The use of Ground Penetrating Radar and alternative geophysical techniques for assessing embankments and dykes safety

The research is part of a survey for the detection of the hydraulic and geotechnical conditions of river embankments funded by the Reno River Basin Regional Technical Service of the Region Emilia-Romagna. The hydraulic safety of the Reno River, one of the main rivers in North-Eastern Italy, is indeed of primary importance to the Emilia-Romagna regional administration. The large longitudinal extent of the banks (several hundreds of kilometres) has placed great interest in non-destructive geophysical methods, which, compared to other methods such as drilling, allow for the faster and often less expensive acquisition of high-resolution data. The present work aims to experience the Ground Penetrating Radar (GPR) for the detection of local non-homogeneities (mainly stratigraphic contacts, cavities and conduits) inside the Reno River and its tributaries embankments, taking into account supplementary data collected with traditional destructive tests (boreholes, cone penetration tests etc.). A comparison with non-destructive methodologies likewise electric resistivity tomography (ERT), Multi-channels Analysis of Surface Waves (MASW), FDEM induction, was also carried out in order to verify the usability of GPR and to provide integration of various geophysical methods in the process of regular maintenance and check of the embankments condition. The first part of this thesis is dedicated to the explanation of the state of art concerning the geographic, geomorphologic and geotechnical characteristics of Reno River and its tributaries embankments, as well as the description of some geophysical applications provided on embankments belonging to European and North-American Rivers, which were used as bibliographic basis for this thesis realisation. The second part is an overview of the geophysical methods that were employed for this research, (with a particular attention to the GPR), reporting also their theoretical basis and a deepening of some techniques of the geophysical data analysis and representation, when applied to river embankments. The successive chapters, following the main scope of this research that is to highlight advantages and drawbacks in the use of Ground Penetrating Radar applied to Reno River and its tributaries embankments, show the results obtained analyzing different cases that could yield the formation of weakness zones, which successively lead to the embankment failure. As advantages, a considerable velocity of acquisition and a spatial resolution of the obtained data, incomparable with respect to other methodologies, were recorded. With regard to the drawbacks, some factors, related to the attenuation losses of wave propagation, due to different content in clay, silt, and sand, as well as surface effects have significantly limited the correlation between GPR profiles and geotechnical information and therefore compromised the embankment safety assessment. Recapitulating, the Ground Penetrating Radar could represent a suitable tool for checking up river dike conditions, but its use has significantly limited by geometric and geotechnical characteristics of the Reno River and its tributaries levees. As a matter of facts, only the shallower part of the embankment was investigate, achieving also information just related to changes in electrical properties, without any numerical measurement. Furthermore, GPR application is ineffective for a preliminary assessment of embankment safety conditions, while for detailed campaigns at shallow depth, which aims to achieve immediate results with optimal precision, its usage is totally recommended. The cases where multidisciplinary approach was tested, reveal an optimal interconnection of the various geophysical methodologies employed, producing qualitative results concerning the preliminary phase (FDEM), assuring quantitative and high confidential description of the subsoil (ERT) and finally, providing fast and highly detailed analysis (GPR). Trying to furnish some recommendations for future researches, the simultaneous exploitation of many geophysical devices to assess safety conditions of river embankments is absolutely suggested, especially to face reliable flood event, when the entire extension of the embankments themselves must be investigated.

Multiscale fabrication of functional materials for life sciences

Regenerative medicine claims for a better understanding of the cause-effect relation between cell behaviour and environment signals. The latter encompasses topographical, chemical and mechanical stimuli, electromagnetic fields, gradients of chemo-attractants and haptotaxis. In this perspective, a spatial control of the structures composing the environment is required. In this thesis I describe a novel approach for the multiscale patterning of biocompatible functional materials in order to provide systems able to accurately control cell adhesion and proliferation. The behaviour of different neural cell lines in response to several stimuli, specifically chemical, topographical and electrical gradients is presented. For each of the three kind of signals, I chose properly tailored materials and fabrication and characterization techniques. After a brief introduction on the state of art of nanotechnology, nanofabrication techniques and regenerative medicine in Chapter 1 and a detailed description of the main fabrication and characterization techniques employed in this work in Chapter 2, in Chapter 3 an easy route to obtain accurate control over cell proliferation close to 100% is described (chemical control). In Chapter 4 (topographical control) it is shown how the multiscale patterning of a well-established biocompatible material as titanium dioxide provides a versatile and robust method to study the effect of local topography on cell adhesion and growth. The third signal, viz. electric field, is investigated in Chapter 5 (electrical control), where the very early stages of neural cell adhesion are studied in the presence of modest steady electric fields. In Chapter 6 (appendix) a new patterning technique, called Lithographically Controlled Etching (LCE), is proposed. It is shown how LCE can provide at the same time the micro/nanostructuring and functionalization of a surface with nanosized objects, thus being suitable for applications both in regenerative medicine in biosensing.

