Mineralogical and grain size analysis of ODP Hole 119-745B from the Southern Ocean

The upper Miocene to Pleistocene sediments recovered at ODP Sites 745 and 746 in the Australian-Antarctic Basin are characterized by cyclic facies changes. Sedimentological investigations of a detailed Quaternary section reveal that facies A is dominated by a high content of siliceous microfossils, a relatively low terrigenous sediment content, an ice-rafted component, low concentrations of fine sediment particles, and a relatively high smectite content. This facies corresponds to interglacial sedimentary conditions. Facies B, in contrast, is characteristic of glacial conditions and is dominated by a large amount of terrigenous material and a smaller opaline component. There is also a prominent ice-rafted component. The microfossils commonly are reworked and broken. The clay mineral assemblages show higher proportions of glacially derived illite and chlorite. A combination of four different processes, attributed to glacial-interglacial cycles, was responsible for the cyclic facies changes during Quaternary time: transport by gravity, ice, and current and changes in primary productivity. Of great importance was the movement of the grounding line of the ice shelves, which directly influenced the intensity of ice rafting and of gravitational sediment transport to the deep sea. The extension of the ice shelves was also responsible for the generation of cold and erosive Antarctic Bottom Water, which controlled the grain-size distribution, particularly of the fine fraction, in the investigated area.

Clay mineraology and grain size composition of surface sediments from South Pacific Ocean

The reconstruction of low-latitude ocean-atmosphere interactions is one of the major issues of (paleo-)environmental studies. The trade winds, extending over 20° to 30° of latitude in both hemispheres, between the subtropical highs and the intertropical convergence zone, are major components of the atmospheric circulation and little is known about their long-term variability on geological time-scales, in particular in the Pacific sector. We present the modern spatial pattern of eolian-derived marine sediments in the eastern equatorial and subtropical Pacific (10°N to 25°S) as a reference data set for the interpretation of SE Pacific paleo-dust records. The terrigenous silt and clay fractions of 75 surface sediment samples have been investigated for their grain-size distribution and clay-mineral compositions, respectively, to identify their provenances and transport agents. Dust delivered to the southeast Pacific from the semi- to hyper-arid areas of Peru and Chile is rather fine-grained (4-8 µm) due to low-level transport within the southeast trade winds. Nevertheless, wind is the dominant transport agent and eolian material is the dominant terrigenous component west of the Peru-Chile Trench south of ~ 5°S. Grain-size distributions alone are insufficient to identify the eolian signal in marine sediments due to authigenic particle formation on the sub-oceanic ridges and abundant volcanic glass around the Galapagos Islands. Together with the clay-mineral compositions of the clay fraction, we have identified the dust lobe extending from the coasts of Peru and Chile onto Galapagos Rise as well as across the equator into the doldrums. Illite is a very useful parameter to identify source areas of dust in this smectite-dominated study area.

Carbonate and bulk grain-size record for ODP Leg 130 holes

A major goal of Ocean Drilling Program (ODP) Leg 130 was to drill four sites down the northeastern flank of the Ontong Java Plateau to collect a series of continuous sedimentary sequences that would provide a depth transect of Neogene sediments. In particular, the study of the sediments recovered along the depth transect is expected to yield high-resolution stratigraphic, geochemical, and physical properties records across intervals of major paleoceanographic changes by evaluating variations of primary sedimentological and paleoceanographic indicators (e.g., carbonates, isotopes, grain size, microfossil assemblages, etc.). This data report presents the results of highresolution (3-5 Ka sample intervals) analyses of carbonate concentration and bulk sediment grain size at Sites 803-806 for the time interval from 2 Ma to the present.

Grain size analyses of ODP Leg 178 sites

Sites 1095, 1096, and 1101 were drilled on the continental rise west of the Antarctic Peninsula (Fig. F1) to recover a continuous high-resolution record of Antarctic glaciation. Site 1095 is the subject of a short paper in this volume (Pudsey, 2001, doi:10.2973/odp.proc.sr.178.214.2001), whereas mass accumulation rates at the three sites are described by Wolf-Welling (2001, doi:10.2973/odp.proc.sr.178.223.2001) and ice-rafted debris at Site 1101 is discussed by Cowan (2001, doi:10.2973/odp.proc.sr.178.206.2001) This report documents grain-size data (sand and fine fraction) and the proportion of biogenic silica for the upper 300 m at Site 1095, the upper 250 m at Site 1096, and the whole 220 m at Site 1101.

