Impacts of out-migration on land management in mountain areas

INTRODUCTION Out-migration from mountain areas is leaving behind half families and elderly to deal with managing the land alongside daily life challenges. A potential reduction of labour force as well as expertise on cropping practices, maintenance of terraces and irrigation canals, slope stabilization, grazing, forest and other land management practices are further challenged by changing climate conditions and increased environmental threats. An understanding of the resilience of managed land resources in order to enhance adaptation to environmental and socio-economic variability, and evidence of the impact of Sustainable Land Management (SLM) on the mitigation of environmental threats have so far not sufficiently been tackled. The study presented here aims to find out how land management in mountains is being affected by migration in the context of natural hazards and climate change in two study sites, namely Quillacollo District of Bolivia and Panchase area of Western Nepal, and which measures are needed to increase resilience of livelihoods and land management practices. The presentation includes draft results from first field work periods in both sites. A context of high vulnerability According to UNISDR, vulnerability is defined as “the characteristics and circumstances of a community, system or asset that make it susceptible to the damaging effects of a hazard”.Hazards are another threat affecting people’s livelihood in mountainous area. They can be either natural or human induced. Landslides, debris flow and flood are affecting peopleGood land management can significantly reduce occurrence of hazards. In the opposite bad land management or land abandonment can lead to negative consequences on the land, and thus again increase vulnerability of people’s livelihoods. METHODS The study integrates bio-physical and socio-economic data through a case study as well as a mapping approach. From the social sciences, well-tested participatory qualitative methodologies, typically used in Vulnerability and Capacity Analyses, such as semi-structured interviews with so-called ‘key informants’, transect walks, participatory risk and social resource mapping are applied. The bio-physical analysis of the current environmental conditions determining hazards and structural vulnerability are obtained from remote sensing analysis, field work studies, and GIS analysis The assessment of the consequences of migration in the area of origin is linked with a mapping and appraisal of land management practices (www.wocat.net, Schwilch et al., 2011). The WOCAT mapping tool (WOCAT/LADA/DESIRE 2008) allows capturing the major land management practices / technologies, their spread, effectiveness and impact within a selected area. Data drawn from a variety of sources are compiled and harmonised by a team of experts, consisting of land degradation and conservation specialists working in consultation with land users from various backgrounds. The specialists’ and land users’ knowledge is combined with existing datasets and documents (maps, GIS layers, high-resolution satellite images, etc.) in workshops that are designed to build consensus regarding the variables used to assess land degradation and SLM. This process is also referred to as participatory expert assessment or consensus mapping. The WOCAT mapping and SLM documentation methodologies are used together with participatory mapping and other socio-economic data collection (interviews, questionnaires, focus group discussions, expert consultation) to combine information about migration types and land management issues. GIS and other spatial visualization tools (e.g. Google maps) will help to represent and understand these links. FIRST RESULTS Nepal In Nepal, migration is a common strategy to improve the livelihoods. Migrants are mostly men and they migrate to other Asian countries, first to India and then to the Gulf countries. Only a few women are migrating abroad. Women migrate essentially to main Nepali cities when they can afford it. Remittances are used primarily for food and education; however they are hardly used for agricultural purposes. Besides traditional agriculture being maintained, only few new practices are emerging, such as vegetable farming or agroforestry. The land abandonment is a growing consequence of outmigration, resulting in the spreading of invasive species. However, most impacts of migration on land management are not yet clear. Moreover, education is a major concern for the respondents; they want their children having a better education and get better opportunities. Linked to this, unemployment is another major concern of the respondents, which in turn is “solved” through outmigration. Bolivia Migration is a common livelihood strategy in Bolivia. In the area of study, whole families are migrating downward to the cities of the valleys or to other departments of Bolivia, especially to Chapare (tropics) for the coca production and to Santa Cruz. Some young people are migrating abroad, mostly to Argentina. There are few remittances and if those are sent to the families in the mountain areas, then they are mainly used for agriculture purpose. The impacts of migration on land management practices are not clear although there are some important aspects to be underlined. The people who move downward are still using their land and coming back during part of the week to work on it. As a consequence of this multi-residency, there is a tendency to reduce land management work or to change the way the land is used. As in Nepal, education is a very important issue in this area. There is no secondary school, and only one community has a primary school. After the 6th grade students have therefore to go down into the valley towns to study. The lack of basic education is pushing more and more people to move down and to leave the mountains. CONCLUSIONS This study is on-going, more data have to be collected to clearly assess the impacts of out-migration on land management in mountain areas. The first results of the study allow us to present a few interesting findings. The two case studies are very different, however in both areas, young people are not staying anymore in the mountains and leave behind half families and elderly to manage the land. Additionally in both cases education is a major reason for moving out, even though the causes are not always the same. More specifically, in the case of Nepal, the use of remittances underlines the fact that investment in agriculture is not the first choice of a family. In the case of Bolivia, some interesting findings showed that people continue to work on their lands even if they move downward. The further steps of the study will help to explore these interesting issues in more detail. REFERENCES Schwilch G., Bestelmeyer B., Bunning S., Critchley W., Herrick J., Kellner K., Liniger H.P., Nachtergaele F., Ritsema C.J., Schuster B., Tabo R., van Lynden G., Winslow M. 2011. Experiences in Monitoring and Assessment of Sustainable Land Management. Land Degradation & Development 22 (2), 214-225. Doi 10.1002/ldr.1040 WOCAT/LADA/DESIRE 2008. A Questionnaire for Mapping Land Degradation and Sustainable Land Management. Liniger H.P., van Lynden G., Nachtergaele F., Schwilch G. (eds), Centre for Development and Environment, Institute of Geography, University of Berne, Berne

