A triplet spike-timing–dependent plasticity model generalizes the Bienenstock–Cooper–Munro rule to higher-order spatiotemporal correlations

Synaptic strength depresses for low and potentiates for high activation of the postsynaptic neuron. This feature is a key property of the Bienenstock–Cooper–Munro (BCM) synaptic learning rule, which has been shown to maximize the selectivity of the postsynaptic neuron, and thereby offers a possible explanation for experience-dependent cortical plasticity such as orientation selectivity. However, the BCM framework is rate-based and a significant amount of recent work has shown that synaptic plasticity also depends on the precise timing of presynaptic and postsynaptic spikes. Here we consider a triplet model of spike-timing–dependent plasticity (STDP) that depends on the interactions of three precisely timed spikes. Triplet STDP has been shown to describe plasticity experiments that the classical STDP rule, based on pairs of spikes, has failed to capture. In the case of rate-based patterns, we show a tight correspondence between the triplet STDP rule and the BCM rule. We analytically demonstrate the selectivity property of the triplet STDP rule for orthogonal inputs and perform numerical simulations for nonorthogonal inputs. Moreover, in contrast to BCM, we show that triplet STDP can also induce selectivity for input patterns consisting of higher-order spatiotemporal correlations, which exist in natural stimuli and have been measured in the brain. We show that this sensitivity to higher-order correlations can be used to develop direction and speed selectivity.

Sex Differences in Semantic Processing: Event-Related Brain Potentials Distinguish between Lower and Higher Order Semantic Analysis during Word Reading

Behavioral studies suggest that women and men differ in the strategic elaboration of verbally encoded information especially in the absence of external task demand. However, measuring such covert processing requires other than behavioral data. The present study used event-related potentials to compare sexes in lower and higher order semantic processing during the passive reading of semantically related and unrelated word pairs. Women and men showed the same early context effect in the P1-N1 transition period. This finding indicates that the initial lexical-semantic access is similar in men and women. In contrast, sexes differed in higher order semantic processing. Women showed an earlier and longer lasting context effect in the N400 accompanied by larger signal strength in temporal networks similarly recruited by men and women. The results suggest that women spontaneously conduct a deeper semantic analysis. This leads to faster processing of related words in the active neural networks as reflected in a shorter stability of the N400 map in women. Taken together, the findings demonstrate that there is a selective sex difference in the controlled semantic analysis during passive word reading that is not reflected in different functional organization but in the depth of processing.

Remarks on higher-order hadronic corrections to the muon g-2

Recently, it was shown that insertions of hadronic vacuum polarization at O(α4) generate non-negligible effects in the calculation of the anomalous magnetic moment of the muon. This result raises the question if other hadronic diagrams at this order might become relevant for the next round of g−2 measurements as well. In this note we show that a potentially enhanced such contribution, hadronic light-by-light scattering in combination with electron vacuum polarization, is already sufficiently suppressed.

Higher order parametric excitation modes for spaceborne quadrupole mass spectrometers

This paper describes a technique to significantly improve upon the mass peak shape and mass resolution of spaceborne quadrupolemass spectrometers (QMSs) through higher order auxiliary excitation of the quadrupole field. Using a novel multiresonant tank circuit, additional frequency components can be used to drive modulating voltages on the quadrupole rods in a practical manner, suitable for both improved commercial applications and spaceflight instruments. Auxiliary excitation at frequencies near twice that of the fundamental quadrupole RF frequency provides the advantages of previously studied parametric excitation techniques, but with the added benefit of increased sensed excitation amplitude dynamic range and the ability to operate voltage scan lines through the center of upper stability islands. Using a field programmable gate array, the amplitudes and frequencies of all QMS signals are digitally generated and managed, providing a robust and stable voltage control system. These techniques are experimentally verified through an interface with a commercial Pfeiffer QMG422 quadrupole rod system. When operating through the center of a stability island formed from higher order auxiliary excitation, approximately 50% and 400% improvements in 1% mass resolution and peak stability were measured, respectively, when compared with traditional QMS operation. Although tested with a circular rod system, the presented techniques have the potential to improve the performance of both circular and hyperbolic rod geometry QMS sensors.

