Danger assessment of a spring-gun device (muzzleloader) loaded only with black powder

We report a case involving a spring-gun device (muzzleloader) loaded solely with gunpowder, installed next to shoes to prevent the neighbors' puppy from removing them. The booby trap was triggered by the 15-year-old dog-owners son when he tried to put the shoes out of the reach of the puppy. The boy suffered second degree superficial burns located mainly at the dorsal side of the right hand and fingers. To estimate the danger of the used weapon, several tests were undertaken on soap blocks from different distances and with different loads of black powder. The particle density per mm and the depth of black powder tattooing in the soap was compared with the boy's injuries, and found conclusive with the gun-owners statement regarding the loading of the weapon. Furthermore, our experiments indicated that the gunpowder load involved was not able to inflict permanent damage, not even to the eyes, at the here estimated firing distance.

Pediatric cranio-facial surgery. First-year's experience with a gun applying bioabsorbable tacks

AIM: In 2001 a prototype of a gun to apply bioabsorbable tacks in cranio-facial surgery has been developed. METHODS: From May 2001 to May 2002 this device has been used in the University Hospital of Innsbruck (Austria) for different cranioplasty procedures, in 34 children, showing its reliability for cranio-facial bone fixation. The children were affected by isolated craniosynostosis or by syndromical synostosis (Apert, Crouzon) and in a case of benign tumor of the parietal skull vault. The range of age, at the time of surgery, was between 3 months and 204 months of age. Bone segments were fixed using self-reinforced polylactide plates and tacks. RESULTS: Firm fixation was obtained intra-operatively and the operative time was reduced about 25-30 minutes as compared to use of plates and screws. This device has just one limitation in its own spring force: sometimes the bone thinner than 1 mm has been broken applying the tacks. CONCLUSION: After the first-year's experience it is possible to confirm that this device reduces, in selected cases, operative time, blood loss, risk of infection and, as a result, the costs.

Persistence of biological traces in gun Barrels after fatal contact shots

Backspatter from wounds caused by contact shots against a biological target had before been shown to be propelled into firearms' barrels where they can persist and be retrieved from as relevant forensic evidence. Herein, that insight was applied to the investigation of a case of multiple familial homicide with a firearm. Samples of backspatter were collected from the firearm using DNA-free swabs. DNA was extracted from the swabs, and 16 STR systems were PCR-amplified to generate DNA profiles of all victims shot by the firearm. The quality of the resulting DNA profiles was sufficient to exclude the perpetrator as donor and to differentiate the three closely related victims thereby proving that all three victims had been shot by the same firearm from very close or contact distance. A key insight gained from this case was that not only a firearms' barrel inside but other inner surfaces may be charged with profilable DNA.

Homicide-suicide cases in Switzerland and their impact on the Swiss Weapon Law

Homicide followed by the suicide of the offender is a well-known phenomenon. In most cases, it takes place in the context of the so-called "family tragedies." A recent series of such family tragedies in Switzerland prompted an intensive debate in the media and the Swiss government concerning the Swiss Weapon Law, in particular the requirement to keep personal army weapons at home. The present study of Homicide-Suicide cases in Switzerland, thus focuses on the role played by guns, especially military weapons, in such crimes. We investigated retrospectively 75 cases of Homicide-Suicide, comprising 172 individuals and spanning a period of 23 years in western and central Switzerland. Our results show that if guns were used in 76% of the cases, army weapons were the cause of death in 25% of the total. In 28% of the deaths caused by a gunshot, the exact type of the gun and its origin could not be determined. Thus, the majority of Homicide-Suicide cases in Switzerland involve the use of guns. The exact percentage of cases were military weapons were involved could not be defined. In our opinion, a stricter weapons law, restricting access to firearms, would be a factor of prevention of Homicide- Suicide cases in Switzerland.

A new microbiopsy system enables rapid preparation of tissue for high-pressure freezing

A microbiopsy system was developed to overcome long sampling times for tissues before they are cryo-fixed by high-pressure freezing. A commercially available biopsy gun was adapted to the needs of small-organ excisions, and biopsy needles were modified to allow small samples (0.6 mm x 1.2 mm x 0.3 mm) to be taken. Specimen platelets with a central slot of the same dimensions as the biopsy are used. A self-made transfer device (in the meantime optimized by Leica-Microsystems [Vienna, Austria]) coordinates the transfer of the excised sample from the biopsy needle into the platelet slot and the subsequent loading in a specimen holder, which is then introduced into a high-pressure freezer (Leica EM PACT; Leica Microsystems, Vienna, Austria). Thirty seconds preparation time is needed from excision until high-pressure freezing. Brain, liver, kidney and muscle excisions of anesthetised rats are shown to be well frozen.

