Measurement of tt ̄production cross section at 13 TeV in the fully-hadronic channel with CMS

Lo scopo di questa tesi è la misura di sezione d’urto di produzione di coppie top-antitop nel canale adronico. Per la misura sono stati utilizzati i dati raccolti dall’esperimento CMS in collisioni protone-protone ad LHC, con un’energia nel centro di massa pari a 13 TeV. Il campione di dati utilizzato corrisponde ad una luminosità integrata di 2.474 f b^ −1 . L’analisi dati inizia selezionando gli eventi che soddisfano determinate condizioni (e.g. trigger, tagli cinematici, sei o più jet, almeno 2 jet provenienti dall’adronizzazione di due quark bottom) con lo scopo di incrementare la purezza del segnale scartando il più possibile gli eventi di fondo. A seguire, viene ricostruita la massa del quark top usando un fit cinematico. Sulle distribuzioni di tale massa si basa la stima degli eventi di fondo e di segnale. Infine, attraverso un fit di verosimiglianza, si ottiene il valore della sezione d’urto: σ t t ̄ = 893 ± 57 (stat) ± 104 (syst) pb. Questo risultato è in buon accordo con il valore teorico di 832 pb e con altre misure di CMS effettuate in canali differenti.

Measurement of the Z and W production cross section in pp collisions at LHC using a bayesian approach

L’obiettivo di tutto il mio lavoro è stato quello di misurare le sezioni d’urto di produzione dei bosoni deboli W ± e Z nei loro decadimenti leptonici (e, μ) coi dati raccolti dal rivelatore ATLAS a LHC con un’energia del centro di massa di √s = 13 TeV relativi all’estate 2015. Gli eventi selezionati sono gli stessi di quelli del recente articolo della Collaborazione ATLAS sullo stesso argomento, in modo anche da poter operare un confronto tra i risultati ottenuti. Confronto peraltro necessario, poichè i risultati sono stati ottenuti con due metodologie differenti: tradizionale (classica) per l’articolo, bayesiana in questa tesi. L’approccio bayesiano permette di combinare i vari canali e di trattare gli effetti sistematici in modo del tutto naturale. I risultati ottenuti sono in ottimo accordo con le predizioni dello Standard Model e con quelli pubblicati da ATLAS.

Measurement of ttbar production differential cross section at \sqrt{s}=8 TeV at ATLAS

Top quark studies play an important role in the physics program of the Large Hadron Collider (LHC). The energy and luminosity reached allow the acquisition of a large amount of data especially in kinematic regions never studied before. In this thesis is presented the measurement of the ttbar production differential cross section on data collected by ATLAS in 2012 in proton proton collisions at \sqrt{s} = 8 TeV, corresponding to an integrated luminosity of 20.3 fb^{−1}. The measurement is performed for ttbar events in the semileptonic channel where the hadronically decaying top quark has a transverse momentum above 300 GeV. The hadronic top quark decay is reconstructed as a single large radius jet and identified using jet substructure properties. The final differential cross section result has been compared with several theoretical distributions obtaining a discrepancy of about the 25% between data and predictions, depending on the MC generator. Furthermore the kinematic distributions of the ttbar production process are very sensitive to the choice of the parton distribution function (PDF) set used in the simulations and could provide constraints on gluons PDF. In particular in this thesis is performed a systematic study on the PDF of the protons, varying several PDF sets and checking which one better describes the experimental distributions. The boosted techniques applied in this measurement will be fundamental in the next data taking at \sqrt{s}=13 TeV when will be produced a large amount of heavy particles with high momentum.

Luminosity determination for the measurement of the proton-proton total cross section at 8 TeV in the Atlas experiment

La sezione d’urto totale adronica gioca un ruolo fondamentale nel programma di fisica di LHC. Un calcolo di questo parametro, fondamentale nell’ambito della teoria delle interazioni forti, non é possibile a causa dell’inapplicabilità dell’approccio perturbativo. Nonostante ciò, la sezione d’urto può essere stimata, o quanto meno le può essere dato un limite, grazie ad un certo numero di relazioni, come ad esempio il Teorema Ottico. In questo contesto, il detector ALFA (An Absolute Luminosity For ATLAS) sfrutta il Teorema Ottico per determinare la sezione d’urto totale misurando il rate di eventi elastici nella direzione forward. Un tale approccio richiede un metodo accurato di misura della luminosità in condizioni sperimentali difficoltose, caratterizzate da valori di luminosità istantanea inferiore fino a 7 ordini di grandezza rispetto alle normali condizioni di LHC. Lo scopo di questa tesi è la determinazione della luminosità integrata di due run ad alto β*, utilizzando diversi algoritmi di tipo Event-Counting dei detector BCM e LUCID. Particolare attenzione è stata riservata alla sottrazione del fondo e allo studio delle in- certezze sistematiche. I valori di luminosità integrata ottenuti sono L = 498.55 ± 0.31 (stat) ± 16.23 (sys) μb^(-1) and L = 21.93 ± 0.07 (stat) ± 0.79 (sys) μb^(-1), rispettivamente per i due run. Tali saranno forniti alla comunità di fisica che si occupa della misura delle sezioni d’urto protone-protone, elastica e totale. Nel Run II di LHC, la sezione d’urto totale protone-protone sarà stimata con un’energia nel centro di massa di 13 TeV per capire meglio la sua dipendenza dall’energia in un simile regime. Gli strumenti utilizzati e l’esperienza acquisita in questa tesi saranno fondamentali per questo scopo.

