Oligomerization and protein-protein interactions of the sensory histidine kinase DcuS in Escherichia coli

DcuS is a membrane-integral sensory histidine kinase involved in the DcuSR two-component regulatory system in Escherichia coli by regulating the gene expression of C4-dicarboxylate metabolism in response to external stimuli. How DcuS mediates the signal transduction across the membrane remains little understood. This study focused on the oligomerization and protein-protein interactions of DcuS by using quantitative Fluorescence Resonance Energy Transfer (FRET) spectroscopy. A quantitative FRET analysis for fluorescence spectroscopy has been developed in this study, consisting of three steps: (1) flexible background subtraction to yield background-free spectra, (2) a FRET quantification method to determine FRET efficiency (E) and donor fraction (fD = [donor] / ([donor]+[acceptor])) from the spectra, and (3) a model to determine the degree of oligomerization (interaction stoichiometry) in the protein complexes based on E vs. fD. The accuracy and applicability of this analysis was validated by theoretical simulations and experimental systems. These three steps were integrated into a computer procedure as an automatic quantitative FRET analysis which is easy, fast, and allows high-throughout to quantify FRET accurately and robustly, even in living cells. This method was subsequently applied to investigate oligomerization and protein-protein interactions, in particular in living cells. Cyan (CFP) and yellow fluorescent protein (YFP), two spectral variants of green fluorescent protein, were used as a donor-acceptor pair for in vivo measurements. Based on CFP- and YFP-fusions of non-interacting membrane proteins in the cell membrane, a minor FRET signal (E = 0.06 ± 0.01) can be regarded as an estimate of direct interaction between CFP and YFP moieties of fusion proteins co-localized in the cell membrane (false-positive). To confirm if the FRET occurrence is specific to the interaction of the investigated proteins, their FRET efficiency should be clearly above E = 0.06. The oligomeric state of DcuS was examined both in vivo (CFP/YFP) and in vitro (two different donor-acceptor pairs of organic dyes) by three independent experimental systems. The consistent occurrence of FRET in vitro and in vivo provides the evidence for the homo-dimerization of DcuS as full-length protein for the first time. Moreover, novel interactions (hetero-complexes) between DcuS and its functionally related proteins, citrate-specific sensor kinase CitA and aerobic dicarboxylate transporter DctA respectively, have been identified for the first time by intermolecular FRET in vivo. This analysis can be widely applied as a robust method to determine the interaction stoichiometry of protein complexes for other proteins of interest labeled with adequate fluorophores in vitro or in vivo.

Complexes of polyelectrolytes with defined charge distance and different dendrimer counterions

Complexes of polyelectrolytes with defined charge distance and different dendrimer counterions Magdalena Chelmecka Max Planck Institute for Polymer Research; Ackermannweg 10; D-55128 Mainz ; Tel.: (+49) 06131- 379 – 226 A study of complexes in solution is of interest to investigate whether the formation of well-defined assemblies like in classical surfactant systems is possible. Aim of this thesis is to investigate the electrostatic self-assembly of linear polycations of varying charge distance with “large” counterions of varying architecture. We especially investigate the morphology of objects formed, but also their stability under salt free condition and after low molecular mass salt addition. As polycations, Poly(dialkylimino)-alkylene salts (Ionenes) I65MeBr and I25MeBr were chosen. Ionenes are synthesized via Menschutkin reaction and characterized by standard methods. Counterions are Polyamidoamine (PAMAM) dendrimers of generations G2.5, G5.5, G7.5 with -COONa surface groups and shape-persistent, Polyphenylene dendrimers of generation G1 with surface -COOH groups. A complex interplay of interactions is expected to direct the self assembly via electrostatic interaction, geometric factors, hydrophobic interaction or hydrogen bonds. Methods used for the investigation of complexes are: UV-spectroscopy, pH-metric techniques, dynamic and static light scattering, small angle neutron scattering,  potential measurements and potentiometric titration. Under certain conditions, (i.e. charge ratio of compounds, charge density of ionene and dendrimer also concentration of sample) polyelectrolyte systems composed of ionenes and dendrimers build complexes in solution. System compounds are typical polyelectrolytes, but structures which they build behave not usual for typical polyelectrolytes. In a one diffusion mode regime aggregates of about 100 nm hydrodynamic radius have been found. Such aggregates are core-shell or anisotropic core shell structures in the case of ionenes/PAMAM dendrimers complexes. These complexes are stable even at high ionic strength. In case of ionenes with poly(phenylene) dendrimers, hard sphere-like objects or spherical objects with hairy-like surface have been found in a one diffusion mode regime. Their stability at high ionic strength is lower. For the ionenes/poly(phenylene) dendrimers systems one transition point has been found from one to two diffusion processes, towards increasing ionene concentration, i.e. for the samples with fixed dendrimer concentration towards increasing ionic strength. For the diffusion profile of ionene/PAMAM dendrimers in most cases two transition regimes are observed. One at very low ionene concentration, the second one at high ionene concentrations, which again means for the samples with fixed dendrimer concentration, also at higher ionic strength. Both two mode regimes are separated by the one mode regime. As was confirmed experimentally, the one diffusion mode regime is caused by the motion of well defined assemblies. The two diffusion mode regimes are caused by the movement of different sized species in solution, large aggregates and middle-size aggregates (oligoaggregates). The location and also the number of transition points in the diffusion profiles is dependent on the ionene to dendrimer charge ratio, charge density of the compounds and concentration. No influence of the molecular mass of the ionene has been found. The aggregates are found to be charged on the surface, however this surface charge does not significantly influence the diffusion properties of the system.

