(Table 1) Abundance of shocked quartz in K/T boundary sediments from DSDP Site 91-596

Sediments from the Cretaceous/Tertiary (K/T) boundary at Deep Sea Drilling Project Site 596 record accumulation of pelagic clays at about lat 45°S,in the center of the ancestral South Pacific. The K/T boundary in this region is characterized by oxidized, thoroughly bioturbated sediments containing large amounts of Ir and relict high-pressure and high-temperature mineral phases. The net Ir fluence (320 ng/cm**2) is among the largest on Earth, and the number of shocked quartz grains >30 µm in size (~1800/cm**2) exceeds that in all localities outside of North America.

(Table 1) Mineralogy of DSDP Leg 65 sediments

During Leg 65, four sites were drilled near the mouth of the Gulf of California where high sedimentation rates made it possible to sample young oceanic crust near the ridge crest. The oldest sediments cored were upper Pliocene siltstones (Site 483); the samples at the other sites (482, 484, and 485) were all Quaternary in age. A series of 80 sediment samples, most of them hemipelagic clays, were examined by semiquantitative X-ray diffraction and Carbonate Bomb techniques to determine their mineralogy and carbonate contents. The results of this study may be used to determine their provenance and diagenesis.

Mössbauer study at DSDP Hole 95-612

57Fe Mössbauer spectra of 15 oceanic sediment samples collected from Site 612 (Deep Sea Drilling Project Leg 95) were recorded. These spectra showed that most of the iron in the sediments was present as high-spin, paramagnetic Fe2+ and Fe3+. The ferrous iron was mainly distributed in terrigenous clays and biogenic carbonates. The variation of the Mössbauer parameters for Fe2+ with sub-bottom depth suggests that the main Fe2+-bearing component changed with geologic time. The amount of iron in each iron-bearing phase as estimated from the corresponding peak areas in the spectra also changed with depth. These variations in the Mössbauer parameters and peak areas are correlated with lithologic changes in the sediment column.

(Table 2) Geochemistry at DSDP Holes 62-464 and 62-465A

Igneous rocks were recovered from three sites on Hess Rise during Deep Sea Drilling Project Leg 62: altered basalt at Site 464, at the northern end of Hess Rise; and altered trachyte from Site 465, and rounded basalt pebbles in upper Albian to middle Miocene sediments from Site 466, both at the southern end of Hess Rise. Major-, minor-, and trace-element data for basalt from Hole 464 are consistent with these rocks being transitional tholeiites that have undergone low-temperature alteration by reaction with sea water. Trachyte from Hole 465A exhibits as many as three generations of plagioclase along with potash feldspar that are flow aligned in groundmasses alterted to smectites and random mixed-layer clays. Textural evidence indicates that these rocks were eruped subaerially. Chemical data show a range of values when plotted on two- and three-component variation diagrams. The observed variations may result in part from differentiation, but they also reflect the high degree of alteration. Several oxides and elements show strong correlation with H2O+: K2O, SiO2, Rb and Lu decrease and MgO increases with increasing H2O+. These trends, except for that of Lu, are consistent with experimentally determined changes in chemistry that accompany alteration. The trend for Lu has not been previously reported; it may result from a more-intense alteration of the HREE-rich mafic minerals than of the LREE-rich feldspars. Despite their alteration, the trachytes compare favorably with alkalic differentiates from oceanic islands. We interpret Hess Rise as a volcanic platform formed by eruption of off-ridge volcanic rocks onto MORB oceanic crust during the Aptian and Albian stages, after the basement had migrated away from the spreading center. By analogy with present oceanic islands, we propose that early tholeiitic basalts were followed by alkalic basalts and their differentiation products (trachytes), producing a volcanic archipelago of islands and seamounts. Subsequent tectonism and subsidence led to the present state of Hess Rise.