Grain size composition of marine and river bottom sediments

According to average grain size parameters (Kd, Kd1) recent sediments from the northern Caspian Sea and the Barents Sea shelf are similar, while sediments from the Norwegian Sea are closer to their counterparts of the World Ocean. Seaward content of subcolloidal (<0.001 mm) size fraction increases against the background of decreasing proportions of coarse- and medium-grained pelite (<0.01 mm) material.

Grain size analyses of ODP Leg 116 holes

Ocean Drilling Program (ODP) Leg 116 cored the distal part of the Bengal Fan at three closely spaced sites (717-719). The recovered sediments consisted dominantly of turbidites that varied in thickness between a few centimeters and 2 m or more. A number of different facies have been identified in the sequence and are described by Stow et al. (1990, doi:10.2973/odp.proc.sr.116.110.1990). Representative examples of these facies types were selected and sampled for grain-size analysis. The results of these analyses are tabulated in this data report.

Lithic grain and mineral composition of sand and sandstones from the Japan and Mariana forearc and backarc (Table 3)

One hundred and twenty point counts of Oligocene to Recent sands and sandstones from DSDP sites in the Japan and Mariana intraoceanic forearc and backarc basins demonstrate that there is a clear compositional difference between the continentally influenced Japan forearc and backarc sediments, and the totally oceanic Mariana forearc and backarc sediments. Japan forearc sediments average 10 QFL%Q, 0.82 P/F, 2 Framework%Mica, 74 LmLvLst%Lv, and 19 LmLvLst%Lst. In contrast, the Mariana forearc and backarc sediments average 0 QFL%Q, 1.00 P/F, 0 Framework%Mica, 98 LmLvLst%Lv, and 1 LmLvLst%Lst. Sediment compositions in the Japan region are variable. The Honshu forearc sediments average 5 QFL%Q, 0.94 P/F, 1 Framework%Mica, 82 LmLvLst%Lv, and 15 LmLvLst%Lst. The Yamato Basin sediments (DSDP Site 299) average 13 QFL%Q, 0.70 P/F, 3 Framework%Mica, 78 LmLvLst%Lv, and 14 LmLvLst%Lst. The Japan Basin sediments (DSDP Site 301) average 24 QFL%Q, 0.54 P/F, 9 Framework%Mica, 58 LmLvLst%Lv, and 21 LmLvLst%Lst. P/F and Framework%Mica are higher in the Yamato Basin sediments than in the forearc sediments due to an increase in modal potassium content of volcanic rocks from east to west, on the island of Honshu. Site 301 possesses a higher QFL%Q and LmLvLst%Lst, and lower LmLvLst%Lv than Site 299 because it receives sediment from the Asian mainland as well as the island of Honshu. DSDP Site 293 sediments, in the Mariana region, average 0.97 P/F, 1 Framework%Mica, 13 LmLvLst%Lm and 83 LmLvLst%Lv, due to their proximity to the island of Luzon. The remaining Mariana forearc and backarc sediments show a uniform composition.

Grain size distribution and percentiles of the sand component from sediments obtained in the southern Great Belt, Baltic Sea

Im Sedimentationsraum der südwestlichen Ostsee verdient der nordöstliche Teil der Kieler Bucht besonderes Interesse. Dort öffnet sich die wichtigste Verbindung zwischen Ostsee und Nordsee. Von den Austauschvorgängen, durch welche diese Meeresräume aufeinander Einfluß nehmen, ist gerade jenes Gebiet entscheidend betroffen. Die Beobachtung der Dynamik des Austausches, die Beobachtung der Transportlast, welche von den Wassermassen bewegt wird, und schließlich auch die Beobachtung der Beziehungen, welche sich zwischen dem Zusammentreffen von Wassermassen unterschiedlicher physikalischer Eigenschaften und der Sedimentbildung ergeben, läßt deshalb vor allem dort wesentliche Hinweise zum Verständnis der Sedimentationsvorgänge in der südlichen Ostsee erhoffen. In der vorliegenden Arbeit wurden an 49 Durchschnittsproben die Korngrößenverteilungen und Schwermineralgehalte von Sedimenten aus dem Südausgang des Großen Beltes untersucht. 1. Es wurden sechs in sich morphologisch etwa gleichwertige Gebiete ausgegliedert, die jeweils durch Sedimente mit ähnlichen Korngrößenverteilungen ausgezeichnet sind. Nach Lage, Typ und genetischer Ausdeutbarkeit fügen sich diese Gebiete dem von O. PRATJE (1939, 1948) gegebenen Modell der Sedimentationszonen gut ein. 2. Innerhalb dieser Gebiete ergibt sich für Sande in mehr als 20 m Wassertiefe südwärts gerichteter Transport. Oberhalb dieser Tiefe läßt sich stellenweise nordwärts gerichteter Transport nachweisen. 3. Der Schwermineralgehalt der Sedimente bleibt immer unter zwei Prozent. Die höchsten Anteile (1,7 bzw. 1,9%) werden in den Sedimenten der Tiefen Rinne und der ufernahen Bereiche des Großen Beltes angetroffen. 4. Die Korngrößenverteilungen der Sedimente werden nach der Lage der Modi in bis zu drei (Kies-, Sand-, Silt-) Komponenten zerlegt. Die Beteiligung der Silt-Komponente wird entscheidend von der Salzgehaltssprungschicht beeinflußt. 5. Es bestehen offensichtlich Zusammenhänge zwischen der Schlicksedimentation und der Salzgehaltsschichtung auch in der weiteren südlichen Ostsee.

