9 resultados para Light and electron microscopy
em ArchiMeD - Elektronische Publikationen der Universität Mainz - Alemanha
Resumo:
Centrine sind kleine Ca2+-bindende Proteine aus der Familie der EF-Hand Proteine. Erstmals wurden Centrine als Hauptbestandteil der kontraktilen Flagellenwurzeln von Grünalgen beschrieben. Mittlerweile konnten Centrine in nahezu allen eukaryotischen Organismen nachgewiesen werden. In Säugetieren wurden bis zu vier Isoformen identifiziert, die an Centrosomen oder davon abgeleiteten Strukturen, wie Spindelpolkörpern und Basalkörper, aber auch in Übergangszonen von Cilien exprimiert werden. In der vorliegenden Arbeit konnte gezeigt werden, dass die Centrine im zellulären Kontext der Photorezeptorzellen nicht nur durch die Bindung von Ca2+ reguliert werden, sondern auch durch reversible Phosphorylierungen. Die Phosphorylierung der Centrin-Isoformen findet in der Retina von Vertebraten lichtabhängig während der Dunkeladaption statt. Die Protein Kinase CK2 (CK2) ist für die beschriebenen lichtabhängigen Phosphorylierungen hauptverantwortlich. Obwohl alle Centrin-Isoformen mehrere mögliche Zielsequenzen für die CK2 besitzen, kommt es nur zur Phosphorylierung einer einzigen Aminosäure in Cen1p, Cen2p und Cen4p. Im Gegensatz dazu stellt die Isoform Cen3p kein Substrat für die CK2 dar. Zudem wurden hier erstmals Phosphatasen identifiziert, die in der Lage sind Centrine zu dephosphorylieren. Die Dephosphorylierung durch die PP2Cund PP2C ist sehr spezifisch, da keine andere Phosphatase der Retina die CK2-vermittelte Phosphorylierung der Centrine rückgängig machen kann. Hoch auflösende licht- und elektronenmikroskopische Analysen zeigten erstmals, dass die Centrine sowohl mit der CK2 als auch mit der PP2C im Verbindungscilium der Photorezeptorzellen colokalisiert sind. Cen1p und CK2 sind in der Lage, direkt an Mikrotubuli zu binden, was die notwendige räumliche Nähe zwischen Enzymen und Substrat herstellt. Bisherige Arbeiten zeigten, dass alle Centrine Ca2+-abhängig mit dem visuellen G-Protein Transducin interagieren. Diese Wechselwirkung dürfte an der Regulation der lichtabhängigen Translokation des visuellen G-Proteins Transducin zwischen dem Außen- und dem Innensegment der Photorezeptorzelle beteiligt sein. In der vorliegenden Arbeit zeigten Interaktionsstudien, dass die Bindungsaffinitäten der Centrine für Transducin durch die CK2-vermittelte Phosphorylierung drastisch verringert wurden. Dieser beobachtete Effekt beruht auf deutlich verringerten Ca2+-Affinitäten der Centrin-Isoformen nach der CK2-vermittelten Phosphorylierung. In der vorliegenden Arbeit wurde ein neuartiger Regulationsmechanismus der Centrine in den Photorezeptorzellen der Vertebraten beschrieben. Centrine werden nicht nur durch Ca2+-Bindung zur Bildung von Protein Komplexen stimuliert, sondern durch die Phosphorylierung zum Auflösen dieser Komplexe angeregt. Damit reguliert die CK2-vermittelte, lichtabhängige Phosphorylierung der Centrine möglicherweise ebenfalls die adaptive Translokation des visuellen G-Proteins Transducin zwischen dem Außen- und Innensegment der Photorezeptorzellen.
