Quantum dot-dye hybrid systems for energy transfer applications

In this thesis, we focus on the preparation of energy transfer-based quantum dot (QD)-dye hybrid systems. Two kinds of QD-dye hybrid systems have been successfully synthesized: QD-silica-dye and QD-dye hybrid systems.rn rnIn the QD-silica-dye hybrid system, multishell CdSe/CdS/ZnS QDs were adsorbed onto monodisperse Stöber silica particles with an outer silica shell of thickness 2 - 24 nm containing organic dye molecules (Texas Red). The thickness of this dye layer has a strong effect on the total sensitized acceptor emission, which is explained by the increase in the number of dye molecules homogeneously distributed within the silica shell, in combination with an enhanced surface adsorption of QDs with increasing dye amount. Our conclusions were underlined by comparison of the experimental results with Monte-Carlo simulations, and by control experiments confirming attractive interactions between QDs and Texas Red freely dissolved in solution. rnrnNew QD-dye hybrid system consisting of multishell QDs and organic perylene dyes have been synthesized. We developed a versatile approach to assemble extraordinarily stable QD-dye hybrids, which uses dicarboxylate anchors to bind rylene dyes to QD. This system yields a good basis to study the energy transfer between QD and dye because of its simple and compact design: there is no third kind of molecule linking QD and dye; no spacer; and the affinity of the functional group to the QD surface is strong. The FRET signal was measured for these complexes as a function of both dye to QD ratio and center-to-center distance between QD and dye by controlling number of covered ZnS layers. Data showed that fluorescence resonance energy transfer (FRET) was the dominant mechanism of the energy transfer in our QD-dye hybrid system. FRET efficiency can be controlled by not only adjusting the number of dyes on the QD surface or the QD to dye distance, but also properly choosing different dye and QD components. Due to the strong stability, our QD-dye complexes can also be easily transferred into water. Our approach can apply to not only dye molecules but also other organic molecules. As an example, the QDs have been complexed with calixarene molecules and the QD-calixarene complexes also have potential for QD-based energy transfer study. rn

Electronic energy transfer processes in pi-conjugated polymers

Currently pi-conjugated polymers are considered as technologically interesting materials to be used as functional building elements for the development of the new generation of optoelectronic devices. More specifically during the last few years, poly-p-phenylene materials have attracted considerable attention for their blue photoluminescence properties. This Thesis deals with the optical properties of the most representative blue light poly-p-phenylene emitters such as poly(fluorene), oligo(fluorene), poly(indenofluorene) and ladder-type penta(phenylene) derivatives. In the present work, laser induced photoluminescence spectroscopy is used as a major tool for the study of the interdependence between the dynamics of the probed photoluminescence, the molecular structures of the prepared polymeric films and the presence of chemical defects. Complementary results obtained by two-dimensional wide-angle X-ray diffraction are reported. These findings show that the different optical properties observed are influenced by the intermolecular solid-state interactions that in turn are controlled by the pendant groups of the polymer backbone. A significant feedback is delivered regarding the positive impact of a new synthetic route for the preparation of a poly(indenofluorene) derivative on the spectral purity of the compound. The energy transfer mechanisms that operate in the studied systems are addressed by doping experiments. After the evaluation of the structure/property interdependence, a new optical excitation pathway is presented. An efficient photon low-energy up-conversion that sensitises the blue emission of poly(fluorene) is demonstrated. The observed phenomenon takes place in poly(fluorene) derivatives hosts doped with metallated octaethyl porphyrins, after quasi-CW photoexcitation of intensities in the order of kW/cm2. The up-conversion process is parameterised in terms of temperature, wavelength excitation and central metal cation in the porphyrin ring. Additionally the observation of the up-conversion is extended in a broad range of poly-p-phenylene blue light emitting hosts. The dependence of the detected up-conversion intensity on the excitation intensity and doping concentration is reported. Furthermore the dynamics of the up-conversion intensity are monitored as a function of the doping concentration. These experimental results strongly suggest the existence of triplet-triplet annihilation events into the porphyrin molecules that are subsequently followed by energy transfer to the host. After confirming the occurrence of the up-conversion in solutions, cyclic voltammetry is used in order to show that the up-conversion efficiency is partially determined from the energetic alignment between the HOMO levels of the host and the dopant.

Electronic energy transfer processes and charge carrier transport in pi-conjugated polymers

