Digital design of an EPC Gen2 controller for enhanced RFID tags

This thesis presents an improvement of the long range battery-less UHF RFID platform for sensor applications which is based on the open source Wireless Identification and Sensing Platform (WISP) project. The purpose of this work is to design a digital logic that performs the RFID EPC gen2 protocol communication, is able to acquire information by sensors and provide an accurate estimation of tag location ensuring low energy consumption. This thesis will describe the hardware architecture on which the digital logic was inserted, the Verilog code developed, the methods by which the digital logic was tested and an explorative study of chip synthesis on Cadence.

Locator id separation protocol

Locator ID Separation Protocolo Tesi di Laurea in Reti di calcolatori

Optimisation of chemical lysis protocol for point-of-care leukocyte differentiation

The full blood cell (FBC) count is the most common indicator of diseases. At present hematology analyzers are used for the blood cell characterization, but, recently, there has been interest in using techniques that take advantage of microscale devices and intrinsic properties of cells for increased automation and decreased cost. Microfluidic technologies offer solutions to handling and processing small volumes of blood (2-50 uL taken by finger prick) for point-of-care(PoC) applications. Several PoC blood analyzers are in use and may have applications in the fields of telemedicine, out patient monitoring and medical care in resource limited settings. They have the advantage to be easy to move and much cheaper than traditional analyzers, which require bulky instruments and consume large amount of reagents. The development of miniaturized point-of-care diagnostic tests may be enabled by chip-based technologies for cell separation and sorting. Many current diagnostic tests depend on fractionated blood components: plasma, red blood cells (RBCs), white blood cells (WBCs), and platelets. Specifically, white blood cell differentiation and counting provide valuable information for diagnostic purposes. For example, a low number of WBCs, called leukopenia, may be an indicator of bone marrow deficiency or failure, collagen- vascular diseases, disease of the liver or spleen. The leukocytosis, a high number of WBCs, may be due to anemia, infectious diseases, leukemia or tissue damage. In the laboratory of hybrid biodevices, at the University of Southampton,it was developed a functioning micro impedance cytometer technology for WBC differentiation and counting. It is capable to classify cells and particles on the base of their dielectric properties, in addition to their size, without the need of labeling, in a flow format similar to that of a traditional flow cytometer. It was demonstrated that the micro impedance cytometer system can detect and differentiate monocytes, neutrophils and lymphocytes, which are the three major human leukocyte populations. The simplicity and portability of the microfluidic impedance chip offer a range of potential applications in cell analysis including point-of-care diagnostic systems. The microfluidic device has been integrated into a sample preparation cartridge that semi-automatically performs erythrocyte lysis before leukocyte analysis. Generally erythrocytes are manually lysed according to a specific chemical lysis protocol, but this process has been automated in the cartridge. In this research work the chemical lysis protocol, defined in the patent US 5155044 A, was optimized in order to improve white blood cell differentiation and count performed by the integrated cartridge.

Multicentre study for a robust protocol in single-voxel spectroscopy: quantification of MRS signals by time-domain fitting algorithms

Magnetic Resonance Spectroscopy (MRS) is an advanced clinical and research application which guarantees a specific biochemical and metabolic characterization of tissues by the detection and quantification of key metabolites for diagnosis and disease staging. The "Associazione Italiana di Fisica Medica (AIFM)" has promoted the activity of the "Interconfronto di spettroscopia in RM" working group. The purpose of the study is to compare and analyze results obtained by perfoming MRS on scanners of different manufacturing in order to compile a robust protocol for spectroscopic examinations in clinical routines. This thesis takes part into this project by using the GE Signa HDxt 1.5 T at the Pavillion no. 11 of the S.Orsola-Malpighi hospital in Bologna. The spectral analyses have been performed with the jMRUI package, which includes a wide range of preprocessing and quantification algorithms for signal analysis in the time domain. After the quality assurance on the scanner with standard and innovative methods, both spectra with and without suppression of the water peak have been acquired on the GE test phantom. The comparison of the ratios of the metabolite amplitudes over Creatine computed by the workstation software, which works on the frequencies, and jMRUI shows good agreement, suggesting that quantifications in both domains may lead to consistent results. The characterization of an in-house phantom provided by the working group has achieved its goal of assessing the solution content and the metabolite concentrations with good accuracy. The goodness of the experimental procedure and data analysis has been demonstrated by the correct estimation of the T2 of water, the observed biexponential relaxation curve of Creatine and the correct TE value at which the modulation by J coupling causes the Lactate doublet to be inverted in the spectrum. The work of this thesis has demonstrated that it is possible to perform measurements and establish protocols for data analysis, based on the physical principles of NMR, which are able to provide robust values for the spectral parameters of clinical use.

Extracting FSA descriptions of robot behaviours from the dynamics of automatically designed controller networks

Automatic design has become a common approach to evolve complex networks, such as artificial neural networks (ANNs) and random boolean networks (RBNs), and many evolutionary setups have been discussed to increase the efficiency of this process. However networks evolved in this way have few limitations that should not be overlooked. One of these limitations is the black-box problem that refers to the impossibility to analyze internal behaviour of complex networks in an efficient and meaningful way. The aim of this study is to develop a methodology that make it possible to extract finite-state automata (FSAs) descriptions of robot behaviours from the dynamics of automatically designed complex controller networks. These FSAs unlike complex networks from which they're extracted are both readable and editable thus making the resulting designs much more valuable.