Resumo:
Structure characterization of nanocrystalline intermediates and metastable phases is of primary importance for a deep understanding of synthetic processes undergoing solid-to-solid state phase transitions. Understanding the evolution from the first nucleation stage to the final synthetic product supports not only the optimization of existing processes, but might assist in tailoring new synthetic paths. A systematic investigation of intermediates and metastable phases is hampered because it is impossible to produce large crystals and only in few cases a pure synthetic product can be obtained. Structure investigation by X-ray powder diffraction methods is still challenging on nanoscale, especially when the sample is polyphasic. Electron diffraction has the advantage to collect data from single nanoscopic crystals, but is limited by data incompleteness, dynamical effects and fast deterioration of the sample under the electron beam. Automated diffraction tomography (ADT), a recently developed technique, making possible to collect more complete three-dimensional electron diffraction data and to reduce at the same time dynamical scattering and beam damage, thus allowing to investigate even beam sensitive materials (f.e. hydrated phases and organics). At present, ADT is the only technique able to deliver complete three-dimensional structural information from single nanoscopic grains, independently from other surrounding phases. Thus, ADT is an ideal technique for the study of on-going processes where different phases exist at the same time and undergo several structural transitions. In this study ADT was used as the main technique for structural characterization for three different systems and combined subsequently with other techniques, among which high-resolution transmission electron microscopy (HRTEM), cryo-TEM imaging, X-ray powder diffraction (XRPD) and energy disperse X-ray spectroscopy (EDX).rnAs possible laser host materials, i.e. materials with a broad band emission in the near-infrared region, two unknown phases were investigated in the ternary oxide system M2O-Al2O3-WO3 (M = K, Na). Both phases exhibit low purity as well as non-homogeneous size distribution and particle morphology. The structures solved by ADT are also affected by pseudo-symmetry. rnSodium titanate nanotubes and nanowires are both intermediate products in the synthesis of TiO2 nanorods which are used as additives to colloidal TiO2 film for improving efficiency of dye-sensitized solar cells (DSSC). The structural transition from nantubes to nanowires was investigated in a step by step time-resolved study. Nanowires were discovered to consist of a hitherto unknown phase of sodium titanate. This new phase, typically affected by pervasive defects like mutual layer shift, was structurally determined ab-initio on the basis of ADT data. rnThe third system is related with calcium carbonate nucleation and early crystallization. The first part of this study is dedicated to the extensive investigations of calcium carbonate formation in a step by step analysis, up to the appearance of crystalline individua. The second part is dedicated to the structure determination by ADT of the first-to-form anhydrated phase of CaCO3: vaterite. An exhaustive structure analysis of vaterite had previously been hampered by diffuse scattering, extra periodicities and fast deterioration of the material under electron irradiation. rn
Resumo:
Three-dimensional electron microscopy (3-D EM) provides a framework for the analysis of large protein quaternary structures. The advantage over the generally higher resolving meth- od of X-ray crystallography is the embedding of the proteins in their physiological environ- ment. However, results of the two methods can be combined to obtain superior structural information. In this work, three different protein types – (i) Myriapod hemocyanin, (ii) vesi- cle-inducing protein in plastids 1 (Vipp1) and (iii) acetylcholine-binding protein (AChBP) – were structurally analyzed by 2-D and 3-D EM and, where possible, functionally interpreted.rnMyriapod hemocyanins have been previously shown to be 6x6-meric assemblies that, in case of Scutigera coleoptrata hemocyanin (ScoHc), show two 3x6-mer planes whith a stag- gering angle of approximately 60°. Here, previously observed structural differences between oxy- and deoxy-ScoHc could be substantiated. A 4° rotation between hexamers of two dif- ferent 3x6-mer planes was measured, which originates at the most central inter-hexamer in- terface. Further information about allosteric behaviour in myriapod hemocyanin was gained by analyzing Polydesmus angustus hemocyanin (PanHc), which shows a stable 3x6-mer and divergent histidine patterns in the inter-hexamer interfaces when compared to ScoHc. Both findings would conclusively explain the very different oxygen binding properties of chilopod and diplopod hemocyanin.rnVipp1 is a protein found in cyanobacteria and higher plants which is essential for thyla- koid membrane function and forms highly variable ring-shaped structures. In the course of this study, the first 3-D analysis of Vipp1 was conducted and yielded reconstructions of six differently sized Vipp1 rings from negatively stained images at resolutions between 20 to 30 Å. Furthermore, mutational analyses identified specific N-terminal amino acids that are essential for ring formation. On the basis of these analyses and previously published results, a hypothetical model of the Vipp1 tertiary and quaternary structure was generated.rnAChBP is a water-soluble protein in the hemolymph of mollusks. It is a structural and functional homologue of the ligand-binding domain of nicotinic acetylcholine receptors. For the freshwater snail Biomphalaria glabrata, we previously described two types of AChBP (BgAChBP1 and BgAChBP2). In this work, a 6 Å 3-D reconstruction of native BgAChBP is presented, which shows a dodecahedral assembly that is unprecedented for an AChBP. Single particle analysis of recombinantely expressed BgAChBP types led to preliminary results show- ing a dodecahedral assembly of BgAChBP1 and a dipentameric assembly of BgAChBP2. This indicates divergent biological functions of the two types.
