A study on set variable representations in constraint programming

Il lavoro presentato in questa tesi si colloca nel contesto della programmazione con vincoli, un paradigma per modellare e risolvere problemi di ricerca combinatoria che richiedono di trovare soluzioni in presenza di vincoli. Una vasta parte di questi problemi trova naturale formulazione attraverso il linguaggio delle variabili insiemistiche. Dal momento che il dominio di tali variabili può essere esponenziale nel numero di elementi, una rappresentazione esplicita è spesso non praticabile. Recenti studi si sono quindi focalizzati nel trovare modi efficienti per rappresentare tali variabili. Pertanto si è soliti rappresentare questi domini mediante l'uso di approssimazioni definite tramite intervalli (d'ora in poi rappresentazioni), specificati da un limite inferiore e un limite superiore secondo un'appropriata relazione d'ordine. La recente evoluzione della ricerca sulla programmazione con vincoli sugli insiemi ha chiaramente indicato che la combinazione di diverse rappresentazioni permette di raggiungere prestazioni di ordini di grandezza superiori rispetto alle tradizionali tecniche di codifica. Numerose proposte sono state fatte volgendosi in questa direzione. Questi lavori si differenziano su come è mantenuta la coerenza tra le diverse rappresentazioni e su come i vincoli vengono propagati al fine di ridurre lo spazio di ricerca. Sfortunatamente non esiste alcun strumento formale per paragonare queste combinazioni. Il principale obiettivo di questo lavoro è quello di fornire tale strumento, nel quale definiamo precisamente la nozione di combinazione di rappresentazioni facendo emergere gli aspetti comuni che hanno caratterizzato i lavori precedenti. In particolare identifichiamo due tipi possibili di combinazioni, una forte ed una debole, definendo le nozioni di coerenza agli estremi sui vincoli e sincronizzazione tra rappresentazioni. Il nostro studio propone alcune interessanti intuizioni sulle combinazioni esistenti, evidenziandone i limiti e svelando alcune sorprese. Inoltre forniamo un'analisi di complessità della sincronizzazione tra minlex, una rappresentazione in grado di propagare in maniera ottimale vincoli lessicografici, e le principali rappresentazioni esistenti.

A multi-objective genetic algorithm optimisation using variable speed pumps in water distribution systems

Due to its practical importance and inherent complexity, the optimisation of distribution networks for supplying drinking water has been the subject of extensive study for the past 30 years. The optimization is governed by sizing the pipes in the water distribution network (WDN) and / or optimises specific parts of the network such as pumps, tanks etc. or try to analyse and optimise the reliability of a WDN. In this thesis, the author has analysed two different WDNs (Anytown City and Cabrera city networks), trying to solve and optimise a multi-objective optimisation problem (MOOP). The main two objectives in both cases were the minimisation of Energy Cost (€) or Energy consumption (kWh), along with the total Number of pump switches (TNps) during a day. For this purpose, a decision support system generator for Multi-objective optimisation used. Its name is GANetXL and has been developed by the Center of Water System in the University of Exeter. GANetXL, works by calling the EPANET hydraulic solver, each time a hydraulic analysis has been fulfilled. The main algorithm used, was a second-generation algorithm for multi-objective optimisation called NSGA_II that gave us the Pareto fronts of each configuration. The first experiment that has been carried out was the network of Anytown city. It is a big network with a pump station of four fixed speed parallel pumps that are boosting the water dynamics. The main intervention was to change these pumps to new Variable speed driven pumps (VSDPs), by installing inverters capable to diverse their velocity during the day. Hence, it’s been achieved great Energy and cost savings along with minimisation in the number of pump switches. The results of the research are thoroughly illustrated in chapter 7, with comments and a variety of graphs and different configurations. The second experiment was about the network of Cabrera city. The smaller WDN had a unique FS pump in the system. The problem was the same as far as the optimisation process was concerned, thus, the minimisation of the energy consumption and in parallel the minimisation of TNps. The same optimisation tool has been used (GANetXL).The main scope was to carry out several and different experiments regarding a vast variety of configurations, using different pump (but this time keeping the FS mode), different tank levels, different pipe diameters and different emitters coefficient. All these different modes came up with a large number of results that were compared in the chapter 8. Concluding, it should be said that the optimisation of WDNs is a very interested field that has a vast space of options to deal with. This includes a large number of algorithms to choose from, different techniques and configurations to be made and different support system generators. The researcher has to be ready to “roam” between these choices, till a satisfactory result will convince him/her that has reached a good optimisation point.

Feedback linearization of antagonistically actuated variable stiffness joints with twisted string actuators

The work of this thesis is on the implementation of a variable stiffness joint antagonistically actuated by a couple of twisted-string actuator (TSA). This type of joint is possible to be applied in the field of robotics, like UB Hand IV (the anthropomorphic robotic hand developed by University of Bologna). The purposes of the activities are to build the joint dynamic model and simultaneously control the position and stiffness. Three different control approaches (Feedback linearization, PID, PID+Feedforward) are proposed and validated in simulation. To improve the properties of joint stiffness, a joint with elastic element is taken into account and discussed. To the end, the experimental setup that has been developed for the experimental validation of the proposed control approaches.

Supergeometry: a categorical point of view

In questa tesi viene studiato l'approccio funtoriale alla supergeometria. In particolare si usano le topologie di Grothendieck per studiare il concetto di rappresentabilità in questo contesto, in analogia a quanto fatto in geometria algebrica classica. Vengono poi introdotti i funtori di Weil-Berezin e lo Schwarz embedding, motivando i legami tra questi concetti e la rappresentabilità nel caso classico.