Modelling and Verification of a Correction Factor to Evaluate the Efficiency of Solar Thermal Collectors with the Rapid Test Method

A new method for the evaluation of the efficiency of parabolic trough collectors, called Rapid Test Method, is investigated at the Solar Institut Jülich. The basic concept is to carry out measurements under stagnation conditions. This allows a fast and inexpensive process due to the fact that no working fluid is required. With this approach, the temperature reached by the inner wall of the receiver is assumed to be the stagnation temperature and hence the average temperature inside the collector. This leads to a systematic error which can be rectified through the introduction of a correction factor. A model of the collector is simulated with COMSOL Multipyisics to study the size of the correction factor depending on collector geometry and working conditions. The resulting values are compared with experimental data obtained at a test rig at the Solar Institut Jülich. These results do not match with the simulated ones. Consequentially, it was not pos-sible to verify the model. The reliability of both the model with COMSOL Multiphysics and of the measurements are analysed. The influence of the correction factor on the rapid test method is also studied, as well as the possibility of neglecting it by measuring the receiver’s inner wall temperature where it receives the least amount of solar rays. The last two chapters analyse the specific heat capacity as a function of pressure and tem-perature and present some considerations about the uncertainties on the efficiency curve obtained with the Rapid Test Method.

Comparison of different solutions for the hybridization of a motorcycle engine for Formula Student applications and evaluation of the effectiveness on the simulated lap time

Following the latest environmental concerns, the importance of minimising the detrimental effect of emissions of terrestrial vehicles has become a major goal for the whole automotive field. The key to achieve an emission-free long term future is the electrification of vehicle fleets; this huge step cannot be taken without intermediate technologies. In this context, hybrid vehicles are fundamental to reach this goal. Specifically, mild hybrid vehicles represent a trade-off between cost and emissions that could act now as a bridge towards electrification. Like the industry, also student engineering competitions are likely to take the same route: Combustion vehicles may well turn into hybrid vehicles. For this reason, a preliminary design overview is necessary to pinpoint the key performance indicators for the prototypes of the future.