Resumo:
In the present work, the formation and migration of point defects induced by electron irradiation in carbon nanostructures, including carbon onions, nanotubes and graphene layers, were investigated by in-situ TEM. The mobility of carbon atoms normal to the layers in graphitic nanoparticles, the mobility of carbon interstitials inside SWCNTs, and the migration of foreign atoms in graphene layers or in layers of carbon nanotubes were studied. The diffusion of carbon atoms in carbon onions was investigated by annealing carbon onions and observing the relaxation of the compressed clusters in the temperature range of 1200 – 2000oC. An activation energy of 5.0±0.3 eV was obtained. This rather high activation energy for atom exchange between the layers not only prevents the exchange of carbon atoms between the layers at lower temperature but also explains the high morphological and mechanical stability of graphite nanostructures. The migration of carbon atoms in SWCNTs was investigated quantitatively by cutting SWCNT bundles repeatedly with a focused electron beam at different temperatures. A migration barrier of about 0.25 eV was obtained for the diffusion of carbon atoms inside SWCNTs. This is an experimental confirmation of the high mobility of interstitial atoms inside carbon nanotubes, which corroborates previously developed theoretical models of interstitial diffusivity. Individual Au and Pt atoms in one- or two-layered graphene planes and MWCNTs were monitored in real time at high temperatures by high-resolution TEM. The direct observation of the behavior of Au and Pt atoms in graphenic structures in a temperature range of 600 – 700°C allows us to determine the sites occupied by the metal atoms in the graphene layer and the diffusivities of the metal atoms. It was found that metal atoms were located in single or multiple carbon vacancies, not in off-plane positions, and diffused by site exchange with carbon atoms. Metal atoms showed a tendency to form clusters those were stable for a few seconds. An activation energy of around 2.5 eV was obtained for the in-plane migration of both Au and Pt atoms in graphene (two-dimensional diffusion). The rather high activation energy indicates covalent bonding between metal and carbon atoms. Metal atoms were also observed to diffuse along the open edge of graphene layers (one-dimensional diffusion) with a slightly lower activation energy of about 2.3 eV. It is also found that the diffusion of metal atoms in curved graphenic layers of MWCNTs is slightly faster than in planar graphene.
