Mid-Pliocene diatom and palynological assemblages north-northeast of Cape Adare, Antarctica

Microfossil assemblages in Pliocene sediments from DSDP Site 274 (68°59.81'S, 173°2564'E) provide data on the age of the sediments and suggest the presence of Nothofagus (southern beach) in Antarctica during the Pliocene. A suite of 17 samples was collected in an interval from Samples 28-274-6R-1, 83-87 cm to 28-274-11R-4, 73-77 cm (48.33-100.29 mbsf). Biostratigraphic study of the abundant diatom assemblages combined with published radiolarian data indicates that the sample interval ranges in age from 5.0 to 2.2 Ma, with an apparent unconformity between about 3.8 and 3.2 Ma. Nothofagidites (the genus for fossil pollen referable to Nothofagus) occurs throughout the interval, as well as pollen and spores with known stratigraphic ranges that unequivocally indicate reworking from older rocks. Species of Nothofagidites recovered include N. asperus, N. brachyspinulosus, N. flemingii, N. senectus, and N. sp. cf. N. lachlaniae; the latter form is previously known from the Sirius Group in the Transantarctic Mountains. Abundant palynomorphs were recovered in only three of the samples from Site 274 (Samples 28-274-9R-2,15-19 cm; 28-274-9R-2,48-52 cm; and 28-274-9R-2,65-69 cm). Based on the diatom and radiolarian biostratigraphic data, the ages of these samples range from 3.00 to 3.01 Ma. The relative abundance of N. sp. cf. N. lachlaniae in the three samples is an order of magnitude higher than relative abundances for the other species of Nothofagidites in the same samples. The signiticantly higher relative abundance of N. sp. cf. N. luchlaniae suggests that this pollen was derived from trees of Nothofugus that were living in Antarctica during the mid Pliocene. Diatom assemblages from these three samples indicate that sediments in this interval were rapidly deposited as biogenic oozes in an open-ocean setting relatively free of sea ice, thus decreasing the possibility of reworking from a single source bed rich in N. sp. cf. N. lachlaniae. Clearly, more detailed work in additional well-dated cores from around Antarctica is needed before a clear picture of the Neogene history of Antarctic terrestrial vegetation emerges.

Discription of coastal shape at Bykovsky Peninsula

This article presents a comparison of sediment input by rivers and by coastal erosion into both the Laptev Sea and the Canadian Beaufort Sea (CBS). New data on coastal erosion in the Laptev Sea, which are based on field measurements and remote sensing information, and existing data on coastal erosion in the CBS as well as riverine sediment discharge into both the Laptev Sea and the CBS are included. Strong regional differences in the percentages of coastal erosion and riverine sediment supply are observed. The CBS is dominated by the riverine sediment discharge (64.45210**6 t/a) mainly of the Mackenzie River, which is the largest single source of sediments in the Arctic. Riverine sediment discharge into the Laptev Sea amounts to 24.10210**6 t/a, more than 70% of which are related to the Lena River. In comparison with the CBS, the Laptev Sea coast on average delivers approximately twice as much sediment mass per kilometer, a result of higher erosion rates due to higher cliffs and seasonal ice melting. In the Laptev Sea sediment input by coastal erosion (58.4210**6 t/a) is therefore more important than in the CBS and the ratio between riverine and coastal sediment input amounts to 0.4. Coastal erosion supplying 5.6210**6 t/a is less significant for the sediment budget of the CBS where riverine sediment discharge exceeds coastal sediment input by a factor of ca. 10.

Chemistry of upper Eocene microtektites

Late Eocene microtektites and crystal-bearing microkrystites extracted from DSDP and ODP cores from the Atlantic, Pacific, and Indian oceans have been analyzed to address their provenance. A new analysis of Nd and Sr isotopic compositions confirms previous work and the assignment of the uppermost microtektite layer to the North American tektites, which are associated with the 35.5 Ma, 85 km diameter Chesapeake impact structure of Virginia, USA. Extensive major element and Nd and Sr isotopic analyses of the microkrystites from the lowermost layer were obtained. The melanocratic microkrystites from Sites 216 and 462 in the Indian and Pacific oceans possess major element chemistries, Sr and Nd isotopic signatures and Sm-Nd, T CHUR, model ages similar to those of tagamite melt rocks in the Popigai impact structure. They also possess Rb-Sr, T UR, model ages that are younger than the tagamite TCHUR ages by up to ~1 Ga, which require a process, as yet undefined, of Rb/Sr enrichment. These melanocratic microkrystites are consistent with a provenance from the 35.7 Ma, 100 km diameter Popigai impact structure of Siberia, Russia, while ruling out other contemporaneous structures as a source. Melanocratic microkrystites from other sites and leucocratic microkrystites from all sites possess a wide range of isotopic compositions (epsilon (143Nd) values of -16 to -27.7 and epsilon (87Sr) values of 4.1-354.0), making the association with Popigai tagamites less clear. These microkrystites may have been derived by the melting of target rocks of mixed composition, which were ejected without homogenization. Dark glass and felsic inclusions extracted from Popigai tagamites possess epsilon (143Nd) and epsilon (87Sr) values of -26.7 to -27.8 and 374.7 and 432.4, respectively, and T CHUR and T UR model ages of 1640-1870 Ma and 240-1830 Ma, respectively, which require the preservation of initially present heterogeneity in the source materials. The leucocratic microkrystites possess diverse isotopic compositions that may reflect the melting of supra-basement sedimentary rocks from Popigai, or early basement melts that were ejected prior to homogenization of the Popigai tagamites. The ejection of melt rocks with chemistries consistent with a basement provenance, rather than the surface ~1 km of sedimentary cover rocks, atypically indicates a non-surficial source to some of the ejecta. Microkrystites from two adjacent biozones possess statistically indistinguishable major element compositions, suggesting they have a single source. The occurrence of microkrystites derived from a single impact event, but in different biozones, can be explained by: (1) diachronous biozone boundaries; (2) post-accumulation sedimentary reworking; or (3) erroneous biozonation.