Conjugated polymers have attracted tremendous academical and industrial research interest over the past decades due to the appealing advantages that organic / polymeric materials offer for electronic applications and devices such as organic light emitting diodes (OLED), organic field effect transistors (OFET), organic solar cells (OSC), photodiodes and plastic lasers. The optimization of organic materials for applications in optoelectronic devices requires detailed knowledge of their photophysical properties, for instance energy levels of excited singlet and triplet states, excited state decay mechanisms and charge carrier mobilities. In the present work a variety of different conjugated (co)polymers, mainly polyspirobifluorene- and polyfluorene-type materials, was investigated using time-resolved photoluminescence spectroscopy in the picosecond to second time domain to study their elementary photophysical properties and to get a deeper insight into structure-property relationships. The experiments cover fluorescence spectroscopy using Streak Camera techniques as well as time-delayed gated detection techniques for the investigation of delayed fluorescence and phosphorescence. All measurements were performed on the solid state, i.e. thin polymer films and on diluted solutions. Starting from the elementary photophysical properties of conjugated polymers the experiments were extended to studies of singlet and triplet energy transfer processes in polymer blends, polymer-triplet emitter blends and copolymers. The phenomenon of photonenergy upconversion was investigated in blue light-emitting polymer matrices doped with metallated porphyrin derivatives supposing an bimolecular annihilation upconversion mechanism which could be experimentally verified on a series of copolymers. This mechanism allows for more efficient photonenergy upconversion than previously reported for polyfluorene derivatives. In addition to the above described spectroscopical experiments, amplified spontaneous emission (ASE) in thin film polymer waveguides was studied employing a fully-arylated poly(indenofluorene) as the gain medium. It was found that the material exhibits a very low threshold value for amplification of blue light combined with an excellent oxidative stability, which makes it interesting as active material for organic solid state lasers. Apart from spectroscopical experiments, transient photocurrent measurements on conjugated polymers were performed as well to elucidate the charge carrier mobility in the solid state, which is an important material parameter for device applications. A modified time-of-flight (TOF) technique using a charge carrier generation layer allowed to study hole transport in a series of spirobifluorene copolymers to unravel the structure-mobility relationship by comparison with the homopolymer. Not only the charge carrier mobility could be determined for the series of polymers but also field- and temperature-dependent measurements analyzed in the framework of the Gaussian disorder model showed that results coincide very well with the predictions of the model. Thus, the validity of the disorder concept for charge carrier transport in amorphous glassy materials could be verified for the investigated series of copolymers.

