Experiences on dynamic simulation software in chemical engineering education

Commercial process simulators are increasing interest in the chemical engineer education. In this paper, the use of commercial dynamic simulation software, D-SPICE® and K-Spice®, for three different chemical engineering courses is described and discussed. The courses cover the following topics: basic chemical engineering, operability and safety analysis and process control. User experiences from both teachers and students are presented. The benefits of dynamic simulation as an additional teaching tool are discussed and summarized. The experiences confirm that commercial dynamic simulators provide realistic training and can be successfully integrated into undergraduate and graduate teaching, laboratory courses and research. © 2012 The Institution of Chemical Engineers.

How do engineering students develop practical competencies during a period of industrial placement? - Students' perceptions

This paper explores engineering students' perceptions of developing practical competencies as experienced in their industrial placements. In addition, it discusses the criticisms in the literature on Problem Based Learning, Project Based Learning and Conceive-Design-Implement-Operate in relation to the evaluation of effective learning and teaching during placements. The paper goes on to discuss a study which examines how undergraduate engineering students develop practical competencies during their industrial placements. A phenomenological research approach is adopted using in-depth interviews and document analysis. The research findings from this PhD study will contribute to the knowledge, theory and practice for the students, the industries and the institutions of higher education as students' practical competencies are developed and graduate employability rises. In conclusion, this study explores students' experiences of developing practical competencies during industrial placements. Hence, the study should be able to contribute to a set of evidence-based guidelines for higher education institutions and industry.

Engineering education research - the UK perspective at a time of change

Engineering education in the United Kingdom is at the point of embarking upon an interesting journey into uncharted waters. At no point in the past have there been so many drivers for change and so many opportunities for the development of engineering pedagogy. This paper will look at how Engineering Education Research (EER) has developed within the UK and what differentiates it from the many small scale practitioner interventions, perhaps without a clear research question or with little evaluation, which are presented at numerous staff development sessions, workshops and conferences. From this position some examples of current projects will be described, outcomes of funding opportunities will be summarised and the benefits of collaboration with other disciplines illustrated. In this study, I will account for how the design of task structure according to variation theory, as well as the probe-ware technology, make the laws of force and motion visible and learnable and, especially, in the lab studied make Newton's third law visible and learnable. I will also, as a comparison, include data from a mechanics lab that use the same probe-ware technology and deal with the same topics in mechanics, but uses a differently designed task structure. I will argue that the lower achievements on the FMCE-test in this latter case can be attributed to these differences in task structure in the lab instructions. According to my analysis, the necessary pattern of variation is not included in the design. I will also present a microanalysis of 15 hours collected from engineering students' activities in a lab about impulse and collisions based on video recordings of student's activities in a lab about impulse and collisions. The important object of learning in this lab is the development of an understanding of Newton's third law. The approach analysing students interaction using video data is inspired by ethnomethodology and conversation analysis, i.e. I will focus on students practical, contingent and embodied inquiry in the setting of the lab. I argue that my result corroborates variation theory and show this theory can be used as a 'tool' for designing labs as well as for analysing labs and lab instructions. Thus my results have implications outside the domain of this study and have implications for understanding critical features for student learning in labs. Engineering higher education is well used to change. As technology develops the abilities expected by employers of graduates expand, yet our understanding of how to make informed decisions about learning and teaching strategies does not without a conscious effort to do so. With the numerous demands of academic life, we often fail to acknowledge our incomplete understanding of how our students learn within our discipline. The journey facing engineering education in the UK is being driven by two classes of driver. Firstly there are those which we have been working to expand our understanding of, such as retention and employability, and secondly the new challenges such as substantial changes to funding systems allied with an increase in student expectations. Only through continued research can priorities be identified, addressed and a coherent and strong voice for informed change be heard within the wider engineering education community. This new position makes it even more important that through EER we acquire the knowledge and understanding needed to make informed decisions regarding approaches to teaching, curriculum design and measures to promote effective student learning. This then raises the question 'how does EER function within a diverse academic community?' Within an existing community of academics interested in taking meaningful steps towards understanding the ongoing challenges of engineering education a Special Interest Group (SIG) has formed in the UK. The formation of this group has itself been part of the rapidly changing environment through its facilitation by the Higher Education Academy's Engineering Subject Centre, an entity which through the Academy's current restructuring will no longer exist as a discrete Centre dedicated to supporting engineering academics. The aims of this group, the activities it is currently undertaking and how it expects to network and collaborate with the global EER community will be reported in this paper. This will include explanation of how the group has identified barriers to the progress of EER and how it is seeking, through a series of activities, to facilitate recognition and growth of EER both within the UK and with our valued international colleagues.

