Measuring work group diversity of categorical variables

The article presents abstracts of papers for a conference on research methods including "On the Folly of Rewarding A While Hoping for B: A Critical Assessment of Theory Development," "All That Jazz: A Methodological Story of Stories," and "An Accounting of Counting: Universalism, Particularism, and the Counting of Qualitative Data."

A comparative assessment of performance and productivity of health centres in Seychelles

Purpose - The purpose of this paper is to measure the technical and scale efficiency of health centres; to evaluate changes in productivity; and to highlight possible policy implications of the results for policy makers. Design/methodology/approach - Data envelopment analysis (DEA) is employed to assess the technical and scale efficiency, and productivity change over a four-year period among 17 public health centres. Findings - During the period of study, the results suggest that the public health centres in Seychelles have exhibited mean overall or technical efficiency of above 93 per cent. It was also found that the overall productivity increased by 2.4 per cent over 2001-2004. Research limitations/implications - Further research can be undertaken to gather data on the prices of the various inputs to facilitate an estimation of the allocative efficiency of clinics. If such an exercise were to be undertaken, researchers may also consider collecting data on quantities and prices of paramedical, administrative and support staff to ensure that the analysis is more comprehensive than the study reported in this paper. Institutionalization of efficiency monitoring would help to enhance further the already good health sector stewardship and governance. Originality/value - This paper provides new empirical evidence on a four-year trend in the efficiency and productivity of health centres in Seychelles. © Emerald Group Publishing Limited.

Angel grants employees their wish – for time off in return for high performance:new breed of incentives based on what staff really want from their employer

Purpose – Describes a new breed of HR strategies that encourage employee involvement and commitment as part of high-performance working (HPW). Design/methodology/approach – Focuses on managing employee attitudes and skills through careful attention to leadership, reward and job-design policies. Highlights the differences between people's formal employment contracts and their less formal “psychological contracts”, and emphasizes the importance of the latter. Provides a case study of UK recruitment consultancy Angel Services Group Ltd, which allows staff who meet their daily targets to go home an hour early. Findings – Urges companies to have processes in place to understand the needs of individual employees. This can be done through leadership policies that require all supervisors and managers not only to manage their staff but also to know them as people. Practical implications – Emphasizes that organizations need to see HPW initiatives as part of the normal way of managing people, and not as “flavour of the month”. Originality/value – Outlines a wide range of initiatives that could help organizations to gain their employees' commitment.

A cost Malmquist productivity index capturing group performance

This paper develops an index for comparing the productivity of groups of operating units in cost terms when input prices are available. In that sense it represents an extension of a similar index available in the literature for comparing groups of units in terms of technical productivity in the absence of input prices. The index is decomposed to reveal the origins of differences in performance of the groups of units both in terms of technical and cost productivity. The index and its decomposition are of value in contexts where the need arises to compare units which perform the same function but they can be grouped by virtue of the fact that they operate in different contexts as might for example arise in comparisons of water or gas transmission companies operating in different countries.

The comparative impact of privatisation and regulation on productivity growth in the English and Welsh water and sewerage industry, 1985-99

After the 10 regional water authorities of England and Wales were privatized in November 1989, the successor WASCs (water and sewerage companies) faced a new regulatory regime that was designed to promote productivity growth while simultaneously improving drinking water and environmental quality. As legally mandated quality improvements necessitated a costly capital investment programme, the industry's economic regulator – the Office of Water Services – implemented a RPI + K pricing system, designed to compensate the WASCs for their capital investment programme while also encouraging faster rates of productivity growth. This paper considers the relative effects of privatization and regulation on productivity growth in the industry using both non-parametric and parametric methods to provide a crosscheck on the robustness of the results. While there is evidence that labour productivity improved after privatization, there is no evidence that privatization led to a growth in TFP (total factor productivity). However, there is some evidence of a small increase in the rate of TFP growth in the aftermath of a substantial tightening of the regulatory regime that took place in 1995. These results, therefore, are consistent with evidence from other research that privatization, in the absence of effective competition and/or regulation, is not necessarily associated with improved economic performance.

