(Table 1) Mineral phosphorus contents in bottom sediments and interstitial waters of the Southeast Atlantic

Concentrations of mineral phosphorus in interstitial waters from sediments of the Southeast Atlantic generally increases from the ocean bed to the continental slope and shelf. In diatomaceous oozes of the Southwest Africa shelf, phosphorus concentration in fresh interstitial waters reaches 2.5 mg/l in absence of phosphorite concretions and 0.1-0.7 mg/l in their presence. After prolonged storage of samples concentration of dissolved mineral phosphorus sometimes increases up to 7-8 mg/l. The key factor regulating phosphorus content of solid and liquid phases of unaltered sediments are content and composition of organic matter.

Organic nitrogen and organic phosphorus concentrations bays of the White Sea

Concentrations of organic and mineral nitrogen and phosphorus in waters from different types of bays were determined during summer of 1987. Content of organic nitrogen in surface waters reached 80-97% of total; content of mineral phosphorus was 60-100%. Concentrations of N_org and P_org in deep waters decreased to 70 and 40%, respectively. Distribution of organic matter in the bays was controlled by river run-off.

Phosphorus dynamics in waters of the Pacific Ocean

Tagged phosphorus was used to measure principal indices of mineral phosphorus variations in the euphotic zone of the East Pacific, i.e. total rate of uptake of phosphate phosphorus by microplankton (A_t), fraction consumed by phytoplankton (A_p/A_t), and turnover time (T). A_t reached its greatest values (150-280 ng/l/hour) in the upwelling zone of the Peru traverse, where development of phytoplankton was induced by upwelling. In other areas of this traverse values were 40-80 ng/l/hour in surface layers. In less productive waters on two other profiles (off Central America and California), values were lower, between 20 and 40 ng/l. On the vertical profile maxima of A_t were found at the upper boundary of the thermocline. Turnover time of PO4 phosphorus (T) in zones of phytoplankton abundance was very short, between 1.5 and 4 days. At most other stations it was 10-40 days, increasing to 100-200 days or longer at the lower boundary of the euphotic zone. In areas of phytoplankton abundance it accounted for 60-80% of total uptake of PO4 phosphorus. But in zones of elevated bacterial abundance, A_p/A_t fell to 20-40%. Data indicating lack of correlation between PO4 phosphorus and productivity are presented. It is emphasized that the above measures of PO4 phosphorus dynamics can be used for obtaining measures of functional condition and successional phase of marine plankton communities.

(Table 1) Composition of bottom sediments and pore waters from the West Africa shelf

Organic and mineral phosphorus (P_org and P_min) have been determined in pore waters of terrigenous, biogenous, as well as weakly phosphatic and phosphatic sediments from the shelf of the West Africa (in 30 samples). Concentrations of P_min in the pore waters have been examined in close relation to grain size and chemical composition (amounts of P and N_org) of solid phase of the sediments. It has been demonstrated that among sands and coarse silts, maximum concentrations of P_min (up to 1.7 mg/l) in the pore waters have been observed in weakly phosphatic and phosphatic sediments rich in organic matter of the highly productive shelf of the Southwest Africa. Concentrations of P_min in the pore waters are most clearly associated with contents of N_org in the solid phase of the sediments (correlation coefficient R = 0.71) and P_org in the pore waters (R = 0.78).

Activity of ETS enzymes and phosphatase in the Sea of Okhotsk and Kuril region in summer 1992 and 1993

An estimate of rate of transformation of organic matter and regeneration of nutrients (in particular phosphorus) was calculated for different regions of the Sea of Okhotsk. The rate was estimated by means of rate of complete oxidation of organic matter to CO2 and H2O catalyzed by enzymes of the electron transport system (ETS) and rate of hydrolytic splitting of phosphate from organic phosphorus compounds catalyzed by alkaline phosphatase. Organic matter destruction rate was at its maximum on the shelf of Kamchatka and Sakhalin, as well as in the layer of maximum oxygen gradients in deep waters. It was found that zones of intensive primary production were characterized by high rates of phosphorus regeneration, which provided for 80% of primary production when concentration of mineral phosphorus was low.

