Thiolato-bridged dinuclear arene ruthenium complexes and their potential as anticancer drugs

Water-soluble arene ruthenium complexes have been intensively studied as cytotoxic compounds for the last fifteen years, notably owing to the promising in vitro and in vivo evaluations of, respectively, RAPTA-C (η6-p-MeC6H4Pri)Ru(P-pta)Cl2 (pta = 1,3,5-triaza-7-phospha-tricyclo-[3.3.1.1]decane) from Dyson's laboratory, and the (η6-arene)Ru(en)Cl]+ (en = ethylenediamine, RAED) family of compounds from Sadler's laboratory. In this account we describe the discovery of thiolato-bridged dinuclear arene ruthenium complexes and highlight subsequent developments in the field, including their syntheses, structures, and the recent strategies for the design of thiolato-bridged dinuclear arene ruthenium bioconjugates.

Hydrolytic behaviour of mono-and dithiolato-bridged dinuclear arene ruthenium complexes and their interactions with biological ligands

The hydrolysis and the reactivity of two dinuclear p-cymene ruthenium monothiolato complexes, [(η6-p-MeC6H4Pri)2Ru2Cl2(µ-Cl)(µ-S-m-9-B10C2H11)] (1) and [(η6-p-MeC6H4Pri)2¬Ru2Cl2(µ-Cl)¬(µ-S¬CH2-p-C6H4-NO2)] (2), and of two dinuclear p-cymene ruthenium dithiolato complexes, [(η6-p-MeC6H4Pri)2Ru2(µ-SCH2CH2Ph)2Cl2] (3) and [(η6-p-Me¬C6H4¬Pri)2¬Ru2(S¬CH2¬C6H4-p-O¬Me)2¬Cl2] (4) towards amino acids, nucleotides, and a single-stranded DNA dodecamer were studied using NMR and mass spectrometry. In aqueous solutions at 37 °C, the monothiolato com¬plexes 1 and 2 undergo rapid hydrolysis, irrespective of the pH value, the predominant species in D2O/acetone-d6 solution at equilibrium being the neutral hydroxo complexes [(η6-p-Me¬C6H4¬Pri)2Ru2(OD)2(µ-OD)(µ-SR)]. The dithiolato complexes 3 and 4 are stable in water under acidic conditions, but undergo slow hydrolysis under neutral and basic conditions. In both cases, the cationic hydroxo complexes [(η6-p-MeC6H4Pri)2Ru2(µ-SR)2¬(OD)¬(CD3CN)]+ are the only spe¬cies observed in D2O/CD3CN at equilibrium. Surprisingly, no adducts are observed upon addition of an excess of L-methionine or L-histidine to the aqueous solutions of the complexes. Upon addition of an excess of L-cysteine, on the other hand, 1 and 2 form the unusual cationic trithiolato complexes [(η6-p-MeC6H4Pri)2¬Ru2{µ-SCH2CH(NH2)COOH}2(µ-SR)]+ containing two bridging cysteinato li¬gands, while 3 and 4 yield cationic trithiolato complexes [(η6-p-MeC6H4Pri)2Ru2[µ-SCH2CH¬(NH2)COOH](µ-SR)2]+ containing one bridging cysteinato ligand. A representative of catio¬nic trithiolato complexes containing a cysteinato bridge of this type, [(η6-p-MeC6H4Pri)2¬Ru2[µ-S¬CH2CH(NH2)COOH](µ-SCH2-p-C6H4-But)2]+ (6) could be synthesised from the di¬thiolato complex [(η6-p-Me¬C6H4¬Pri)2-Ru2(S¬CH2¬C6H4-p-But)2Cl2] (5), isolated as the tetra¬fluo¬ro¬borate salt and fully characterised. Moreover, the mono- and dithiolato complexes 1 - 4 are inert toward nucleotides and DNA, suggesting that DNA is not a target of cytotoxic thiolato-bridged arene ruthenium complexes. In contrast to the trithiolato complexes, monothiolato and dithio¬lato complexes hydrolyse and react with L-cysteine. These results may have im¬portant implications for the mode of action of thiolato-bridged dinuclear arene ruthenium drug candidates, and suggest that their modes of action are different to those of other arene ruthenium complexes.

