Eingefrorene Unordnung und Magnetismus in TiFe_1tn2-Laves-Phase-Dünnschichten

In der vorliegenden Arbeit wird die binäre intermetallische Verbindung TixFe1-x im C14 Laves-Phase Stabilitätsbereich anhand von dünnen Schichten untersucht. TiFe2 weist zwei energetisch nahezu entartete magnetische Grundzustände auf. Dies führt zu einer starken Korrelation von strukturellen und magnetischen Eigenschaften, die im Rahmen dieser Arbeit untersucht wurden. Es wurden daher epitaktische Schichten mit variabler Zusammensetzung im C14 Stabilitätsbereich auf Al2O3 (001)-orientierten Substraten mittels Molekularstrahlepitaxie präpariert und strukturell charakterisiert. Die temperatur- und magnetfeldabhängigen magnetischen Eigenschaften dieser Proben wurden mittels DC-SQUID Magnetisierungsmessungen bestimmt. Es zeigte sich eine magnetische Phasenseparation von Antiferromagnetismus und Ferromagnetismus in Abhängigkeit von der Zusammensetzung. Aus den charakteristischen Ordnungstemperaturen konnte ein magnetisches Phasendiagramm für dünne Schichten und niedrige Aligning-Felder erstellt werden. Ein Phasendiagramm für Volumenproben bei hohem Magnetfeld unterscheidet sich von diesem im Wesentlichen durch den Einfluß von Fe-Segregation in den Volumenproben, welche bei der epitaktischen Präparation nicht auftritt. Anhand von Monte-Carlo Verfahren, denen ein „quenched random disorder“ Modell zugrunde lag, wurde das Verhalten der Dünnschichtproben simuliert und daraus ein magnetisches Phasendiagramm abgeleitet. Das simulierte und experimentelle Phasendiagramm stimmt in den wesentlichen Punkten überein. Die Unterschiede sind durch die speziellen Wachstumseigenschaften von TiFe2 erklärbar. Als Ergebnis kann die magnetische Phasenseparation in diesem System als Auswirkung einer Symmetriebrechung durch Substitution in der Einheitszelle beschrieben werden.

Magnetic properties of selected 3d- and 4f-systems on alpha-Al 2 O 3 substrates

In this work the growth and the magnetic properties of the transition metals molybdenum, niobium, and iron and of the highly-magnetostrictive C15 Laves phases of the RFe2 compounds (R: Rare earth metals: here Tb, Dy, and Tb{0.3}Dy{0.7} deposited on alpha-Al2O3 (sapphire) substrates are analyzed. Next to (11-20) (a-plane) oriented sapphire substrates mainly (10-10) (m-plane) oriented substrates were used. These show a pronounced facetting after high temperature annealing in air. Atomic force microscopy (AFM) measurements reveal a dependence of the height, width, and angle of the facets with the annealing temperature. The observed deviations of the facet angles with respect to the theoretical values of the sapphire (10-1-2) and (10-11) surfaces are explained by cross section high resolution transmission electron microscopy (HR-TEM) measurements. These show the plain formation of the (10-11) surface while the second, energy reduced (10-1-2) facet has a curved shape given by atomic steps of (10-1-2) layers and is formed completely solely at the facet ridges and valleys. Thin films of Mo and Nb, respectively, deposited by means of molecular beam epitaxy (MBE) reveal a non-twinned, (211)-oriented epitaxial growth as well on non-faceted as on faceted sapphire m-plane, as was shown by X-Ray and TEM evaluations. In the case of faceted sapphire the two bcc crystals overgrow the facets homogeneously. Here, the bcc (111) surface is nearly parallel to the sapphire (10-11) facet and the Mo/Nb (100) surface is nearly parallel to the sapphire (10-1-2) surface. (211)-oriented Nb templates on sapphire m-plane can be used for the non-twinned, (211)-oriented growth of RFe2 films by means of MBE. Again, the quality of the RFe2 films grown on faceted sapphire is almost equal to films on the non-faceted substrate. For comparison thin RFe2 films of the established (110) and (111) orientation were prepared. Magnetic and magnetoelastic measurements performed in a self designed setup reveal a high quality of the samples. No difference between samples with undulated and flat morphology can be observed. In addition to the preparation of covering, undulating thin films on faceted sapphire m-plane nanoscopic structures of Nb and Fe were prepared by shallow incidence MBE. The formation of the nanostructures can be explained by a shadowing of the atomic beam due to the facets in addition to de-wetting effects of the metals on the heated sapphire surface. Accordingly, the nanostructures form at the facet ridges and overgrow them. The morphology of the structures can be varied by deposition conditions as was shown for Fe. The shape of the structures vary from pearl-necklet strung spherical nanodots with a diameter of a few 10 nm to oval nanodots of a few 100 nm length to continuous nanowires. Magnetization measurements reveal uniaxial magnetic anisotropy with the easy axis of magnetization parallel to the facet ridges. The shape of the hysteresis is depending on the morphology of the structures. The magnetization reversal processes of the spherical and oval nanodots were simulated by micromagnetic modelling and can be explained by the formation of magnetic vortices.

