Design and Realization of an Energy Harvester Using Pulsating Arterial Pressure

Most medical implants run on batteries, which require costly and tedious replacement or recharging. It is believed that micro-generators utilizing intracorporeal energy could solve these problems. However, such generators do not, at this time, meet the energy requirements of medical implants.This paper highlights some essential aspects of designing and implementing a power source that scavenges energy from arterial expansion and contraction to operate an implanted medical device. After evaluating various potentially viable transduction mechanisms, the fabricated prototype employs an electromagnetic transduction mechanism. The artery is inserted into a laboratory-fabricated flexible coil which is permitted to freely deform in a magnetic field. This work also investigates the effects of the arterial wall's material properties on energy harvesting potential. For that purpose, two types of arteries (Penrose X-ray tube, which behave elastically, and an artery of a Göttinger minipig, which behaves viscoelastically) were tested. No noticeable difference could be observed between these two cases. For the pig artery, average harvestable power was 42 nW. Moreover, peak power was 2.38 μW. Both values are higher than those of the current state of the art (6 nW/16 nW). A theoretical modelling of the prototype was developed and compared to the experimental results.

Towards Batteryless Cardiac Implantable Electronic Devices – The Swiss Way

Energy harvesting devices are widely discussed as an alternative power source for todays active implantable medical devices. Repeated battery replacement procedures can be avoided by extending the implants life span, which is the goal of energy harvesting concepts. This reduces the risk of complications for the patient and may even reduce device size. The continuous and powerful contractions of a human heart ideally qualify as a battery substitute. In particular, devices in close proximity to the heart such as pacemakers, defibrillators or bio signal (ECG) recorders would benefit from this alternative energy source. The clockwork of an automatic wristwatch was used to transform the hearts kinetic energy into electrical energy. In order to qualify as a continuous energy supply for the consuming device, the mechanism needs to demonstrate its harvesting capability under various conditions. Several in-vivo recorded heart motions were used as input of a mathematical model to optimize the clockworks original conversion efficiency with respect to myocardial contractions. The resulting design was implemented and tested during in-vitro and in-vivo experiments, which demonstrated the superior sensitivity of the new design for all tested heart motions.

Sex as a source of power? Backlash against self-sexualizing women

Although women are thought to possess sexual power, they risk social and economic penalties (i.e., backlash; Rudman, 1998) when they self-sexualize (i.e., assert their power; Cahoon & Edmonds, 1989; Glick, Larsen, Johnson, & Branstiter, 2005). Why? Drawing on the status incongruity hypothesis (SIH), which predicts backlash against powerful women because they challenge the gender hierarchy, we expected prejudice against self-sexualizing women to be explained by a dominance penalty rather than a communality deficit (Rudman, Moss-Racusin, Phelan, & Nauts, 2012). Two experiments supported this hypothesis, and Experiment 3 further showed that the dominance penalty was explained by ascribing power motives to self-sexualized women. These findings extend the SIH’s utility to the domain of self-sexualization and illuminate the scope of people’s discomfort with female power. Implications for the advancement of gender equality are discussed.

A Passive WiFi Source Localization System based on Fine-grained Power-based Trilateration

Indoor localization systems become more interesting for researchers because of the attractiveness of business cases in various application fields. A WiFi-based passive localization system can provide user location information to third-party providers of positioning services. However, indoor localization techniques are prone to multipath and Non-Line Of Sight (NLOS) propagation, which lead to significant performance degradation. To overcome these problems, we provide a passive localization system for WiFi targets with several improved algorithms for localization. Through Software Defined Radio (SDR) techniques, we extract Channel Impulse Response (CIR) information at the physical layer. CIR is later adopted to mitigate the multipath fading problem. We propose to use a Nonlinear Regression (NLR) method to relate the filtered power information to propagation distances, which significantly improves the ranging accuracy compared to the commonly used log-distance path loss model. To mitigate the influence of ranging errors, a new trilateration algorithm is designed as well by combining Weighted Centroid and Constrained Weighted Least Square (WC-CWLS) algorithms. Experiment results show that our algorithm is robust against ranging errors and outperforms the linear least square algorithm and weighted centroid algorithm.

