An ontology-based approach to define and manage B2B interoperability

Electronic business surely represents the new development perspective for world-wide trade. Together with the idea of ebusiness, and the exigency to exchange business messages between trading partners, the concept of business-to-business (B2B) integration arouse. B2B integration is becoming necessary to allow partners to communicate and exchange business documents, like catalogues, purchase orders, reports and invoices, overcoming architectural, applicative, and semantic differences, according to the business processes implemented by each enterprise. Business relationships can be very heterogeneous, and consequently there are variousways to integrate enterprises with each other. Moreover nowadays not only large enterprises, but also the small- and medium- enterprises are moving towards ebusiness: more than two-thirds of Small and Medium Enterprises (SMEs) use the Internet as a business tool. One of the business areas which is actively facing the interoperability problem is that related with the supply chain management. In order to really allow the SMEs to improve their business and to fully exploit ICT technologies in their business transactions, there are three main players that must be considered and joined: the new emerging ICT technologies, the scenario and the requirements of the enterprises and the world of standards and standardisation bodies. This thesis presents the definition and the development of an interoperability framework (and the bounded standardisation intiatives) to provide the Textile/Clothing sectorwith a shared set of business documents and protocols for electronic transactions. Considering also some limitations, the thesis proposes a ontology-based approach to improve the functionalities of the developed framework and, exploiting the technologies of the semantic web, to improve the standardisation life-cycle, intended as the development, dissemination and adoption of B2B protocols for specific business domain. The use of ontologies allows the semantic modellisation of knowledge domains, upon which it is possible to develop a set of components for a better management of B2B protocols, and to ease their comprehension and adoption for the target users.

A skin surface characterization system based on capacitive image analysis

During the last few years, several methods have been proposed in order to study and to evaluate characteristic properties of the human skin by using non-invasive approaches. Mostly, these methods cover aspects related to either dermatology, to analyze skin physiology and to evaluate the effectiveness of medical treatments in skin diseases, or dermocosmetics and cosmetic science to evaluate, for example, the effectiveness of anti-aging treatments. To these purposes a routine approach must be followed. Although very accurate and high resolution measurements can be achieved by using conventional methods, such as optical or mechanical profilometry for example, their use is quite limited primarily to the high cost of the instrumentation required, which in turn is usually cumbersome, highlighting some of the limitations for a routine based analysis. This thesis aims to investigate the feasibility of a noninvasive skin characterization system based on the analysis of capacitive images of the skin surface. The system relies on a CMOS portable capacitive device which gives 50 micron/pixel resolution capacitance map of the skin micro-relief. In order to extract characteristic features of the skin topography, image analysis techniques, such as watershed segmentation and wavelet analysis, have been used to detect the main structures of interest: wrinkles and plateau of the typical micro-relief pattern. In order to validate the method, the features extracted from a dataset of skin capacitive images acquired during dermatological examinations of a healthy group of volunteers have been compared with the age of the subjects involved, showing good correlation with the skin ageing effect. Detailed analysis of the output of the capacitive sensor compared with optical profilometry of silicone replica of the same skin area has revealed potentiality and some limitations of this technology. Also, applications to follow-up studies, as needed to objectively evaluate the effectiveness of treatments in a routine manner, are discussed.

Profilo genomico e di espressione dell'Osteosarcoma. Identificazione dei geni con alto grado di correlazione tra numero di copie ed espressione

To identify the regions of recurrent copy number abnormality in osteosarcoma and their effect on gene expression, we performed an integrated genome-wide high-resolution array CGH (aCGH) and gene expression profiling analysis on 40 human OS tissues and 12 OS cell lines. This analysis identified several recurrent chromosome regions that contain genes that show a gene dosage effect on gene expression. A further search, performed on those genes that were over-expressed and localized in the frequently amplified chromosomal regions, greatly reduced the number of candidate genes while their characterization using gene ontology (GO) analysis suggests the importance of the deregulation of the G1-to-S phase in the development of the disease. We also identified frequent deletions on 3q in the vicinity of LSAMP and performed a fine mapping analysis of the breakpoints. We precisely mapped the breakpoints in several instances and demonstrated that the majority do not involve the LSAMP gene itself, and that they appear to form by a process of non-homologous end joining. In addition, aCGH analysis revealed frequent gains of IGF1R that were highly correlated with its protein level. Blockade of IGF1R in OS cell lines with high copy number gain led to growth inhibition suggesting that IGF1R may be a viable drug target in OS, particularly in patients with copy number driven overexpression of this receptor.