Synthesis and surface modification of semiconductor nanocrystals

The last decade has witnessed an exponential growth of activities in the field of nanoscience and nanotechnology worldwide, driven both by the excitement of understanding new science and by the potential hope for applications and economic impacts. The largest activity in this field up to date has been in the synthesis and characterization of new materials consisting of particles with dimensions in the order of a few nanometers, so-called nanocrystalline materials. [1-8] Semiconductor nanomaterials such as III/V or II/VI compound semiconductors exhibit strong quantum confinement behavior in the size range from 1 to 10 nm. Therefore, preparation of high quality semiconductor nanocrystals has been a challenge for synthetic chemists, leading to the recent rapid progress in delivering a wide variety of semiconducting nanomaterials. Semiconductor nanocrystals, also called quantum dots, possess physical properties distinctly different from those of the bulk material. Typically, in the size range from 1 to 10 nm, when the particle size is changed, the band gap between the valence and the conduction band will change, too. In a simple approximation a particle in a box model has been used to describe the phenomenon[9]: at nanoscale dimensions the degenerate energy states of a semiconductor separate into discrete states and the system behaves like one big molecule. The size-dependent transformation of the energy levels of the particles is called “quantum size-effect”. Quantum confinement of both the electron and hole in all three dimensions leads to an increase in the effective bandgap of the material with decreasing crystallite size. Consequently, both the optical absorption and emission of semiconductor nanaocrystals shift to the blue (higher energies) as the size of the particles gets smaller. This color tuning is well documented for CdSe nanocrystals whose absorption and emission covers almost the whole visible spectral range. As particle sizes become smaller the ratio of surface atoms to those in the interior increases, which has a strong impact on particle properties, too. Prominent examples are the low melting point [8] and size/shape dependent pressure resistance [10] of semiconductor nanocrystals. Given the size dependence of particle properties, chemists and material scientists now have the unique opportunity to change the electronic and chemical properties of a material by simply controlling the particle size. In particular, CdSe nanocrystals have been widely investigated. Mainly due to their size-dependent optoelectronic properties [11, 12] and flexible chemical processibility [13], they have played a distinguished role for a number of seminal studies [11, 12, 14, 15]. Potential technical applications have been discussed, too. [8, 16-27] Improvement of the optoelectronic properties of semiconductor nanocrystals is still a prominent research topic. One of the most important approaches is fabricating composite type-I core-shell structures which exhibit improved properties, making them attractive from both a fundamental and a practical point of view. Overcoating of nanocrystallites with higher band gap inorganic materials has been shown to increase the photoluminescence quantum yields by eliminating surface nonradiative recombination sites. [28] Particles passivated with inorganic shells are more robust than nanocrystals covered by organic ligands only and have greater tolerance to processing conditions necessary for incorporation into solid state structures or for other applications. Some examples of core-shell nanocrystals reported earlier include CdS on CdSe [29], CdSe on CdS, [30], ZnS on CdS, [31] ZnS on CdSe[28, 32], ZnSe on CdSe [33] and CdS/HgS/CdS [34]. The characterization and preparation of a new core-shell structure, CdSe nanocrystals overcoated by different shells (CdS, ZnS), is presented in chapter 4. Type-I core-shell structures as mentioned above greatly improve the photoluminescence quantum yield and chemical and photochemical stability of nanocrystals. The emission wavelengths of type-I core/shell nanocrystals typically only shows a small red-shift when compared to the plain core nanocrystals. [30, 31, 35] In contrast to type-I core-shell nanocrystals, only few studies have been conducted on colloidal type-II core/shell structures [36-38] which are characterized by a staggered alignment of conduction and valence bands giving rise to a broad tunability of absorption and emission wavelengths, as was shown for CdTe/CdSe core-shell nanocrystals. [36] The emission of type-II core/shell nanocrystals mainly originates from the radiative recombination of electron-hole pairs across the core-shell interface leading to a long photoluminescence lifetime. Type-II core/shell nanocrystals are promising with respect to photoconduction or photovoltaic applications as has been discussed in the literature.[39] Novel type-II core-shell structures with ZnTe cores are reported in chapter 5. The recent progress in the shape control of semiconductor nanocrystals opens new fields of applications. For instance, rod shaped CdSe nanocrystals can enhance the photo-electro conversion efficiency of photovoltaic cells, [40, 41] and also allow for polarized emission in light emitting diodes. [42, 43] Shape control of anisotropic nanocrystals can be achieved by the use of surfactants, [44, 45] regular or inverse micelles as regulating agents, [46, 47] electrochemical processes, [48] template-assisted [49, 50] and solution-liquid-solution (SLS) growth mechnism. [51-53] Recently, formation of various CdSe nanocrystal shapes has been reported by the groups of Alivisatos [54] and Peng, [55] respectively. Furthermore, it has been reported by the group of Prasad [56] that noble metal nanoparticles can induce anisotropic growth of CdSe nanocrystals at lower temperatures than typically used in other methods for preparing anisotropic CdSe structures. Although several approaches for anisotropic crystal growth have been reported by now, developing new synthetic methods for the shape control of colloidal semiconductor nanocrystals remains an important goal. Accordingly, we have attempted to utilize a crystal phase control approach for the controllable synthesis of colloidal ZnE/CdSe (E = S, Se, Te) heterostructures in a variety of morphologies. The complex heterostructures obtained are presented in chapter 6. The unique optical properties of nanocrystals make them appealing as in vivo and in vitro fluorophores in a variety of biological and chemical investigations, in which traditional fluorescence labels based on organic molecules fall short of providing long-term stability and simultaneous detection of multiple emission colours [References]. The ability to prepare water soluble nanocrystals with high stability and quantum yield has led to promising applications in cellular labeling, [57, 58] deep-tissue imaging, [59, 60] and assay labeling [61, 62]. Furthermore, appropriately solubilized nanocrystals have been used as donors in fluorescence resonance energy transfer (FRET) couples. [63-65] Despite recent progress, much work still needs to be done to achieve reproducible and robust surface functionalization and develop flexible (bio-) conjugation techniques. Based on multi-shell CdSe nanocrystals, several new solubilization and ligand exchange protocols have been developed which are presented in chapter 7. The organization of this thesis is as follows: A short overview describing synthesis and properties of CdSe nanocrystals is given in chapter 2. Chapter 3 is the experimental part providing some background information about the optical and analytical methods used in this thesis. The following chapters report the results of this work: synthesis and characterization of type-I multi-shell and type-II core/shell nanocrystals are described in chapter 4 and chapter 5, respectively. In chapter 6, a high–yield synthesis of various CdSe architectures by crystal phase control is reported. Experiments about surface modification of nanocrystals are described in chapter 7. At last, a short summary of the results is given in chapter 8.

Identifizierung und Charakterisierung von Interaktionspartnern des synaptischen Vesikelproteins Synaptophysin