Comparing the performance of hyperbolic and circular rod quadrupole mass spectrometers with applied higher order auxiliary excitation

This work applies higher order auxiliary excitation techniques to two types of quadrupole mass spectrometers (QMSs): commercial systems and spaceborne instruments. The operational settings of a circular rod geometry commercial system and an engineering test-bed for a hyperbolic rod geometry spaceborne instrument were matched, with the relative performance of each sensor characterized with and without applied excitation using isotopic measurements of Kr+. Each instrument was operated at the limit of the test electronics to determine the effect of auxiliary excitation on extending instrument capabilities. For the circular rod sensor, with applied excitation, a doubling of the mass resolution at 1% of peak transmission resulted from the elimination of the low-mass side peak tail typical of such rod geometries. The mass peak stability and ion rejection efficiency were also increased by factors of 2 and 10, respectively, with voltage scan lines passing through the center of stability islands formed from auxiliary excitation. Auxiliary excitation also resulted in factors of 6 and 2 in peak stability and ion rejection efficiency, respectively, for the hyperbolic rod sensor. These results not only have significant implications for the use of circular rod quadrupoles with applied excitation as a suitable replacement for traditional hyperbolic rod sensors, but also for extending the capabilities of existing hyperbolic rod QMSs for the next generation of spaceborne instruments and low-mass commercial systems.

Higher order elicitability and Osband’s principle

A statistical functional, such as the mean or the median, is called elicitable if there is a scoring function or loss function such that the correct forecast of the functional is the unique minimizer of the expected score. Such scoring functions are called strictly consistent for the functional. The elicitability of a functional opens the possibility to compare competing forecasts and to rank them in terms of their realized scores. In this paper, we explore the notion of elicitability for multi-dimensional functionals and give both necessary and sufficient conditions for strictly consistent scoring functions. We cover the case of functionals with elicitable components, but we also show that one-dimensional functionals that are not elicitable can be a component of a higher order elicitable functional. In the case of the variance, this is a known result. However, an important result of this paper is that spectral risk measures with a spectral measure with finite support are jointly elicitable if one adds the “correct” quantiles. A direct consequence of applied interest is that the pair (Value at Risk, Expected Shortfall) is jointly elicitable under mild conditions that are usually fulfilled in risk management applications.

Fault development and interaction in distributed strike-slip shear zones: an experimental approach

Analogue model experiments using both brittle and viscous materials were performed to investigate the development and interaction of strike-slip faults in zones of distributed shear deformation. At low strain, bulk dextral shear deformation of an initial rectangular model is dominantly accommodated by left-stepping, en echelon strike-slip faults (Riedel shears, R) that form in response to the regional (bulk) stress field. Push-up zones form in the area of interaction between adjacent left-stepping Riedel shears. In cross sections, faults bounding push-up zones have an arcuate shape or merge at depth. Adjacent left-stepping R shears merge by sideways propagation or link by short synthetic shears that strike subparallel to the bulk shear direction. Coalescence of en echelon R shears results in major, through-going faults zones (master faults). Several parallel master faults develop due to the distributed nature of deformation. Spacing between master faults is related to the thickness of the brittle layers overlying the basal viscous layer. Master faults control to a large extent the subsequent fault pattern. With increasing strain, relatively short antithetic and synthetic faults develop mostly between old, but still active master faults. The orientation and evolution of the new faults indicate local modifications of the stress field. In experiments lacking lateral borders, closely spaced parallel antithetic faults (cross faults) define blocks that undergo clockwise rotation about a vertical axis with continuing deformation. Fault development and fault interaction at different stages of shear strain in our models show similarities with natural examples that have undergone distributed shear.

Measurement of flow harmonics with multi-particle cumulants in Pb+Pb collisions at √sNN=2.76 TeV with the ATLAS detector

ATLAS measurements of the azimuthal anisotropy in lead–lead collisions at √sNN = 2.76 TeV are shown using a dataset of approximately 7μb−1 collected at the LHC in 2010. The measurements are performed for charged particles with transversemomenta 0.5 < pT < 20 GeV and in the pseudorapidity range |η| < 2.5. The anisotropy is characterized by the Fourier coefficients, vn, of the charged-particle azimuthal angle distribution for n = 2–4. The Fourier coefficients are evaluated using multi-particle cumulants calculated with the generating function method. Results on the transverse momentum, pseudorapidity and centrality dependence of the vn coefficients are presented. The elliptic flow, v2, is obtained from the two-, four-, six- and eight-particle cumulants while higher-order coefficients, v3 and v4, are determined with two- and four-particle cumulants. Flow harmonics vn measured with four-particle cumulants are significantly reduced compared to the measurement involving two-particle cumulants. A comparison to vn measurements obtained using different analysis methods and previously reported by the LHC experiments is also shown. Results of measurements of flow fluctuations evaluated with multiparticle cumulants are shown as a function of transverse momentum and the collision centrality. Models of the initial spatial geometry and its fluctuations fail to describe the flow fluctuations measurements.