Haptics in forensics: the possibilities and advantages in using the haptic device for reconstruction approaches in forensic science

Non-invasive documentation methods such as surface scanning and radiological imaging are gaining in importance in the forensic field. These three-dimensional technologies provide digital 3D data, which are processed and handled in the computer. However, the sense of touch gets lost using the virtual approach. The haptic device enables the use of the sense of touch to handle and feel digital 3D data. The multifunctional application of a haptic device for forensic approaches is evaluated and illustrated in three different cases: the representation of bone fractures of the lower extremities, by traffic accidents, in a non-invasive manner; the comparison of bone injuries with the presumed injury-inflicting instrument; and in a gunshot case, the identification of the gun by the muzzle imprint, and the reconstruction of the holding position of the gun. The 3D models of the bones are generated from the Computed Tomography (CT) images. The 3D models of the exterior injuries, the injury-inflicting tools and the bone injuries, where a higher resolution is necessary, are created by the optical surface scan. The haptic device is used in combination with the software FreeForm Modelling Plus for touching the surface of the 3D models to feel the minute injuries and the surface of tools, to reposition displaced bone parts and to compare an injury-causing instrument with an injury. The repositioning of 3D models in a reconstruction is easier, faster and more precisely executed by means of using the sense of touch and with the user-friendly movement in the 3D space. For representation purposes, the fracture lines of bones are coloured. This work demonstrates that the haptic device is a suitable and efficient application in forensic science. The haptic device offers a new way in the handling of digital data in the virtual 3D space.

Homicide-suicides compared to homicides and suicides: systematic review and meta-analysis.

Homicide-suicides, the murder of one or several individuals followed by the suicide of the perpetrator, are rare but have devastating effects on families and communities. We did a systematic review and meta-analysis of studies comparing perpetrators of homicide-suicides with perpetrators of simple homicides and suicides and examined the proportion of firearm use and its correlation with firearm availability. We searched Medline and Embase from inception to July 2012 and identified 27 eligible studies. Perpetrators of homicide-suicides were older and more likely to be male and married to or separated from their victims than perpetrator of simple homicides or suicides. Influence of alcohol and a history of domestic violence or unemployment were less prevalent in homicide-suicides than in homicides. The proportion of firearm use in homicide-suicides varied across countries and was highest in the USA, Switzerland and South Africa, followed by Australia, Canada, The Netherlands and England and Wales, with a strong correlation between the use of firearms and the level of civilian gun ownership in the country. Our results indicate that homicide-suicides represent a distinct entity, with characteristics distinguishing them both from homicides and suicides.

A rapid microbiopsy system to improve the preservation of biological samples prior to high-pressure freezing

A microbiopsy system for fast excision and transfer of biological specimens from donor to high-pressure freezer was developed. With a modified, commercially available, Promag 1.2 biopsy gun, tissue samples can be excised with a size small enough (0.6 mm x 1.2 mm x 0.3 mm) to be easily transferred into a newly designed specimen platelet. A self-made transfer unit allows fast transfer of the specimen from the needle into the specimen platelet. The platelet is then fixed in a commercially available specimen holder of a high-pressure freezing machine (EM PACT, Leica Microsystems, Vienna, Austria) and frozen therein. The time required by a well-instructed (but not experienced) person to execute all steps is in the range of half a minute. This period is considered short enough to maintain the excised tissue pieces close to their native state. We show that a range of animal tissues (liver, brain, kidney and muscle) are well preserved. To prove the quality of freezing achieved with the system, we show vitrified ivy leaves high-pressure frozen in the new specimen platelet.

Fatal contact shot to the chest caused by the gas jet from a muzzle-loading pistol discharging only black powder and no bullet: case study and experimental simulation of the wounding effect.

In modern medico-legal literature, only a small number of publications deal with fatal injuries from black powder guns. Most of them focus on the morphological features such as intense soot soiling, blast tattooing and burn effects in close-range shots or describe the wound ballistics of spherical lead bullets. Another kind of "unusual" and potentially lethal weapons are handguns destined for firing only blank cartridges such as starter and alarm pistols. The dangerousness of these guns is restricted to very close and contact range shots and results from the gas jet produced by the deflagration of the propellant. The present paper reports on a suicide committed with a muzzle-loading percussion pistol cal. 45. An unusually large stellate entrance wound was located in the precordial region, accompanied by an imprint mark from the ramrod and a faint greenish discoloration (apparently due to the formation of sulfhemoglobin). Autopsy revealed an oversized powder cavity, multiple fractures of the anterior thoracic wall as well as ruptures of the heart, the aorta, the left hepatic lobe and the diaphragm. In total, the zone of mechanical destruction had a diameter of approx. 15 cm. As there was no exit wound and no bullet lodged in the body, the injury was caused exclusively by the inrushing combustion gases of the propellant (black powder) comparable with the gas jet of a blank cartridge gun. In contact shots to ballistic gelatine using the suicide's pistol loaded with black powder but no projectile, the formation of a nearly spherical cavity could be demonstrated by means of a high-speed camera. The extent of the temporary cavity after firing with 5 g of black powder roughly corresponded to the zone of destruction found in the suicide's body.