Die neuronale Signalübertragung beruht auf dem synaptischen Vesikelzyklus, der durch das koordinierte Zusammenspiel von circa 400 verschiedenen Proteinen reguliert wird. Eines der Hauptproteine des synaptischen Vesikels ist Synaptophysin (SYP), das zu den tetraspan vesicle membrane proteins (TVPs) gehört. Es wird vermutet, dass es zahlreiche Funktionen der Exo- und Endozytose moduliert, wenngleich die zugrunde liegenden molekularen Mechanismen bisher größtenteils unverstanden sind. Ziel der Arbeit war daher die Identifizierung von Interaktionspartnern von SYP, um zum Verständnis der vielen ungeklärten Prozesse im synaptischen Vesikelzyklus beizutragen. Mit dem Split-Ubiquitin Yeast Two-Hybrid System, das eine direkte in vivo Interaktion von Membranproteinen erlaubt, konnten in der vorliegenden Arbeit bekannte, aber auch neue SYP-Bindungspartner identifiziert werden. Ein bekannter Interaktionspartner war Synaptobrevin2 (SYB2), das zu den stärksten im Split-Ubiquitin Y2H System identifizierten Bindeproteinen zählt. Zu den neuen starken SYP-Interaktionspartnern gehören die TVPs Synaptogyrin3 (SYNGR3) und SCAMP1. Somit konnten erstmals heterophile Interaktionen zwischen den verschiedenen TVP-Genfamilien nachgewiesen werden, die für eine universelle Funktion der TVPs sprechen. Die Validierung der im Split-Ubiquitin Y2H System ermittelten Interaktionspartner wurde auf eine Auswahl von Proteinen beschränkt, die vermutlich am synaptischen Vesikelzyklus beteiligt sind. Dabei konnte eine immunhistologische Kolokalisierung von SYP mit SYB2, SYNGR3, SCAMP1, Stathmin-like3 (STMN3), Rho family GTPase2 (RND2), Phospholipid transfer protein, Vesicle transport through interaction with t-SNAREs 1B homolog, Arfaptin2 und Profilin1 in den Synapsen-reichen Schichten der Retina beobachtet werden. Die SYP/SYB2- und SYP/SYNGR3-Komplexe konnten zudem sowohl aus Synaptosomen-Lysat als auch aus cDNA-transfizierten Epithelzellen koimmunpräzipitiert werden, wohingegen dies für die anderen Interaktionspartner nicht gelang. Da Koimmunpräzipitation die Struktur der Proteine durch Solubilisierung mit Detergenzien beeinflusst, wurden die in der Hefe beobachteten Interaktionen noch mittels Fluoreszenz-Resonanz-Energie-Transfer überprüft, mit dem Proteinwechselwirkungen in der nativen Umgebung nachgewiesen werden können. Ein positives FRET-Signal konnte für SYP mit SYB2, SYP, SYNGR3, SCAMP1, STMN3, RND2 und Arfaptin2 detektiert werden, lediglich für SYP mit Phospholipase D4 (PLD4) gelang dieser Nachweis nicht. Ferner zeigten FRET-Analysen von Synaptophysin-Mutanten, dass der zytoplasmatische C-Terminus für die Interaktion mit zytoplasmatischen und membranassoziierten Proteinen benötigt wird. Durch in vivo FRET-Studien mit der SH2-Domäne der Src-Kinase, die an phosphorylierte Tyrosine bindet, konnte eine Tyrosin-Phosphorylierung des zytoplasmatischen C-Terminus von Synaptophysin und von Synaptogyrin3 detektiert werden. Viele der neu identifizierten Synaptophysin-Interaktionspartner sind im Lipid-Metabolismus involviert. Vermutlich rekrutiert der zytoplasmatische und durch Phosphorylierung modifizierbare C-Terminus diese Partner in spezifische Lipoproteindomänen, die an der Feinabstimmung der synaptischen Vesikelendo- und -exozytose beteiligt sind.

Oligomerization and protein-protein interactions of the sensory histidine kinase DcuS in Escherichia coli

DcuS is a membrane-integral sensory histidine kinase involved in the DcuSR two-component regulatory system in Escherichia coli by regulating the gene expression of C4-dicarboxylate metabolism in response to external stimuli. How DcuS mediates the signal transduction across the membrane remains little understood. This study focused on the oligomerization and protein-protein interactions of DcuS by using quantitative Fluorescence Resonance Energy Transfer (FRET) spectroscopy. A quantitative FRET analysis for fluorescence spectroscopy has been developed in this study, consisting of three steps: (1) flexible background subtraction to yield background-free spectra, (2) a FRET quantification method to determine FRET efficiency (E) and donor fraction (fD = [donor] / ([donor]+[acceptor])) from the spectra, and (3) a model to determine the degree of oligomerization (interaction stoichiometry) in the protein complexes based on E vs. fD. The accuracy and applicability of this analysis was validated by theoretical simulations and experimental systems. These three steps were integrated into a computer procedure as an automatic quantitative FRET analysis which is easy, fast, and allows high-throughout to quantify FRET accurately and robustly, even in living cells. This method was subsequently applied to investigate oligomerization and protein-protein interactions, in particular in living cells. Cyan (CFP) and yellow fluorescent protein (YFP), two spectral variants of green fluorescent protein, were used as a donor-acceptor pair for in vivo measurements. Based on CFP- and YFP-fusions of non-interacting membrane proteins in the cell membrane, a minor FRET signal (E = 0.06 ± 0.01) can be regarded as an estimate of direct interaction between CFP and YFP moieties of fusion proteins co-localized in the cell membrane (false-positive). To confirm if the FRET occurrence is specific to the interaction of the investigated proteins, their FRET efficiency should be clearly above E = 0.06. The oligomeric state of DcuS was examined both in vivo (CFP/YFP) and in vitro (two different donor-acceptor pairs of organic dyes) by three independent experimental systems. The consistent occurrence of FRET in vitro and in vivo provides the evidence for the homo-dimerization of DcuS as full-length protein for the first time. Moreover, novel interactions (hetero-complexes) between DcuS and its functionally related proteins, citrate-specific sensor kinase CitA and aerobic dicarboxylate transporter DctA respectively, have been identified for the first time by intermolecular FRET in vivo. This analysis can be widely applied as a robust method to determine the interaction stoichiometry of protein complexes for other proteins of interest labeled with adequate fluorophores in vitro or in vivo.