(Table 2) Uranium and thorium isotopic composition, activity ratios and ages of bivalvia shells in sediment core GIK14350, northern Germany

A new chemical procedure for cleaning marine carbonates was applied to remove detritus as well as metaloxide contaminations of marine shells from Eemian deposits and adjoining succession of a sediment core from Dagebüll, Schleswig- Holstein. Hence, one can significantly reduce the contamination with detrital uranium and thorium. Thermal ionisation mass spectrometry was applied to determine the uranium and thorium activities used for 230Th/U dating of these shells. At least ten samples of marine bivalves of five different core sections were analysed. Samples located below a five meter thick clay layer at 19-24 m yielded an average age of 132±18 ka. Shells located above the clays at 15-20 m depth were strongly influenced by percolating groundwaters of an open system. Therefore, a reliable dating of these samples was not possible.

(Table 1) Clay minerals at DSDP Hole 93-603B

Cretaceous sediments encountered in Hole 603B contain a 17 Å smectite as the principal clay mineral, with lesser amounts of illite, kaolinite, and randomly interstratified illite/smectite (I/S). No evidence of smectite to I/S transformation with depth is seen in the interval between 1040 and 1570 m below the sediment surface. Although the presence of some volcanic ash suggests a volcanic origin for the smectite, the nature of associated organic matter together with prevailing sedimentological models for Cretaceous sedimentation on the lower continental rise argue more strongly for a dominantly terrestrial origin for the clays.

Eolian mass-accumulation rates and grain size at DSDP Sites 86-576 and 86-578

The mass-accumulation rate and grain size of the total eolian component of North Pacific pelagic clays at Deep Sea Drilling Project Sites 576 and 578 have been used to evaluate changes in eolian sedimentation and the intensity of atmospheric circulation that have occurred during the past 70 m.y. Eolian deposition, an indicator of source area aridity, was low in the Paleocene, Eocene, and Oligocene, apparently reflecting the humid environments of that time as well as the lack of glacial erosion products. A general increase in eoiian accumulation in the Miocene apparently reflects the relative increase in global aridity during the latter part of the Cenozoic. A dramatic increase in eolian accumulation rates in the Pliocene reflects the increased aridity and availability of glacial erosion products associated with Northern Hemisphere glaciation 2.5 m.y. ago. Eolian grain size, an indicator of wind intensity, suggests that Late Cretaceous wind strength was comparable to present-day wind strength. A sharp decrease in eolian grain size across the Paleocene/Eocene boundary is not readily interpreted, but may indicate a significant reduction in the intensity of atmospheric circulation at that time. Fine eolian grain size and low accumulation rates in the Eocene and early Oligocene are in agreement with low early Tertiary thermal gradients and less vigorous atmospheric circulation. Large increases in grain size during the Oligocene, mid-to-late Miocene, and Pliocene appear to be a response to steepening thermal gradients resulting from increasing polar isolation.

Grain sizes, carbon content and clay minerals of sediments obtained from north Germany and the Baltic Sea

Clay mineralogy and geotechnical properties of Tarras clay, basin clays and tills from some parts of Schleswig-Holstein: Tarras clay of lower Eocene age, Quaternary till containing various admixtures of Tarras clay as well as basin clay and varve-clay from Schleswig-Holstein were investigated. Grain size distribution and soil mechanic characteristics were determined, which indicated different geotechnical properties for each sediment type.

(Table T1) Abundance of silicoflagellates in sediments of ODP Hole 199-1219A

Silicoflagellates ranging from middle Eocene to middle Miocene in age are present in Ocean Drilling Program Hole 1219A. The hole was drilled 250.8 meters below seafloor of which an ~120 m section primarily composed of nannofossil ooze with variable radiolarian and clay content is early Miocene and Oligocene in age, and a 95-m section is Eocene radiolarian and zeolithic clays, radiolarian and diatom oozes, and nannofossil oozes and chalks. A total of 150 samples were studied at a sample interval of one per section. Diversity of silicoflagellates is moderate, and the preservation is good. Abundance is generally low, with many samples barren of silicoflagellates, but 31 species and subspecies were identified. One new species, Naviculopsis trigeminus, is described.