Interpretation of fluid inclusions in quartz deformed by weak ductile shearing: reconstruction of differential stress magnitudes and pre-deformation fluid properties

A well developed theoretical framework is available in which paleofluid properties, such as chemical composition and density, can be reconstructed from fluid inclusions in minerals that have undergone no ductile deformation. The present study extends this framework to encompass fluid inclusions hosted by quartz that has undergone weak ductile deformation following fluid entrapment. Recent experiments have shown that such deformation causes inclusions to become dismembered into clusters of irregularly shaped relict inclusions surrounded by planar arrays of tiny, new-formed (neonate) inclusions. Comparison of the experimental samples with a naturally sheared quartz vein from Grimsel Pass, Aar Massif, Central Alps, Switzerland, reveals striking similarities. This strong concordance justifies applying the experimentally derived rules of fluid inclusion behaviour to nature. Thus, planar arrays of dismembered inclusions defining cleavage planes in quartz may be taken as diagnostic of small amounts of intracrystalline strain. Deformed inclusions preserve their pre-deformation concentration ratios of gases to electrolytes, but their H2O contents typically have changed. Morphologically intact inclusions, in contrast, preserve the pre-deformation composition and density of their originally trapped fluid. The orientation of the maximum principal compressive stress (σ1σ1) at the time of shear deformation can be derived from the pole to the cleavage plane within which the dismembered inclusions are aligned. Finally, the density of neonate inclusions is commensurate with the pressure value of σ1σ1 at the temperature and time of deformation. This last rule offers a means to estimate magnitudes of shear stresses from fluid inclusion studies. Application of this new paleopiezometer approach to the Grimsel vein yields a differential stress (σ1–σ3σ1–σ3) of ∼300 MPa∼300 MPa at View the MathML source390±30°C during late Miocene NNW–SSE orogenic shortening and regional uplift of the Aar Massif. This differential stress resulted in strain-hardening of the quartz at very low total strain (<5%<5%) while nearby shear zones were accommodating significant displacements. Further implementation of these experimentally derived rules should provide new insight into processes of fluid–rock interaction in the ductile regime within the Earth's crust.

Evaluation of an inventory for the assessment of critical incidents involving football fans

Introduction: Fan violence is a frequent occurrence in Swiss football (Bundesamt für Polizei, 2015) leading to high costs for prevention and control (Mensch & Maurer, 2014). Various theories put forward an explanation of fan violence, such as the Elaborated Social Identity Model (Drury & Reicher, 2000)and the Aggravation Mitigation Model (Hylander & Guvå, 2010). Important observations from these theories are the multi-dimensional understanding of fan violence and the Dynamics occurring in the fan group. Nevertheless, none of them deal with critical incidents (CIs) which involve a tense atmosphere combined with a higher risk of fan violence. Schumacher Dimech, Brechbühl and Seiler (2015) tackled this gap in research and explored CIs where 43 defining criteria were identified and compiled in an integrated model of CIs. The defining criteria were categorised in four higher-order themes “antecedents” (e.g. a documented history of fan rivalry), “triggers” (e.g. the arrest of a fan), “reactions” (e.g. fans masking themselves) and “consequences” (e.g. fans avoiding communication with fan social workers). Methods: An inventory based on this model is being developed including these 43 criteria. In an exploratory phase, this inventory was presented as an online questionnaire and was completed by 143 individuals. Three main questions are examined: Firstly, the individual items are tested using descriptive analyses. An item analysis is conducted to test reliability, item difficulty and discriminatory power. Secondly, the model’s four higher-order themes are tested using exploratory factor analysis (EFA). Thirdly, differences between sub -groups are explored, such as gender and age-related differences. Results: Respondents rated the items’ importance as high and the quota of incomplete responses was not systematic. Two items were removed from the inventory because of low mean or a high rate of “don’t know”-responses. EFA produced a six-factor solution grouping items into match-related factors, repressive measures, fans’ delinquent behaviour, intra-group behaviour, communication and control and inter-group factors. The item “fans consume alcohol” could not be ordered into any category but was retained since literature accentuates this factor’s influence on fan violence. Analyses examining possible differences between groups are underway. Discussion: Results exploring the adequacy of this inventory assessing defining criteria of CIs in football are promising and thus further evaluative investigation is recommended. This inventory can be used in two ways: as a standardised instrument of assessment for experts evaluating specific CIs and as an instrument for exploring differences in perception and assessment of a CI e.g. gender and age differences, differences between interest groups and stakeholders.