Geochemistry, isotopic ratios and mineral composition of samples from ODP Leg 163 sites

Thirty-five samples from the drill core of the three Leg 163 sites (Sites 988, 989, and 990) off the southeast coast of Greenland were analyzed for 27 major, minor, and trace elements by X-ray fluorescence (XRF) and for 25 trace elements, including 14 rare-earth elements (REEs), by an inductively coupled plasma source mass spectrometer (ICP/MS). Sr- and Nd-isotope data are reported for seven samples and oxygen-isotope data are reported for 19 plagioclase separates. In addition, a reconnaissance survey of the composition of the main mineral phases, plagioclase, pyroxene, and oxides was determined on an electron microprobe to provide the basic information required for petrogenetic modeling. Olivine pseudomorphs are present in many of the samples, but in no case was an olivine grain found that was fresh enough to give a reliable analysis. The chemical and isotopic data recorded here were determined to provide a comparison with the larger data sets acquired by the Edinburgh, Copenhagen, and Leicester laboratories from both Legs 152 and 163 drill cores. This will permit a detailed comparison of the North Atlantic flood basalt province as a whole with the better known Columbia River, Deccan, and Karoo continental flood basalt provinces, for which substantial chemical data sets are already available at Washington State University.

Mineral composition and major element oxides of gabbros from ODP Hole 179-1105A, southwest Indian Ridge

Hole 1105A penetrated 158 m of gabbros at a site offset 1.3 km east-northeast from Hole 735B on the Atlantis Bank near the Atlantis II Fracture Zone. A total of 118 m of dominantly medium- to coarse-grained intercalated Fe-Ti oxide gabbro and olivine gabbro was recovered from Hole 1105A that shows many petrographic features similar to those recovered from the upper part of Hole 735B. The main rock types are distinguished based on the constituent cumulus phases, with the most primitive gabbros consisting of olivine, plagioclase, and clinopyroxene. The inferred crystallization order is subsequently Fe-Ti oxides (ilmenite and titanomagnetite), followed by orthopyroxene, then apatite, and finally biotite. Orthopyroxene appears to replace olivine in a narrow middle interval. The magmatic evolution is likewise reflected in the mineral compositions. Plagioclase varies from An66 to An28. Olivine varies from Fo78 to Fo35. The gap in olivine crystallization occurs between Fo46 and Fo40 and coincides approximately with the appearance of orthopyroxene (~En50). The clinopyroxenes show large compositional variation in Mg/(Mg + Fe total) from 0.84 to 0.51. The nonquadrilateral cations of clinopyroxene similarly show large variations with Ti increasing for the olivine gabbros and decreasing for the Fe-Ti oxide gabbros with the decrease in Mg/(Mg + Fe total). The apatites are mainly flourapatites. The compositional variation in the gabbros is interpreted as a comagmatic suite resulting from fractional crystallization. Pyroxene geothermometry suggests equilibration temperatures from 1100°C and below. The coexisting Fe-Ti oxide minerals indicate subsolidus equilibration temperatures from 900°C for olivine gabbros to 700°C for the most evolved apatite-bearing gabbros. The cryptic variation in the olivine gabbros defines two or three lenses, 40 to 60 m thick, each characterized by a distinct convex zoning with a lower segment indicating upward reverse fractionation, a central maximum, and an upper segment showing normal fractionation. The Fe-Ti oxide gabbros show cryptic variations independent of the host olivine gabbros and reveal a systematic upward normal fractionation trend transgressing host olivine gabbro boundaries. Forward fractional crystallization modeling, using a likely parental magma composition from the Atlantis II Fracture Zone (MgO = 7.2 wt%; Mg/[Mg + Fe2+] = 0.62), closely matches the compositions of coexisting olivine, plagioclase, and clinopyroxene. This modeling suggests cosaturation of olivine, plagioclase, and clinopyroxene from 1155°C and the addition of Fe-Ti oxides from 1100°C. The liquid line of descent initially shows increasing FeO with moderately increasing SiO2. After saturation of Fe-Ti oxides, the liquid strongly decreases in FeO and TiO2 and increases in SiO2, reaching dacitic compositions at ~10% liquid remaining. The calculations indicate that formation of olivine gabbros can be accounted for by <65% fractionation and that only the residual 35% liquid was saturated in Fe-Ti oxides. The modeling of the solid fractionation products shows that both the olivine gabbro and the Fe-Ti oxide gabbros contain very small amounts of trapped liquid (<5%). The implications are that the gabbros represent crystal mush that originated in a recharging and tapping subaxial chamber. Compaction and upward melt migration in the crystal mush appear to have been terminated with relatively large amounts of interstitial liquid remaining in the upper parts of the cumulate mush. This termination may have been caused by tectonic disturbances, uplift, and associated withdrawal of magma into the subaxial dike and sill system. Prolonged compaction and cooling of the trapped melt in the mush formed small differentiated bodies and lenses by pressure release migration and crystallization along syntectonic channels. This resulted in differentiation products along lateral and vertical channelways in the host gabbro that vary from olivine gabbro, to Fe-Ti oxide gabbro, gabbronorite, and apatite gabbros and show large compositional variations independent of the host olivine gabbros.

