Petrology of weathered lower lias clays

In weak argillaceous rocks the unweathered strength may be barely sufficient to meet civil engineering reguirements and any reductjon due to weathering will be critical. This study investigates the weathering of the Lower Lias clays with particular reference to their petrography and engineering properties. Investigations revealed the Midland Basin of deposition to contain reasonable thicknesses of clay, relatively uniform in nature with a well developed weathered zone, From the available exposures, the weathering zone of the Blockley Clay pit was selected and sampled for laboratory investigations of; Structure, Mineralogy and Chemistry and Engineering Properties. The nature and orientation of the fissures in the unweathered clay were analysed. A close relationship was found to exist between the major joint set and the ground surface, with stress release due to excavation being almost negligible. Thin sections of the clay, examined for structural data, suggested that there exist layers or areas that have been disturbed as a result of density differences. Shear planes were found in both the unweathered and weathered clay, in the latter case often associated with remoulding of the material. A direct measure of remoulding was obtained from the birefringence ratio. The fabric was examined in closer detail using the scanning electron microscope. Mineralogy, as revealed by X-ray and optical techniques indicated illite as the dominant clay mineral, with kaolinite subsidiary; quartz, calcite, pyrite, chlorite/vermiculite are present as accessory minerals. Weathering changes this relationship, calcite and pyrite being removed early in the process, with illite being degraded. The cementing action of calcite and iron oxides was investigated however, this was shown to be negligible. Quantitative measurements of both fixed (with minerals) and free (oxide coatings) iron were obtained by atomic absorption, with the Fe 3+/ Fe2+ ratio obtained by Mossbauer spectroscopy, Evidence indicates that free iron oxide coatings only become important as a result of weathering with the maximum concentration in the very highly weathered material. Engineering index properties and shear strength values were taken throughout the profile, Relationships between moisture content and strength, liquid limit and iron (Fe) were obtained and a correlation between the weathering zomes and the shear strength/depth curve has been established.

Safety culture during major organisational change

This research examines the effect of major changes, in the external context, on the safety culture of a UK generating company. It was focused on an organisation which was originally part of the state owned Central Electricity Generating Board and which, by the end of the research period, was a self-contained generating company, operating in a competitive market and a wholly owned subsidiary of a US utility. The research represents an attempt to identify the nature and culture of the original organisation and to identify, analyse and explain the effects of the forces of change in moulding the final organisation. The research framework employed a qualitative methodology to investigate the effects of change, supported by a safety culture questionnaire, based on factors identified in the third report of the ACSNI Human Factors Study Group; Organising for Safety, as being indicators of safety culture. An additional research objective was to assess the usefulness of the ACSNI factors as indicators of safety culture. Findings were that the original organisation was an engineering dominated technocracy with a technocentric safety culture. Values and beliefs were very strongly held and resistant to change and much of the original safety culture survived unchanged into the new organisation. The effects of very long periods of uncertainty about the future were damaging to management/worker relationships but several factors were identified which effectively insulated the organisation from any of the effects of change. The forces of change had introduced a beneficial appreciation of the crucial relationship between safety risk assessment and commercial risk assessment.Although the technical strength of the original safety culture survived, so did the essential weakness of a low level of appreciation of the human behavioural aspects of safety. This led to a limited, functionalist world view of safety culture, which assumed that cultural change was simpler to achieve than was the case and an inability to make progress in certain areas which were essentially behavioural problems.The factors identified by ACSNI provided a useful basis for the site research methodology and for identifying areas of relative strength and weakness in the site safety arrangements.