Age model and stable isotope record of DSDP holes 48-401 and 86-577

Early Paleogene warm climates may have been linked to different modes and sources of deepwater formation. Warm polar temperatures of the Paleocene and Eocene may have resulted from either increased atmospheric trace gases or increased heat transport through deep and intermediate waters. The possibility of increasing ocean heat transport through the production of warm saline deep waters (WSDW) in the Tethyan region has generated considerable interest. In addition, General Circulation Model results indicate that deepwater source regions may be highly sensitive to changing basin configurations. To decipher deepwater changes, we examined detailed benthic foraminiferal faunal and isotopic records of the late Paleocene through the early Eocene (~60 to 50 Ma) from two critical regions: the North Atlantic (Bay of Biscay Site 401) and the Pacific (Shatsky Rise Site 577). These records are compared with published data from the Southern Ocean (Maud Rise Site 690, Islas Orcadas Rise Site 702). During the late Paleocene, similar benthic foraminiferal delta18O values were recorded at all four sites. This indicates uniform deepwater temperatures, consistent with a single source of deep water. The highest delta13C values were recorded in the Southern Ocean and were 0.5 per mil more positive than those of the Pacific. We infer that the Southern Ocean was proximal to a source of nutrient-depleted deep water during the late Paleocene. Upper Paleocene Reflector Ab was cut on the western Bermuda Rise by cyclonically circulating bottom water, also suggesting a vigorous source of bottom water in the Southern Ocean. A dramatic negative excursion in both carbon and oxygen isotopes occurred in the latest Paleocene in the Southern Ocean. This is a short-term (<100 kyr), globally synchronous event which also is apparent in both the Atlantic and Pacific records as a carbon isotopic excursion of approximately 1 per mil. Faunal analyses from the North Atlantic and Pacific sites indicate that the largest benthic foraminiferal faunal turnover of the Cenozoic was synchronous with the isotopic excursion, lending support to the hypothesis that the extinctions were caused by a change in deepwater circulation. We speculate that the Southern Ocean deepwater source was reduced or eliminated at the time of the excursion. During the early Eocene, Southern Ocean delta13C values remained enriched relative to the North Atlantic and Pacific. However, the Southern Ocean was also enriched in delta18O relative to these basins. We interpret that these patterns indicate that although the Southern Ocean was proximal to a source of cool, nutrient-depleted water, the intermediate to upper deep water sites of the North Atlantic and Pacific were ventilated by a different source that probably originated in low latitudes, i.e., WSDW.

Magnetic extracts of three gravity cores located at the Ceará Rise, the Mid-Atlantic Ridge and the Sierra Leone Rise

