Pore pressure measurements on IODP Exp308 sites

Overpressures measured with pore pressure penetrometers during Integrated Ocean Drilling Program (IODP) Expedition 308 reach 70% and 60% of the hydrostatic effective stress (View the MathML source) in the first 200 meters below sea floor (mbsf) at Sites U1322 and U1324, respectively, in the deepwater Gulf of Mexico, offshore Louisiana. High overpressures are present within low permeability mudstones where there have been multiple, very large, submarine landslides during the Pleistocene. Beneath 200 mbsf at Site U1324, pore pressures drop significantly: there are no submarine landslides in this mixture of mudstone, siltstone, and sandstone. The penetrometer measurements did not reach the in situ pressure at the end of the deployment. We used a soil model to determine that an extrapolation approach based on the inverse of square route of time (View the MathML source) requires much less decay time to achieve a desirable accuracy than an inverse time (1/t) extrapolation. Expedition 308 examined how rapid and asymmetric sedimentation above a permeable aquifer drives lateral fluid flow, extreme pore pressures, and submarine landslides. We interpret that the high overpressures observed are driven by rapid sedimentation of low permeability material from the ancestral Mississippi River. Reduced overpressure at depth at Site U1324 suggests lateral flow (drainage) whereas high overpressure at Site U1322 requires inflow from below: lateral flow in the underlying permeable aquifer provides one mechanism for these observations. High overpressure near the seafloor reduces slope stability and provides a mechanism for the large submarine landslides and low regional gradient (2°) offshore from the Mississippi delta.

Trace element contents in zircons from oceanic crust

We present newly acquired trace element compositions for more than 300 zircon grains in 36 gabbros formed at the slow-spreading Mid-Atlantic and Southwest Indian Ridges. Rare earth element patterns for zircon from modern oceanic crust completely overlap with those for zircon crystallized in continental granitoids. However, plots of U versus Yb and U/Yb versus Hf or Y discriminate zircons crystallized in oceanic crust from continental zircon, and provide a relatively robust method for distinguishing zircons from these environments. Approximately 80% of the modern ocean crust zircons are distinct from the field defined by more than 1700 continental zircons from Archean and Phanerozoic samples. These discrimination diagrams provide a new tool for fingerprinting ocean crust zircons derived from reservoirs like that of modern mid-ocean ridge basalt (MORB) in both modern and ancient detrital zircon populations. Hadean detrital zircons previously reported from the Acasta Gneiss, Canada, and the Narryer Gneiss terrane, Western Australia, plot in the continental granitoid field, supporting hypotheses that at least some Hadean detrital zircons crystallized in continental crust forming magmas and not from a reservoir like modern MORB.

Gridded climate data from 5 Global Climate Models (GCM) of the Last Glacial Maximum (LGM) downscaled to 30 arc seconds for Europe, with links to NetCDF files

Studies on the impact of historical, current and future global change require very high-resolution climate data (less or equal 1km) as a basis for modelled responses, meaning that data from digital climate models generally require substantial rescaling. Another shortcoming of available datasets on past climate is that the effects of sea level rise and fall are not considered. Without such information, the study of glacial refugia or early Holocene plant and animal migration are incomplete if not impossible. Sea level at the last glacial maximum (LGM) was approximately 125m lower, creating substantial additional terrestrial area for which no current baseline data exist. Here, we introduce the development of a novel, gridded climate dataset for LGM that is both very high resolution (1km) and extends to the LGM sea and land mask. We developed two methods to extend current terrestrial precipitation and temperature data to areas between the current and LGM coastlines. The absolute interpolation error is less than 1°C and 0.5 °C for 98.9% and 87.8% of all pixels for the first two 1 arc degree distance zones. We use the change factor method with these newly assembled baseline data to downscale five global circulation models of LGM climate to a resolution of 1km for Europe. As additional variables we calculate 19 'bioclimatic' variables, which are often used in climate change impact studies on biological diversity. The new LGM climate maps are well suited for analysing refugia and migration during Holocene warming following the LGM.

