Grain size and chemical composition of the surface sediment layer from the Pacific Ocean

The book is devoted to results of studies of Pacific sediment composition, regularities of their distribution and processes of sedimentation in the Pacific Ocean. Materials obtained by Soviet expeditions are the main part of the book.

Grain size and mineral compositions of Pacific red clays

Hypotheses of origin of ocean deep red clays are under discussion. On an example of the Pacific Ocean grain size, mineralogy and chemical composition of clays are considered. It is shown that they formed from atmospheric dust and andesite pyroclastics. Accumulation of the clays occurred through deposition particle-by-particle and by pellet transport.

San Francisco Coastal System grain size and geochemical data for sand provenance study

Over 150 million cubic meter of sand-sized sediment has disappeared from the central region of the San Francisco Bay Coastal System during the last half century. This enormous loss may reflect numerous anthropogenic influences, such as watershed damming, bay-fill development, aggregate mining, and dredging. The reduction in Bay sediment also appears to be linked to a reduction in sediment supply and recent widespread erosion of adjacent beaches, wetlands, and submarine environments. A unique, multi-faceted provenance study was performed to definitively establish the primary sources, sinks, and transport pathways of beach sized-sand in the region, thereby identifying the activities and processes that directly limit supply to the outer coast. This integrative program is based on comprehensive surficial sediment sampling of the San Francisco Bay Coastal System, including the seabed, Bay floor, area beaches, adjacent rock units, and major drainages. Analyses of sample morphometrics and biological composition (e.g., Foraminifera) were then integrated with a suite of tracers including 87Sr/86Sr and 143Nd/144Nd isotopes, rare earth elements, semi-quantitative X-ray diffraction mineralogy, and heavy minerals, and with process-based numerical modeling, in situ current measurements, and bedform asymmetry to robustly determine the provenance of beach-sized sand in the region.

Grain size and heavy mineral analysis of Sander in Schleswig-Holstein, Germany

Die Sandergebiete sind von 5 Zentren her geschüttet, den Gletschertoren bei Flensburg, Frörup/Översee, Idstedt/Lürschau, Schleswig, Owschlag. Die Körnung der Schmelzwassersande nimmt mit zunehmender Entfernung von den Gletschertoren zunächst schnell, von Medianwerten über 1 mm auf Medianwerte um 0,4 mm in 10 km, dann langsam bis auf Medianwerte unter 0,2 mm in 30 km Entfernung ab. Sortierung und Symmetrie der Sande steigen entsprechend. Aus den Kornverteilungen lassen sich die Fließgeschwindigkeiten bei der Ablagerung ablesen. Sie sind geringer gewesen, als es die mächtigen und verbreiteten Akkumulationen erscheinen lassen. Bereits in 6 km Entfernung vom Eisrand flossen die Schmelzwässer als träge Bäche (0,3 m/sec) ab. In den Gletschertoren traten stoßweise extreme Fließgeschwindigkeiten auf, waren aber nur in geringem Maße am Gesamtaufbau der Sander beteiligt. Die Verbreitung der Würmsande paßt sich den Formen einer älteren Landschaft an. Sie läßt sich im behandelten Gebiet mit Hilfe der Schwermineralanalyse deutlich gegenüber den rißzeitlichen Ablagerungen abgrenzen, da die Verteilungen in den verschiedenaltrigen Sedimenten unterschiedlich sind. Vor Allem das Hornblende/Epidotverhältnis (Hornblendezahl nach STEINERT) ist ein gutes Kriterium. Da rißzeitliche Ablagerungen von den Schmelzwässern aufgearbeitet wurden, und zudem die Hornblenden im Laufe des Transportes stark abrollen, verwischen sich die Unterschiede in weiter Entfernung vom Eisrand. Schmelzwassersande der Würmvereisung sind vor Allem im Norden des Arbeitsgebietes weit nach Westen, bis an die nordfriesischen Inseln, geschüttet worden. Die Schmelzwässer benutzten als Durchlässe zu den Senken des Eemmeeres an der Westküste Täler in rißzeitlichen Hochgebieten. Die Wassermengen wurden hier gebündelt, sodaß sich auf den Eemablagerungen im Anschluß an die Durchlässe "Sekundärsander" ausbreiteten. Die Mächtigkeit der anstehenden Würm-Sandergebiete beträgt bis zu 20 m, meistens zwischen 10 und 15 m. An der Westküste sind die Schmelzwasserablagerungen von marinem Alluvium überdeckt. Teile der morphographisch als junge Sanderebenen erscheinenden Gebiete bestehen in Wirklichkeit aus rißzeitlichen, von jungen Schmelzwässern allenfalls oberflächlich umgearbeiteten Ablagerungen der älteren Vereisung. So ist der westliche und südwestliche Teil des Schleisanders schon während der Rißvereisung aufgeschüttet.