A Smart TCP Acknowledgment Approach for Multihop Wireless Networks

Reliable data transfer is one of the most difficult tasks to be accomplished in multihop wireless networks. Traditional transport protocols like TCP face severe performance degradation over multihop networks given the noisy nature of wireless media as well as unstable connectivity conditions in place. The success of TCP in wired networks motivates its extension to wireless networks. A crucial challenge faced by TCP over these networks is how to operate smoothly with the 802.11 wireless MAC protocol which also implements a retransmission mechanism at link level in addition to short RTS/CTS control frames for avoiding collisions. These features render TCP acknowledgments (ACK) transmission quite costly. Data and ACK packets cause similar medium access overheads despite the much smaller size of the ACKs. In this paper, we further evaluate our dynamic adaptive strategy for reducing ACK-induced overhead and consequent collisions. Our approach resembles the sender side's congestion control. The receiver is self-adaptive by delaying more ACKs under nonconstrained channels and less otherwise. This improves not only throughput but also power consumption. Simulation evaluations exhibit significant improvement in several scenarios

Frequency-domain source localization shows state-dependent diazepam effects in 47-channel EEG

The topic of this study was to evaluate state-dependent effects of diazepam on the frequency characteristics of 47-channel spontaneous EEG maps. A novel method, the FFT-Dipole-Approximation (Lehmann and Michel, 1990), was used to study effects on the strength and the topography of the maps in the different frequency bands. Map topography was characterized by the 3-dimensional location of the equivalent dipole source and map strength was defined as the spatial standard deviation (the Global Field Power) of the maps of each frequency point. The Global Field Power can be considered as a measure of the amount of energy produced by the system, while the source location gives an estimate of the center of gravity of all sources in the brain that were active at a certain frequency. State-dependency was studied by evaluating the drug effects before and after a continuous performance task of 25 min duration. Clear interactions between drug (diazepam vs. placebo) and time after drug intake (before and after the task) were found, especially in the inferior-superior location of the dipole sources. It supports the hypothesis that diazepam, like other drugs, has different effects on brain functions depending on the momentary functional state of the brain. In addition to the drug effects, clearly different source locations and Global Field Power were found for the different frequency bands, replicating earlier reports (Michel et al., 1992).

Smell and taste of chewing gum affect frequency domain EEG source localizations

We investigated brain electric field signatures of subjective feelings after chewing regular gum or gum base without flavor. 19-channel eyes-closed EEG from 20 healthy males before and after 5 minutes of chewing the two gum types in random sequence was source modeled in the frequency domain using the FFT-Dipole-Approximation. 3-dimensional brain locations and strengths (Global Field Power, GFP) of the equivalent sources of five frequency bands were computed as changes from pre-chewing baseline. Gum types differed (ANOVA) in pre-post changes of source locations for the alpha-2 band (to anterior and right after regular gum, opposite after gum base) and beta-2 band (to anterior and inferior after regular gum, opposite after gum base), and of GFP for delta-theta, alpha-2 and beta-1 (regular gum: increase, gum base: decrease). Subjective feeling changed to more positive values after regular gum than gum base (ANOVA).—Thus, chewing gum with and without taste-smell activates different brain neuronal populations.

The Integration of Electricity from Renewable Energy Sources in the European Union Electricity Market – The case for “Smart Grids”

The power sector is to play a central role in a low carbon economy. In all the decarbonisation scenarios of the European Union renewable energy sources (RES) will be a crucial part of the solution. Current grids constitute however major bottlenecks for the future expansion of RES. Recognising the need for a modernisation of its grids, the European Union has called for the creation of a "smart supergrid" interconnecting European grids at the continental level and making them "intelligent" through the addition of information and communication technology (ICT). To implement its agenda the EU has taken a leading role in coordinating research efforts and creating a common legislative framework for the necessary modernisation of Europe’s grids. This paper intends to give both an overview and a critical appraisal of the measures taken so far by the European Union to "transform" the grids into the backbone of a decarbonised electricity system. It suggests that if competition is to play a significant role in the deployment of smart grids, the current regulatory paradigm will have to be fundamentally reassessed

