Microparticle surface layering through dry coating:impact of moisture content and process parameters on the properties of orally disintegrating tablets

OBJECTIVES: The aim of this study was to investigate the influence of process parameters during dry coating on particle and dosage form properties upon varying the surface adsorbed moisture of microcrystalline cellulose (MCC), a model filler/binder for orally disintegrating tablets (ODTs). METHODS: The moisture content of MCC was optimised using the spray water method and analysed using thermogravimetric analysis. Microproperty/macroproperty assessment was investigated using atomic force microscopy, nano-indentation, scanning electron microscopy, tablet hardness and disintegration testing. KEY FINDINGS: The results showed that MCC demonstrated its best flowability at a moisture content of 11.2% w/w when compared to control, comprising of 3.9% w/w moisture. The use of the composite powder coating process (without air) resulted in up to 80% increase in tablet hardness, when compared to the control. The study also demonstrated that surface adsorbed moisture can be displaced upon addition of excipients during dry processing circumventing the need for particle drying before tabletting. CONCLUSIONS: It was concluded that MCC with a moisture content of 11% w/w provides a good balance between powder flowability and favourable ODT characteristics.

Simulation process templates for e-business modelling

This paper argues the use of reusable simulation templates as a tool that can help to predict the effect of e-business introduction on business processes. First, a set of requirements for e-business modelling is introduced and modelling options described. Traditional business process mapping techniques are examined as a way of identifying potential changes. Whilst paper-based process mapping may not highlight significant differences between traditional and e-business processes, simulation does allow the real effects of e-business to be identified. Simulation has the advantage of capturing the dynamic characteristics of the process, thus reflecting more accurately the changes in behaviour. This paper shows the value of using generic process maps as a starting point for collecting the data that is needed to build the simulation and proposes the use of reusable templates/components for the speedier building of e-business simulation models.

Process improvement within a HR division at a UK police force

A structured approach to process improvement is described in the context of the human resources division of a UK police force. The approach combines a number of established techniques of process improvement such as the balanced scorecard and process mapping with a scoring system developed to prioritise processes for improvement. The methodology described presents one way of ensuring the correct processes are identified and redesigned at an operational level in such a way as to support the organisation's strategic aims. In addition, a performance measurement system is utilised to attempt to ensure that the changes implemented do actually achieve the desired effect over time. The case demonstrates the need to choose and in some cases develop in-house tools and techniques dependent on the context of the process improvement effort.

Raman amplification and performance altering effects

This thesis presents an experimental investigation into several applications of the Raman scattering effect in communication optical fibres as well as how some of these applications can be modified to enhance the resulting performance. The majority of the work contained within is based on laboratory results using many commercially available components. The results can be divided into and presented in three main parts: Firstly, a novel application of a known effect is used to broaden Raman pump light in order to achieve a more continuous distribution of gain with respect to wavelength. Multiple experimental results are presented, all based around the prior spreading of the pump spectrum before being used in the desired transmission fibre. Gathered results show that a notable improvement can be obtained from applying such a technique along with the scope for further optimisation work. Secondly, an investigation into the interaction between the well known effect of Four Wave Mixing (FWM) and Raman scattering is provided. The work provides an introduction to the effect as well commenting on previous literature regarding the effect and its mitigation. In response to existing research experimental results are provided detailing some limitations of proposed schemes along with concepts of how further alleviation from the deleterious effects maybe obtained. Lastly, the distributed nature of the Raman gain process is explored. A novel technique on how a near constant distribution of gain can be employed is implemented practically. The application of distributed gain is then applied to the generation of optical pulses with special mathematical properties within a laboratory setting and finally the effect of pump noise upon distributed gain techniques is acknowledged.