Exploratory studies on coordination chemistry of a redox-active bridging ligand: synthesis, properties and solid state structures of the complexes

The explorative coordination chemistry of the bridging ligand TTF-PPB is presented. Its strong binding ability to Co(II) and then to Ni(II) or Cu(II) in the presence of hexafluoroacetylacetonate (hfac(-)), forming new mono-and dinuclear complexes 1-3, is described. X-ray crystallographic studies have been conducted in the case of the free ligand TTF-PPB as well as its complexes [Co(TTF-PPB)(hfac)(2)] (1) and [Co(hfac)(2)(mu-TTF-PPB)Ni(hfac)(2)] (2). Each metal ion is bonded to two bidentate hfac-anions through their oxygen atoms and two nitrogen atoms of the PPB moiety with a distorted octahedral coordination geometry. Specifically, nitrogen donor atoms of TTF-PPB adopt a cis-coordination but not in the equatorial plane, which is quite rare. Electronic absorption, photoinduced intraligand charge transfer ((1)ILCT), and electrochemical behaviour of 1-3 have been investigated. UV-Vis spectroscopy shows very strong bands in the UV region consistent with ligand centred pi-pi* transitions and an intense broad band in the visible region corresponding to a spin-allowed pi-pi* (1)ILCT transition. Upon coordination, the (1)ILCT band is bathochromically shifted by 3100, 6100 and 5900 cm(-1) on going from 1 to 3. The electrochemical studies reveal that all of them undergo two reversible oxidation and one reversible reduction processes, ascribed to the successive oxidations of the TTF moiety and the reduction of the PPB unit, respectively.

Large π-Conjugated Chromophores Derived from Tetrathiafulvalene

A large π-conjugated chromophore composed of two dipyrido[3,2-a:2′,3′-c]phenazine units directly fused to the central tetrathiafulvalene core has been prepared as a bridging ligand and its strong binding ability to Ru2+ to form a new dinuclear complex is presented. The electronic absorption and luminescence spectra and the electrochemical behavior of the free ligand and the Ru2+ complex have been investigated in detail. The free ligand shows a very strong band in the UV region consistent with ligand-centered π–π* transitions and an intense broad band in the visible region that corresponds to an intramolecular charge-transfer (ILCT) transition. Upon coordination, a metal-to-ligand charge-transfer band appears at 22520 cm−1, and the ILCT band is bathochromically shifted by 1620 cm−1. These electrochemically amphoteric chromophores have also been characterized by spectro-electrochemical methods. The oxidized radical species of the free ligand show a strong tendency to undergo aggregation, in which long-distance attractive interactions overcome the electrostatic repulsion. Moreover, these two new chromophores reveal an ILCT fluorescence with large solvent-dependent Stokes shifts and quantum efficiencies of 0.052 for the free ligand and 0.016 for its dinuclear Ru2+ complex in CH2Cl2.

Layer-by-layer grown scalable redox-active ruthenium-based molecular multilayer thin films for electrochemical applications and beyond

Here we report the first study on the electrochemical energy storage application of a surface-immobilized ruthenium complex multilayer thin film with anion storage capability. We employed a novel dinuclear ruthenium complex with tetrapodal anchoring groups to build well-ordered redox-active multilayer coatings on an indium tin oxide (ITO) surface using a layer-by-layer self-assembly process. Cyclic voltammetry (CV), UV-Visible (UV-Vis) and Raman spectroscopy showed a linear increase of peak current, absorbance and Raman intensities, respectively with the number of layers. These results indicate the formation of well-ordered multilayers of the ruthenium complex on ITO, which is further supported by the X-ray photoelectron spectroscopy analysis. The thickness of the layers can be controlled with nanometer precision. In particular, the thickest layer studied (65 molecular layers and approx. 120 nm thick) demonstrated fast electrochemical oxidation/reduction, indicating a very low attenuation of the charge transfer within the multilayer. In situ-UV-Vis and resonance Raman spectroscopy results demonstrated the reversible electrochromic/redox behavior of the ruthenium complex multilayered films on ITO with respect to the electrode potential, which is an ideal prerequisite for e.g. smart electrochemical energy storage applications. Galvanostatic charge–discharge experiments demonstrated a pseudocapacitor behavior of the multilayer film with a good specific capacitance of 92.2 F g−1 at a current density of 10 μA cm−2 and an excellent cycling stability. As demonstrated in our prototypical experiments, the fine control of physicochemical properties at nanometer scale, relatively good stability of layers under ambient conditions makes the multilayer coatings of this type an excellent material for e.g. electrochemical energy storage, as interlayers in inverted bulk heterojunction solar cell applications and as functional components in molecular electronics applications.