Electronic transport in the heavy fermion superconductors UPd 2 Al 3 and UNi 2 Al 3

This work addresses the electronical properties of the superconductors UPd2Al3 and UNi2Al3 on the basis of thin film experiments. These isotructural compounds are ideal candiates to study the interplay of magnetism and superconductivity due to the differences of their magnetically ordered states, as well as the experimental evidence for a magnetic pairing mechanism in UPd2Al3. Epitaxial thin film samples of UPd2Al3 and UNi2Al3 were prepared using UHV Molecular Beam Epitaxy (MBE). For UPd2Al3, the change of the growth direction from the intrinsic (001) to epitaxial (100) was predicted and sucessfully demonstrated using LaAlO3 substrates cut in (110) direction. With optimized deposition process parameters for UPd2Al3 (100) on LaAlO3 (110) superconducting samples with critical temperatures up to Tc = 1.75K were obtained. UPd2Al3-AlOx-Ag mesa junctions with superconducting base electrode were prepared and shown to be in the tunneling regime. However, no signatures of a superconducting density of states were observed in the tunneling spectra. The resistive superconducting transition was probed for a possible dependence on the current direction. In contrast to UNi2Al3, the existence of such feature was excluded in UPd2Al3 (100) thin films. The second focus of this work is the dependence of the resisitive transition in UNi2Al3 (100) thin films on the current direction. The experimental fact that the resisitive transition occurs at slightly higher temperatures for I║a than for I║c can be explained within a model of two weakly coupled superconducting bands. Evidence is presented for the key assumption of the two-band model, namely that transport in and out of the ab-plane is generated on different, weakly coupled parts of the Fermi surface. Main indications are the angle dependence of the superconducting transition and the dependence of the upper critical field Bc2 on current and field orientation. Additionally, several possible alternative explanations for the directional splitting of the transition are excluded in this work. An origin due to scattering on crystal defects or impurities is ruled out, likewise a relation to ohmic heating or vortex dynamics. The shift of the transition temperature as function of the current density was found to behave as predicted by the Ginzburg-Landau theory for critical current depairing, which plays a significant role in the two-band model. In conclusion, the directional splitting of the resisitive transition has to be regarded an intrinsic and unique property of UNi2Al3 up to now. Therefore, UNi2Al3 is proposed as a role model for weakly coupled multiband superconductivity. Magnetoresistance in the normalconducting state was measured for UPd2Al3 and UNi2Al3. For UNi2Al3, a negative contribution was observed close to the antiferromagnetic ordering temperature TN only for I║a, which can be associated to reduced spin-disorder scattering. In agreement with previous results it is concluded that the magnetic moments have to be attributed to the same part of the Fermi surface which generates transport in the ab-plane.