Desertification mitigation and water harvesting based on sustainable land management

Traditionally, desertification research has focused on degradation assessments, whereas prevention and mitigation strategies have not sufficiently been emphasised, although the concept of sustainable land management (SLM) is increasingly being acknowledged. SLM strategies are interventions at the local to regional scale aiming at increasing productivity, protecting the natural resource base, and improving livelihoods. The global WOCAT initiative and its partners have developed harmonized frameworks to compile, evaluate and analyse the impact of SLM practices around the globe. Recent studies within the EU research project DESIRE developed a methodological framework that combines a collective learning and decision-making approach with use of best practices from the WOCAT database. In-depth assessment of 30 technologies and 8 approaches from 17 desertification sites enabled an evaluation of how SLM addresses prevalent dryland threats such as water scarcity, soil and vegetation degradation, low production, climate change, resource use conflicts and migration. Among the impacts attributed to the documented technologies, those mentioned most were diversified and enhanced production and better management of water and soil degradation, whether through water harvesting, improving soil moisture, or reducing runoff. Water harvesting offers under-exploited opportunities for the drylands and the predominantly rainfed farming systems of the developing world. Recently compiled guidelines introduce the concepts behind water harvesting and propose a harmonised classification system, followed by an assessment of suitability, adoption and up-scaling of practices. Case studies go from large-scale floodwater spreading that make alluvial plains cultivable, to systems that boost cereal production in small farms, as well as practices that collect and store water from household compounds. Once contextualized and set in appropriate institutional frameworks, they can form part of an overall adaptation strategy for land users. More field research is needed to reinforce expert assessments of SLM impacts and provide the necessary evidence-based rationale for investing in SLM. This includes developing methods to quantify and value ecosystem services, both on-site and off-site, and assess the resilience of SLM practices, as currently aimed at within the new EU CASCADE project.

Scheduling the production of rolling ingots: Industrial context, model, and solution method

We study a real-world scheduling problem arising in the context of a rolling ingots production. First we review the production process and discuss peculiarities that have to be observed when scheduling a given set of production orders on the production facilities. We then show how to model this scheduling problem using prescribed time lags between operations, different kinds of resources, and sequence-dependent changeovers. A branch-and-bound solution procedure is presented in the second part. The basic principle is to relax the resource constraints by assuming infinite resource availability. Resulting resource conflicts are then stepwise resolved by introducing precedence relationships among operations competing for the same resources. The algorithm has been implemented as a beam search heuristic enumerating alternative sets of precedence relationships.