A molecular approach towards tethered bilayer lipid membranes: synthesis and characterization of novel anchor lipids

Tethered bilayer lipid membranes (tBLMs) are a promising model system for the natural cell membrane. They consist of a lipid bilayer that is covalently coupled to a solid support via a spacer group. In this study, we developed a suitable approach to increase the submembrane space in tBLMs. The challenge is to create a membrane with a lower lipid density in order to increase the membrane fluidity, but to avoid defects that might appear due to an increase in the lateral space within the tethered monolayers. Therefore, various synthetic strategies and different monolayer preparation techniques were examined. Synthetical attempts to achieve a large ion reservoir were made in two directions: increasing the spacer length of the tether lipids and increasing the lateral distribution of the lipids in the monolayer. The first resulted in the synthesis of a small library of tether lipids (DPTT, DPHT and DPOT) characterized by 1H and 13C NMR, FD-MS, ATR, DSC and TGA. The synthetic strategy for their preparation includes synthesis of precursor with a double bond anchor that can be easily modified for different substrates (e.g. metal and metaloxide). Here, the double bond was modified into a thiol group suitable for gold surface. Another approach towards the preparation of homogeneous monolayers with decreased two-dimensional packing density was the synthesis of two novel anchor lipids: DPHDL and DDPTT. DPHDL is “self-diluted” tether lipid containing two lipoic anchor moieties. DDPTT has an extended lipophylic part that should lead to the preparation of diluted, leakage free proximal layers that will facilitate the completion of the bilayer. Our tool-box of tether lipids was completed with two fluorescent labeled lipid precursors with respectively one and two phytanyl chains in the hydrophobic region and a dansyl group as a fluorophore. The use of such fluorescently marked lipids is supposed to give additional information for the lipid distribution on the air-water interface. The Langmuir film balance was used to investigate the monolayer properties of four of the synthesized thiolated anchor lipids. The packing density and mixing behaviour were examined. The results have shown that mixing anchor with free lipids can homogeneously dilute the anchor lipid monolayers. Moreover, an increase in the hydrophylicity (PEG chain length) of the anchor lipids leads to a higher packing density. A decrease in the temperature results in a similar trend. However, increasing the number of phytanyl chains per lipid molecule is shown to decrease the packing density. LB-monolayers based on pure and mixed lipids in different ratio and transfer pressure were tested to form tBLMs with diluted inner layers. A combination of the LB-monolayer transfer with the solvent exchange method accomplished successfully the formation of tBLMs based on pure DPOT. Some preliminary investigations of the electrical sealing properties and protein incorporation of self-assembled DPOT and DDPTT-based tBLMs were conducted. The bilayer formation performed by solvent exchange resulted in membranes with high resistances and low capacitances. The appearance of space beneath the membrane is clearly visible in the impedance spectra expressed by a second RC element. The latter brings the conclusion that the longer spacer in DPOT and the bigger lateral space between the DDPTT molecules in the investigated systems essentially influence the electrical parameters of the membrane. Finally, we could show the functional incorporation of the small ion carrier valinomycin in both types of membranes.