Oligomerisation, localisation and interaction of the sensor histidine kinases DcuS and CitA in Escherichia coli

The two-component system DcuSR of Escherichia coli regulates gene expression of anaerobic fumarate respiration and aerobic C4-dicarboxylate uptake. C4-dicarboxylates and citrate are perceived by the periplasmic domain of the membrane-integral sensor histidine kinase DcuS. The signal is transduced across the membrane by phosphorylation of DcuS and of the response regulator DcuR, resulting in activation of DcuR and transcription of the target genes.rnIn this work, the oligomerisation of full-length DcuS was studied in vivo and in vitro. DcuS was genetically fused to derivatives of the green fluorescent protein (GFP), enabling fluorescence resonance energy transfer (FRET) measurements to detect protein-protein interactions in vivo. FRET measurements were also performed with purified His6-DcuS after labelling with fluorescent dyes and reconstitution into liposomes to study oligomerisation of DcuS in vitro. In vitro and in vivo fluorescence resonance energy transfer showed the presence of oligomeric DcuS in the membrane, which was independent of the presence of effector. Chemical crosslinking experiments allowed clear-cut evaluation of the oligomeric state of DcuS. The results showed that detergent-solubilised His6-DcuS was mainly monomeric and demonstrated the presence of tetrameric DcuS in proteoliposomes and in bacterial membranes.rnThe sensor histidine kinase CitA is part of the two-component system CitAB of E. coli, which is structurally related to DcuSR. CitAB regulates gene expression of citrate fermentation in response to external citrate. The sensor kinases DcuS and CitA were fused with an enhanced variant of the yellow fluorescent protein (YFP) and expressed in E. coli under the control of an arabinose-inducible promoter. The subcellular localisation of DcuS-YFP and CitA-YFP within the cell membrane was studied by means of confocal laser fluorescence microscopy. Both fusion proteins were found to accumulate at the cell poles. The polar accumulation was slightly increased in the presence of the stimulus fumarate or citrate, respectively, but independent of the expression level of the fusion proteins. Cell fractionation demonstrated that polar accumulation was not related to inclusion bodies formation. The degree of polar localisation of DcuS-YFP was similar to that of the well-characterised methyl-accepting chemotaxis proteins (MCPs), but independent of their presence. To enable further investigations on the function of the polar localisation of DcuS under physiological conditions, the sensor kinase was genetically fused to the flavin-based fluorescent protein Bs2 which shows fluorescence under aerobic and anaerobic conditions. The resulting dcuS-bs2 gene fusion was inserted into the chromosome of various E. coli strains.rnFurthermore, a protein-protein interaction between the related sensor histidine kinases DcuS and CitA, regulating common metabolic pathways, was detected via expression studies under anaerobic conditions in the presence of citrate and by in vivo FRET measurements.

Untersuchungen über ADAMTS13 in Gerinnungsfaktorpräparaten

Zusammenfassung rnIn der vorliegenden Arbeit wurden sechs VWF/FVIII Gerinnungsfaktorkonzentrate unterschiedlicher Chargen auf ihre ADAMTS13 Aktivität, Antigen und VWF Multimere untersucht. Grund dafür ist die Annahme, dass bei der Aufkonzentrierung des VWFs möglicherweise auch erhöhte Mengen an ADAMTS13 vorhanden sind. Wäre dies nachweisbar, könnten die entsprechenden Konzentrate auch Anwendung bei TTP Patienten finden. Neben den Gerinnungsfaktorkonzentraten wurden ebenfalls die zur Plasmapherese verwendeten Therapeutika FFP und s/d Plasma analysiert. Es soll getestet werden, ob Unterschiede hinsichtlich der Qualität zwischen den Präparaten bestehen und inwiefern die Blutgruppen eine Auswirkung auf die ADAMTS13 Aktivität/Antigen haben. Überdies wurde die Bedeutung von ADAMTS13 als wichtiges diagnostisches Merkmal im Rahmen der Gegenüberstellung von Patienten mit thrombotischen Mikroangiopathien erörtert. Alle angewandten Methoden wurden zudem kritisch miteinander verglichen und auf ihre Eignung für die klinische Diagnostik getestet. Zur Untersuchung der ADAMTS13 Aktivität kamen drei unterschiedliche Methoden zur Anwendung, die BCS-Methode nach Böhm und zwei FRET Kits (Technozym®ADAMTS13/ActifluorTMADAMTS13). Für die Bestimmung des ADAMTS13 Antigen wurde das Technozym®ADAMTS13 Kit verwendete als auch der Imubind®ELISA angewendet. Mittels der SDS-Gelelektrophorese konnten die VWF Multimere dargestellt werden. Die Untersuchungen konnten zeigen, dass nur in Haemate®P, deutlich höhere ADAMTS13 Aktivitäten (12,3% bzw. 470ng/ml) sowie ein physiologische Antigenwerte vorlagen. Die anderen Faktorkonzentrate wiesen entweder nur sehr geringe bzw. keine Aktivitäten auf. Das Antigen lag bei allen Konzentraten im nachweisbaren Bereich. Folglich ist ein Einsatz von Haemate®P bei der Therapie der TTP, insbesondere bei hereditären Formen sowie bei Kindern, die durch eine Plasmapherese stark belastet werden, und bei Schwangeren, könnten, in Erwägung zu ziehen und innerhalb der Klinik zu testen. Die Plasmapräparate FFP und Octaplas® wiesen in allen Untersuchungen ADAMTS13 Aktivitäten und Antigen im mittleren bis hohen physiologischen Bereich auf. Insbesondere bei Blutgruppe 0 ließ sich beiden Präparaten eine höhere ADAMTS13 Aktivität und Antigen gegenüber den drei anderen Blutgruppen darstellen. Insgesamt waren die interindividuellen Schwankungen bei FFP deutlich höher als bei Octaplas®, was sich in der unterschiedlichen Herstellung der Präparate begründen lässt. Octaplas® ist also genauso geeignet zur Plasmapherese bei der TTP wie FFP, kann jedoch aufgrund seiner intensiveren Virusinaktivierung eine größere Sicherheit aufweisen und stellt sich auch in der Klinik als nebenwirkungsärmer dar. Bei der Gegenüberstellung der thrombotischen Mikroangiopathien konnte gezeigt werden, dass eine verminderte ADAMTS13 Aktivität ein wichtiges Unterscheidungsmerkmal ist und auch während der Remission schon diagnostizierbar werden kann. Auf der Grundlage der labordiagnostischen Werte und dem klinischen Erscheinungsbild im akuten Schub und in der Remission konnte ein diagnostischer Algorithmus für den klinischen Alltag erstellt werden. In der Methodenvalidierung erwies sich der ActifluorTMADAMTS13 Kit als der beste Kit, da er innerhalb kürzester Zeit zuverlässige Werte in Standardeinheiten liefert. Nach neuesten Erkenntnissen, bei der eine Unterscheidung von ADAMTS13 Aktivitäten über und unter 5 % von großer prognostischer Bedeutung sind, ist die BCS-Methode nach Böhm mit einer unteren Nachweisgrenze von 6,2% zu ungenau und auch hinsichtlich ihres Zeitaufwandes eher ungünstig.rn