Industrial new product planning:a study of the sources of new product ideas and the development of new product proposals in the UK computer industry

This thesis presents a study of the sources of new product ideas and the development of new product proposals in an organisation in the UK Computer Industry. The thesis extends the work of von Hippel by showing how the phenomenon which he describes as "the Customer Active Paradigm for new product idea generation" can be observed to operate in this Industry. Furthermore, this thesis contrasts his Customer Active Paradigm with the more usually encountered Manufacturer Active Paradigm. In a second area, the thesis draws a number of conclusions relating to methods of market research, confirming existing observations and demonstrating the suitability of flexible interview strategies in certain circumstances. The thesis goes on to demonstrate the importance of free information flow within the organisation, making it more likely that sought and unsought opportunities can be exploited. It is shown that formal information flows and documents are a necessary but not sufficient means of influencing the formation of the organisation's dominant ideas on new product areas. The findings also link the work of Tushman and Katz on the role of "Gatekeepers" with the work of von Hippel by showing that the role of gatekeeper is particularly appropriate and useful to an organisation changing from Customer Active to Manufacturer Active methods of idea generation. Finally, the thesis provides conclusions relating to the exploitation of specific new product opportunities facing the sponsoring organisation.

Work-related stressors and psychological strain in the sales force:the role of intrinsic and extrinsic motivation

The contemporary workplace appears rife with psychological strain, which can have considerable deleterious outcomes to the firm and the individual. However, research on strain in the sales force is underdeveloped. This paper reports the results of a study of the antecedents and consequences of psychological strain in the sales force, with particular attention to the roles of role ambiguity, emotional exhaustion, and intrinsic and extrinsic motivation. Emotional exhaustion is found to increase strain. Intrinsic motivation reduces strain under conditions of relatively high role ambiguity, but leads to more strain under conditions of low role ambiguity. Strain is found to have a J-shaped relationship with turnover intentions, and is linearly related to lower job satisfaction and lower job performance.

The blurring boundaries between synchronicity and asynchronicity:new communicative situations in work-related Instant Messaging

Instant messaging is one of the most popular communication technologies in virtual teams, enabling interactions to intertwine whole working days, thus creating the sense of copresence for team members who are geographically dispersed. Through close linguistic analyses of naturally occurring data from a virtual team, this article discusses the implications of two novel communicative situations enabled by instant messaging: presence information and the persistence of transcript. The preliminary findings of this study indicate that these new communicative situations require the flouting or rethinking of previously existing interactional norms and that communicative practices employed by the team members are not yet conventionalized/normalized, the expectations and interpretations of interactional rituals and timing vary highly, even within the same virtual team.

Ownership identity, strategy and performance:business group affiliates versus independent firms in India

We consider whether the impact of entrepreneurial orientation on business performance is moderated by the company affiliation with business groups. Within business groups, we explore the trade-off between inter-firm insurance that enables risk-taking, and inefficient resource allocation. Risk-taking in group affiliated firms leads to higher performance, compared to independent firms, but the impact of proactivity is attenuated. Utilizing Indian data, we show that risk-taking may undermine rather than improve business performance, but this effect is not present in business groups. Proactivity enhances performance, but less so in business groups. Firms can also enhance performance by technological knowledge acquisition, but these effects are not significantly different for various ownership categories.

New technology adoption in developing countries:the role of buyer-supplier relationships

Developing countries depend on foreign providers to ensure successful adoption of new technology. This paper investigates the role of buyer-supplier relationships (BSR) in technology adoption using a survey of 147 Malaysian firms. In particular the authors examined the impact on performance of different patterns of buyer-supplier relationship. Results show that firms demonstrating closer relationships with their suppliers are more likely to achieve higher levels of performance than those that do not. There are also insights that are especially pertinent to an improved understanding of buyersupplier relationships in the procurement of capital equipment, about which the current research literature is limited.