Chemical and mineral compositions of bottom sediments from the East Pacific Rise near 13°N

During underwater photography and sampling of the rift valley bottom in the axial part of the East Pacific Rise, where water transparency is reduced due to hydrothermal input, ore manifestations have been found. The bottom is covered by them as by a jacket on both sides from the EPR axial zone. However, exposed pillow-lavas and clumpy blocks in rift ledges are covered by a thin metal-bearing film. It is supposed that sedimentation results mainly from hydrothermal input of dissolved chemical elements in seawater, their transformation on the geochemical barrier, and subsequent deposition as particulates. Contents of ore components in metalliferous sediments have been measured by atomic-absorption and X-ray radiometry methods. Sediment age has been determined as Middle Pleistocene - Holocene. Maximal hydrothermal activity was at the beginning of Early Holocene, about 10 Ka. A smoker has been found on the western slope of the rift valley.

Mineral chemistry of basalts from DSDP Holes 65-483 and 65-483B

During DSDP Leg 65, a series of holes was drilled into the oceanic basement across the mouth of the Gulf of California to study the composition of the crust and the nature of its construction at a young spreading center. In Holes 483 and 483B, two of the deepest basement holes drilled on this leg, the basement is characterized by an upper sequence of interlayered massive basalts and sediments underlain by a lower sequence of interlayered pillow and massive basalts. Electron microprobe analyses were performed on pyroxene, plagioclase, olivine, spinel, and glass from 14 representative samples of 10 of the 16 major lithologic units. These analyses along with petrographic results can be used to interpret the detailed crystallization history of the basalts. We believe from the results of this study that the basalts were formed by at least a three-stage cooling process, followed by eruption and formation of quench phases. Our data do not support magma mixing.

Chemical, isotope and mineral composition of hydrothermally altered upper oceanic crust drilled at ODP Site 129-801C

ODP Hole 801C penetrates >400 m into 170-Ma oceanic basement formed at a fast-spreading ridge. Most basalts are slightly (10-20%) recrystallized to saponite, calcite, minor celadonite and iron oxyhydroxides, and trace pyrite. Temperatures estimated from oxygen isotope data for secondary minerals are 5-100°C, increasing downward. At the earliest stage, dark celadonitic alteration halos formed along fractures and celadonite, and quartz and chalcedony formed in veins from low-temperature (<100°C) hydrothermal fluids. Iron oxyhydroxides subsequently formed in alteration halos along fractures where seawater circulated, and saponite and pyrite developed in the host rock and in zones of restricted seawater flow under more reducing conditions. Chemical changes include variably elevated K, Rb, Cs, and H2O; local increases in FeT, Ba, Th, and U; and local losses of Mg and Ni. Secondary carbonate veins have 87Sr/86Sr = 0.706337 - 0.707046, and a negative correlation with d18O results from seawater-basalt interaction. Carbonates could have formed at any time since the formation of Site 801 crust. Variable d13C values (-11.2? to 2.9?) reflect the incorporation of oxidized organic carbon from intercalated sediments and changes in the d13C of seawater over time. Compared to other oceanic basements, a major difference at Site 801 is the presence of two hydrothermal silica-iron deposits that formed from low-temperature hydrothermal fluids at the spreading axis. Basalts associated with these horizons are intensely altered (60-100%) to phyllosilicates, calcite, K-feldspar, and titanite; and exhibit large increases in K, Rb, Cs, Ba, H2O, and CO2, and losses of FeT, Mn, Mg, Ca, Na, and Sr. These effects may be common in crust formed at fast-spreading rates, but are not ubiquitous. A second important difference is that the abundance of brown oxidation halos along fractures at Site 801 is an order of magnitude less than at some other sites (2% vs. 20-30%). Relatively smooth basement topography (<100 m) and high sedimentation rate (8 m/Ma) probably restricted the access of oxygenated seawater. Basement lithostratigraphy and early low-temperature hydrothermal alteration and mineral precipitation in fractures at the spreading axis controlled permeability and limited later flow of oxygenated seawater to restricted depth intervals.