Advanced production scheduling for batch plants in process industries

An Advanced Planning System (APS) offers support at all planning levels along the supply chain while observing limited resources. We consider an APS for process industries (e.g. chemical and pharmaceutical industries) consisting of the modules network design (for long–term decisions), supply network planning (for medium–term decisions), and detailed production scheduling (for short–term decisions). For each module, we outline the decision problem, discuss the specifi cs of process industries, and review state–of–the–art solution approaches. For the module detailed production scheduling, a new solution approach is proposed in the case of batch production, which can solve much larger practical problems than the methods known thus far. The new approach decomposes detailed production scheduling for batch production into batching and batch scheduling. The batching problem converts the primary requirements for products into individual batches, where the work load is to be minimized. We formulate the batching problem as a nonlinear mixed–integer program and transform it into a linear mixed–binary program of moderate size, which can be solved by standard software. The batch scheduling problem allocates the batches to scarce resources such as processing units, workers, and intermediate storage facilities, where some regular objective function like the makespan is to be minimized. The batch scheduling problem is modelled as a resource–constrained project scheduling problem, which can be solved by an efficient truncated branch–and–bound algorithm developed recently. The performance of the new solution procedures for batching and batch scheduling is demonstrated by solving several instances of a case study from process industries.

Sustainable Land Management (SLM) Practices in Drylands: How Do They Address Desertification Threats?

Managing land sustainably is a huge challenge, especially under harsh climatic conditions such as those found in drylands. The socio-economic situation can also pose challenges, as dryland regions are often characterized by remoteness, marginality, low-productive farming, weak institutions, and even conflict. With threats from climate change, disputes over water, competing claims on land, and migration increasing worldwide, the demands for sustainable land management (SLM) measures will only increase in the future. Within the EU-funded DESIRE project, researchers and stakeholders jointly identified existing SLM technologies and approaches in 17 dryland study sites located in the Mediterranean and around the world. In order to evaluate and share this valuable SLM experience, local researchers documented the SLM technologies and approaches in collaboration with land users, utilizing the internationally recognized WOCAT questionnaires. This article provides an analysis of 30 technologies and 8 approaches, enabling an initial evaluation of how SLM addresses prevalent dryland threats, such as water scarcity, soil degradation, vegetation degradation and low production, climate change, resource use conflicts, and migration. Among the impacts attributed to the documented technologies, those mentioned most were diversified and enhanced production and better management of water and soil degradation, whether through water harvesting, improving soil moisture, or reducing runoff. Favorable local-scale cost–benefit relationships were mainly found when considered over the long term. Nevertheless, SLM was found to improve people’s livelihoods and prevent further outmigration. More field research is needed to reinforce expert assessments of SLM impacts and provide the necessary evidence-based rationale for investing in SLM.

A hybrid method for large-scale short-term scheduling of make-and-pack production processes

Due to the ongoing trend towards increased product variety, fast-moving consumer goods such as food and beverages, pharmaceuticals, and chemicals are typically manufactured through so-called make-and-pack processes. These processes consist of a make stage, a pack stage, and intermediate storage facilities that decouple these two stages. In operations scheduling, complex technological constraints must be considered, e.g., non-identical parallel processing units, sequence-dependent changeovers, batch splitting, no-wait restrictions, material transfer times, minimum storage times, and finite storage capacity. The short-term scheduling problem is to compute a production schedule such that a given demand for products is fulfilled, all technological constraints are met, and the production makespan is minimised. A production schedule typically comprises 500–1500 operations. Due to the problem size and complexity of the technological constraints, the performance of known mixed-integer linear programming (MILP) formulations and heuristic approaches is often insufficient. We present a hybrid method consisting of three phases. First, the set of operations is divided into several subsets. Second, these subsets are iteratively scheduled using a generic and flexible MILP formulation. Third, a novel critical path-based improvement procedure is applied to the resulting schedule. We develop several strategies for the integration of the MILP model into this heuristic framework. Using these strategies, high-quality feasible solutions to large-scale instances can be obtained within reasonable CPU times using standard optimisation software. We have applied the proposed hybrid method to a set of industrial problem instances and found that the method outperforms state-of-the-art methods.