The development of chemical exposure limits for the workplace

The thesis examines and explains the development of occupational exposure limits (OELs) as a means of preventing work related disease and ill health. The research focuses on the USA and UK and sets the work within a certain historical and social context. A subsidiary aim of the thesis is to identify any short comings in OELs and the methods by which they are set and suggest alternatives. The research framework uses Thomas Kuhn's idea of science progressing by means of paradigms which he describes at one point, `lq ... universally recognised scientific achievements that for a time provide model problems and solutions to a community of practitioners. KUHN (1970). Once learned individuals in the community, `lq ... are committed to the same rules and standards for scientific practice. Ibid. Kuhn's ideas are adapted by combining them with a view of industrial hygiene as an applied science-based profession having many of the qualities of non-scientific professions. The great advantage of this approach to OELs is that it keeps the analysis grounded in the behaviour and priorities of the groups which have forged, propounded, used, benefited from, and defended, them. The development and use of OELs on a larger scale is shown to be connected to the growth of a new profession in the USA; industrial hygiene, with the assistance of another new profession; industrial toxicology. The origins of these professions, particularly industrial hygiene, are traced. By examining the growth of the professions and the writings of key individuals it is possible to show how technical, economic and social factors became embedded in the OEL paradigm which industrial hygienists and toxicologists forged. The origin, mission and needs of these professions and their clients made such influences almost inevitable. The use of the OEL paradigm in practice is examined by an analysis of the process of the American Conference of Governmental Industrial Hygienists, Threshold Limit Value (ACGIH, TLV) Committee via the Minutes from 1962-1984. A similar approach is taken with the development of OELs in the UK. Although the form and definition of TLVs has encouraged the belief that they are health-based OELs the conclusion is that they, and most other OELs, are, and always have been, reasonably practicable limits: the degree of risk posed by a substance is weighed against the feasibility and cost of controlling exposure to that substance. The confusion over the status of TLVs and other OELs is seen to be a confusion at the heart of the OEL paradigm and the historical perspective explains why this should be. The paradigm has prevented the creation of truly health-based and, conversely, truly reasonably practicable OELs. In the final part of the thesis the analysis of the development of OELs is set in a contemporary context and a proposal for a two-stage, two-committee procedure for producing sets of OELs is put forward. This approach is set within an alternative OEL paradigm. The advantages, benefits and likely obstacles to these proposals are discussed.

The role of audiometry in the prevention of occupational deafness

The research set out to test three main hypotheses derived from a summary of literature relevant to the use of audiometry in industry. These hypotheses were: (1) performing audiometry increases the probability that hearing protectors, once issued, will be worn; (2) audiometry is considered by workers to be evidence of their employer's concern for their welfare; (3) audiometry is associated with common law claims by workers against employers for alleged occupational deafness. Six subsidiary hypotheses were also developed. Four methods of data collection were used: (1) attitude questionnaires were administered to samples of workers drawn from an industrial company performing audiometry and two industrial companies not performing audiometry; (2) a postal questionnaire was sent out to industrial medical officers; (3) surveys were undertaken to assess the proportion of the workforce in each of eight industrial companies that was wearing personal hearing protectors that had been provided; (4) structured interviews were carried out with relevant management level personnel in each of five industrial companies. Factor analysis was the main statistical analytic technique used. The data supported all three main hypotheses. Audiometry was also examined as an example of medical screening procedure. It was argued that the validation of medical screening procedures requires the satisfaction of attitudinal or motivational validation criteria in addition to the biological and economic criteria currently used. It was concluded that industrial audiometry failed to satisfy such attitudinal or motivational criteria and so should not be part of a programme of screening for occupational deafness. It was also concluded that industrial audiometry may be useful in creating awareness, amongst workers, of occupational deafness. It was argued that the only profitable approach to investigating the role of audiometry in preventing occupational deafness is to study the attitudes and perceptions of everyone involved.

Challenges and limitations of intercultural training for inpatriates in German multinationals:a case study

Despite the increasing popularity of research on intercultural preparation and its effectiveness, research on training for inpatriates has not been developed with the same level of rigour as research on training for expatriates. Furthermore, research on intercultural training hardly ever includes the aspect of preparing for the corporate culture of a company. For expatriates coming from headquarters’ national culture and equipped with a good knowledge of headquarters’ corporate culture, it might be sufficient to address only the national culture of the location abroad. But can the same be said for inpatriates coming from a foreign subsidiary? Therefore the qualitative research of my thesis was aimed at finding out if intercultural training programmes that address only the national culture of the host country are sufficient to prepare inpatriates for working at headquarters. A case study using a German multinational company has been conducted in order to find out what kind of problems and irritations inpatriates at the company’s headquarters perceive at work. In order to determine whether the findings are related to the national or the corporate culture, Hall’s and Hofstede’s approaches to culture were used. The interview analysis produced the following conclusion: Although the researched company promotes standardised worldwide corporate guidelines, there are many differences between headquarters and subsidiaries regarding the interpretation and realisation of these guidelines. These differences cause irritation, confusion and problems for the inpatriates. Therefore an effective intercultural preparation for inpatriates should be tailor-made and take into account the aspect of corporate culture, as well as the specific roles and functions of inpatriates.