An investigation of thin amorphous carbon-based sputtered coatings for MEMS and micro-engineering applications

The work presented in this thesis describes an investigation into the production and properties of thin amorphous C films, with and without Cr doping, as a low wear / friction coating applicable to MEMS and other micro- and nano-engineering applications. Firstly, an assessment was made of the available testing techniques. Secondly, the optimised test methods were applied to a series of sputtered films of thickness 10 - 2000 nm in order to: (i) investigate the effect of thickness on the properties of coatingslcoating process (ii) investigate fundamental tribology at the nano-scale and (iii) provide a starting point for nanotribological coating optimisation at ultra low thickness. The use of XPS was investigated for the determination of Sp3/Sp2 carbon bonding. Under C 1s peak analysis, significant errors were identified and this was attributed to the absence of sufficient instrument resolution to guide the component peak structure (even with a high resolution instrument). A simple peak width analysis and correlation work with C KLL D value confirmed the errors. The use of XPS for Sp3/Sp2 was therefore limited to initial tentative estimations. Nanoindentation was shown to provide consistent hardness and reduced modulus results with depth (to < 7nm) when replicate data was suitably statistically processed. No significant pile-up or cracking of the films was identified under nanoindentation. Nanowear experimentation by multiple nanoscratching provided some useful information, however the conditions of test were very different to those expect for MEMS and micro- / nano-engineering systems. A novel 'sample oscillated nanoindentation' system was developed for testing nanowear under more relevant conditions. The films were produced in an industrial production coating line. In order to maximise the available information and to take account of uncontrolled process variation a statistical design of experiment procedure was used to investigate the effect of four key process control parameters. Cr doping was the most significant control parameter at all thicknesses tested and produced a softening effect and thus increased nanowear. Substrate bias voltage was also a significant parameter and produced hardening and a wear reducing effect at all thicknesses tested. The use of a Cr adhesion layer produced beneficial results at 150 nm thickness, but was ineffective at 50 nm. Argon flow to the coating chamber produced a complex effect. All effects reduced significantly with reducing film thickness. Classic fretting wear was produced at low amplitude under nanowear testing. Reciprocating sliding was produced at higher amplitude which generated three body abrasive wear and this was generally consistent with the Archard model. Specific wear rates were very low (typically 10-16 - 10-18 m3N-1m-1). Wear rates reduced exponentially with reduced film thickness and below (approx.) 20 nm, thickness was identified as the most important control of wear.

Flow patterns, performance and scale-up of distillation trays

This work is concerned with the nature of liquid flow across industrial sieve trays operating in the spray, mixed, and the emulsified flow regimes. In order to overcome the practical difficulties of removing many samples from a commercial tray, the mass transfer process was investigated in an air water simulator column by heat transfer analogy. The temperature of the warm water was measured by many thermocouples as the water flowed across the single pass 1.2 m diameter sieve tray. The thermocouples were linked to a mini computer for the storage of the data. The temperature data were then transferred to a main frame computer to generate temperature profiles - analogous to concentration profiles. A comprehensive study of the existing tray efficiency models was carried out using computerised numerical solutions. The calculated results were compared with experimental results published by the Fractionation Research Incorporation (FRl) and the existing models did not show any agreement with the experimental results. Only the Porter and Lockett model showed a reasonable agreement with the experimental results for cenain tray efficiency values. A rectangular active section tray was constructed and tested to establish the channelling effect and the result of its effect on circular tray designs. The developed flow patterns showed predominantly flat profiles and some indication of significant liquid flow through the central region of the tray. This comfirms that the rectangular tray configuration might not be a satisfactory solution for liquid maldistribution on sieve trays. For a typical industrial tray the flow of liquid as it crosses the tray from the inlet to the outlet weir could be affected by the mixing of liquid by the eddy, momentum and the weir shape in the axial or the transverse direction or both. Conventional U-shape profiles were developed when the operating conditions were such that the froth dispersion was in the mixed regime, with good liquid temperature distribution while in the spray regime. For the 12.5 mm hole diameter tray the constant temperature profiles were found to be in the axial direction while in the spray regime and in the transverse direction for the 4.5 mm hole tray. It was observed that the extent of the liquid stagnant zones at the sides of the tray depended on the tray hole diameter and was larger for the 4.5 mm hole tray. The liquid hold-up results show a high liquid hold-up at the areas of the tray with low liquid temperatures, this supports the doubts about the assumptions of constant point efficiency across an operating tray. Liquid flow over the outlet weir showed more liquid flow at the centre of the tray at high liquid loading with low liquid flow at both ends of the weir. The calculated results of the point and tray efficiency model showed a general increase in the calculated point and tray efficiencies with an increase in the weir loading, as the flow regime changed from the spray to the mixed regime the point and the tray efficiencies increased from approximately 30 to 80%.Through the mixed flow regime the efficiencies were found to remain fairly constant, and as the operating conditions were changed to maintain an emulsified flow regime there was a decrease in the resulting efficiencies. The results of the estimated coefficient of mixing for the small and large hole diameter trays show that the extent of liquid mixing on an operating tray generally increased with increasing capacity factor, but decreased with increasing weir loads. This demonstrates that above certain weir loads, the effect of eddy diffusion mechanism on the process of liquid mixing on an operating tray to be negligible.