Evaluation of an inventory for the assessment of critical incidents involving football fans

Introduction: Fan violence is a frequent occurrence in Swiss football (Bundesamt für Polizei, 2015) leading to high costs for prevention and control (Mensch & Maurer, 2014). Various theories put forward an explanation of fan violence, such as the Elaborated Social Identity Model (Drury & Reicher, 2000) and the Aggravation Mitigation Model (Hylander & Guvå, 2010). Important observations from these theories are the multi-dimensional understanding of fan violence and the dynamics occurring in the fan group. Nevertheless, none of them deal with critical incidents (CIs) which involve a tense atmosphere combined with a higher risk of fan violence. Schumacher Dimech, Brechbühl and Seiler (2015) tackled this gap in research and explored CIs where 43 defining criteria were identified and compiled in an integrated model of CIs. The defining criteria were categorised in four higher-order themes “antecedents” (e.g. a documented history of fan rivalry), “triggers” (e.g. the arrest of a fan), “reactions” (e.g. fans masking themselves) and “consequences” (e.g. fans avoiding communication with fan social workers). Methods: An inventory based on this model is being developed including these 43 criteria. In an exploratory phase, this inventory was presented as an online questionnaire and was completed by 143 individuals. Three main questions are examined: Firstly, the individual items are tested using descriptive analyses. An item analysis is conducted to test reliability, item difficulty and discriminatory power. Secondly, the model’s four higher-order themes are tested using exploratory factor analysis (EFA). Thirdly, differences between sub-groups are explored, such as gender and agerelated differences. Results: Respondents rated the items’ importance as high and the quota of incomplete responses was not systematic. Two items were removed from the inventory because of low mean or a high rate of “don’t know”-responses. EFA produced a six-factor solution grouping items into match-related factors, repressive measures, fans’ delinquent behaviour, intra-group behaviour, communication and control and inter-group factors. The item “fans consume alcohol” could not be ordered into any category but was retained since literature accentuates this factor’s influence on fan violence. Analyses examining possible differences between groups are underway. Discussion: Results exploring the adequacy of this inventory assessing defining criteria of CIs in football are promising and thus further evaluative investigation is recommended. This inventory can be used in two ways: as a standardised instrument of assessment for experts evaluating specific CIs and as an instrument for exploring differences in perception and assessment of a CI e.g. gender and age differences, differences between interest groups and stakeholders. References: Bundesamt für Polizei. (2015). Jahresbericht 2014. Kriminalitätsbekämpfung Bund. Lage, Massnahmen und Mittel [Electronic Version]. Drury, J., & Reicher, S. (2000). Collective action and psychological change. The emergence of new social identities. British Journal of Social Psychology, 39, 579-604. Hylander, I., & Guvå, G. (2010). Misunderstanding of out-group behaviour: Different interpretations of the same crowd events among police officers and demonstrators. Nordic Psychology, 62, 25-47. Schumacher-Dimech, A., Brechbühl, A. &, Seiler, R. (2016). Dynamics of critical incidents with potentially violent outcomes involving ultra fans: an explorative study. Sport in Society. Advance online publication. doi: 10.1080/17430437.2015.1133597

Semantic memory involvement in the default mode network: a functional neuroimaging study using independent component analysis

The Default Mode Network (DMN) is a higher order functional neural network that displays activation during passive rest and deactivation during many types of cognitive tasks. Accordingly, the DMN is viewed to represent the neural correlate of internally-generated self-referential cognition. This hypothesis implies that the DMN requires the involvement of cognitive processes, like declarative memory. The present study thus examines the spatial and functional convergence of the DMN and the semantic memory system. Using an active block-design functional Magnetic Resonance Imaging (fMRI) paradigm and Independent Component Analysis (ICA), we trace the DMN and fMRI signal changes evoked by semantic, phonological and perceptual decision tasks upon visually-presented words. Our findings show less deactivation during semantic compared to the two non-semantic tasks for the entire DMN unit and within left-hemispheric DMN regions, i.e., the dorsal medial prefrontal cortex, the anterior cingulate cortex, the retrosplenial cortex, the angular gyrus, the middle temporal gyrus and the anterior temporal region, as well as the right cerebellum. These results demonstrate that well-known semantic regions are spatially and functionally involved in the DMN. The present study further supports the hypothesis of the DMN as an internal mentation system that involves declarative memory functions.