Molecular interaction of the human metalloprotease meprin beta with the amyloid precursor protein, ADAM10, and ADAM17 based on proteomics

Die Zinkendopeptidasen Meprin α und β sind Schlüsselkomponenten in patho(physiologischen) Prozessen wie Entzündung, Kollagenassemblierung und Angiogenese. Nach ihrer Entdeckung in murinen Bürstensaummembranen und humanen Darmepithelien, wurden weitere Expressionsorte identifiziert, z.B. Leukozyten, Krebszellen und die humane Haut. Tiermodelle, Zellkulturen und biochemische Analysen weisen auf Funktionen der Meprine in der Epithelialdifferenzierung, Zellmigration, Matrixmodellierung, Angiogenese, Bindegewebsausbildung und immunologische Prozesse hin. Dennoch sind ihre physiologischen Substrate weitgehend noch unbekannt. Massenspektrometrisch basierte Proteomics-Analysen enthüllten eine einzigartige Spaltspezifität für saure Aminosäurereste in der P1´ Position und identifizierten neue biologische Substratkandidaten. Unter den 269 extrazellulären Proteinen, die in einem Substratscreen identifiziert wurden, stellten sich das amyloid precursor protein (APP) and ADAM10 (a disintegrin and metalloprotease 10) als sehr vielversprechende Kandidaten heraus. Mehrere Schnittstellen innerhalb des APP Proteins, hervorgerufen durch verschiedenen Proteasen, haben unterschiedlichen Auswirkungen zur Folge. Die β-Sekretase BACE (β-site APP cleaving enzyme) prozessiert APP an einer Schnittstelle, welche als initialer Schritt in der Entwicklung der Alzheimer Erkrankung gilt. Toxische Aβ (Amyloid β)-Peptide werden in den extrazellulären Raum freigesetzt und aggregieren dort zu senilen Plaques. Membran verankertes Meprin β hat eine β-Sekretase Aktivität, die in einem Zellkultur-basierten System bestätigt werden konnte. Die proteolytische Effizienz von Meprin β wurde in FRET (Fluorescence Resonance Energy Transfer)-Analysen bestimmt und war um den Faktor 104 höher als die von BACE1. Weiterhin konnte gezeigt werden, dass Meprin β die ersten zwei Aminosäuren prozessiert und somit aminoterminal einen Glutamatrest freisetzt, welcher nachfolgend durch die Glutaminylzyklase in ein Pyroglutamat zykliert werden kann. Trunkierte Aβ-Peptide werden nur in Alzheimer Patienten generiert. Aufgrund einer erhöhten Hydrophobie weisen diese Peptide eine höhere Tendenz zur Aggregation auf und somit eine erhöhte Toxizität. Bis heute wurde keine Protease identifiziert, welche diese Schnittstelle prozessiert. Die Bildung der Meprin vermittelten N-terminalen APP Fragmenten wurde in vitro und in vivo detektiert. Diese N-APP Peptide hatten keine cytotoxischen Auswirkungen auf murine und humane Gehirnzellen, obwohl zuvor N-APP als Ligand für den death receptor (DR) 6 identifiziert wurde, der für axonale Degenerationsprozesse verantwortlich ist. rnIm nicht-amyloidogenen Weg prozessiert ADAM10 APP und entlässt die Ektodomäne von der Zellmembran. Wir konnten das ADAM10 Propeptid als Substrat von Meprin β identifizieren und in FRET Analysen, in vitro und in vivo zeigen, dass die Meprin vermittelte Prozessierung zu einer erhöhten ADAM10 Aktivität führt. Darüber hinaus wurde ADAM10 als Sheddase für Meprin β identifiziert. Shedding konnte durch Phorbol 12-myristate 13-acetate (PMA) oder durch das Ionophor A23187 hervorgerufen werden, sowie durch ADAM10 Inhibitoren blockiert werden. rnDiese Arbeit konnte somit ein komplexes proteolytisches Netwerk innerhalb der Neurophysiologie aufdecken, welches für die Entwicklung der Alzheimer Demenz wichtig sein kann.rn