Calcareous nannofossil stratigraphy and key biohorizons of ODP Leg 173 sites

Six sites were drilled on the southern Iberia Abyssal Plain during Ocean Drilling Program (ODP) Leg 173. Three holes (1067A, 1068A, and 1069A) recovered Eocene sediments consisting of thinly bedded turbidite deposits with interbedded hemipelagic sediments (Bouma sequence Te) deposited near the calcite compensation depth. The hemipelagic sediments are barren of nannofossils, necessitating the use of the turbidite deposits to erect an Eocene biostratigraphy for these holes. Moderately preserved, diverse assemblages of nannofossils were recovered from silty clays (Bouma sequence Td) and poorly preserved, less diverse assemblages were recovered from sandy/silty clays (Bouma sequence Tc). Hole 1067A has a continuous record of sedimentation (Subzones CP9a-CP14a) and Holes 1068A and 1069A have similar continuous records (Subzones CP9a-CP12a), although all holes contain barren intervals. Holes 1067A, 1068A, 1069A, 900A (ODP Leg 149), and 398D (Deep Sea Drilling Project Leg 47B) display a similar increase in mass accumulation rates in the lowermost middle Eocene. A reliable Eocene biostratigraphy has been erected using nannofossil data from turbidite sequences, allowing for correlation between Iberia Abyssal Plain sites.

Agglutinated benthic foraminifera of the Upper Cretaceous

A reexamination of the agglutinated benthic foraminiferal microfaunas found in the Upper Cretaceous red and brown clays of DSDP Hole 603B and ODP Holes 640A and 641A allows us to refine the initial shipboard biostratigraphic interpretation and to propose a fourfold zonation that can be used with some precautions in the oceanic realm. By means of various calibrations, an attempt is also made to integrate this zonation in a worldwide chronostratigraphic framework. The resulting chronologic control permits us to discern large differences in the rhythm of red clay deposition on either side of the North Atlantic Ocean.

Geochemistry of marine sediments of the world's major subduction zones

This paper presents new major and trace-element data and Lu-Hf and Sm-Nd isotopic compositions for representative suites of marine sediment samples from 14 drill sites outboard of the world's major subduction zones. These suites and samples were chosen to represent the global range in lithology, Lu/Hf ratios, and sediment flux in subducting sediments worldwide. The data reported here represent the most comprehensive data set on subducting sediments and define the Hf-Nd isotopic variations that occur in oceanic sediments and constrain the processes that caused them. Using new marine sediment data presented here, in conjunction with published data, we derive a new Terrestrial Array given by the equation, epsilon-Hf = 1.55 * epsiolon-Nd + 1.21. This array was calculated using >3400 present-day Hf and Nd isotope values. The steeper slope and smaller y-intercept of this array, compared to the original expression (epsilon-Hf = 1.36 * epsilonNd + 2.89; Vervoort et al., 1999, doi:10.1016/S0012-821X(99)00047-3) reflects the use of present day values and the unradiogenic Hf of old continental samples included in the array. In order to examine the Hf-Nd isotopic variations in marine sediments, we have classified our samples into 5 groups based on lithology and major and trace-element geochemical compositions: turbidites, terrigenous clays, and volcaniclastic, hydrothermal and hydrogenetic sediments. Compositions along the Terrestrial Array are largely controlled by terrigenous material derived from the continents and delivered to the ocean basins via turbidites, volcaniclastic sediments, and volcanic inputs from magmatic arcs. Compositions below the Terrestrial Array derive from unradiogenic Hf in zircon-rich turbidites. The anomalous compositions above the Terrestrial Array largely reflect the decoupled behavior of Hf and Nd during continental weathering and delivery to the ocean. Both terrigenous and hydrogenetic clays possess anomalously radiogenic Hf, reflecting terrestrial sedimentary and weathering processes on the one hand and marine inheritance on the other. This probably occurs during complementary processes involving preferential retention of unradiogenic Hf on the continents in the form of zircon and release of radiogenic Hf from the breakdown of easily weathered, high Lu-Hf phases such as apatite.