German-Irish corporate relationships:the cultural dimension

The thesis raises the question of whether or not in an age of internationalisation and globalisation, the cultural differences which exist between Germany and Ireland are still relevant to German-Irish corporate relationships or have internationally accepted best practices removed culture from the equation? The first three chapters establish the theoretical framework of the thesis by outlining the broadly culturalist/institutionalist approach, based on the work of Hofstede and Maurice et al, to be pursued, profiling the business cultures of both countries by analysing the components of their respective national institutional frameworks, and the examining existing approaches to the study of mother company-foreign subsidiary relationships. Chapters four to seven constitute the empirical section of the thesis. Using the interviews carried out with two sample groups (Sample Group A: 15 German mother companies and 14 of their Irish operations and Sample Group B: 7 Irish mother companies and 9 of their German operations), the mother companies in both groups are examined to see whether or not they demonstrate characteristics which are in keeping with their national business cultures. Their foreign operations are then analysed as is the mother company-foreign subsidiary relationship to determine whether or not any mother company influences are visible. The general approaches adopted by the two groups of mother companies to their foreign operations are compared and contrasted. Finally, differences in national attitudes and values are identified and their impact assessed. The analysis reveals that despite existing pressures towards convergence, the cultural differences between both countries are still relevant to the relationship particularly at the level of attitudes and values and although similarities in the mother company approaches to their subsidiaries are present, national specificities may nevertheless be detected.

Representational modes of thinking employed by children aged thirteen and fourteen, and their relationship to performance in standardised tests of ability, measures of creativity and personality

This thesis proposes that despite many experimental studies of thinking, and the development of models of thinking, such as Bruner's (1966) enactive, iconic and symbolic developmental modes, the imagery and inner verbal strategies used by children need further investigation to establish a coherent, theoretical basis from which to create experimental curricula for direct improvement of those strategies. Five hundred and twenty-three first, second and third year comprehensive school children were tested on 'recall' imagery, using a modified Betts Imagery Test; and a test of dual-coding processes (Paivio, 1971, p.179), by the P/W Visual/Verbal Questionnaire, measuring 'applied imagery' and inner verbalising. Three lines of investigation were pursued: 1. An investigation a. of hypothetical representational strategy differences between boys and girls; and b. the extent to which strategies change with increasing age. 2. The second and third year children's use of representational processes, were taken separately and compared with performance measures of perception, field independence, creativity, self-sufficiency and self-concept. 3. The second and third year children were categorised into four dual-coding strategy groups: a. High Visual/High Verbal b. Low Visual/High Verbal c. High Visual/Low Verbal d. Low Visual/Low Verbal These groups were compared on the same performance measures. The main result indicates that: 1. A hierarchy of dual-coding strategy use can be identified that is significantly related (.01, Binomial Test) to success or failure in the performance measures: the High Visual/High Verbal group registering the highest scores, the Low Visual/High Verbal and High Visual/Low Verbal groups registering intermediate scores, and the Low Visual/Low Verbal group registering the lowest scores on the performance measures. Subsidiary results indicate that: 2. Boys' use of visual strategies declines, and of verbal strategies increases, with age; girls' recall imagery strategy increases with age. Educational implications from the main result are discussed, the establishment of experimental curricula proposed, and further research suggested.