Biologischer Lichtsammler (LHCII) für Halbleiternanokristalle (Quantum Dots)

Der light harvesting complex II (LHCII) ist ein pflanzliches Membranprotein, das in seiner trimeren Form über 40 Chlorophylle bindet. In der Pflanze kann er besonders effizient Licht sammeln und die Anregungsenergie anschließend fast verlustfrei über andere chlorophyll-bindende Proteine an die Reaktionszentren weiterleiten. Aufgrund dieser besonderen Eigenschaften war es ein Ziel dieser Arbeit, rekombinanten LHCII mit synthetischen Komponenten zu kombinieren, die zur Ladungstrennung befähigt sind. Zu diesem Zweck wurden unter anderem Halbleiternanokristalle (Quantum Dots, QDs) ausgewählt, die je nach Zusammensetzung sowohl als Energieakzeptoren als auch als Energiedonoren in Frage kamen. Durch Optimierung des Puffers gelang es, die Fluoreszenzquantenausbeute der QDs in wässriger Lösung zu erhöhen und zu stabilisieren, so dass die Grundvoraussetzungen für die spektroskopische Untersuchung verschiedener LHCII-QD-Hybridkomplexe erfüllt waren.rnUnter Verwendung bereits etablierter Affinitätssequenzen zur Bindung des LHCII an die QDs konnte gezeigt werden, dass die in dieser Arbeit verwendeten Typ-I QDs aus CdSe und ZnS sich kaum als Energie-Donoren für den LHCII eignen. Ein Hauptgrund lag im vergleichsweise kleinen Försterradius R0 von 4,1 nm. Im Gegensatz dazu wurde ein R0 von 6,4 nm für den LHCII als Donor und Typ-II QDs aus CdTe, CdSe und ZnS als Akzeptor errechnet, wodurch in diesem System eine höhere Effizienz des Energietransfers zu erwarten war. Fluoreszenzspektroskopische Untersuchungen von Hybridkomplexen aus LHCII und Typ-II QDs ergaben eine hohe Plausibilität für einen Fluoreszenz Resonanz Energietransfer (FRET) vom Lichtsammler auf die QDs. Weitere QD-Affinitätssequenzen für den LHCII wurden identifiziert und deren Bindekonstanten ermittelt. Versuche mit dem Elektronenakzeptor Methylviologen lieferten gute Hinweise auf eine LHCII-sensibilisierte Ladungstrennung der Typ-II QDs, auch wenn dies noch anhand alternativer Messmethoden wie z.B. durch transiente Absorptionsspektroskopie bestätigt werden muss. rnEin weiteres Ziel war die Verwendung von LHCII als Lichtsammler in dye-sensitized solar cells (DSSC). Geeignete dotierte TiO2-Platten wurden ermittelt, das Verfahren zur Belegung der Platten optimiert und daher mit wenig Aufwand eine hohe LHCII-Belegungsdichte erzielt. Erste Messungen von Aktionsspektren mit LHCII und einem zur Ladungstrennung fähigen Rylenfarbstoff zeigen eine, wenn auch geringe, LHCII sensibilisierte Ladungstrennung. rnDie Verwendung von Lanthanide-Binding-Tags (LBTs) ist ein potentielles Verfahren zur in vivo-Markierung von Proteinen mit Lanthanoiden wie Europium und Terbium. Diese Metalle besitzen eine überdurchschnittlich lange Lumineszenzlebensdauer, so dass sie leicht von anderen fluoreszierenden Molekülen unterschieden werden können. Im Rahmen der vorliegenden Arbeit gelang es, eine LBT in rekombinanten LHCII einzubauen und einen Lumineszenz Resonanz Energietransfer (LRET) vom Europium auf den LHCII nachzuweisen.rn

Novel porphyrin amino acids as building blocks for artificial photosynthetic reaction centers : photoinduced energy and electron transfer