Resumo:
Die Hämocyanine der Cephalopoden Nautilus pompilius und Sepia officinalis sorgen für den Sauerstofftransport zwischen den Kiemen und den Geweben. Sie bestehen aus einem zylindrischen Dekamer mit interner Kragenstruktur. Während eine Untereinheit (also eine Polypeptidkette) bei NpH aus sieben paralogen funktionellen Domänen (FU-a bis FU-g) besteht, führte ein Genduplikationsereignis der FU-d zu acht FUs in SoH (a, b, c, d, d´, e, f, g). In allen Mollusken Hämocyaninen bilden sechs dieser FUs den äußeren Ring und die restlichen die interne Kragenstruktur. rnrnIn dieser Arbeit wurde ein dreidimensionales Modell des Hämocyanins von Sepia officinalis (SoH) erstellt. Die Rekonstruktion, mit einer Auflösung von 8,8Å (FSC=0,5), erlaubt das Einpassen von Homolologiemodellen und somit das Erstellen eines molekularen Modells mit pseudo atomarer Auflösung. Des Weiteren wurden zwei Rekonstruktionen des Hämocyanins von Nautilus pompilius (NpH) in verschiedenen Oxygenierungszuständen erstellt. Die auf 10 und 8,1Å aufgelösten Modelle zeigen zwei verschiedene Konformationen des Proteins. Daraus ließ sich eine Modellvorstellung über die allosterische Funktionsweise ableiten. Die hier erreichte Auflösung von 8Å ist die momentan höchste eines Molluskenhämocyanins. rnAuf Grundlage des molekularen Modells von SoH konnte die Topologie des Proteins aufgeklärt werden. Es wurde gezeigt, dass die zusätzliche FU-d´ in den Kragen integriert ist und somit die prinzipielle Wandarchitektur aller Mollusken Hämocyanine identisch ist. Wie die Analyse des erstellten molekularen Modells zeigt werden sind die beiden Isoformen (SoH1 und SoH2) in den Bereichen der Interfaces nahezu identisch; auch der Vergleich mit NpH zeigt grosse Übereinstimmungen. Des weiteren konnte eine Fülle von Informationen bezüglich der allosterischen Signalübertragung innerhalb des Moleküls gewonnen werden. rnDer Versuch, NpH in verschiedenen Oxygenierungszuständen zu zeigen, war erfolgreich. Die Datensätze, die unter zwei atmosphärischen Bedingungen präpariert wurden, führten reproduzierbar zu zwei unterschiedlichen Rekonstruktionen. Dies zeigt, daß der hier entwickelte experimentelle Ansatz funktioniert. Er kann nun routinemäßig auf andere Proteine angewandt werden. Wie der strukturelle Vergleich zeigte, verändert sich die Orientierung der FUs durch die Oxygenierung leicht. Dies wiederum beeinflusst die Anordnung innerhalb der Interfaces sowie die Abstände zwischen den beteiligten Aminosäuren. Aus dieser Analyse konnte eine Modellvorstellung zum allosterischen Signaltransfer innerhalb des Moleküls abgeleitet werden, die auf einer Umordnung von Salzbrücken basiert.
Resumo:
This thesis reports on the synthesis and characterisation of trans-(M)AB2C meso-substituted porphyrin amino acid esters (PAr) (M = 2H or Zn) with tunable electron donating and electron withdrawing Ar substituents at B positions (Ar = 4-C6H4OnBu, 4-C6H4OMe, 2,4,6-C6H2Me3, 4-C6H4Me, C6H5, 4-C6H4F, 4-C6H4CF3, C6F5). These porphyrins were used as key building blocks for photosynthetic LHC (LHC = light-harvesting antenna complex) and RC (RC = reaction center) model compounds.rnBased on free-base or zinc(II) porphyrin amino acid esters and porphyrin acids several amide linked free-base bis(porphyrins) PAr1-PAr2 (Ar1 = 2,4,6-C6H2Me3, C6F5 and Ar2 = 2,4,6-C6H2Me3, 4-C6H4F, 4-C6H4CF3, C6F5), mono metallated bis(porphyrin) PAr1-(Zn)PAr2 (Ar1 = 2,4,6-C6H2Me3 and Ar2 =4-C6H4F) and its doubly zincated complexes (Zn)PAr1-(Zn)PAr2 were prepared. In the fluorescence spectra of free-base bis(porphyrins) the porphyrin with the strongest electron donating power of Ar substituents at B positions is the light emitting unity. The emission of mono metallated bis(porphyrin) occurs only from the free-base porphyrin building block. This phenomenon is caused by an efficient energy transfer likely via the Dexter