Information management and the holistic, process-oriented enterprise

This research examines the role of the information management process within a process-oriented enterprise, Xerox Ltd. The research approach is based on a post-positive paradigm and has resulted in thirty-five idiographic statements. The three major outcomes are: 1. The process-oriented holistic enterprise is an organisation that requires a long-term management commitment to its development. It depends on the careful management of people, tasks, information and technology. A complex integration of business processes is required and this can be managed through the use of consistent documentation techniques, clarity in the definition of process responsibilities and management attention to the global metrics and the centralisation of the management of the process model are critical to its success. 2. The role of the information management process within the context of a process-oriented enterprise is to provide flexible and cost-effective applications, technological, and process support to the business. This is best achieved through a centralisation of the management of information management and of the process model. A business-led approach combined with the consolidation of applications, information, process, and data architectures is central to providing effective business and process-focused support. 3. In a process oriented holistic enterprise, process and information management are inextricably linked. The model of process management depends heavily on information management, whilst the model of information management is totally focused around supporting and creating the process model. The two models are mutually creating - one cannot exist without the other. There is a duality concept of process and information management.

Vision2020 and the English language : a study of the role of language in national development.

The research reported here is an investigation into the problems of social and economic development of a multiethic and multicultural country which has the added challenge of adopting a non-indigenous code to facilitate the development process. Malaysia's power to negotiate outcomes favourable to the interest of the country is critical for the successful attainment of the goals and objectives of VISION2020. Therefore the mechanisms of the human resource development programme have to be efficacious. The three hypotheses of this study are as follows: 1. there is a fear that the problems and challenges posed by the development plans, have been conceptually trivialised; 2. based on (1) above there is a concern that solutions proposed are inadequate and inappropriate and 3. the outcome of both (1) and (2) can lead to the potential underachievement of national goals and objectives. The study proposes a complex model for conceptualising the problem which looks at the relationship between society and language, which any solutions proposed must take into proper consideration. The study looks at the mechanisms available for the smooth absorption of new Malaysian members to new and international communities. A large scale investigation was undertaken with the researcher functioning as a participant observer. An in-depth study of one particular educational ecology yielded approximately 38 hours of interviews and 100 questionnaires. These data were analysed both for explicit information and implicit implications. By some criteria national policies appear to be having the desired effect, and can be given a clean bill of health. By others it is clear that major adjustments would be necessary if the nation is to achieve its objectives in full. Based on the evidence gathered, thr study proposes an apprenticeship approach to training programmes for effective participation of new members in the new ecologies.

Developing and evaluating a methodology for business process improvement

Purpose – There appears to be an ever-insatiable demand from markets for organisations to improve their products and services. To meet this, there is a need to provide business process improvement (BPI) methodologies that are holistic, structured and procedural. Therefore, this paper describes research that has formed and tested a generic and practical methodology termed model-based and integrated process improvement (MIPI) to support the implementation of BPI; and to validate its effectiveness in organisations. This methodology has been created as an aid for practitioners within organisations. Design/methodology/approach – The research objectives were achieved by: reviewing and analysing current methodologies, and selecting a few frameworks against key performance indicators. Using a refined Delphi approach and semi-structured interview with the “experts” in the field. Intervention, case study and process research approach to evaluating a methodology. Findings – The BPI methodology was successfully formed and applied by the researcher and directly by the companies involved against the criteria of feasibility, usability and usefulness. Research limitations/implications – The paper has demonstrated a new knowledge on how to systematically assess a BPI methodology in practice. Practical implications – Model-based and integrated process improvement methodology (MIPI) methodology offers the practitioner (experienced and novice) a set of step-by-step aids necessary to make informed, consistent and efficient changes to business processes. Originality/value – The novelty of this research work is the creation of a holistic workbook-based methodology with relevant tools and techniques. It extends the capabilities of existing methodologies.