This thesis reports on the synthesis and characterisation of trans-(M)AB2C meso-substituted porphyrin amino acid esters (PAr) (M = 2H or Zn) with tunable electron donating and electron withdrawing Ar substituents at B positions (Ar = 4-C6H4OnBu, 4-C6H4OMe, 2,4,6-C6H2Me3, 4-C6H4Me, C6H5, 4-C6H4F, 4-C6H4CF3, C6F5). These porphyrins were used as key building blocks for photosynthetic LHC (LHC = light-harvesting antenna complex) and RC (RC = reaction center) model compounds.rnBased on free-base or zinc(II) porphyrin amino acid esters and porphyrin acids several amide linked free-base bis(porphyrins) PAr1-PAr2 (Ar1 = 2,4,6-C6H2Me3, C6F5 and Ar2 = 2,4,6-C6H2Me3, 4-C6H4F, 4-C6H4CF3, C6F5), mono metallated bis(porphyrin) PAr1-(Zn)PAr2 (Ar1 = 2,4,6-C6H2Me3 and Ar2 =4-C6H4F) and its doubly zincated complexes (Zn)PAr1-(Zn)PAr2 were prepared. In the fluorescence spectra of free-base bis(porphyrins) the porphyrin with the strongest electron donating power of Ar substituents at B positions is the light emitting unity. The emission of mono metallated bis(porphyrin) occurs only from the free-base porphyrin building block. This phenomenon is caused by an efficient energy transfer likely via the Dexter through-bond mechanism.rnLinking of anthraquinone (Q) as electron acceptor (A) to the N-terminus of porphyrin amino acid esters ((M)PAr) and aminoferrocene (Fc) as electron donor (D) to the C-terminus of the porphyrin resulting in Q-(M)PAr-Fc triads (M = 2H or Zn, Ar = 4-C6H4OnBu, 4-C6H4OMe, 2,4,6-C6H2Me3, 4-C6H4Me, C6H5, 4-C6H4F, 4-C6H4CF3, C6F5) with tunable electron density at the porphyrin chromophore. In these triads initial oxidative PET (Q←(M)PAr) and reductive PET ((M)PAr→Fc) (PET = photoinduced electron transfer) are possible. Both processes leads to an emission quenching of (M)PAr. The efficiency of the PET pathways occurring in the Marcus normal region is controlled by the specific porphyrin electron density.rnAmide-linked conjugates PAr-Fc (Ar = 2,4,6-C6H2Me3, C6F5) and Fmoc-Fc-PAr1 (N-Fmoc-Fc = N-Fmoc protected 1,1’-ferrocene amino acid; Ar1 = C6H5, 4-C6H4F, 4-C6H4CF3, C6F5) as well as hinges PAr2-Fc-PAr1 (Ar1 = C6H5, 4-C6H4F and Ar2 = 2,4,6-C6H2Me3) were studied with respect to the reductive PET. The PET driving force (−GET) in dyads increases with the increasing electron withdrawing character of Ar substituents. Additionally, intramolecular energy transfer between porphyrins PAr1 and PAr2 is feasible in the hinges via the Förster mechanism.rn

Alpha, Omega end group functionalization of RAFT polymers based on pentafluorophenyl esters and methane thiosulfonates

While polymers with different functional groups along the backbone have intensively been investigated, there is still a challenge in orthogonal functionalization of the end groups. Such well-defined systems are interesting for the preparation of multiblock (co) polymers or polymer networks, for bio-conjugation or as model systems for examining the end group separation of isolated polymer chains. rnHere, Reversible Addition Fragmentation Chain Transfer (RAFT) polymerization was employed as method to investigate improved techniques for an a, w end group functionalization. RAFT produces polymers terminated in an R group and a dithioester-Z group, where R and Z stem from a suitable chain transfer agent (CTA). rnFor alpha end group functionalization, a CTA with an activated pentafluorophenyl (PFP) ester R group was designed and used for the polymerization of various methacrylate monomers, N-isopropylacrylamide and styrene yielding polymers with a PFP ester as a end group. This allowed the introduction of inert propyl amides, of light responsive diazo compounds, of the dyes NBD, Texas Red, or Oregon Green, of the hormone thyroxin and allowed the formation of multiblocks or peptide conjugates. rnFor w end group functionalization, problems of other techniques were overcome through an aminolysis of the dithioester in the presence of a functional methane thiosulfonate (MTS), yielding functional disulfides. These disulfides were stable under ambient conditions and could be cleaved on demand. Using MTS chemistry, terminal methyl disulfides (enabling self-assembly on planar gold surfaces and ligand substitution on gold and semiconductor nanoparticles), butynyl disulfide end groups (allowing the “clicking” of the polymers onto azide functionalized surfaces and the selective removal through reduction), the bio-target biotin, and the fluorescent dye Texas Red were introduced into polymers. rnThe alpha PFP amidation could be performed under mild conditions, without substantial loss of DTE. This way, a step-wise synthesis produced polymers with two functional end groups in very high yields. rnAs examples, polymers with an anchor group for both gold nanoparticles (AuNP) and CdSe / ZnS semi-conductor nanoparticles (QD) and with a fluorescent dye end group were synthesized. They allowed a NP decoration and enabled an energy transfer from QD to dye or from dye to AuNP. Water-soluble polymers were prepared with two different bio-target end groups, each capable of selectively recognizing and binding a certain protein. The immobilization of protein-polymer-protein layers on planar gold surfaces was monitored by surface plasmon resonance.Introducing two different fluorescent dye end groups enabled an energy transfer between the end groups of isolated polymer chains and created the possibility to monitor the behavior of single polymer chains during a chain collapse. rnThe versatility of the synthetic technique is very promising for applications beyond this work.