through-bond mechanism.rnLinking of anthraquinone (Q) as electron acceptor (A) to the N-terminus of porphyrin amino acid esters ((M)PAr) and aminoferrocene (Fc) as electron donor (D) to the C-terminus of the porphyrin resulting in Q-(M)PAr-Fc triads (M = 2H or Zn, Ar = 4-C6H4OnBu, 4-C6H4OMe, 2,4,6-C6H2Me3, 4-C6H4Me, C6H5, 4-C6H4F, 4-C6H4CF3, C6F5) with tunable electron density at the porphyrin chromophore. In these triads initial oxidative PET (Q←(M)PAr) and reductive PET ((M)PAr→Fc) (PET = photoinduced electron transfer) are possible. Both processes leads to an emission quenching of (M)PAr. The efficiency of the PET pathways occurring in the Marcus normal region is controlled by the specific porphyrin electron density.rnAmide-linked conjugates PAr-Fc (Ar = 2,4,6-C6H2Me3, C6F5) and Fmoc-Fc-PAr1 (N-Fmoc-Fc = N-Fmoc protected 1,1’-ferrocene amino acid; Ar1 = C6H5, 4-C6H4F, 4-C6H4CF3, C6F5) as well as hinges PAr2-Fc-PAr1 (Ar1 = C6H5, 4-C6H4F and Ar2 = 2,4,6-C6H2Me3) were studied with respect to the reductive PET. The PET driving force (−GET) in dyads increases with the increasing electron withdrawing character of Ar substituents. Additionally, intramolecular energy transfer between porphyrins PAr1 and PAr2 is feasible in the hinges via the Förster mechanism.rn
Resumo:
We report on a strategy to prepare metal oxides including binary oxide and mixed metal oxide (MMO) in form of nanometer-sized particles using polymer as precursor. Zinc oxide nanoparticles are prepared as an example. The obtained zinc polyacrylate precursor is amorphous as confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The conversion from polymer precursor to ZnO nanocrystals by thermal pyrolysis was investigated by means of XRD, thermogravimetric analysis (TGA) and electron microscopy. The as-synthesized ZnO consists of many individual particles with a diameter around 40 nm as shown by scanning electron microscopy (SEM). The photoluminescence (PL) and electron paramagnetic (EPR) properties of the material are investigated, too. Employing this method, ZnO nanocrystalline films are fabricated via pyrolysis of a zinc polyacrylate precursor film on solid substrate like silicon and quartz glass. The results of XRD, absorption spectra as well as TEM prove that both the ZnO nanopowder and film undergo same evolution process. Comparing the PL properties of films fabricated in different gas atmosphere, it is assigned that the blue emission of the ZnO films is due to crystal defect of zinc vacancy and green emission from oxygen vacancy. Two kinds of ZnO-based mixed metal oxide (Zn1-xMgxO and Zn1-xCoxO) particles with very precise stoichiometry are prepared by controlled pyrolysis of the corresponding polymer precursor at 550 oC. The MMO crystal particles are typically 20-50 nm in diameter. Doping of Mg in ZnO lattice causes shrinkage of lattice parameter c, while it remains unchanged with Co incorporation. Effects of bandgap engineering are seen in the Mg:ZnO system. The photoluminescence in the visible is enhanced by incorporation of magnesium on zinc lattice sites, while the emission is suppressed in the Co:ZnO system. Magnetic property of cobalt doped-ZnO is checked too and ferromagnetic ordering was not found in our samples. An alternative way to prepare zinc oxide nanoparticles is presented upon calcination of zinc-loaded polymer precursors, which is synthesized via inverse miniemulsion polymerization of the mixture of the acrylic acid and zinc nitrate. The as-prepared ZnO product is compared with that obtained from polymer-salt complex method. The obtained ZnO nanoparticles undergo surface modification via a phosphate modifier applying ultrasonication. The morphology of the modified particles is checked by SEM. And stability of the ZnO nanoparticles in aqueous dispersion is enhanced as indicated by the zeta-potential results.