The UK productivity gap in the service sector: do management practices matter?

Purpose – This paper aims to contribute to the debate on the drivers of the productivity gap that exists between the UK and its major international competitors. Design/methodology/approach – From the macro perspective the paper explores the quantitative evidence on the productivity differentials and how they are measured. From the micro perspective, the article explores the quantitative evidence on the role of management practices claimed to be a key determinant in promoting firm competitiveness and in bridging the UK gap. Findings – This study suggests that management practices are an ambiguous driver of firm productivity and higher firm performance. On the methodological side, qualitative and subjective measures of either management practices or firm performance are often used. This makes the results not comparable across studies, across firms or even within firms over time. Productivity and profitability are often and erroneously interchangeably used while productivity is only one element of firm performance. On the other hand, management practices are multi-dimensional constructs that generally do not demonstrate a straightforward relationship with productivity variables. To assume that they are the only driver of higher productivity may be misleading. Moreover, there is evidence of an inverse causal relationship between management practices and firm performance. This calls into question most empirical results of the extant literature based on the unidirectional assumption of direct causality between management practices and firm performance. Research limitations/implications – These and other issues suggest that more research is needed to deepen the understanding of the UK productivity gap and more quantitative evidence should be provided on the way in which management practices contribute to the UK competitiveness. Their impact is not easily measurable due to their complexity and their complementary nature and this is a fertile ground for further research. Originality/value – This paper brings together the evidence on the UK productivity gap and its main drivers, provided by the economics, management and performance measurement literature. This issue scores very highly in the agenda of policy makers and academics and has important implications for practitioners interested in evaluating the impact of managerial best practices.

Determining the contribution of technical change, efficiency change and scale change to productivity growth in the privatized English and Welsh water and sewerage industry:1985-2000

The water and sewerage industry of England and Wales was privatized in 1989 and subjected to a new regime of environmental, water quality and RPI+K price cap regulation. This paper estimates a quality-adjusted input distance function, with stochastic frontier techniques in order to estimate productivity growth rates for the period 1985-2000. Productivity is decomposed so as to account for the impact of technical change, efficiency change, and scale change. Compared with earlier studies by Saal and Parker [(2000) Managerial Decision Econ 21(6):253-268, (2001) J Regul Econ 20(1): 61-90], these estimates allow a more careful consideration of how and whether privatization and the new regulatory regime affected productivity growth in the industry. Strikingly, they suggest that while technical change improved after privatization, productivity growth did not improve, and this was attributable to efficiency losses as firms appear to have struggled to keep up with technical advances after privatization. Moreover, the results also suggest that the excessive scale of the WaSCs contributed negatively to productivity growth. © 2007 Springer Science+Business Media, LLC.

Measurement of work group diversity

Whilst research on work group diversity has proliferated in recent years, relatively little attention has been paid to the precise definition of diversity or its measurement. One of the few studies to do so is Harrison and Klein’s (2007) typology, which defined three types of diversity – separation, variety and disparity – and suggested possible indices with which they should be measured. However, their typology is limited by its association of diversity types with variable measurement, by a lack of clarity over the meaning of variety, and by the absence of a clear guidance about which diversity index should be employed. In this thesis I develop an extended version of the typology, including four diversity types (separation, range, spread and disparity), and propose specific indices to be used for each type of diversity with each variable type (ratio, interval, ordinal and nominal). Indices are chosen or derived from first principles based on the precise definition of the diversity type. I then test the usefulness of these indices in predicting outcomes of diversity compared with other indices, using both an extensive simulated data set (to estimate the effects of mis-specification of diversity type or index) and eight real data sets (to examine whether the proposed indices produce the strongest relationships with hypothesised outcomes). The analyses lead to the conclusion that the indices proposed in the typology are at least as good as, and usually better than, other indices in terms of both measuring effect sizes and power to find significant results, and thus provide evidence to support the typology. Implications for theory and methodology are discussed.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.