The central role of Fyn kinase in axon-glial signalling and translation of myelin proteins

During central nervous system myelination, oligodendrocytes extend membrane processes towards an axonal contact site which is followed by ensheathment resulting in a compacted multilamellar myelin sheath. The formation of this axon-glial unit facilitates rapid saltatory propagation of action potentials along the axon and requires the synthesis and transport of copious amounts of lipids and proteins to the axon-glial contact site. Fyn is a member of the Src family of non receptor tyrosine kinases and inserted into the inner leaflet of the oligodendrocyte membrane by acylation. Fyn activity plays a pivotal role in the maturation of oligodendrocytes and the myelination process. It was suggested previously that Fyn kinase can be stimulated by binding of a neuronal ligand to oligodendroglial F3/ contactin, a glycosyl-phosphatidyl-inositol anchored immunoglobulin superfamily (IgSF) member protein. It could be shown here, that neuronal cell adhesion molecule L1 binds to oligodendrocytes in an F3-dependent manner and activates glial Fyn. In the search for downstream participants of this novel axon-glial signalling cascade, heterogeneous nuclear ribonucleoprotein (hnRNP) A2 was identified as a novel Fyn target in oligodendrocytes. HnRNP A2 was known to be involved in the localisation of translationally repressed myelin basic protein (MBP) mRNA by binding to a cis acting A2 response element (A2RE) present in the 3’ untranslated region. Transport of MBP mRNAs occurs in RNA-protein complexes termed RNA granules and translational repression during transport is achieved by hnRNP A2-mediated recruitment of hnRNP E1 to the granules. It could be shown here, that Fyn activity leads to enhanced translation of reporter mRNA containing a part of the 3’ UTR of MBP including the A2RE. Furthermore hnRNP E1 seems to dissociate from RNA granules in response to Fyn activity and L1 binding. These findings suggest a novel form of neuron- glial communication: Axonal L1 binding to oligodendroglial F3 activates Fyn kinase. Activated Fyn phosphorylates hnRNP A2 leading to removal of hnRNP E1 from RNA granules initiating the translation of MBP mRNA. MBP is the second most abundant myelin protein and mice lacking this protein show a severe hypomyelination phenotype. Moreover, the brains of Fyn knock out mice contain reduced MBP levels and are hypomyelinated. Hence, L1-mediated MBP synthesis via Fyn as a central molecule could be part of a regulatory mechanism required for myelinogenesis in the central nervous system.

Design, synthesis and application of ultrastable rylene dyes for fluorescent labeling of biomolecules

Studies of organic fluorescent dyes are experiencing a renaissance related to the increasing demands posed by new microscopy techniques for high resolution and high sensitivity. While in the last decade single molecule equipment and methodology has significantly advanced and in some cases reached theoretical limits (e.g. detectors approaching unity quantum yields) unstable emission from chromophores and photobleaching become more and more the bottleneck of the advancement and spreading of single-molecule fluorescence studies. The main goal of this work was the synthesis of fluorophores that are water-soluble, highly fluorescent in an aqueous environment, have a reactive group for attachment to a biomolecule and posses exceptional photostability. An approach towards highly fluorescent, water-soluble and monofunctional perylene-3,4,9,10-tetracarboxdiimide and terrylene-3,4:11,12-tetra carboxidiimide chromophores was presented. A new synthetic strategy for the desymmetrization of perylenetetracarboximides was elaborated; water-solubility was accomplished by introducing sulfonyl substituents in the phenoxy ring. Two strategies have been followed relying on either non-specific or site specific labeling. For this purpose a series of new water-soluble monofunctional perylene and terrylene dyes, bearing amine or carboxy group were prepared. The reactivity and photophysical properties of these new chromophores were studied in aqueous medium. The most suitable chromophores were further derivatized with amine or thiol reactive groups, suitable for chemical modification of proteins. The performance of the new fluorescent probes was assessed by single molecule enzyme tracking, in this case phospholipase acting on phospholipid supported layers. Phospholipase-1 (PLA-1) was labeled with N-hydroxysuccinimide ester functionalized perylene and terrylene derivatives. The purification of the conjugates was accomplished by novel convenient procedure for the removal of unreacted dye from labeled enzymes, which involves capturing excess dye with a solid support. This novel strategy for purification of bioconjugates allows convenient and fast separation of labeled proteins without the need for performing time consuming chromatographic or electrophoretic purification steps. The outstanding photostability of the dyes and, associated therewith, the extended survival times under strong illumination conditions allow a complete characterization of enzyme action on its natural substrates and even connecting enzyme mobility to catalytic activity. For site-specific attachment of the rylene dyes to proteins the chromophores were functionalized with thioesters or nitrilotriacetic acid groups. This allowed attachment of the emitters to the N-terminus of proteins by native chemical ligation or complexation with His-tagged polypeptides at the N- or C-termini, respectively. The synthesis of a water-soluble perylenebis (dicarboximide) functionalized with a thioester group was presented. This chromophore exhibits an exceptional photostability and a functional unit for site-specific labeling of proteins. The suitability of the fluorophore as a covalent label was demonstrated via native chemical ligation with protein containing N-terminal cystein residue. We exploited also oligohisitidine sequences as recognition elements for site-selective labeling. The synthesis of a new water-soluble perylene chromophore, containing a nitrilotriacetic acid functional group was demonstrated, using solution-phase and solid-phase approaches. This chromophore combines the exceptional photophysical properties of the rylene dyes and a recognition unit for site-specific labeling of proteins. An important feature of the label is the unchanged emission of the dye upon complexation with nickel ions.