Investing in conflict zones:a firm-level analysis

The purpose of this paper is to examine, using panel data econometric techniques, the determinants of a firm’s strategy to invest in a conflict location. To the best of our knowledge this has not been done before. We use a large database of firm-level data that includes 2858 multinational firms that have a subsidiary in a developing country (during 1999-2006). Out of these firms 290 are classified as having a subsidiary in a conflict location. The choice of a conflict location is based on data from the Inter Country Risk Guide (ICRG). We start with the population of multinationals who have chosen to invest in low income countries with weak institutions. Our analysis then proceeds to explain the decision of those firms to invest in conflict locations. We have four hypotheses: (1) Firms with concentrated ownership are more likely to invest in a conflict region; (2) Firms from countries with weaker institutions are more likely to invest in conflict regions; (3) Firms and Countries with less concern over corporate social responsibility are more likely to invest in conflict countries; and (4) that there is large sector level differences in the propensity to invest in a conflict region. The results suggest that all of these hypotheses can be confirmed.

Transferring knowledge of manufacturing techniques in multinational corporations:preliminary findings

With the growth of the multinational corporation (MNC) has come the need to understand how parent companies transfer knowledge to, and manage the operations of, their subsidiaries. This is of particular interest to manufacturing companies transferring their operations overseas. Japanese companies in particular have been pioneering in this regard, with techniques such as the Toyota Production System (TPS) for transferring the ethos of Japanese manufacturing and maintaining quality and control in overseas subsidiaries. A great deal has been written about the process of transferring Japanese manufacturing techniques, but much less is understood about how the subsidiaries themselves, which are required to make use of such techniques, actually acquire and incorporate them into their operations. The research on which this paper is based therefore examines how, from the perspective of the subsidiary, knowledge of manufacturing techniques is transferred from the parent company. There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate knowledge about manufacturing techniques into their working practices. In-depth qualitative research was, therefore, conducted in the subsidiary of a Japanese multinational, Denso Corporation, involving three main manufacturing initiatives (or philosophies), namely ‘TPS’, ‘TPM’ and ‘TS’. The case data were derived from 52 in-depth interviews with project members, moderate participant observations, and documentations. The aim of this paper is to present the preliminary findings from the case analyses. The research contributes to our understanding of knowledge transfer in relation to the circumstances of the selection between adaptation and replication of knowledge in the subsidiary from its parent. In particular this understanding relates to transfer across different flows and levels in the organisational hierarchy, how the whole process is managed, and also how modification takes place.

The eye and vision:an overview

The eye is the major organ of vision and highly specialized for photoreception. It focusses light from an object onto the light-sensitive retina. Changes in specialized neurons in the retina result in nerve action potentials which are relayed to the brain via the optic nerve. Visual processing by the brain results in ‘visual perception’, the construction of a sensory image which is consciously appreciated as vision. All other structures of the eye are subsidiary to this function, either by facilitating focusing of light rays or by supporting the tissues of the eye. This chapter is an introduction to the various parts of the eye including the eyelids and associated structures, conjunctiva, cornea, sclera, iris, lens, vitreous body, retina, optic disc and nerve, and orbit. This chapter describes the functions of these various structures and their importance in achieving a visual image.

Synthesis and screening of potential antimicrobial compounds

Tuberculosis (TB), an infection caused by human pathogen Mycobacterium tuberculosis, continues to kill millions each year and is as prevalent as it was in the pre-antimicrobial era. With the emergence of continuously-evolving multi-drug resistant strains (MDR) and the implications of the HIV epidemic, it is crucial that new drugs with better efficacy and affordable cost are developed to treat TB. With this in mind, the first part of this thesis discusses the synthesis of libraries of derivatives of pyridine carboxamidrazones, along with cyclised (1,2,4-triazole and 1,2,4-oxadiazole) and fluorinated analogues. Microbiological screening against M. tuberculosis was carried out at the TAACF, NIAID and IDRI (USA). This confirmed the earlier findings that 2-pyridyl-substituted carboxamidrazones were more active than the 4-pyridyl-substituted carboxamidrazones. Another important observation was that upon cyclisation of these carboxamidrazones, a small number of the triazoles retained their activity while in most of the remaining compounds the activity was diminished. This might be attributed to the significant increase in logP value caused by cyclisation of these linear carboxamidrazones, resulting in high lipophilicity and decreased permeability. Another reason might be that the rigidity conferred upon the compound due to cyclisation, results in failure of the compound to fit into the active site of the putative target enzyme. In order to investigate the potential change to the compounds’ metabolism in the organism and/or host, the most active compounds were selected and a fluorine atom was introduced in the pyridine ring. The microbiological results shows a drastic improvement in the activity of the fluorinated carboxamidrazone amides as compared to their non fluorinated counterpart. This improvement in the activity could possibly be the result of the increased cell permeability caused by the fluorine. In a subsidiary strand, a selection of long-chain , -unsaturated carboxylic esters, -keto, -hydroxy carboxylic esters and -keto, -hydroxy carboxylic esters, structurally similar to mycolic acids, were synthesised. The microbiological data revealed that one of the open chain compound was active against the Mycobacterium tuberculosis H37Rv strain and some resistant isolates. The possible compound activity could be its potential to disrupt mycobacterial cell wall synthesis by interfering with the FAS-II pathway.

