Mn/Ca and Fe/Ca systematics in benthic foraminifera from the Peruvian OMZ

In this study we present an initial dataset of Mn/Ca and Fe/Ca ratios in tests of benthic foraminifera from the Peruvian oxygen minimum zone (OMZ) determined with SIMS. These results are a contribution to a better understanding of the proxy potential of these elemental ratios for ambient redox conditions. Foraminiferal tests are often contaminated by diagenetic coatings, like Mn rich carbonate- or Fe and Mn rich (oxyhydr)oxide coatings. Thus, it is substantial to assure that the cleaning protocols are efficient or that spots chosen for microanalyses are free of contaminants. Prior to the determination of the element/Ca ratios, the distributions of several elements (Ca, Mn, Fe, Mg, Ba, Al, Si, P and S) in tests of the shallow infaunal species Uvigerina peregrina and Bolivina spissa were mapped with an electron microprobe (EMP). To visualize the effects of cleaning protocols uncleaned and cleaned specimens were compared. The cleaning protocol included an oxidative cleaning step. An Fe rich phase was found on the inner test surface of uncleaned U. peregrina specimens. This phase was also enriched in Al, Si, P and S. A similar Fe rich phase was found at the inner test surface of B. spissa. Specimens of both species treated with oxidative cleaning show the absence of this phase. Neither in B. spissa nor in U. peregrina were any hints found for diagenetic (oxyhydr)oxide or carbonate coatings. Mn/Ca and Fe/Ca ratios of single specimens of B. spissa from different locations have been determined by secondary ion mass spectrometry (SIMS). Bulk analyses using solution ICP-MS of several samples were compared to the SIMS data. The difference between SIMS analyses and ICP-MS bulk analyses from the same sampling sites was 14.0-134.8 µmol mol-1 for the Fe/Ca and 1.68(±0.41) µmol mol-1 for the Mn/Ca ratios. This is in the same order of magnitude as the variability inside single specimens determined with SIMS at these sampling sites (1sigma[Mn/Ca] = 0.35-2.07 µmol mol-1; 1sigma[Fe/Ca] = 93.9-188.4 µmol mol-1). The Mn/Ca ratios in the calcite were generally relatively low (2.21-9.93 µmol mol-1) but in the same magnitude and proportional to the surrounding pore waters (1.37-6.67 µmol mol-1). However, the Fe/Ca ratios in B. spissa show a negative correlation to the concentrations in the surrounding pore waters. Lowest foraminiferal Fe/Ca ratios (87.0-101.0 µmol mol-1) were found at 465 m water depth, a location with a strong sharp Fe peak in the pore water next to the sediment surface and respectively, high Fe concentrations in the surrounding pore waters. Previous studies found no living specimens of B. spissa at this location. All these facts hint that the analysed specimens already were dead before the Fe flux started and the sampling site just recently turned anoxic due to fluctuations of the lower boundary of the OMZ near the sampling site (465 m water depth). Summarized Mn/Ca and Fe/Ca ratios are potential proxies for redox conditions, if cleaning protocols are carefully applied. The data presented here may be rated as base for the still pending detailed calibration.

(Table 1) Geochemistry of surface sediment samples from the Chilean margin

Biogenic barium in marine sediments has been suggested to be a reliable proxy of export productivity from the surface ocean and algorithms have been developed to link these properties. However, problems arise when the proposed algorithms are applied to predominantly terrigenous sediments. A major source of error is incorrect estimates of the terrigenous Ba/Al ratio in normative calculations of the amount of biogenic barium in the sediment. Compared to an often used "global average" Ba/Al ratio, much better results can be obtained by estimating the terrigenous Ba/Al ratio from exponential regression of the Ba/Al ratios of surface sediments obtained from continental slope transects. This method has been applied to surface sediments from the Chilean continental slope. The calculated regional terrigenous Ba/Al ratios could be verified with purely terrigenous samples from Chilean rivers. The resulting accumulation rates of biogenic barium on the Chilean continental slope reliably reproduce the regional pattern of primary productivity in the southern Peru-Chile Current, indicating the potential of biogenic barium as a useful (paleo)productivity proxy.