A framework for assessing business-incubation input, process and output performance:proceedings of the RENT XXVII Conference, 20-22 November 2013, Vilnius, Lithuania

With business incubators deemed as a potent infrastructural element for entrepreneurship development, business incubation management practice and performance have received widespread attention. However, despite this surge of interest, scholars have questioned the extent to which business incubation delivers added value. Thus, there is a growing awareness among researchers, practitioners and policy makers of the need for more rigorous evaluation of the business incubation output performance. Aligned to this is an increasing demand for benchmarking business incubation input/process performance and highlighting best practice. This paper offers a business incubation assessment framework, which considers input/process and output performance domains with relevant indicators. This tool adds value on different levels. It has been developed in collaboration with practitioners and industry experts and therefore it would be relevant and useful to business incubation managers. Once a large enough database of completed questionnaires has been populated on an online platform managed by a coordinating mechanism, such as a business incubation membership association, business incubator managers can reflect on their practices by using this assessment framework to learn their relative position vis-à-vis their peers against each domain. This will enable them to align with best practice in this field. Beyond implications for business incubation management practice, this performance assessment framework would also be useful to researchers and policy makers concerned with business incubation management practice and impact. Future large-scale research could test for construct validity and reliability. Also, discriminant analysis could help link input and process indicators with output measures.

An empirical examination of the strategic decision-making process:the relationship between context, process, and outcomes

Despite concerted academic interest in the strategic decision-making process (SDMP) since the 1980s, a coherent body of theory capable of guiding practice has not materialised. This is because many prior studies focus only on a single process characteristic, often rationality or comprehensiveness, and have paid insufficient attention to context. To further develop theory, research is required which examines: (i) the influence of context from multiple theoretical perspectives (e.g. upper echelons, environmental determinism); (ii) different process characteristics from both synoptic formal (e.g. rationality) and political incremental (e.g. politics) perspectives, and; (iii) the effects of context and process characteristics on a range of SDMP outcomes. Using data from 30 interviews and 357 questionnaires, this thesis addresses several opportunities for theory development by testing an integrative model which incorporates: (i) five SDMP characteristics representing both synoptic formal (procedural rationality, comprehensiveness, and behavioural integration) and political incremental (intuition, and political behaviour) perspectives; (ii) four SDMP outcome variables—strategic decision (SD) quality, implementation success, commitment, and SD speed, and; (iii) contextual variables from the four theoretical perspectives—upper echelons, SD-specific characteristics, environmental determinism, and firm characteristics. The present study makes several substantial and original contributions to knowledge. First, it provides empirical evidence of the contextual boundary conditions under which intuition and political behaviour positively influence SDMP outcomes. Second, it establishes the predominance of the upper echelons perspective; with TMT variables explaining significantly more variance in SDMP characteristics than SD specific characteristics, the external environment, and firm characteristics. A newly developed measure of top management team expertise also demonstrates highly significant direct and indirect effects on the SDMP. Finally, it is evident that SDMP characteristics and contextual variables influence a number of SDMP outcomes, not just overall SD quality, but also implementation success, commitment, and SD speed.

Gold nanoparticles decorated with oligo(ethylene glycol) thiols:protein resistance and colloidal stability

The interactions between proteins and gold colloids functionalized with protein-resistant oligo(ethylene glycol) (OEG) thiol, HS(CH(2))(11) (OCH(2)CH(2))(6)OMe (EG(6)OMe), in aqueous solution have been studied by small-angle X-ray scattering (SAXS) and UV-vis spectroscopy. The mean size, 2R, and the size distribution of the decorated gold colloids have been characterized by SAXS. The monolayer-protected gold colloids have no correlations due to the low volume fraction in solution and are stable in a wide range of temperatures (5-70 degrees C, pH (1.3-12.4), and ionic strength (0-1.0 M). In contrast, protein (bovine serum albumin) solutions with concentrations in the range of 60-200 mg/mL (4.6-14.5 vol show a pronounced correlation peak in SAXS, which results from the repulsive electrostatic interaction between charged proteins. These protein interactions show significant dependence on ionic strength, as would be expected for an electrostatic interaction (Zhang et al. J. Phys. Chem. B 2007, 111, 251). For a mixture of proteins and gold colloids, the protein-protein interaction changes little upon mixing with OEG-decorated gold colloids. In contrast, the colloid-colloid interaction is found to be strongly dependent on the protein concentration and the size of the colloid itself. Adding protein to a colloidal solution results in an attractive depletion interaction between functionalized gold colloids, and above a critical protein concentration, c*, the colloids form aggregates and flocculate. Adding salt to such mixtures enhances the depletion effect and decreases the critical protein concentration. The aggregation is a reversible process (i.e., diluting the solution leads to dissolution of aggregates). The results also indicate that the charge of the OEG self-assembled monolayer at a curved interface has a rather limited effect on the colloidal stabilization and the repulsive interaction with proteins.