XRF measurements, CNS content, grain size and sediment accumulation of sediment core NC_08/01 from lake Nam Co, Tibet

Decadal to sub-decadal variability of inflow, evaporation and biological productivity derived from Lake Nam Co was used to reconstruct hydrological changes for the past ca. 24 k cal a BP. The timing of these variations corresponds to known climatic shifts on the Northern Hemisphere. After a dry and cold Last Glacial Maximum the lake level of Nam Co initially rose at ca. 20 k cal a BP. Moist but further cold conditions between ca. 16.2 and 14 k cal a BP correspond to Heinrich Event 1. A warm and moist phase between ca. 14 and 13 k cal a BP is expressed as a massive enhancement in inflow and biological productivity and might be associated with a first intensification of the Indian Ocean Summer Monsoon coinciding with the Bølling-Allerød complex. A twostep decrease in inflow and a contemporaneous decline in biological productivity until ca. 11.8 k cal a BP points to cool and dry conditions during the Younger Dryas. Lake levels peak at ca. 9.4 k cal a BP, although hydrological conditions remain relatively stable during the Holocene with only low-amplitude variations observed.

Grain-size distribution, carbon and calcium carbonate at DSDP Leg 63 Holes

Sand-silt-clay distribution was determined at Scripps on samples collected at the time the cores were split and described. The sediment classification used here is that of Shepard (1954); sand, silt, and clay boundaries are determined on the basis of the Wentworth (1922) scale. Thus the sand, silt, and clay fractions are composed of particles whose diameters range from 2000 to 62.5 µm, 62.5 to 3.91 µm, and less than 3.91 µm, respectively. This classification is applied regardless of sediment type and origin.

Grain-size, carbon and calcium carbonate at DSDP Leg 77 Holes

Sand-silt-clay distribution was determined on 10-cm**3 sediment samples collected at the time the cores were split and described.

Grain-size, carbona and calcium carbonate at DSDP Leg 58 Holes

Sand-silt-clay distribution was determined on 10-cm**3 sediment samples collected at the time the cores were split and described. The sediment classification used here is that of Shepard (1954), with the sand, silt, and clay boundaries based on the Wentworth (1922) scale. Thus the sand, silt, and clay fractions are composed of particles whose diameters are 2000 to 62.5 µm, 62.5 to 3.91 µm, and less than 3.91 µm, respectively. This classification is applied without regard to sediment type and origin; therefore, the sediment names used in this table may differ from those used elsewhere in this volume; e.g., a silt composed of nannofossils may be called a nannofossil ooze in a site chapter.

Grain size composition and age of ODP Hole 167-1017E sediments

Siliciclastic sedimentation at Ocean Drilling Program Site 1017 on the southern slope of the Santa Lucia Bank, central California margin, responded closely to oceanographic and climatic change over the past ~130 ka. Variation in mean grain-size and sediment sorting within the ~25-m-thick succession from Hole 1017E show Milankovitch-band to submillenial-scale variation. Mean grain size of the "sortable silt" fraction (10-63 µm) ranges from 17.6 to 33.9 µm (average 24.8 µm) and is inversely correlated with the degree of sorting. Much of the sediment has a bimodal or trimodal grain-size distribution that is composed of distinct fine silt, coarse silt to fine sand, and clay-size components. The position of the mode and the sorting of each component changes through the succession, but the primary variation is in the presence or abundance of the coarse silt fraction that controls the overall mean grain size and sorting of the sample. The occurrence of the best-sorted, finest grained sediment at high stands of sea level (Holocene, marine isotope Substages 5c and 5e) reflect the linkage between global climate and the sedimentary record at Site 1017 and suggest that the efficiency of off-shelf transport is a key control of sedimentation on the Santa Lucia Slope. It is not clear what proportion of the variation in grain size and sorting may also be caused by variations in bottom current strength and in situ hydrodynamic sorting.