Geochemistry of surface sediment samples from the South Atlantic Ocean

The aim of the present study is an evaluation of the applicability of biogenic barium as a proxy for productivity. For this purpose, 190 surface sediment samples from the South Atlantic Ocean were analysed for their barium and aluminium concentrations. Biogenic barium is estimated by subtracting the calculated terrigenous barium (obtained from the terrigenous Ba/Al ratio and the amount of Al in the sample) from the total Ba content in the sample. Based on the accumulation rates of biogenic barium, export production is estimated using three different algorithms proposed by [Paleoceanography 7 (1992) 163, doi:10.1029/92PA00181; Global Biogeochem. Cycles 9 (1995) 289, doi:10.1029/95GB00021; Geomar. Report 38 (1995) 105]. Primary productivity was calculated from these different export productions and compared with measurements of recent primary productivity in the overlying surface waters. Only the primary productions calculated on the basis of the algorithm of [Paleoceanography 7 (1992) 163, doi:10.1029/92PA00181] yield productivity values comparable to those existing in ocean surface waters. This study further reveals that it is not sufficient to use a constant, generally applicable organic carbon/biogenic barium ratio, as is postulated by [Global Biogeochem. Cycles 9 (1995) 289, doi:10.1029/95GB00021]. This ratio has to be assessed regionally. For the sediments of the Cape Basin in the eastern South Atlantic Ocean, a new algorithm is developed which gives plausible primary productivities for the overlying surface waters.

Geochemistry and stable isotope record of black shales and inoceramids from the Demerara Rise

The bulk rock geochemistry and inoceramid isotopic composition from Cenomanian to Santonian, finely laminated, organic-rich black shales, recovered during Ocean Drilling Program Leg 207 on Demerara Rise (western tropical North Atlantic), suggest persistent anoxic (free H2S) conditions within the sediments and short-term variations within a narrow range of anoxic to episodically dysoxic bottom waters over a ~15 Ma time interval. In addition to being organic-rich, the 50-90 m thick sections examined exhibit substantial bulk rock enrichments of Si, P, Ba, Cu, Mo, Ni, and Zn relative to World Average Shale. These observations point to high organic burial fluxes, likely driven by high primary production rates, which led to the establishment of intensely sulfidic pore waters and possibly bottom waters, as well as to the enrichments of Cr, Mo, U, and V in the sediments. At the same time, the irregular presence of benthic inoceramids and foraminifera in this facies demonstrates that the benthic environment could not have been continuously anoxic. The d13C and d15N values of the inoceramid shell organics provide no evidence of chemosymbiosis and are consistent with pelagic rain as being a significant food source. Demerara Rise inoceramids also exhibit well-defined, regularly spaced growth lines that are tracked by d13C and d18O variations in shell carbonate that cannot be simply explained by diagenesis. Instead, productivity variations in surface waters may have paced the growth of the shells during brief oxygenation events suitable for benthic inoceramid settlement. These inferences imply tight benthopelagic coupling and more dynamic benthic conditions than generally portrayed during black shale deposition. By invoking different temporal scales for geochemical and paleontological data, this study resolves recent contradictory conclusions (e.g., sulfidic sedimentary conditions versus dysoxic to suboxic benthic waters) drawn from studies of either sediment geochemistry or fossil distributions alone on Demerara Rise. This variability may be relevant for discussions of black shales in general.

Geochemical composition of ODP Site 210-1276 shales

During Ocean Drilling Program Leg 210, a greatly expanded sedimentary sequence of continuous Cretaceous black shales was recovered at Site 1276. This section corresponds to the Hatteras Formation, which has been documented widely in the North Atlantic Ocean. The cored sequence extends from the lowermost Albian, or possibly uppermost Aptian, to the Cenomanian/Turonian boundary and is characterized by numerous gravity-flow deposits and sporadic, finely laminated black shales. The sequence also includes several sedimentary intervals with high total organic carbon (TOC) contents, in several instances of probable marine origin that may record oceanic anoxic events (OAE). These layers might correspond to the Cenomanian-Turonian OAE 2; the mid-Cenomanian event; and OAE 1b, 1c, and 1d in the Albian. In addition, another interval with geochemical characteristics similar to OAE-type layers was recognized in the Albian, although it does not correspond to any of the known OAEs. This study investigates the origin of the organic matter contained within these black shale intervals using TOC and CaCO3 contents, Corg/Ntot ratios, organic carbon and nitrogen isotopes, trace metal composition, and rock-eval analyses. Most of these black shale intervals, especially OAE 2 and 1b, are characterized by low 15N values (<0) commonly observed in mid-Cretaceous black shales, which seem to reflect the presence of an altered nitrogen cycle with rates of nitrogen fixation significantly higher than in the modern ocean.