Unconventional superconductivity of the heavy fermion compound UNi 2 Al 3

The heavy fermion compound UNi2Al3 exhibits the coexistence of superconductivity and magnetic order at low temperatures, stimulating speculations about possible exotic Cooper-pairing interaction in this superconductor. However, the preparation of good quality bulk single crystals of UNi2Al3 has proven to be a non-trivial task due to metallurgical problems, which result in the formation of an UAl2 impurity phase and hence a strongly reduced sample purity. The present work concentrates on the preparation, characterization and electronic properties investigation of UNi2Al3 single crystalline thin film samples. The preparation of thin films was accomplished in a molecular beam epitaxy (MBE) system. (100)-oriented epitaxial thin films of UNi2Al3 were grown on single crystalline YAlO3 substrates cut in (010)- or (112)-direction. The high crystallographic quality of the samples was proved by several characterisation methods, such as X-ray analysis, RHEED and TEM. To study the magnetic structure of epitaxial thin films resonant magnetic x-ray scattering was employed. The magnetic order of thin the film samples, the formation of magnetic domains with different moment directions, and the magnetic correlation length were discussed. The electronic properties of the UNi2Al3 thin films in the normal and superconducting states were investigated by means of transport measurements. A pronounced anisotropy of the temperature dependent resistivity ρ(T) was observed. Moreover, it was found that the temperature of the resistive superconducting transition depends on the current direction, providing evidence for multiband superconductivity in UNi2Al3. The initial slope of the upper critical field H′c2(T) of the thin film samples suggests an unconventional spin-singlet superconducting state, as opposed to bulk single crystal data. To probe the superconducting gap of UNi2Al3 directly by means of tunnelling spectroscopy many planar junctions of different design employing different techniques were prepared. Despite the tunneling regime of the junctions, no features of the superconducting density of state of UNi2Al3 were ever observed. It is assumed that the absence of UNi2Al3 gap features in the tunneling spectra was caused by imperfections of the tunnelling contacts. The superconductivity of UNi2Al3 was probably suppressed just in a degraded surface layer, resulting in tunneling into non superconducting UNi2Al3. However, alternative explanations such as intrinsic pair breaking effects at the interface to the barrier are also possible.

Spinpolarisierte Rastertunnelmikroskopie magnetischer Nanostrukturen am Beispiel von bcc-Co/Fe(110), Fe/Mo(110) und Kupfer-Phthalocyanin/Fe(110)

In dieser Arbeit werden, nach einer Einführung in die spinpolarisierte Rastertunnelmikroskopie und -spektroskopie als experimentelle Methode zur Untersuchung magnetischer Nanostrukturen, Ergebnisse zur spinpolarisierten elektronischen Struktur in Abhängigkeit von der Kristallstruktur am Beispiel ultradünner Co-Schichten sowie in Abhängigkeit von der Magnetisierungsrichtung für ultradünne Fe-Schichten vorgestellt. Hochaufgelöste Messungen zeigen die ortsabhängige Spinpolarisation auf einem einzelnen Kupfer-Phthalocyanin Molekül. rnrnKobalt wurde durch pseudomorphes Wachstum auf den (110)-Oberflächen der kubisch raumzentrierten Metalle Chrom und Eisen deponiert. Im Unterschied zu früheren Berichten in der Literatur lassen sich nur zwei Lagen Co in der kubisch raumzentrierten (bcc) Ordnung stabilisieren. Die bcc-Co Schichten auf der Fe(110)-Oberfläche zeigen keine Anzeichen von epitaktischen Verzerrungen. rnDickere Schichten rekonstruieren in eine dicht gepackte Struktur (hcp/fcc). Durch die bcc Ordnung wird die Spinpolarisation von Kobalt auf P=62% erhöht (hcp-Co: P=45%). rnrnDie temperaturabhängige Spinreorientierung (SRT) ultradünner Filme Fe/Mo(110) wurde mit spinpolarisierter Spektroskopie untersucht. Eine Neuausrichtung der Magnetisierung aus der senkrechten [110]-Achse in die in der Ebene liegenden [001]-Achse wird bei T=(13,2+-0,5)K festgestellt, wobei es sich um einen diskontinuierlichen Reorientierungsübergang handelt, d.h. die freie Energie weist innerhalb eines bestimmten Temperaturbereichs gleichzeitig zwei Minima auf. Weiterhin wird in der Mono- und Doppellage Fe/Mo(110 eine Abhängigkeit der elektronischen Struktur von der Ausrichtung der magnetisch leichten Achse und von der Magnetisierung beobachtet. rnrnDie Untersuchung des spinpolarisierten Ladungstransports durch ein Kupfer-Phthalocyanin-Molekül auf der Fe/Mo(110) Oberfläche liefert einen wesentlichen Beitrag zum Verständnis des Spintransports an der Grenzfläche zwischen Metall und organischem Molekül. Die HOMO-LUMO-Energielücke des freien Moleküls wird durch die Wechselwirkung mit der Metalloberfläche mit Grenzflächenzuständen gefüllt. Diese Zustände reduzieren die Spinpolarisation des durch das Molekül fließenden Tunnelstroms durch einen zusätzlichen unpolarisierten Strombeitrag um einen Faktor zwei. Spinpolarisierte hybridisierte Grenzflächenzustände mit größerem Abstand zur Fermi-Energie führen in Abhängigkeit von der Position auf dem Molekül zu weiteren Beiträgen zur effektiven Spinpolarisation. Diese Untersuchungen belegen die Möglichkeit einer effektiven Spininjektion in organische Halbleiter und damit das Potential dieser Materialien für die weitere Entwicklung von Spintronik-Bauteilen.