Progetto e sviluppo di un banco prova per articolazioni protesiche attive ad un grado di libertà basato su programmable automation controller e motion capture

L'elaborato descrive il lavoro svolto in cinque mesi presso il Centro Protesi INAIL di Budrio (BO), che ha portato allo sviluppo di un banco prova per testare articolazioni elettromeccaniche. I dispositivi target, in particolare, sono stati due gomiti mioelettrici: il primo di produzione interna INAIL e il secondo prodotto da Selex ES in collaborazione con il Centro Protesi stesso. Per il controllo del movimento e l'acquisizione dei segnali elettrici si è scelto il PAC CompactRIO (National Instruments), mentre per le acquisizioni cinematiche di angolo e velocità angolare si è sfruttata la stereofotogrammetria.

Ottimizzazione di un'unita di controllo per protesi mioelettrica di arto superiore e confronto prestazionale tramite programmable automation controller e motion capture

Con il passare degli anni le tecnologie nel campo delle protesi mioelettriche di arto superiore stanno compiendo sempre più passi in avanti. In questo elaborato di tesi si darà un iniziale introduzione sulla protesica di arto superiore cercando di coprire tutte le possibili tipologie di protesi, prestando particolare attenzione agli arti artificiali mioelettrici. Gli scopi di questo studio sono in prima analisi una miglioria dell'unità di controllo di una protesi comandata da segnali elettromiografici di superficie, tramite l'utilizzo del nuovo IDE della Microchip (MPLAB X). In seconda analisi, invece, si attuerà un confronto prestazionale a livello di consumo in corrente di un prototipo di protesi mioelettrica nata dalla sinergia tra l'azienda "Selex ES" e il "Centro Protesi INAIL di Vigorso di Budrio". Per questo studio ci si è serviti di stereofotogrammetrica per la determinazione delle grandezze meccaniche, mentre tramite un sistema PAC si è riusciti ad ottenere specifiche grandezze elettriche. Lo studio ha portato, a livello di Firmware, l'inserimento del giusto comando di attuazione di un servofreno comandato in corrente e l'introduzione di una particolare modalità a basso consumo che consente un risparmio energetico di circa il 60% rispetto alla vecchia modalità. Discorso diverso per i risultati del confronto prestazionale che non ha portato ai risultati sperati in fase di progetto.

Rdnet network - protocollo di comunicazione tra controller e pc tramite cavo lan

Questo documento presenta la relazione di una tesi in azienda svolta presso la ditta RCF spa a Reggio Emilia. La tesi consiste nell’apportare migliorie ad un software preesistente, che opera nel campo di dispositivi audio di diverse tipologie (es casse e mixer), i quali normalmente vengono utilizzati nel sistema d’impianto audio in un concerto. In particolare la nuova funzionalità sviluppata consiste nell’implementazione del protocollo di comunicazione tra controllore e PC mediante l’utilizzo di una connessione Ethernet.

A QoS Controller Framework Compliant with the ETSI Network Function Virtualization Specification

The 5th generation of mobile networking introduces the concept of “Network slicing”, the network will be “sliced” horizontally, each slice will be compliant with different requirements in terms of network parameters such as bandwidth, latency. This technology is built on logical instead of physical resources, relies on virtual network as main concept to retrieve a logical resource. The Network Function Virtualisation provides the concept of logical resources for a virtual network function, enabling the concept virtual network; it relies on the Software Defined Networking as main technology to realize the virtual network as resource, it also define the concept of virtual network infrastructure with all components needed to enable the network slicing requirements. SDN itself uses cloud computing technology to realize the virtual network infrastructure, NFV uses also the virtual computing resources to enable the deployment of virtual network function instead of having custom hardware and software for each network function. The key of network slicing is the differentiation of slice in terms of Quality of Services parameters, which relies on the possibility to enable QoS management in cloud computing environment. The QoS in cloud computing denotes level of performances, reliability and availability offered. QoS is fundamental for cloud users, who expect providers to deliver the advertised quality characteristics, and for cloud providers, who need to find the right tradeoff between QoS levels that has possible to offer and operational costs. While QoS properties has received constant attention before the advent of cloud computing, performance heterogeneity and resource isolation mechanisms of cloud platforms have significantly complicated QoS analysis and deploying, prediction, and assurance. This is prompting several researchers to investigate automated QoS management methods that can leverage the high programmability of hardware and software resources in the cloud.

Realizzazione di un controller su piattaforma Android per la movimentazione di manipolatori industriali

Nell'ottica di trovare modalità sempre più intuitive per movimentare manipolatori industriali l’obiettivo della tesi è quello di realizzare una mobile app su piattaforma Android in grado appunto di movimentare un generico manipolatore industriale. L'applicazione sviluppata fornisce all'utente un’interfaccia semplice e intuitiva che permette, dopo un’opportuna configurazione iniziale, di controllare il moto di un manipolatore industriale attraverso l’uso del touch screen e degli elementi grafici dell’interfaccia. Oltre a istruire un manipolatore l’applicazione offre anche delle funzionalità per il salvataggio e la gestione di determinate configurazioni che il manipolatore può assumere nello spazio. Il grande vantaggio dell’applicazione è quello di fornire un’interfaccia universale per la movimentazione di qualsiasi manipolatore. Si può affermare quindi che essa fornisce un livello di astrazione superiore. In questo progetto di tesi è stato effettuato il testing dell'applicazione sviluppata sia con il manipolatore industriale Comau Smart Six, robot antropomorfo a 6 gradi di libertà, sia con un manipolatore simulato in Unity 3D. Sono stati raccolti dei dati, in particolare dei grafici, che mettono in relazione i comandi impartiti al manipolatore e i dati ricevuti da questo, in modo da ricavarne dei parametri che misurano l'efficienza e la correttezza dell'applicazione.