Geochemistry and foraminiferal stable isotoe record of sediment core SCS90-36

Changes in the Southeast Asia monsoon winds and surface circulation patterns since the last glaciation are inferred using multiple paleoceanographic indicators including planktic foraminifer faunal abundances, fauna and alkenones sea-surface temperature (SST) estimates, oxygen and carbon isotopes of planktic and benthic foraminifers, and sedimentary fluxes of carbonates and organic carbon obtained from deep-sea core SCS90-36 from the South China Sea (SCS) (17°59.70'N, 111°29.64'E at water depth 2050 m). All these paleoceanographic evidences indicate marked changes in the SCS ocean system over the last glacial toward the Holocene. Planktic foraminiferal faunal SST estimates show stable warm-season SST of 28.6°C, close to the modern value, throughout the glacial-interglacial cycle. In contrast, cold-season SST increases gradually from 23.6°C in the last glacial to a mean value of 26.4°C in the Holocene with a fluctuation of about 3°C during 13-16 ka. SST estimates by UK'37 method reveal less variability and are in average 1-3°C lower than the fauna-derived winter-season SST. These patterns reveal that the seasonality of the SST is not only higher by about 3-4°C in the glacial, but also a function of the winter season SST. Sedimentation rates decrease from the last glacial-deglacial stage to the Holocene due to a reduction in supply of terrigenous components, which led to an increase of carbonate contents. Total organic carbon (TOC) contents of primarily marine sources decrease from the last glacial-deglacial to the Holocene. The last deglaciation is also characterized by high surface productivity as indicated by increased ketones abundances and high mass accumulation rates (MAR) of the TOC and carbonates. The gradient of planktic foraminifer ocygen and carbon isotopes of between surface dwellers and deep dwellers increases significantly toward Termination I and Holocene, and is indiscernibly small in the carbon isotope gradient of between 14 and 24 ka, revealing a deep-mixing condition in surface layers prior to 10 ka. The glacial-interglacial fluctuation of the carbon isotope value of a benthic foraminifer is 0.61%. which is significantly larger than a global mean value. The large carbon isotope fluctuation indicates an amplification of marginal-sea effects which is most likely resulted from an increase in surface productivity in the northern SCS during the last glacial-deglacial stage. The multiple proxies consistently indicate that the last glacial-deglacial stage winter monsoon in the Southeast Asia was probably strengthened in the northern SCS, leading to a development of deep-mixing surface layer conditions and a more efficient nutrient cycling which supports more marine organic carbon production.

Effective stress, porosity, p-wave velocity and mineral composition of ODP Hole 174A-1073A sediments

Porosity, permeability, and compressional (P-wave) velocity were measured as a function of stress on sediments from Ocean Drilling Program Site 1073, U.S. Mid-Atlantic continental slope. Thin sections, scanning electron microscopy, and X-ray diffraction analyses provided mineralogical characteristics of the samples. Uniaxial strain boundary conditions were imposed on the samples during consolidation tests with the maximum effective axial stress reaching 13 MPa. The maximum effective radial stress necessary to maintain uniaxial strain was 7.6 MPa. Over an effective axial stress interval of 0 to 5.2 MPa, Sample 174A-1073A-26X-2, 82-89 cm (226.65 meters below seafloor [mbsf]), exhibited the largest decrease in porosity (51% to 41%), whereas Sample 71X-1, 2-8 cm (644.70 mbsf), exhibited the smallest decrease in porosity (48% to 45%). All samples showed negligible porosity increases during unloading. The permeability (on the order of 1 x 10-17 m**2) of Sample 174A-1073A-71X-1, 2-8 cm, was twice that measured on Sample 8H-1, 23-26 cm (63.75 mbsf), even though the former was considerably deeper and older. The differences in porosity-stress behavior and permeability between shallow and deep samples is related to lithologic, mineralogic, and diagenetic differences between the sediments above and below the Pliocene-Pleistocene to Miocene unconformity. P-wave velocity for Samples 174A-1073A-41X-5, 97-103 cm (372.35 mbsf), and 71X-1, 2-8 cm, increased with decreasing porosity, but did not change significantly during unloading.