Grain-size distribution, carbon and calcium carbonate at DSDP Leg 63 Holes

Sand-silt-clay distribution was determined at Scripps on samples collected at the time the cores were split and described. The sediment classification used here is that of Shepard (1954); sand, silt, and clay boundaries are determined on the basis of the Wentworth (1922) scale. Thus the sand, silt, and clay fractions are composed of particles whose diameters range from 2000 to 62.5 µm, 62.5 to 3.91 µm, and less than 3.91 µm, respectively. This classification is applied regardless of sediment type and origin.

Grain-size distribution and Folk's statistics at DSDP Leg 64 Holes

Grain size of 139 unconsolidated sediment samples from seven DSDP sites in the Guaymas Basin and the southeastern tip of the Baja California Peninsula was determined by sieve and pipette techniques. Shepard (1954) classification and Inman (1952) parameters correlation were used for all samples. Sediment texture ranged from sand to silty clay. On the basis of grain-size parameter, the sediments can be divided into three broad groups: (1) very fine sands and coarse silts; (2) medium- to very fine silts; and (3) clays and coarse silts.

Grain-size, carbon and calcium carbonate at DSDP Leg 77 Holes

Sand-silt-clay distribution was determined on 10-cm**3 sediment samples collected at the time the cores were split and described.

Grain size analyses, Ca/Ti and other selected elemental ratios from XRF core scanning of sediment cores from the Apulian Margin

An extensive, high-resolution, sedimentological-geochemical survey was done using geo-acoustics, XRF-core scans, ICP-AES, AMS 14C-dating and grain size analyses of sediments in 11 cores from the Gulf of Taranto, the southern Adriatic Sea, and the central Ionian Sea spanning the last 16 cal. ka BP. Comparable results were obtained for cores from the Gallipoli Shelf (eastern Gulf of Taranto), and the southern Adriatic Sea suggesting that the dominant provenance of Gallipoli Shelf sediments is from the western Adriatic mud belt. The 210Pb and 14C-dated high-accumulation-rate sediments permit a detailed reconstruction of climate variability over the last 16 cal. ka BP. Although, the Glacial-Interglacial transition is generally dry and stable these conditions are interrupted by two phases of increased detrital input during the Bølling-Allerød and the late Younger Dryas. The event during the Younger Dryas period is characterized by increased sediment inputs from southern Italian sources. This suggests that run-off was higher in southern- compared to northern Italy. At approximately ~ 7 cal. ka BP, increased detrital input from the Adriatic mud belt, related to sea level rise and the onset of deep water formation in the Adriatic Sea, is observed and is coincident with the end of sapropel S1 formation in the southern Adriatic Sea. During the mid-to-late Holocene we observed millennial-scale events of increased detrital input, e.g. during the Roman Humid Period, and of decreased detrital input, e.g., Medieval Warm Period. These dry/wet spells are consistent with variability in the North Atlantic Oscillation (NAO). A negative state of the NAO and thus a more advanced penetration of the westerlies into the central Mediterranean, that result in wet conditions in the research area concord with events of high detrital input e.g., during the Roman Humid Period. In contrast, a positive state of the NAO, resulting in dry conditions in the Mediterranean, dominated during events of rapid climate change such as the Medieval Warm Period and the Bronze Age.