Grain-size distribution, sedimentation rate and x-ray fluorescence data of four sediment cores off the Senegal River estuary

Fine-grained sediment depocenters on continental shelves are of increased scientific interest since they record environmental changes sensitively. A north-south elongated mud depocenter extends along the Senegalese coast in mid-shelf position. Shallow-acoustic profiling was carried out to determine extent, geometry and internal structures of this sedimentary body. In addition, four sediment cores were retrieved with the main aim to identify how paleoclimatic signals and coastal changes have controlled the formation of this mud depocenter. A general paleoclimatic pattern in terms of fluvial input appears to be recorded in this depositional archive. Intervals characterized by high terrigenous input, high sedimentation rates and fine grain sizes occur roughly contemporaneously in all cores and are interpreted as corresponding to intensified river discharge related to more humid conditions in the hinterland. From 2750 to 1900 and from 1000 to 700 cal a BP, wetter conditions are recorded off Senegal, an observation which is in accordance with other records from NW-Africa. Nevertheless, the three employed proxies (sedimentation rate, grain size and elemental distribution) do not always display consistent inter-core patterns. Major differences between the individual core records are attributed to sediment remobilization which was linked to local hydrographic variations as well as reorganizations of the coastal system. The Senegal mud belt is a layered inhomogeneous sedimentary body deposited on an irregular erosive surface. Early Holocene deceleration in the rate of the sea-level rise could have enabled initial mud deposition on the shelf. These favorable conditions for mud deposition occur coevally with a humid period over NW-Africa, thus, high river discharge. Sedimentation started preferentially in the northern areas of the mud belt. During mid-Holocene, a marine incursion led to the formation of an embayment. Afterwards, sedimentation in the north was interrupted in association with a remarkable southward shift in the location of the active depocenter as it is reflected by the sedimentary architecture and confirmed by radiocarbon dates. These sub-recent shifts in depocenters location are caused by migrations of the Senegal River mouth. During late Holocene times, the weakening of river discharge allowed the longshore currents to build up a chain of beach barriers which have forced the river mouth to shift southwards.

Grain size analysis of sediment core GeoB1510-2

Detailed information about the sediment properties and microstructure can be provided through the analysis of digital ultrasonic P wave seismograms recorded automatically during full waveform core logging. The physical parameter which predominantly affects the elastic wave propagation in water-saturated sediments is the P wave attenuation coefficient. The related sedimentological parameter is the grain size distribution. A set of high-resolution ultrasonic transmission seismograms (-50-500 kHz), which indicate downcore variations in the grain size by their signal shape and frequency content, are presented. Layers of coarse-grained foraminiferal ooze can be identified by highly attenuated P waves, whereas almost unattenuated waves are recorded in fine-grained areas of nannofossil ooze. Color -encoded pixel graphics of the seismograms and instantaneous frequencies present full waveform images of the lithology and attenuation. A modified spectral difference method is introduced to determine the attenuation coefficient and its power law a = kF. Applied to synthetic seismograms derived using a "constant Q" model, even low attenuation coefficients can be quantified. A downcore analysis gives an attenuation log which ranges from -700 dB/m at 400 kHz and a power of n=1-2 in coarse-grained sands to few decibels per meter and n :s; 0.5 in fine-grained clays. A least squares fit of a second degree polynomial describes the mutual relationship between the mean grain size and the attenuation coefficient. When it is used to predict the mean grain size, an almost perfect coincidence with the values derived from sedimentological measurements is achieved.

Eolian mass-accumulation rates and grain size at DSDP Sites 86-576 and 86-578

The mass-accumulation rate and grain size of the total eolian component of North Pacific pelagic clays at Deep Sea Drilling Project Sites 576 and 578 have been used to evaluate changes in eolian sedimentation and the intensity of atmospheric circulation that have occurred during the past 70 m.y. Eolian deposition, an indicator of source area aridity, was low in the Paleocene, Eocene, and Oligocene, apparently reflecting the humid environments of that time as well as the lack of glacial erosion products. A general increase in eoiian accumulation in the Miocene apparently reflects the relative increase in global aridity during the latter part of the Cenozoic. A dramatic increase in eolian accumulation rates in the Pliocene reflects the increased aridity and availability of glacial erosion products associated with Northern Hemisphere glaciation 2.5 m.y. ago. Eolian grain size, an indicator of wind intensity, suggests that Late Cretaceous wind strength was comparable to present-day wind strength. A sharp decrease in eolian grain size across the Paleocene/Eocene boundary is not readily interpreted, but may indicate a significant reduction in the intensity of atmospheric circulation at that time. Fine eolian grain size and low accumulation rates in the Eocene and early Oligocene are in agreement with low early Tertiary thermal gradients and less vigorous atmospheric circulation. Large increases in grain size during the Oligocene, mid-to-late Miocene, and Pliocene appear to be a response to steepening thermal gradients resulting from increasing polar isolation.