Automated Analysis Methods for the Assessment of Bicycle Infrastructure and Demand

A first phase of the research activity has been related to the study of the state of art of the infrastructures for cycling, bicycle use and methods for evaluation. In this part, the candidate has studied the "bicycle system" in countries with high bicycle use and in particular in the Netherlands. Has been carried out an evaluation of the questionnaires of the survey conducted within the European project BICY on mobility in general in 13 cities of the participating countries. The questionnaire was designed, tested and implemented, and was later validated by a test in Bologna. The results were corrected with information on demographic situation and compared with official data. The cycling infrastructure analysis was conducted on the basis of information from the OpenStreetMap database. The activity consisted in programming algorithms in Python that allow to extract data from the database infrastructure for a region, to sort and filter cycling infrastructure calculating some attributes, such as the length of the arcs paths. The results obtained were compared with official data where available. The structure of the thesis is as follows: 1. Introduction: description of the state of cycling in several advanced countries, description of methods of analysis and their importance to implement appropriate policies for cycling. Supply and demand of bicycle infrastructures. 2. Survey on mobility: it gives details of the investigation developed and the method of evaluation. The results obtained are presented and compared with official data. 3. Analysis cycling infrastructure based on information from the database of OpenStreetMap: describes the methods and algorithms developed during the PhD. The results obtained by the algorithms are compared with official data. 4. Discussion: The above results are discussed and compared. In particular the cycle demand is compared with the length of cycle networks within a city. 5. Conclusions

Nano-fabrication of complex functional structures using non- conventional lithography

In Chapter 1 I will present a brief introduction on the state of art of nanotechnologies, nanofabrication techniques and unconventional lithography as a technique to fabricate the novel electronic device as resistive switch so-called memristor is shown. In Chapter 2 a detailed description of the main fabrication and characterization techniques employed in this work is reported. Chapter 3 parallel local oxidation lithography (pLOx) describes as a main technique to obtain accurate patterning process. All the effective parameters has been studied and the optimized condition observed to highly reproducible with excellent patterned nanostructures. The effect of negative bias, calls local reduction (LR) studied. Moreover, the use of AC bias shows faster patterning process respect to DC bias. In Chapter 4 (metal/ e-SiO2/ Si nanojunction) it is shown how the electrochemical oxide nanostructures by using pLOx can be used in the fabrication of novel devices call memristor. We demonstrate a new concept, based on conventional materials, where the lifetime problem is resolved by introducing a “regeneration” step, which restores the nano-memristor to its pristine condition by applying an appropriate voltage cycle. In Chapter 5 (Graphene/ e-SiO2/ Si), Graphene as a building block material is used as an electrode to selectively oxidize the silicon substrate by pLOx set up for the fabrication of novel resistive switch device. In Chapter 6 (surface architecture) I will show another application of pLOx in biotechnology is shown. So the surface functionalization combine with nano-patterning by pLOx used to design a new surface to accurately bind biomolecules with the possibility of studying those properties and more application in nano-bio device fabrication. So, in order to obtain biochips, electronic and optical/photonics devices Nano patterning of DNA used as scaffolds to fabricate small functional nano-components.

Salomé et Jean Baptiste. Réinvestissements symboliques et récritures d'un mythe dans la littérature et dans l'art (1870-1914)