A Time-based Passive Source Localization System for Narrow-band Signal

Time-based indoor localization has been investigated for several years but the accuracy of existing solutions is limited by several factors, e.g., imperfect synchronization, signal bandwidth and indoor environment. In this paper, we compare two time-based localization algorithms for narrow-band signals, i.e., multilateration and fingerprinting. First, we develop a new Linear Least Square (LLS) algorithm for Differential Time Difference Of Arrival (DTDOA). Second, fingerprinting is among the most successful approaches used for indoor localization and typically relies on the collection of measurements on signal strength over the area of interest. We propose an alternative by constructing fingerprints of fine-grained time information of the radio signal. We offer comprehensive analytical discussions on the feasibility of the approaches, which are backed up by evaluations in a software defined radio based IEEE 802.15.4 testbed. Our work contributes to research on localization with narrow-band signals. The results show that our proposed DTDOA-based LLS algorithm obviously improves the localization accuracy compared to traditional TDOA-based LLS algorithm but the accuracy is still limited because of the complex indoor environment. Furthermore, we show that time-based fingerprinting is a promising alternative to power-based fingerprinting.

A Passive Source Localization System for IEEE 802.15.4 Signal

In this work, we provide a passive location monitoring system for IEEE 802.15.4 signal emitters. The system adopts software defined radio techniques to passively overhear IEEE 802.15.4 packets and to extract power information from baseband signals. In our system, we provide a new model based on the nonlinear regression for ranging. After obtaining distance information, a Weighted Centroid (WC) algorithm is adopted to locate users. In WC, each weight is inversely proportional to the nth power of propagation distance, and the degree n is obtained from some initial measurements. We evaluate our system in a 16m-18m area with complex indoor propagation conditions. We are able to achieve a median error of 2:1m with only 4 anchor nodes.

Yellow laser light generation by frequency doubling of the output from a master oscillator fiber power amplifier system

We present a power-scalable approach for yellow laser-light generation based on standard Ytterbium (Yb) doped fibers. To force the cavity to lase at 1154 nm, far above the gain-maximum, measures must be taken to fulfill lasing condition and to suppress competing amplified spontaneous emission (ASE) in the high-gain region. To prove the principle we built a fiber-laser cavity and a fiber-amplifier both at 1154 nm. In between cavity and amplifier we suppressed the ASE by 70 dB using a fiber Bragg grating (FBG) based filter. Finally we demonstrated efficient single pass frequency doubling to 577 nm with a periodically poled lithium niobate crystal (PPLN). With our linearly polarized 1154 nm master oscillator power fiber amplifier (MOFA) system we achieved slope efficiencies of more than 15 % inside the cavity and 24 % with the fiber-amplifier. The frequency doubling followed the predicted optimal efficiency achievable with a PPLN crystal. So far we generated 1.5 W at 1154nm and 90 mW at 577 nm. Our MOFA approach for generation of 1154 nm laser radiation is power-scalable by using multi-stage amplifiers and large mode-area fibers and is therefore very promising for building a high power yellow laser-light source of several tens of Watt.

Bargaining for power and information : an experimental and theoretical analysis of the interaction between institutions, externalities and adverse selection