Global HR roles and factors influencing their development:evidence from emerging Indian IT services multinationals

The rapid growth of emerging markets’ multinational companies (MNCs) is a recent phenomenon and, as such, their nature and structure of key management processes, functions, and roles need further examination. While an abundance of low-cost labor is often the starting point of competitive advantage for many of the emerging markets’ MNCs, it is the optimum configuration of people, processes, and technology that defines how they leverage their intangible resources. Based on case studies of four Indian IT services MNCs, involving 51 in-depth interviews of business and human resource (HR) leaders at the corporate and subsidiary levels, we identify five key HR roles—namely, strategic business partner, guardian of culture, builder of global workforce and capabilities, champion of processes, and facilitator of employee development. The analysis also highlights that the HR function in Indian IT service MNCs faces several challenges in consolidating the early gains of internationalization, such as lack of decentralized decision making, developing a global mind-set, localization of the workforce, and developing a global leadership pipeline. Based on our exploratory findings, we propose a framework outlining the global HR roles pursued by emerging IT services MNCs, the factors influencing them, and the challenges facing their HR function for future research.

The Digital Observatory for Protected Areas (DOPA) as a support tool for protected area planning, financing and reporting

The Joint Research Centre (JRC) of the European Commission has developed, in consultation with many partners, the DOPA as a global reference information system to support decision making on protected areas (PAs) and biodiversity conservation. The DOPA brings together the World Database on Protected Areas with other reference datasets on species, habitats, ecoregions, threats and pressures, to deliver critical indicators at country level and PA level that can inform gap analyses, PA planning and reporting. These indicators are especially relevant to Aichi Targets 11 and 12, and have recently contributed to CBD country dossiers and capacity building on these targets. DOPA also includes eConservation, a new module that provides a means to share and search information on conservation projects, and thus allows users to see “who is doing what where”. So far over 5000 projects from the World Bank, GEF, CEPF, EU LIFE Programme, CBD LifeWeb Initiative and others have been included, and these projects can be searched in an interactive mapping interface based on criteria such as location, objectives, timeframe, budget, the organizations involved, target species etc. This seminar will provide an introduction to DOPA and eConservation, highlight how these services are used by the CBD and others, and include ample time for discussion.

New product development proficiency and multi-country product rollout timeliness

Purpose: The purpose of this paper is to address a gap in the understanding of the indirect effects of marketing and technical factors on time efficiency in developing a new product and international new product launch. Design/methodology/approach: This paper adopts a contingency perspective in examining the relationships between antecedents and on-time completion (or timeliness) of new product development (NPD) and international new product rollout (INPR). A conceptual framework is tested based on data obtained on 232 NPD projects undertaken by Korean firms. Findings: The results show that NPD proficiencies mediate to a greater or lesser extent the effects of key antecedents (e.g. cross-functional linkages, project fit with available marketing resources, and effective coordination of headquarters-subsidiary/agents' activities) on timeliness in NPD and INPR. Research limitations/implications: Empirical research on the role of marketing and technical proficiencies in improving NPD timeliness and rollout timeliness in the context of international NPD affirms the importance of adopting a contingency perspective in examining the antecedents of NPD and multi-market entry timeliness. Practical implications: This paper lends insight into the role of overseas subsidiaries or agents in helping to build the technical proficiencies of emerging country companies. Originality/value: This is the first review focusing on the mediating influences on time dimensions (e.g. timeliness) in multi-country product launches. © Emerald Group Publishing Limited.