Placebo expectancy effect of consuming psychoactive beverages on cognition and mood

Energy drinks have become very popular over the past few years with over half the student population in colleges and universities consuming them at least once a month (Malinauskas et al., 2007). It has been reported that the most common reasons why students consume energy drinks are to maintain alertness, reduce symptoms of hangover, increase energy, to help with driving and to prevent sleepiness (Attila and Cakir, 2011; Malinauskas et al., 2007). Previous research has suggested that energy drinks enhance sensorimotor speed, behaviour, and reduce levels of fatigue (Alford et al., 2001; Horne and Reyner, 2001; Howard and Marczinski, 2010; Kennedy and Scholey, 2004; Smit et al., 2004). The two key ingredients found in energy drinks are caffeine and glucose which have been examined together and alone, which have indicated enhanced reaction times, improvement in both verbal memory and sustained attention and more recently there is evidence to show that expectancy may play a key role in predicting intentions of future consumption (Adan and serra-Grabulosa, 2010). According to Kirsch (1997) people have specific expectations when they consume psychoactive substances that trigger physiological and psychological reactions, which tend to be independent of the psychoactive substance ingested. The concept of expectancy effects can be unambiguous especially when the information provided to the participants prior to the experimental study is specific to a possible outcome response. This thesis investigated the extent of expectancy effect on cognition and mood when psychoactive drinks containing caffeine and glucose were consumed in comparison to non-psychoactive drinks. The investigation commenced with examining the independent effects of caffeine and glucose, followed by the combination of caffeine and glucose as an energy drink on mood and cognition. The investigation advanced by comparing drink presentation effects (i.e., consuming the experimental drink from a branded bottle versus from a glass) irrespective of drink content on mood and cognition. Finally, the investigation lead to exploring what factors may predict expectancy effects when participants’ consumed psychoactive drinks among healthy adults. This was done by applying the Theory of Planned Behaviour model (TPB) (Azjen, 1991) to explore the contribution of specific attitudes, subjective norms and perceived behavioural control to the extent of expectancy effects as well as to behavioural intention, with additional variables including; beliefs, habits, past-behaviour, selfidentity. Self-identity representing someone who drinks energy drinks regularly. The level of internal consistency for Cronbach’s alpha was conducted for each variable within the TPB model and for the additional variables included for test reliability. This thesis consisted of four studies, which found that consumption of caffeine and glucose independently and also in combination resulted in psychoactive effects on mood and cognition. Experiment 2 was the only study, which indicated an expectancy effect for immediate verbal recall task and the mood subscale tension. Conversely, for experiment 4 there was a reverse effect found for the immediate verbal recall task. However, there were significant expectancy and psychoactive effects found for mood subscales throughout the four studies. It was also found that the TPB model had two significant variables past-behaviour and self-identity predicted intentions suggesting that participants who regularly consume psychoactive beverages have salient beliefs about consuming psychoactive drinks and the TPB model can be utilised to predict their intentions. Furthermore, the Theory of planned behaviour model found that habit and self-identity significantly predicted participants’ expectancy effects on the vigour. Indicating consumers of energy drinks are familiar with expected outcome response. This model was unsuccessful in predicting expectancy response for cognitive performance. Thus, overall the findings from the four studies indicated that caffeine and glucose have cognitive enhancing properties, which also positively improve mood. However, expectancy effects have been identified for mood only, whereas the overall findings within this thesis were unable to identify significant predictors of expectancy effect and response.