Bargaining is the building block of many economic interactions, ranging from bilateral to multilateral encounters and from situations in which the actors are individuals to negotiations between firms or countries. In all these settings, economists have been intrigued for a long time by the fact that some projects, trades or agreements are not realized even though they are mutually beneficial. On the one hand, this has been explained by incomplete information. A firm may not be willing to offer a wage that is acceptable to a qualified worker, because it knows that there are also unqualified workers and cannot distinguish between the two types. This phenomenon is known as adverse selection. On the other hand, it has been argued that even with complete information, the presence of externalities may impede efficient outcomes. To see this, consider the example of climate change. If a subset of countries agrees to curb emissions, non-participant regions benefit from the signatories’ efforts without incurring costs. These free riding opportunities give rise to incentives to strategically improve ones bargaining power that work against the formation of a global agreement. This thesis is concerned with extending our understanding of both factors, adverse selection and externalities. The findings are based on empirical evidence from original laboratory experiments as well as game theoretic modeling. On a very general note, it is demonstrated that the institutions through which agents interact matter to a large extent. Insights are provided about which institutions we should expect to perform better than others, at least in terms of aggregate welfare. Chapters 1 and 2 focus on the problem of adverse selection. Effective operation of markets and other institutions often depends on good information transmission properties. In terms of the example introduced above, a firm is only willing to offer high wages if it receives enough positive signals about the worker’s quality during the application and wage bargaining process. In Chapter 1, it will be shown that repeated interaction coupled with time costs facilitates information transmission. By making the wage bargaining process costly for the worker, the firm is able to obtain more accurate information about the worker’s type. The cost could be pure time cost from delaying agreement or cost of effort arising from a multi-step interviewing process. In Chapter 2, I abstract from time cost and show that communication can play a similar role. The simple fact that a worker states to be of high quality may be informative. In Chapter 3, the focus is on a different source of inefficiency. Agents strive for bargaining power and thus may be motivated by incentives that are at odds with the socially efficient outcome. I have already mentioned the example of climate change. Other examples are coalitions within committees that are formed to secure voting power to block outcomes or groups that commit to different technological standards although a single standard would be optimal (e.g. the format war between HD and BlueRay). It will be shown that such inefficiencies are directly linked to the presence of externalities and a certain degree of irreversibility in actions. I now discuss the three articles in more detail. In Chapter 1, Olivier Bochet and I study a simple bilateral bargaining institution that eliminates trade failures arising from incomplete information. In this setting, a buyer makes offers to a seller in order to acquire a good. Whenever an offer is rejected by the seller, the buyer may submit a further offer. Bargaining is costly, because both parties suffer a (small) time cost after any rejection. The difficulties arise, because the good can be of low or high quality and the quality of the good is only known to the seller. Indeed, without the possibility to make repeated offers, it is too risky for the buyer to offer prices that allow for trade of high quality goods. When allowing for repeated offers, however, at equilibrium both types of goods trade with probability one. We provide an experimental test of these predictions. Buyers gather information about sellers using specific price offers and rates of trade are high, much as the model’s qualitative predictions. We also observe a persistent over-delay before trade occurs, and this mitigates efficiency substantially. Possible channels for over-delay are identified in the form of two behavioral assumptions missing from the standard model, loss aversion (buyers) and haggling (sellers), which reconcile the data with the theoretical predictions. Chapter 2 also studies adverse selection, but interaction between buyers and sellers now takes place within a market rather than isolated pairs. Remarkably, in a market it suffices to let agents communicate in a very simple manner to mitigate trade failures. The key insight is that better informed agents (sellers) are willing to truthfully reveal their private information, because by doing so they are able to reduce search frictions and attract more buyers. Behavior observed in the experimental sessions closely follows the theoretical predictions. As a consequence, costless and non-binding communication (cheap talk) significantly raises rates of trade and welfare. Previous experiments have documented that cheap talk alleviates inefficiencies due to asymmetric information. These findings are explained by pro-social preferences and lie aversion. I use appropriate control treatments to show that such consideration play only a minor role in our market. Instead, the experiment highlights the ability to organize markets as a new channel through which communication can facilitate trade in the presence of private information. In Chapter 3, I theoretically explore coalition formation via multilateral bargaining under complete information. The environment studied is extremely rich in the sense that the model allows for all kinds of externalities. This is achieved by using so-called partition functions, which pin down a coalitional worth for each possible coalition in each possible coalition structure. It is found that although binding agreements can be written, efficiency is not guaranteed, because the negotiation process is inherently non-cooperative. The prospects of cooperation are shown to crucially depend on i) the degree to which players can renegotiate and gradually build up agreements and ii) the absence of a certain type of externalities that can loosely be described as incentives to free ride. Moreover, the willingness to concede bargaining power is identified as a novel reason for gradualism. Another key contribution of the study is that it identifies a strong connection between the Core, one of the most important concepts in cooperative game theory, and the set of environments for which efficiency is attained even without renegotiation.