Building bridges for future sustainability? Breaching the research-teaching nexus in engineering education

The relationship between research and learning and teaching represents what has been described as amongst the most intellectually tangled, managerially complex and politically contentious issues in mass higher education (Scott, 2005, p 53). Despite this, arguments that in order to achieve high quality scholarly outcomes, university teachers need to adopt an approach to teaching similar to that of research (founded upon academic rigour and evidence), has long been discussed in the literature. However, the practicalities of promoting an empirical and evidence-based approach to teaching in engineering education make dealing with the research / teaching nexus a somewhat challenging proposition. Using a phenomenographic approach, bringing together and applying the findings of a mixed methodological study, the workshop will adopt an activity based, interactive approach to encourage staff to consider the challenges and benefits of adopting an evidence-based approach to learning and teaching through the utilisation of research to inform their own practice. © 2009 Authors.

Entrepreneurship and innovation through experience:student and employer perspectives of the value of work-based learning in promoting entrepreneurialism

The 'internationalisation' of Business and Management education, reflective of EU enlargement and the unprecedented globalisation of education, has resulted in growing numbers of overseas students adding a diversity and richness to the learning environment within many contemporary European Higher Educational Institutions (Green, 2006, Sliwa & Grandy, 2006). However, cross-national studies analyzing the impact that the internationalisation of business education has on the employability of business and management graduates are rare. Furthermore, there exists a notable gap in research aimed at identifying and conceptualising the generic business skills and competencies required by European employers of business and management graduates. By proposing a conceptual framework based upon a working model of business graduate employability, this goes some way to addressing this gap.

An evaluation of pharmacy education and pre-registration training

This thesis covers two major aspects of pharmacy education; undergraduate education and pre-registration training. A cohort of pharmacy graduates were surveyed over a period of four years, on issues related to undergraduate education, pre-registration training and continuing education. These graduates were the first-ever to sit the pre-registration examination. In addition, the opinions of pre-registration tutors were obtained on pre-registration training, during the year that competence-based assessment was introduced. It was concluded that although the undergraduate course provided a broad base of knowledge suitable for graduates in all branches of pharmacy, several issues were identified which would require attention in future developments of the course. These were: 1. the strong support for the expansion of clinical, social and practice-based teaching. 2. the strong support to retain the scientific content to the same extent as in the three-year course. 3. a greater use of problem-based learning methods. The graduates supported the provision of a pre-registration continuing education course to help prepare for the examination and in areas inadequately covered in the undergraduate course. There was also support for the introduction of some form of split branch training. There was no strong evidence to suggest that the training had been an application of undergraduate education. In general, competence-based training was well regarded by tutors as an appropriate and effective method of skill assessment. However, community tutors felt it was difficult to carry out effectively due to day-to-day time constraints. The assistant tutors in hospital pharmacy were found to have a very important role in provision of training, and should be adequately trained and supported. The study recommends the introduction of uniform training and a quality assurance mechanism for all tutors and assistants undertaking this role.

Researching primary engineering education:a UK perspective, an exploratory study

This paper draws attention to the findings of an exploratory study that critically identified and analysed relevant perceptions of elementary level engineering education within the UK. Utilising an approach based upon grounded theory methodology, 30 participants including teachers, representatives of government bodies and non-profit providers of primary level engineering initiatives were interviewed. Three main concepts were identified during the analysis of findings, each relevant to primary engineering education. These were pedagogic issues, exposure to engineering within the curriculum and children's interest. The paper concludes that the opportunity to make a real difference to children's education by stimulating their engineering imagination suggests this subject area is of particular value.

Engineering education for the 21st century:scholarship, synergy and student success

Starting with the question “How can University level Engineering Education be developed in such a way so as to enhance the quality of the student learning experience?”, this discussion paper proposes an approach to engineering education developed by a senior engineering educator working alongside a pedagogical researcher in an attempt to engage colleagues in contemporary debates about the issues currently faced across the Sector. Such issues include difficulties with recruiting students onto programmes as well as high levels of student attrition and failure. Underpinned by three distinctive concepts: Synergy, Variety & Relationships (S+V+R), the approach brings together pedagogic and engineering epistemologies in an empirically grounded framework in such a way so as to provide an accessible and relevant learning approach that, if followed, engenders student success [S2]. Specifically developed with the intention of increasing retention and positively impacting student success [S2], the S+V+R=S2 approach provides a scholarly and Synergetic (S) approach to engineering education that is both innovative and exciting. Building on the argument that Variety (V) in education is pivotal to promoting originality and creativity in learning and teaching, this paper shows how, by purposefully developing a range of learning and teaching approaches, student engagement and thus success can be increased. It also considers the importance of Relationships (R) in higher education, arguing that belonging and relationships are crucial factors impacting student experiences. When taken together (Synergy, Variety and Relationships) and applied within an Engineering Education context, students are provided with a unique learning environment – one that both promotes individual success and improves organisational effectiveness. The uniqueness of the approach is in the synthesis of these three concepts within an Engineering Education epistemology.