Resumo:
Schon 1904 beschrieb Schulze den Aufbau von Silikatnadeln des Schwammes Monorhaphis chuni, eines Mitglieds der zweiten Familie von biosilifizierenden Schwämmen, den Hexactinelliden (Glasschwämmen). Weitergehende morphologische Untersuchungen und biochemische Analysen insbesondere mit modernen Methoden wurden an Hexactinelliden bisher kaum durchgeführt. Ziel der vorliegenden Arbeit bestand deshalb darin, Untersuchungen zur Morphologie, der chemischen Zusammensetzung, der Verteilung und Charakterisierung der beteiligten anorganischen und organischen Komponenten sowie einen molekularbiologischer Nachweis der Existenz von Silicatein in Hexactinelliden durchzuführen. Für diese Untersuchungen wurden zwei Spezies verwendet: Monorhaphis chuni und Crateromorpha meyeri. Mittels Elektronen-Mikrosonden-Technik wurde an Querschnitten der Pfahlnadel von M. chuni die Verteilung der Elemente innerhalb der Nadel untersucht. Am äußeren Rand der Nadel (150 µm) traten im Vergleich zur Nadelmitte prägnante Unterschiede in der Konzentration von Kaliumoxid und Natriumoxid auf. Diese Ergebnisse deuten auf das Vorhandensein eines ähnlichen Transportsystems zur Anreicherung von Silizium/Silikat bei der Nadelbildung hin, wie es bereits in S. domuncula bekannt ist. Mit elektronen- und lichtmikroskopischen Untersuchungen wurden die organischen Substanzen der Silikatnadel nachgewiesen und deren Verteilung innerhalb dieser Nadeln analysiert. In der lamellaren Zone befindet sich, eine säurelabile organische Netzstruktur, sowie eine, die Silikatschichten durchspannende, säulenähnliche Struktur. Im Axialzylinder zeigt das organische Material eine leicht verzweigte fibrilläre Anordnung. Mit biochemischen Verfahren wurden die organischen Komponenten der Nadeln detaillierter untersucht. Mehrere Proteine mit Molekulargewichten von 17, 24, 27 ,30, 36 und 70 kDa wurden durch gelelektrophoretische Analysen von Material der Pfahlnadel identifiziert. Die Analyse isolierter Anteile der lamellaren Zone zeigte ausschließlich ein 27 kDa Protein. Die restlichen Proteinbanden konnten hier nicht nachgewiesen werden. Das 27 kDa Protein reagierte im Westernblot mit Antikörpern gegen Silicatein aus S. domuncula. Ein weiteres Protein wurde näher charakterisert. Ein positiver Agglutinationsassay wies ein lectinähnliches Molekül innerhalb der Nadeln nach, wie es aus S. domuncula bekannt ist. Nach einer Deglycolysierung der Proteine reduzierte sich das scheinbare Molekulargewicht der 36 kDa Bande auf 30 kDa. Durch molekularbiologische Untersuchungen wurde erstmals in Hexactinelliden die Existenz von Silicatein nachgewiesen. Nach Isolierung der Gesamt-RNA von Crateromorpha meyeri, RT-PCR und Amplifizierung mit silicateinspezifischen Primern wurde eine 549 kBp Nukleotidsequenz gefunden, die auf Aminosäureebene starke Homologien (76% identische Aminosäuren) zu bekannten Silicateinen der Demospongia aufweist. Die Aminosäuren der katalytische Triade des Silicateins, essenziell für die enzymatische Katalyse des Enzyms, sind an den selben Positionen wie bei bekannten Silicateinen vorhanden.