Geochemical analysis of surface sediments from the ocean floor and from sea ice in the northern Atlantic and Arctic Oceans

Barium in marine terrigenous surface sediments of the European Nordic Seas is analysed to evaluate its potential as palaeoproductivity proxy. Biogenic Ba is calculated from Ba and Al data using a conventional approach. For the determination of appropriate detrital Ba/Al ratios a compilation of Ba and Al analyses in rocks and soils of the catchments surrounding the Nordic Seas is presented. The resulting average detrital Ba/Al ratio of 0.0070 is similar to global crustal average values. In the southern Nordic Seas the high input of basaltic material with a low Ba/Al ratio is evident from high values of magnetic susceptibility and low Al/Ti ratios. Most of the Ba in the marine surface sediments is of terrigenous and not of biogenic origin. Variability in the lithogenic composition has been considered by the application of regionally varying Ba/Al ratios. The biogenic Ba values are comparable with those observed in the central Arctic Ocean, they are lower than in other oceanic regions. Biogenic Ba values are correlated with other productivity proxies and with oceanographic data for a validation of the applicability in paleoceanography. In the Iceland Sea and partly in the marginal sea-ice zone of the Greenland Sea elevated values of biogenic Ba indicate seasonal phytoplankton blooms. In both areas paleoproductivities may be reconstructed based on Ba and Al data of sediment cores.

Mineralogy, geochemistry and elemental ratios of ODP Core 171B-1049C-8X

Inorganic geochemistry and mineralogy of Core 171B-1049C-8X, containing a Cretaceous/Tertiary boundary section, was investigated by X-ray fluorescence (XRF) and X-ray diffraction (XRD). The ages of samples analyzed stretched from the latest Maastrichtian into the Danian. XRD measurements were made using the peak height method. A reduction in low-magnesium calcite and an increase in quartz were found above the spherule layer. Substantial amounts of dolomite were noted just above the spherule layer. XRF analyses were performed using the RHSMALL program to measure the abundance of major and minor elements. Replicate analyses for each technique were performed to assess the precision of the results. The section above the spherule bed was found to be characterized by peaks in many elements, including Si, Al, Fe, and Mg, as well as the following elemental ratios: Fe/Al, Ni/Al, Zr/Rb, and Rb/Sr'. Above the spherule bed, there were significant reductions in Ca, Sr/Ca, Ti/Al, K/Al, Rb/Al, Cr/Al, Ba/Al, biogenic Ba, and excess P.

10Be and barium concentrations of sediment core GeoB1008-3

Particle reactive elements are scavenged to a higher degree at ocean margins than in the open ocean due to higher fluxes of biogenic and terrigenous particles. In order to determine the influence of these processes on the depositional fluxes of 10Be and barium we have performed high-resolution measurements on sediment core GeoB1008-3 from the Congo Fan. Because the core is dominated by terrigenous matter supplied by the Congo River, it has a high average mass accumulation rate of 6.5 cm/kyr. Biogenic 10Be and Ba concentrations were calculated from total concentrations by subtracting the terrigenous components of10Be and Ba, which are assumed to be proportional to the flux of Al2O3. The mean Ba/Al weight ratio of the terrigenous component was determined to be 0.0045. The unusualy high terrigenous 10Be concentrations of 9.1 * 10**9 atoms/g Al2O3 are either due to input of particles with high10Be content by the Congo River or due to scavenging of oceanic 10Be by riverine particles. The maxima of biogenic 10Be and Ba concentrations coincide with maxima of the paleoproductivity rates. Time series analysis of the 10Be and of Ba concentration profiles reveals a strong dominance of the precessional period of 24 kyr, which also controls the rates of paleoproductivity in this core. During the maxima of productivity the flux of biogenic Ba is enhanced to a larger extent than that of biogenic 10Be. Applying a model for coastal scavenging, we ascribe the observed higher sensitivity of Ba to biogenic particle fluxes to the fact that the ocean residence time of Ba is approximately 10 times longer than that of 10Be.

Geochemistry of sediment cores GeoB4901-3 and GeoB4901-8 from the southern flank of the Niger Fan

Time series of terrigenous source elements (Al, K, Ti, Zr) from core GeoB4901-8 recovered from the deep-sea fan of the Niger River record variations in riverine sediment discharge over the past 245,000 yr. Although the flux rates of all the elements depend on physical erosion, which is mainly controlled by the extent of vegetation coverage in central Africa, element/Al ratios reflect conditions for chemical weathering in the river basin. Maximum sediment input to the ocean occurs during cold and arid periods, when precipitation intensity and associated freshwater runoff are reduced. High carbonate contents during the same periods indicate that the sediment supply has a positive effect on river-induced marine productivity. In general, variations in the terrestrial signals contain a strong precessional component in tune with changes in low-latitude solar radiation. However, the terrestrial signal lags the insolation signal by several thousand years. K/Al, Ti/Al, and Zr/Al records reveal that African monsoonal precipitation depends on high-latitude forcing. We attribute the shift between insolation cycle and river discharge to the frequently reported nonlinear response of African climate to primary orbital configurations, which may be caused by a complex interaction of the secondary control parameters, such as surface albedo and/or thermohaline circulation.