Intraflagellar transport in the developing and mature vertebrate retina

Intraflagellar transport (IFT) is required for the assembly and maintenance of cilia. In this study we analyzed the subcellular localization of IFT proteins in retinal cells by correlative high-resolution immunofluorescence and immunoelectron microscopy. The rod photoreceptor cell was used as a model system to analyze protein distribution in cilia. To date the expression of IFT proteins has been described in the ciliary region without deciphering the precise spatial and temporal subcellular localization of IFT proteins, which was the focus of my work. rnThe establishment of the pre-embedding immunoelectron method was an important first step for the present doctoral thesis. Results of this work reveal the differential localization of IFT20, IFT52, IFT57, IFT88, IFT140 in sub-ciliary compartments and also their presence in non-ciliary compartments of retinal photoreceptor cells. Furthermore, the localization of IFT20, IFT52 and IFT57 in dendritic processes of non-ciliated neurons indicates that IFT protein complexes also operate in non-ciliated cells and may participate in intracellular vesicle trafficking in eukaryotic cells in general.rnIn addition, we have investigated the involvement of IFT proteins in the ciliogenesis of vertebrate photoreceptor cilia. Electron microscopy analyses revealed six morphologically distinct stages. The first stages are characterized by electron dense centriolar satellites and a ciliary vesicle, while the formation of a ciliary shaft and of the light sensitive outer segment disks are features of the later stages. IFT proteins were expressed during all stages of photoreceptor cell development and found to be associated with the ciliary apparatus. In addition to the centriole and basal body IFT proteins are present in the photoreceptor cytoplasm, associated with centriolar satellites, post-Golgi vesicles and with the ciliary vesicle. Therewith the data provide an evidence for the involvement of IFT proteins during ciliogenesis, including the formation of the ciliary vesicle and the elongation of the primary cilium of photoreceptor cells. Moreover, the cytoplasmic localization of IFT proteins in the absence of a ciliary shaft in early stages of ciliogenesis indicates roles of IFT proteins beyond their well-established function for IFT in mature cilia and flagella. rn

Die Rolle von gamma2-Adaptin im endo-lysosomalen Proteintransport von Säuger-Zellen

