Direct visualization of solute locations in laboratory ice samples, links to videos

Many important chemical reactions occur in polar snow, where solutes may be present in several reservoirs, including at the air-ice interface and in liquid-like regions within the ice matrix. Some recent laboratory studies suggest chemical reaction rates may differ in these two reservoirs. While investigations have examined where solutes are found in natural snow and ice, similar research has not identified solute locations in laboratory samples, nor the possible factors controlling solute segregation. To address this, we examined solute locations in ice samples prepared from either aqueous cesium chloride (CsCl) or Rose Bengal solutions that were frozen using several different methods. Samples frozen in a laboratory freezer had the largest liquid-like inclusions and air bubbles, while samples frozen in a custom freeze chamber had somewhat smaller air bubbles and inclusions; in contrast, samples frozen in liquid nitrogen showed much smaller concentrated inclusions and air bubbles, only slightly larger than the resolution limit of our images (~2 µm). Freezing solutions in plastic versus glass vials had significant impacts on the sample structure, perhaps because the poor heat conductivity of plastic vials changes how heat is removed from the sample as it cools. Similarly, the choice of solute had a significant impact on sample structure, with Rose Bengal solutions yielding smaller inclusions and air bubbles compared to CsCl solutions frozen using the same method. Additional experiments using higher-resolution imaging of an ice sample show that CsCl moves in a thermal gradient, supporting the idea that the solutes in ice are present in liquid-like regions. Our work shows that the structure of laboratory ice samples, including the location of solutes, is sensitive to freezing method, sample container, and solute characteristics, requiring careful experimental design and interpretation of results.

Sulfur in oceans and seas

The book summarizes results of long-term studies of sulfur geochemistry in bottom sediments of seas and oceans. Processes of hydrogen sulfide formation in bacterial reduction of sulfates, its transformation into transient and stable compounds of reduced sulfur in liquid and solid phases of sediments are under consideration. Regularities of distribution of sulfate and reduced sulfur in ocean sediments are shown. Problems of sulfur budget in the modern oceans are discussed.

(Table 1) Polychlorinated biphenyl (PCB) and PCB metabolite concentrations in ringed seals (Phoca hispida) from Svalbard and the Baltic Sea

Polychlorinated biphenyls (PCBs) may induce activity of hepatic enzymes, mainly Phase I monooxygenases and conjugating Phase II enzymes, that catalyze the metabolism of PCBs leading to formation of metabolites and to potential adverse health effects. The present study investigates the concentration and pattern of PCBs, the induction of hepatic phase I and II enzymes, and the formation of hydroxy (OH) and methylsulfonyl (CH3SO2=MeSO2) PCB metabolites in two ringed seal (Phoca hispida) populations, which are contrasted by the degree of contamination exposure, that is, highly contaminated Baltic Sea (n = 31) and less contaminated Svalbard (n = 21). Phase I enzymes were measured as ethoxyresorufin-O-deethylation (EROD), benzyloxyresorufin-O-dealkylation (BROD), methoxyresorufin-O-demethylation (MROD), and pentoxyresorufin-O-dealkylation (PROD) activities, and phase II enzymes were measured as uridine diphosphophate glucuronosyl transferase (UDPGT) and glutathione-S-transferase (GST). Geographical comparison, multivariate, and correlation analysis indicated that sum-PCB had a positive impact on Phase I enzyme and GST activities leading to biotransformation of group III (vicinal ortho-meta-H atoms and <=1 ortho-chlorine (Cl)) and IV PCBs (vicinal meta-para-H atoms and <=2 ortho-Cl). The potential precursors for the main OH-PCBs detected in plasma in the Baltic seals were group III PCBs. MeSO2-PCBs detected in liver were mainly products of group IV PCB metabolism. Both CYP1A- and CYP2B-like enzymes are suggested to be involved in the PCB biotransformation in ringed seals.

Consolidation properties and strength characteristics of ODP Site 204-1244 sediments

Eight whole-core samples from Ocean Drilling Program Site 1244, Hydrate Ridge, Cascadia continental margin, were provided to Massachusetts Institute of Technology (Cambridge, Massachusetts, USA) for geotechnical characterization. The samples were collected from depths ranging from 5 to 136 meters below seafloor (mbsf). Seven of the eight whole-core samples were located within the gas hydrate stability zone, whereas the eighth sample was located in the free gas zone. Atterberg limits testing showed that the average liquid limit of the soil is 81% and the average plastic limit is 38%, giving an average plasticity index of 43%. The liquid limit is sensitive to oven drying, shown by a drop in liquid limit to 64% when tests were performed on an oven-dried sample. Loss on ignition averages 5.45 wt%. Constant rate of strain consolidation (CRSC) tests were performed to obtain the compression characteristics of the soil, as well as to determine the stress history of the site. CRSC tests also provided hydraulic conductivity and coefficient of consolidation characteristics for these sediments. The compression ratio (Cc) ranges from 0.340 to 0.704 (average = 0.568). Cc is fairly constant to a depth of 79 mbsf, after which Cc decreases downhole. The recompression ratio (Cr) ranges from 0.035 to 0.064 (average = 0.052). Cr is constant throughout the depth range. In situ hydraulic conductivity varies between 1.5 x 10**-7 and 3 x 10**-8 cm/s and shows no trend with depth. Ko-consolidated undrained compression/extension (CKoUC/E) tests were also performed to determine the peak undrained shear strength, stress-strain curve, and friction angle. The normalized undrained strength ranges from 0.29 to 0.35. The friction angle ranges from 27 to 37. Because of the limited amount of soil, CRSC and CKoUC/E tests were also conducted on resedimented specimens.