IT and learning in Higher Education

Educational institutions are under pressure to provide high quality education to large numbers of students very efficiently. The efficiency target combined with the large numbers generally militates against providing students with a great deal of personal or small group tutorial contact with academic staff. As a result of this, students often develop their learning criteria as a group activity, being guided by comparisons one with another rather than the formal assessments made of their submitted work. IT systems and the World Wide Web are increasingly employed to amplify the resources of academic departments although their emphasis tends to be with course administration rather than learning support. The ready availability of information on the World Wide Web and the ease with which is may be incorporated into essays can lead students to develop a limited view of learning as the process of finding, editing and linking information. This paper examines a module design strategy for tackling these issues, based on developments in modules where practical knowledge is a significant element of the learning objectives. Attempts to make effective use of IT support in these modules will be reviewed as a contribution to the development of an IT for learning strategy currently being undertaken in the author’s Institution.

Engaging employers as partners in work-based learning assessment:proposal for a quality enhancement framework

This paper seeks to advance research and practice related to the role of employers in all stages of the assessment process of work-based learning (WBL) within a tripartite relationship of higher education institution (HEI), student and employer. It proposes a research-informed quality enhancement framework to develop good practice in engaging employers as partners in assessment. The Enhancement Framework comprises three dimensions, each of which includes elements and questions generated by the experiences of WBL students, HEI staff and employers. The three dimensions of the Enhancement Framework are: 1. ‘premises of assessment’ encompassing issues of learning, inclusion, standards and value; 2. ‘practice’, encompassing stages of assessment made up of course design, assessment task, responsibilities, support, grading and feedback; 3. ‘communication of assessment’ with the emphasis on role clarity, language and pathways. With its prompt questions, the Enhancement Framework may be used as a capacity-building tool for promoting, sustaining, benchmarking and evaluating productive dialogue and critical reflection about assessment between WBL partners. The paper concludes by emphasising the need for professional development as well as policy and research development, so that assessment in WBL can more closely correspond to the potentially transformative nature of the learning experience.

Innovating engineering education: the RVS approach:an empirically grounded method to improved practice and enhanced student experience

This paper builds on previous work (Clark, 2009; Clark & Andrews 2011, 2014) to continue the debate around a seemingly universal question…“How can educational theory be applied to engineering education in such a way so as to make the subject more accessible and attractive to students? It argues that there are three key elements to student success; Relationships, Variety & Synergy (RVS). By further examining the purposefully developed bespoke learning and teaching approach constructed around these three elements (RVS) the discourse in this paper links educational theory to engineering education and in doing so further develops arguments for the introduction of a purposefully designed pedagogic approach for use in engineering education.

Tackling transition! Peer mentoring in engineering education:a UK perspective

This paper builds on previous work (Clark, 2009; Clark & Andrews 2011, 2014) to continue the debate around a seemingly universal question…“How can educational theory be applied to engineering education in such a way so as to make the subject more accessible and attractive to students? It argues that there are three key elements to student success; Relationships, Variety & Synergy (RVS). By further examining the purposefully developed bespoke learning and teaching approach constructed around these three elements (RVS) the discourse in this paper links educational theory to engineering education and in doing so further develops arguments for the introduction of a purposefully designed pedagogic approach for use in engineering education.

Technology enhanced learning in Higher Education

Technology-Enhanced Learning in Higher Education is an anthology produced by the international association, Learning in Higher Education (LiHE). LiHE, whose scope includes the activities of colleges, universities and other institutions of higher education, has been one of the leading organisations supporting a shift in the education process from a transmission-based philosophy to a student-centred, learning-based approach. Traditionally education has been envisaged as a process in which the teacher disseminates knowledge and information to the student, and directs them to perform – instructing, cajoling, encouraging them as appropriate – despite different students’ abilities. Yet higher education is currently experiencing rapid transformation, with the introduction of a broad range of technologies which have the potential to enhance student learning. This anthology draws upon the experiences of those practitioners who have been pioneering new applications of technology in higher education, highlighting not only the technologies themselves but also the impact which they have had on student learning. The anthology illustrates how new technologies – which are increasingly well-known and accepted by today’s ‘digital natives’ undertaking higher education – can be adopted and incorporated. One key conclusion is that learning remains a social process even in technology-enhanced learning contexts. So the technology-based proxies we construct need to retain and reflect the agency of the teacher. Technology-Enhanced Learning in Higher Education showcases some of the latest pedagogical technologies and their most creative, state-of-the-art applications to learning in higher education from around the world. Each of the chapters explores technology-enhanced learning in higher education in terms of either policy or practice. They contain detailed descriptions of approaches taken in very different curriculum areas, and demonstrate clearly that technology may and can enhance learning only if it is designed with the learning process of students at its core. So the use of technology in education is more linked to pedagogy than it is to bits and bytes.

Making mole-hills out of mountains:Peer Mentoring in Engineering education - A case-study

Based on the emergent findings of a pilot study which examined the issues around introducing Peer Mentoring into an Engineering School, this paper, which is very much a 'work in progress', describes and discusses results from the first year of what will be a three year exploratory study. Focusing on three distinctive concepts integral to the student experience, Relationships, Variety and Synergy, the study follows an Action Research Design in that it aims to find a realistic and workable solution to issues of attrition within the Engineering School in which the Project and Study are set. Starting with the research question "Does Peer Mentoring improve engineering students' transition into university?"', the Pilot Project and Study will run for three years, each year building on the lessons of the previous year.