Ziel der Arbeit war es, die physiologische Funktion von 2-Adaptin zu charakterisieren. 2 Adaptin wurde 1998 erstmals von Takatsu et al. und Lewin et al. als mögliches Mitglied der Clathrin-Adapter-Proteinfamilie beschrieben. Seine genaue physiologische Funktion ist aber bis heute noch unklar. Bisherige Ergebnisse deuten darauf hin, das 2-Adaptin unabhängig von den AP-Komplexen wirkt. rnIn der HBV-Morphogenese ist eine spezielle Funktion von 2-Adaptin bekannt, da es dort nach seiner Ubiquitinierung durch Nedd4 als Adapter zwischen dem HBV L- und Core-Protein fungiert und Änderungen in der 2 Konzentration die HBV-Freisetzung blockieren.rn2-Adaptin besitzt neben den für die Clathrin-Adapter Proteine typischen Clathrin-bindenden Eigenschaften auch die Fähigkeit, Ubiquitin über sein UIM zu binden. Darüberhinaus wird 2-Adaptin durch seine Interaktion mit der Ubiquitin-Ligase Nedd4 selbst ubiquitiniert. Damit besitzt 2-Adaptin typische Eigenschaften eines Ubiquitin-Adapters. 2-Adaptin ist an MVBs lokalisiert und Abweichungen in der 2 Konzentration verändern die MVB-Morphologie. Zudem führt die Überexpression von 2-Adaptin zur Blockade der Freisetzung retroviraler VLPs und die 2 Depletion blockiert den lysosomalen Abbau von EGF, einem Substrat des endo-lysosomalen Proteintransports. Dies alles deutet auf eine mögliche Funktion von 2-Adaptin in diesem Transportsystem hin, welche in dieser Arbeit näher untersucht wurde.rnEs konnte gezeigt werden, dass die Depletion von 2-Adaptin den Abbau von endogenen (z.B. EGF, ubiquitinierte Proteine) und exogenen (z.B. das retrovirale MLV.gag-Polyprotein) Substraten des endo-lysosomalen Weges inhibiert, während sie bei 2 Überexpression verstärkt abgebaut werden. Alle bisher identifizierten „Substrate“ von 2 Adaptin, also Proteine, die durch überschüssiges 2-Adaptin abgebaut werden, besitzen eine Verbindung zum endo-lysosomalen System und / oder zur Ubiquitin-Maschinerie der Zelle. Weitere Hinweise auf eine Rolle von 2 Adaptin im MVB-Weg lieferte die Identifikation von Vps28 und Chmp2A als spezifische Interaktionspartner von 2-Adaptin. Über Vps28 erhält -Adaptin direkten Zugang zum ESCRT-I- und über Chmp2A zum ESCRT-III-Komplex. rnZudem konnte neben dem UIM eine PH-Domäne in 2-Adaptin als wichtige funktionelle Domäne identifiziert werden. Sie stellt das Modul für die Interaktion mit Rab7 dar, welche erstmals gezeigt werden konnte. Auch die Interaktion mit Rab7 deutet auf eine Rolle von 2 Adaptin im endo-lysosomalen Transportsystem hin, da Rab7 an späten Endosomen lokalisiert ist und u.a. die Fusion der MVBs mit den Lysosomen vermittelt. Da die Auswirkungen der Rab7-Überexpression und Depletion auf MLV.gag denen der 2 Überexpression bzw. Depletion entsprechen, liegt die Vermutung nahe, dass 2-Adaptin an einem ähnlich späten Schritt im endo-lysosomalen Transportsystem wirkt wie Rab7. Jedoch blockiert überschüssiges 2 Adaptin die ESCRT-abhängige VLP-Ausschleusung an der Plasmamembran und fungiert daher möglicherweise als negativer Regulator der ESCRT-Kaskade. Da die Überexpression von -Adaptin aber gleichzeitig zum vermehrten lysosomalen Abbau führt, ist eine Funktion von 2-Adaptin bei der MVB-Lysosomen-Fusion wenig wahrscheinlich. Einer solchen Funktion widerspricht auch, dass die intrazelluläre Konzentration von Rab7 und Vps28 durch überschüssiges 2-Adaptin reduziert werden. rnAls dritte funktionell wichtige Domäne in 2-Adaptin konnte ein LIR-Motiv identifiziert werden, über welches -Adaptin mit dem Autophagie-Markerprotein LC3 interagieren kann. Die Interaktion mit LC3, und damit die Verbindung zur Autophagie-Machinerie, liefert eine mögliche Erklärung für den vermehrten Abbau bei 2-Überexpression und den Abbau von Proteinen auf der MVB-Oberfläche. Dabei induziert 2-Adaptin nicht die Autophagie per se, sondern scheint als Autophagie-Adapter zu wirken, der seine Substrate, z.B. MVBs, selektiv dem Abbau durch Autophagie zuführt. rnrnEine mögliche Rolle von 2-Adaptin im zum Lysosom hin gerichteten zellulären Transport konnte bestätigt werden, wobei 2-Adaptin dabei verschiedene Funktionen übernimmt: rn als Ubiquitin-Adapter im endo-lysosomalen System, rn als negativer Regulator der ESCRT-Kaskadern und / oder als Autophagie-Adapter.rn

Signalerkennung und Signaltransduktion im DctA,DcuS-Sensor-Regulatorkomplex von Escherichia coli.