Development of analytical methodologies for iodine species in gaseous and particulate phases of the coastal atmosphere

It has been demonstrated that iodine does have an important influence on atmospheric chemistry, especially the formation of new particles and the enrichment of iodine in marine aerosols. It was pointed out that the most probable chemical species involved in the production or growth of these particles are iodine oxides, produced photochemically from biogenic halocarbon emissions and/or iodine emission from the sea surface. However, the iodine chemistry from gaseous to particulate phase in the coastal atmosphere and the chemical nature of the condensing iodine species are still not understood. A Tenax / Carbotrap adsorption sampling technique and a thermo-desorption / cryo-trap / GC-MS system has been further developed and improved for the volatile organic iodine species in the gas phase. Several iodo-hydrocarbons such as CH3I, C2H5I, CH2ICl, CH2IBr and CH2I2 etc., have been measured in samples from a calibration test gas source (standards), real air samples and samples from seaweeds / macro-algae emission experiments. A denuder sampling technique has been developed to characterise potential precursor compounds of coastal particle formation processes, such as molecular iodine in the gas phase. Starch, TMAH (TetraMethylAmmonium Hydroxide) and TBAH (TetraButylAmmonium Hydroxide) coated denuders were tested for their efficiencies to collect I2 at the inner surface, followed by a TMAH extraction and ICP/MS determination, adding tellurium as an internal standard. The developed method has been proved to be an effective, accurate and suitable process for I2 measurement in the field, with the estimated detection limit of ~0.10 ng∙L-1 for a sampling volume of 15 L. An H2O/TMAH-Extraction-ICP/MS method has been developed for the accurate and sensitive determination of iodine species in tropospheric aerosol particles. The particle samples were collected on cellulose-nitrate filters using conventional filter holders or on cellulose nitrate/tedlar-foils using a 5-stage Berner impactor for size-segregated particle analysis. The water soluble species as IO3- and I- were separated by anion exchanging process after water extraction. Non-water soluble species including iodine oxide and organic iodine were digested and extracted by TMAH. Afterwards the triple samples were analysed by ICP/MS. The detection limit for particulate iodine was determined to be 0.10~0.20 ng•m-3 for sampling volumes of 40~100 m3. The developed methods have been used in two field measurements in May 2002 and September 2003, at and around the Mace Head Atmospheric Research Station (MHARS) located at the west coast of Ireland. Elemental iodine as a precursor of the iodine chemistry in the coastal atmosphere, was determined in the gas phase at a seaweed hot-spot around the MHARS, showing I2 concentrations were in the range of 0~1.6 ng∙L-1 and indicating a positive correlation with the ozone concentration. A seaweed-chamber experiment performed at the field measurement station showed that the I2 emission rate from macro-algae was in the range of 0.019~0.022 ng•min-1•kg-1. During these experiments, nanometer-particle concentrations were obtained from the Scanning Mobility Particle Sizer (SMPS) measurements. Particle number concentrations were found to have a linear correlation with elemental iodine in the gas phase of the seaweeds chamber, showing that gaseous I2 is one of the important precursors of the new particle formation in the coastal atmosphere. Iodine contents in the particle phase were measured in both field campaigns at and around the field measurement station. Total iodine concentrations were found to be in the range of 1.0 ~ 21.0 ng∙m-3 in the PM2.5 samples. A significant correlation between the total iodine concentrations and the nanometer-particle number concentrations was observed. The particulate iodine species analysis indicated that iodide contents are usually higher than those of iodate in all samples, with ratios in the range of 2~5:1. It is possible that those water soluble iodine species are transferred through the sea-air interface into the particle phase. The ratio of water soluble (iodate + iodide) and non-water soluble species (probably iodine oxide and organic iodine compounds) was observed to be in the range of 1:1 to 1:2. It appears that higher concentrated non-water soluble species, as the products of the photolysis from the gas phase into the particle phase, can be obtained in those samples while the nucleation events occur. That supports the idea that iodine chemistry in the coastal boundary layer is linked with new particle formation events. Furthermore, artificial aerosol particles were formed from gaseous iodine sources (e.g. CH2I2) using a laboratory reaction-chamber experiment, in which the reaction constant of the CH2I2 photolysis was calculated to be based upon the first order reaction kinetic. The end products of iodine chemistry in the particle phase were identified and quantified.