La publication de nombreuses œuvres, à la fois littéraires et picturales, entre 1870 et 1914, inspirées par l’épisode biblique du meurtre de Jean Baptiste par Salomé, s’inscrit dans une crise qui touche à cette époque, en Europe, aussi bien le sujet que la notion de représentation. Le mythe de Salomé permet de poursuivre une réflexion de nature littéraire, historique et esthétique concernant le processus d’autonomisation de l’art. À partir des sources bibliques et antiques, dans lesquelles Salomé et Jean Baptiste incarnent respectivement le monde païen en conflit avec le monde chrétien, ces deux personnages font graduellement leur entrée dans l’univers de la fiction. Ils sont au cœur de la transition d’une lecture transcendante — reliée particulièrement à la tradition catholique — de l’épisode tragique qui les unit, à une lecture immanente qui en fait deux instances purement esthétiques. La danseuse et le dernier des prophètes émergent dans la littérature et dans l’art occidentaux comme deux pôles symboliques, liés l’un à l’autre par différents types de relation, susceptibles d’être librement réinvestis par de nouvelles significations et à l’écart des conventions. Si, dans la première partie du XIXe siècle, Salomé et Jean Baptiste sont encore liés à leur sens orthodoxe, au tournant du siècle ils finissent par s’autonomiser de l’Écriture et donnent lieu à de multiples récritures et à des adaptations inattendues. Celles-ci ressortissent alors moins du blasphème à proprement parler que d’un témoignage emblématique d’une transformation du rapport que l’artiste entretient avec son œuvre. Celui-ci, en s’identifiant avec le prophète décollé, se mesure à l’œuvre d’art, qui est incarnée par Salomé. La relation entre Salomé et Jean Baptiste, dans ces diverses représentations, exprime et reflète le moment où art et littérature se reconnaissent comme fictions.

La sociologia relazionale di Georg Simmel. La relazione come forma sociale vitale

La tesi di dottorato ha come oggetto il pensiero sociologico di Georg Simmel con particolare riferimento alla sua interpretazione nei diversi indirizzi di ricerca della sociologia relazionale contemporanea. In particolare, si propone una rilettura del contributo simmeliano alla luce del paradigma relazionale della sociologia di Pierpaolo Donati. Il lavoro di ricerca è stato condotto secondo una rigorosa ricognizione testuale dell’opus simmeliano e della bibliografia critica internazionale sull'argomento in oggetto. A partire dalla nozione di relazione sociale, si dipana l’analisi della proposta sociologica simmeliana: il termine tedesco Wechselwirkung (azione reciproca) racchiude la complessa semantica con cui assume senso l’intera teoria sociologica simmeliana. Simmel è il primo "sociologo relazionale", come sostenuto da Donati, e in questa ricerca si cerca di mostrare le evidenze della validità di tale asserzione. Nella formulazione simmeliana si trovano importanti indizi teorici che permettono di rielaborare la relazione nei termini di una “forma sociale vitale”. Questo significa che la relazione sociale trova la sua ragion d’essere in quanto fenomeno umano che si determina a partire dalle nozioni di “spirito” (Geist) e “vita”(Leben). Nel primo capitolo si chiarisce la natura di questa relazione sociale in rapporto alle varie proposte sociologiche relazionali in campo internazionale. Nel secondo capitolo si analizza in maniera critica la (ri)formulazione simmeliana della relazione come scambio (nella forma simbolica del denaro) e le interpretazioni relazionali che si sono succedute a partire da questo cambio di rotta. Nel terzo capitolo vengono passate in rassegna le principali figure relazionali (la vita della metropoli, la moda, il conflitto, il povero, lo straniero) con le quali si confronta il sociologo berlinese. Nel quarto capitolo si propone di rileggere fenomeni sociali e culturali come forme relazionali in riferimento alla sfera dell’arte e della teologia (religione).

Cognitive Assessment and Rehabilitation of subjects with Traumatic Brain Injury

This thesis regards the study and the development of new cognitive assessment and rehabilitation techniques of subjects with traumatic brain injury (TBI). In particular, this thesis i) provides an overview about the state of art of this new assessment and rehabilitation technologies, ii) suggests new methods for the assessment and rehabilitation and iii) contributes to the explanation of the neurophysiological mechanism that is involved in a rehabilitation treatment. Some chapters provide useful information to contextualize TBI and its outcome; they describe the methods used for its assessment/rehabilitation. The other chapters illustrate a series of experimental studies conducted in healthy subjects and TBI patients that suggest new approaches to assessment and rehabilitation. The new proposed approaches have in common the use of electroencefalografy (EEG). EEG was used in all the experimental studies with a different purpose, such as diagnostic tool, signal to command a BCI-system, outcome measure to evaluate the effects of a treatment, etc. The main achieved results are about: i) the study and the development of a system for the communication with patients with disorders of consciousness. It was possible to identify a paradigm of reliable activation during two imagery task using EEG signal or EEG and NIRS signal; ii) the study of the effects of a neuromodulation technique (tDCS) on EEG pattern. This topic is of great importance and interest. The emerged founding showed that the tDCS can manipulate the cortical network activity and through the research of optimal stimulation parameters, it is possible move the working point of a neural network and bring it in a condition of maximum learning. In this way could be possible improved the performance of a BCI system or to improve the efficacy of a rehabilitation treatment, like neurofeedback.