E. coli ist in der Lage unter aeroben sowie anaeroben Bedingungen C4-Dicarbonsäuren zur Energiekonservierung zu nutzen. Das DcuS/DcuR-Zweikomponentensystem detektiert diese und reguliert die Gene für den C4-Dicarboxylat-Transport und Metabolismus. Dabei hängt die Sensitivität der Sensorkinase DcuS für C4-Dicarbonsäuren von der Anwesenheit des aeroben Symporters DctA oder des anaeroben Antiporters DcuB ab. Diese bifunktionalen Transporter bilden mit DcuS über direkte Protein-Protein-Wechselwirkungen Sensoreinheiten. In dieser Arbeit wurden die Funktionen von DctA und DcuS im DctA/DcuS-Sensorkomplex analysiert. Mit DctA(S380D) wurde eine Variante des Transporters identifiziert, in der die regulatorische Eigenschaft von der katalytischen Funktion entkoppelt ist. Stämme von E. coli, die den DctA(S380D)/DcuS-Sensorkomplex enthielten, waren in der Lage C4-Dicarbonsäuren wahrzunehmen, obwohl die Transportfunktion von DctA inaktiviert war. Zudem wurden Unterschiede in den Substratspektren von DctA und DcuS festgestellt. Citrat, ein guter Effektor des DctA/DcuS-Sensorkomplexes, wurde durch DctA nicht gebunden oder transportiert. Anhand von Titrationsexperimenten mit variierenden DctA-Mengen wurde außerdem nachgewiesen, dass die Sensitivität von DcuS für seine Effektoren von der DctA-Konzentration abhängig ist. Es konnte gezeigt werden, dass DctA im DctA/DcuS-Sensorkomplex nicht an der Erkennung von C4-Dicarbonsäuren beteiligt ist. DcuS stellt die Signaleingangsstelle des Komplexes dar, während DctA durch seine Anwesenheit die Sensorkinase in eine funktionsbereite oder sensitive Form überführt, die auf Effektoren reagieren kann. Darüber hinaus wurde die Rolle der Transmembranhelices TM1 und TM2 von DcuS für die Funktion und Dimerisierung der Sensorkinase untersucht. Durch Sequenzanalysen wurden „SmallxxxSmall“-Motive, deren Relevanz als Dimerisierungsschnittstellen bereits in Transmembranhelices anderer Proteine nachgewiesen wurde, in TM1 sowie TM2 identifiziert. Die Homodimerisierung beider Transmembrandomänen wurde im GALLEX Two-Hybrid System nachgewiesen, wobei die TM2-TM2-Interaktion stärker war. Die Substitution G190A/G194A im SxxxGxxxG-Tandemmotiv von TM2 rief zudem einen deutlichen Funktionsverlust der Sensorkinase hervor. Dieser Aktivitätsverlust korrelierte mit Störungen der Homodimerisierung von TM2(G190A/G194A) sowie DcuS(G190A/G194A) bei bakteriellen Two-Hybrid Messungen im GALLEX- bzw. BACTH-System. Demzufolge agiert Transmembranhelix 2 mit seinem SxxxGxxxG-Sequenzmotiv als wesentliche Homodimerisierungsstelle in DcuS. Die Dimerisierung von DcuS ist essentiell für die Funktion der Histidinkinase. Zusätzlich wurde bei fluoreszenzmikroskopischen Studien durch Koexpression von DcuS bzw. DctA die zelluläre Kolokalisierung von DctA und DcuR mit DcuS sowie DauA mit DctA nachgewiesen. Die DctA/DcuS-Sensoreinheit kann demnach zum DauA/DctA/DcuS/DcuR-Komplex erweitert werden.