Measurement of the inclusive and differential t/t cross sections at 13 TeV in the all-jets boosted regime with CMS

The t/t production cross section is measured with the CMS detector in the all-jets channel in $pp$ collisions at the centre-of-mass energy of 13 TeV. The analysis is based on the study of t/t events in the boosted topology, namely events in which decay products of the quark top have a high Lorentz boost and are thus reconstructed in the detector as a single, wide jet. The data sample used in this analysis corresponds to an integrated luminosity of 2.53 fb-1. The inclusive cross section is found to be sigma(t/t) = 727 +- 46 (stat.) +115-112 (sys.) +- 20~(lumi.) pb, a value which is consistent with the theoretical predictions. The differential, detector-level cross section is measured as a function of the transverse momentum of the leading jet and compared to the QCD theoretical predictions. Finally, the differential, parton-level cross section is reported, measured as a function of the transverse momentum of the leading parton, extrapolated to the full phase space and compared to the QCD predictions.

Search for time-integrated cp violation in $d^0 \rightarrow k^+k^-$ and $d^0 \rightarrow \pi^+\pi^-$ decays at lhcb.

The LHCb experiment at the LHC, by exploiting the high production cross section for $c\overline{c}$ quark pairs, offers the possibility to investigate $\mathcal{CP}$ violation in the charm sector with a very high precision.\\ In this thesis a measurement of time-integrated \(\mathcal{CP}\) violation using $D^0\rightarrow~K^+K^-$ and $D^0\rightarrow \pi^+\pi^-$ decays at LHCb is presented. The measured quantity is the difference ($\Delta$) of \(\mathcal{CP}\) asymmetry ($\mathcal{A}_{\mathcal{CP}}$) between the decay rates of $D^0$ and $\overline{D}^0$ mesons into $K^+K^–$ and $\pi^+\pi^-$ pairs.\\ The analysis is performed on 2011 data, collected at \(\sqrt{s}=7\) TeV and corresponding to an integrated luminosity of 1 fb\(^{-1}\), and 2012 data, collected at \(\sqrt{s}=8\) TeV and corresponding to an integrated luminosity of 2 fb\(^{-1}\).\\ A complete study of systematic uncertainties is beyond the aim of this thesis. However the most important systematic of the previous analysis has been studied. We find that this systematic uncertainty was due to a statistical fluctuation and then we demonstrate that it is no longer necessary to take into account.\\ By combining the 2011 and 2012 results, the final statistical precision is 0.08\%. When this analysis will be completed and published, this will be the most precise single measurement in the search for $\mathcal{CP}$ violation in the charm sector.

Multivariate analysis methods in the search for the Higgs boson produced in association with top pairs at the ATLAS experiment at LHC.

The Large Hadron Collider, located at the CERN laboratories in Geneva, is the largest particle accelerator in the world. One of the main research fields at LHC is the study of the Higgs boson, the latest particle discovered at the ATLAS and CMS experiments. Due to the small production cross section for the Higgs boson, only a substantial statistics can offer the chance to study this particle properties. In order to perform these searches it is desirable to avoid the contamination of the signal signature by the number and variety of the background processes produced in pp collisions at LHC. Much account assumes the study of multivariate methods which, compared to the standard cut-based analysis, can enhance the signal selection of a Higgs boson produced in association with a top quark pair through a dileptonic final state (ttH channel). The statistics collected up to 2012 is not sufficient to supply a significant number of ttH events; however, the methods applied in this thesis will provide a powerful tool for the increasing statistics that will be collected during the next LHC data taking.

Study of a new method for high energy top tagging at the ATLAS experiment

Since its discovery, top quark has represented one of the most investigated field in particle physics. The aim of this thesis is the reconstruction of hadronic top with high transverse momentum (boosted) with the Template Overlap Method (TOM). Because of the high energy, the decay products of boosted tops are partially or totally overlapped and thus they are contained in a single large radius jet (fat-jet). TOM compares the internal energy distributions of the candidate fat-jet to a sample of tops obtained by a MC simulation (template). The algorithm is based on the definition of an overlap function, which quantifies the level of agreement between the fat-jet and the template, allowing an efficient discrimination of signal from the background contributions. A working point has been decided in order to obtain a signal efficiency close to 90% and a corresponding background rejection at 70%. TOM performances have been tested on MC samples in the muon channel and compared with the previous methods present in literature. All the methods will be merged in a multivariate analysis to give a global top tagging which will be included in ttbar production differential cross section performed on the data acquired in 2012 at sqrt(s)=8 TeV in high phase space region, where new physics processes could be possible. Due to its peculiarity to increase the pT, the Template Overlap Method will play a crucial role in the next data taking at sqrt(s)=13 TeV, where the almost totality of the tops will be produced at high energy, making the standard reconstruction methods inefficient.