The magnetic microparticle and nanoparticle inventories of marine sediments from equatorial Atlantic sites were investigated by scanning and transmission electron microscopy to classify all present detrital and authigenic magnetic mineral species and to investigate their regional distribution, origin, transport, and preservation. This information is used to establish source-to-sink relations and to constrain environmental magnetic proxy interpretations for this area. Magnetic extracts were prepared from sediments of three supralysoclinal open ocean gravity cores located at the Ceará Rise (GeoB 1523-1; 3°49.9'N/41°37.3'W), the Mid-Atlantic Ridge (GeoB 4313-2; 4°02.8'N/33°26.3'W), and the Sierra Leone Rise (GeoB 2910-1; 4°50.7'N/21°03.2'W). Sediments from two depths corresponding to marine isotope stages 4 and 5.5 were processed. This selection represents glacial and interglacial conditions of sedimentation for the western, central, and eastern equatorial Atlantic and avoids interferences from subsurface and anoxic processes. Crystallographic, elemental, morphological, and granulometric data of more than 2000 magnetic particles were collected by scanning and transmission electron microscopy. On basis of these properties, nine particle classes could be defined: detrital magnetite, titanomagnetite (fragmental and euhedral), titanomagnetite-hemoilmentite intergrowths, silicates with magnetic inclusions, microcrystalline hematite, magnetite spherules, bacterial magnetite, goethite needles, and nanoparticle clusters. Each class can be associated with fluvial, eolian, subaeric, and submarine volcanic, biogenic, or chemogenic sources. Large-scale sedimentation patterns are delineated as well: detrital magnetite is typical of Amazon discharge, fragmental titanomagnetite is a submarine weathering product of mid-ocean ridge basalts, and titanomagnetite-hemoilmenite intergrowths are common magnetic particles in West African dust. This clear regionalization underlines that magnetic petrology is an excellent indicator of source-to-sink relations. Hematite encrustations, magnetic spherules, and nanoparticle clusters were found at all investigated sites, while bacterial magnetite and authigenic hematite were only detected at the more oxic western site. At the eastern site, surface pits and crevices were seen on the crystal faces indicating subtle early diagenetic reductive dissolution. It was observed that paleoclimatic signatures of magnetogranulometric parameters such as the ratio of anhysteretic and isothermal remanent magnetizations can be formed either by mixing of multiple sources with separate, relatively narrow grain size ranges (western site) or by variable sorting of a single source with a broad grain size distribution (eastern site). Hematite, goethite, and possibly ferrihydrite nanoparticles occur in all sediment cores studied and have either high-coercive or superparamagnetic properties depending on their partly ultrafine grain sizes. These two magnetic fractions are generally discussed as separate fractions, but we suggest that they could actually be genetically linked.

Fig. S1. Loci of possible event locations based on differential ts - tp arrival times at the single functioning geophone

Geological storage of CO2 that has been captured at large, point source emitters represents a key potential method for reduction of anthropogenic greenhouse gas emissions. However, this technology will only be viable if it can be guaranteed that injected CO2 will remain trapped in the subsurface for thousands of years or more. A signi?cant issue for storage security is the geomechanical response of the reservoir. Concerns have been raised that geomechanical deformation induced by CO2 injection will create or reactivate fracture networks in the sealing caprocks, providing a pathway for CO2 leakage. In this paper, we examine three large-scale sites where CO2 is injected at rates of ab. 1 megatonne/y or more: Sleipner, Weyburn, and In Salah. We compare and contrast the observed geomechanical behavior of each site, with particular focus on the risks to storage security posed by geomechanical deformation. At Sleipner, the large, high-permeability storage aquifer has experienced little pore pressure increase over 15 y of injection, implying little possibility of geomechanical deformation. At Weyburn, 45 y of oil production has depleted pore pressures before increases associated with CO2 injection. The long history of the ?eld has led to complicated, sometimes nonintuitive geomechanical deformation. At In Salah, injection into the water leg of a gas reservoir has increased pore pressures, leading to uplift and substantial microseismic activity. The differences in the geomechanical responses of these sites emphasize the need for systematic geomechanical appraisal before injection in any potential storage site.

A stereo-image analysis JAVA software with links to executable and source code

Scientists planning to use underwater stereoscopic image technologies are often faced with numerous problems during the methodological implementations: commercial equipment is too expensive; the setup or calibration is too complex; or the imaging processing (i.e. measuring objects in the stereo-images) is too complicated to be performed without a time-consuming phase of training and evaluation. The present paper addresses some of these problems and describes a workflow for stereoscopic measurements for marine biologists. It also provides instructions on how to assemble an underwater stereo-photographic system with two digital consumer cameras and gives step-by-step guidelines for setting up the hardware. The second part details a software procedure to correct stereo-image pairs for lens distortions, which is especially important when using cameras with non-calibrated optical units. The final part presents a guide to the process of measuring the lengths (or distances) of objects in stereoscopic image pairs. To reveal the applicability and the restrictions of the described systems and to test the effects of different types of camera (a compact camera and an SLR type), experiments were performed to determine the precision and accuracy of two generic stereo-imaging units: a diver-operated system based on two Olympus Mju 1030SW compact cameras and a cable-connected observatory system based on two Canon 1100D SLR cameras. In the simplest setup without any correction for lens distortion, the low-budget Olympus Mju 1030SW system achieved mean accuracy errors (percentage deviation of a measurement from the object's real size) between 10.2 and -7.6% (overall mean value: -0.6%), depending on the size, orientation and distance of the measured object from the camera. With the single lens reflex (SLR) system, very similar values between 10.1% and -3.4% (overall mean value: -1.2%) were observed. Correction of the lens distortion significantly improved the mean accuracy errors of either system. Even more, system precision (spread of the accuracy) improved significantly in both systems. Neither the use of a wide-angle converter nor multiple reassembly of the system had a significant negative effect on the results. The study shows that underwater stereophotography, independent of the system, has a high potential for robust and non-destructive in situ sampling and can be used without prior specialist training.