than the CRF, and saturated by contrast. The monocular excitatory pathways begin with half-wave rectification, followed by a preliminary stage of half-binocular summation, a square-law transducer, full binocular summation, pooling over phase, cross-mechanism facilitatory interactions, additive noise, linear summation over area, and a slightly uncertain decision-maker. The purpose of each of these interactions is far from clear, but the system benefits from area and binocular summation of weak contrast signals as well as area and ocularity invariances above threshold (a herd of zebras doesn't change its contrast when it increases in number or when you close one eye). One of many remaining challenges is to determine the stage or stages of spatial tuning in the excitatory pathway.