Identification of gunshots to the head by detection of RNA in backspatter primarily expressed in brain tissue

Traces of backspatter recovered from the inside of the barrel of a gun that was used to deliver suicidal or homicidal contact shots may be a source of valuable forensic evidence and first systematic investigations of the persistence of victim DNA from inside firearms have been presented. The aim of the present study was to include victim RNA in such analyses to determine the origin of tissues in addition and parallel to standard DNA profiling for forensic identification purposes. In a first step, suitable mRNA (C1orf61) and micro-RNAs (miR-124a and miR-124*) that are primarily expressed in brain tissue were selected from potential candidates and confirmed using quantitative PCR (qPCR). Secondly, a co-extraction procedure for RNA and DNA was established and brain differentiability of the selected RNAs was demonstrated via qPCR using samples from experimental shots at ballistic models. In a third step, this procedure was successfully applied to analyse samples from real casework comprising eight cases of suicidal contact shots. In this pilot study, we are first to report the possibility of co-extracting mRNA, miRNA and DNA from ballistic trace samples collected from the inside of firearms and we demonstrate that RNA and DNA based analyses can be performed in parallel to produce informative and highly complementary evidence.

Firearm legislation and firearm mortality in the USA: a cross-sectional, state-level study.

BACKGROUND In an effort to reduce firearm mortality rates in the USA, US states have enacted a range of firearm laws to either strengthen or deregulate the existing main federal gun control law, the Brady Law. We set out to determine the independent association of different firearm laws with overall firearm mortality, homicide firearm mortality, and suicide firearm mortality across all US states. We also projected the potential reduction of firearm mortality if the three most strongly associated firearm laws were enacted at the federal level. METHODS We constructed a cross-sectional, state-level dataset from Nov 1, 2014, to May 15, 2015, using counts of firearm-related deaths in each US state for the years 2008-10 (stratified by intent [homicide and suicide]) from the US Centers for Disease Control and Prevention's Web-based Injury Statistics Query and Reporting System, data about 25 firearm state laws implemented in 2009, and state-specific characteristics such as firearm ownership for 2013, firearm export rates, and non-firearm homicide rates for 2009, and unemployment rates for 2010. Our primary outcome measure was overall firearm-related mortality per 100 000 people in the USA in 2010. We used Poisson regression with robust variances to derive incidence rate ratios (IRRs) and 95% CIs. FINDINGS 31 672 firearm-related deaths occurred in 2010 in the USA (10·1 per 100 000 people; mean state-specific count 631·5 [SD 629·1]). Of 25 firearm laws, nine were associated with reduced firearm mortality, nine were associated with increased firearm mortality, and seven had an inconclusive association. After adjustment for relevant covariates, the three state laws most strongly associated with reduced overall firearm mortality were universal background checks for firearm purchase (multivariable IRR 0·39 [95% CI 0·23-0·67]; p=0·001), ammunition background checks (0·18 [0·09-0·36]; p<0·0001), and identification requirement for firearms (0·16 [0·09-0·29]; p<0·0001). Projected federal-level implementation of universal background checks for firearm purchase could reduce national firearm mortality from 10·35 to 4·46 deaths per 100 000 people, background checks for ammunition purchase could reduce it to 1·99 per 100 000, and firearm identification to 1·81 per 100 000. INTERPRETATION Very few of the existing state-specific firearm laws are associated with reduced firearm mortality, and this evidence underscores the importance of focusing on relevant and effective firearms legislation. Implementation of universal background checks for the purchase of firearms or ammunition, and firearm identification nationally could substantially reduce firearm mortality in the USA. FUNDING None.

Bilateral deep brain stimulation: the placement of the second electrode is not necessarily less accurate than that of the first one.

BACKGROUND Deep brain stimulation (DBS) is recognized as an effective treatment for movement disorders. We recently changed our technique, limiting the number of brain penetrations to three per side. OBJECTIVES The first aim was to evaluate the electrode precision on both sides of surgery since we implemented this surgical technique. The second aim was to analyse whether or not the electrode placement was improved with microrecording and macrostimulation. METHODS We retrospectively reviewed operation protocols and MRIs of 30 patients who underwent bilateral DBS. For microrecording and macrostimulation, we used three parallel channels of the 'Ben Gun' centred on the MRI-planned target. Pre- and post-operative MRIs were merged. The distance between the planned target and the centre of the implanted electrode artefact was measured. RESULTS There was no significant difference in targeting precision on both sides of surgery. There was more intra-operative adjustment of the second electrode positioning based on microrecording and macrostimulation, which allowed to significantly approach the MRI-planned target on the medial-lateral axis. CONCLUSION There was more electrode adjustment needed on the second side, possibly in relation with brain shift. We thus suggest performing a single central track with electrophysiological and clinical assessment, with multidirectional exploration on demand for suboptimal clinical responses.