Definition, realization and evaluation of a software reference architecture for use in space applications

A recent initiative of the European Space Agency (ESA) aims at the definition and adoption of a software reference architecture for use in on-board software of future space missions. Our PhD project placed in the context of that effort. At the outset of our work we gathered all the industrial needs relevant to ESA and all the main European space stakeholders and we were able to consolidate a set of technical high-level requirements for the fulfillment of them. The conclusion we reached from that phase confirmed that the adoption of a software reference architecture was indeed the best solution for the fulfillment of the high-level requirements. The software reference architecture we set on building rests on four constituents: (i) a component model, to design the software as a composition of individually verifiable and reusable software units; (ii) a computational model, to ensure that the architectural description of the software is statically analyzable; (iii) a programming model, to ensure that the implementation of the design entities conforms with the semantics, the assumptions and the constraints of the computational model; (iv) a conforming execution platform, to actively preserve at run time the properties asserted by static analysis. The nature, feasibility and fitness of constituents (ii), (iii) and (iv), were already proved by the author in an international project that preceded the commencement of the PhD work. The core of the PhD project was therefore centered on the design and prototype implementation of constituent (i), a component model. Our proposed component model is centered on: (i) rigorous separation of concerns, achieved with the support for design views and by careful allocation of concerns to the dedicated software entities; (ii) the support for specification and model-based analysis of extra-functional properties; (iii) the inclusion space-specific concerns.

Modelli Gravitazionali per l'analisi del Commercio Internazionale

Il modello gravitazionale e' ormai diventato un "cavallo da battaglia" in economia internazionle ed e' comunemente utilizzato nella determinazione dei flussi commerciali. Recentemente, molti studi hanno mostrato l'importanza della dipendenza spaziale, che va' a considerare quegli effetti dovuti al cosiddetto "third country". Intervengono a questo scopo la modellistica e le tecniche di stima di Econometria Spaziale. Verra' fatto uso di tali tecniche allo scopo di stimare con un modello gravitazionale spaziale il commercio internazionale tra paesi dell'OCSE per un panel di 22 anni. L'obiettivo e' quindi duplice: da un lato, si andra' ad applicare le piu' moderne tecniche di Econometria Spaziale, in un campo in cui tali contributi scarseggiano. Dall'altro lato,verra' fornita una interpretazione del comportamento del commercio internazionale tra paesi dell'OCSE, approfondendo gli aspetti relativi all'effetto del"third country" e del fenomeno migratorio. Inoltre , viene proposta un'analisi che ha lo scopo di validare l'ipotesi di omissione della distanza dal modello gravitazione strutturale.

Valutazione del rilascio ionico in pazienti portatori di protesi di rivestimento d'anca BHR: confronto a lungo termine con artroplastica totale d'anca metallo-metallo

Lo scopo di questo studio è stato quello di determinare se a lungo termine le concentrazioni sieriche di ioni nei pazienti con protesi di rivestimento d’anca metallo-metallo (MOM-HR, metal-on-metal hip resurfacing) fossero differenti da quelle valutate nei pazienti con protesi totale d’anca metallo-metallo e testa del diametro di 28 mm (MOM-THA, metal-on-metal total hip arthroplasty); inoltre è stato valutato se le concentrazioni ioniche fossero al di sopra dei valori di riferimento e se fosse possibile stabilire l’esistenza di una relazione tra sesso e concentrazioni di ioni con riferimento al tipo di impianto. Il gruppo MOM-HR era costituito da 25 pazienti mentre il gruppo MOM-THA era di 16 pazienti. Per poter ricavare i valori di riferimento sono stati reclutati 48 donatori sani. La misurazione delle concentrazioni degli ioni cobalto (Co), cromo (Cr), nickel (Ni) e molibdeno (Mo) è stata effettuata utilizzando la spettrofotometria ad assorbimento atomico su fornace di grafite. A parte il Ni, le concentrazioni di ioni nei pazienti con MOM-HR erano più elevate rispetto ai controlli. Il rilascio di ioni Cr e Co nei pazienti con MOM-HR è risultato superiore rispetto ai soggetti con MOM-THA. Da un’analisi basata sul sesso, è emerso che nelle femmine con MOM-HR i livelli di ioni Cr e Co sono risultati significativamente aumentati rispetto alle femmine con MOM-THA. Indipendentemente dal tipo di impianto, gli accoppiamenti metallo-metallo (MOM) producono concentrazioni di ioni metallici significativamente più alte a follow-up a lungo termine rispetto a quelle osservate nei soggetti sani. Un fattore che deve essere attentamente considerato nella scelta dell’impianto, e in particolar modo nei soggetti giovani, è il cospicuo rilascio di ioni Cr e Co nella popolazione femminile con MOM-HR.

Genetic basis of variation for root traits and response to heat stress in durum wheat

Durum wheat is the second most important wheat species worldwide and the most important crop in several Mediterranean countries including Italy. Durum wheat is primarily grown under rainfed conditions where episodes of drought and heat stress are major factors limiting grain yield. The research presented in this thesis aimed at the identification of traits and genes that underlie root system architecture (RSA) and tolerance to heat stress in durum wheat, in order to eventually contribute to the genetic improvement of this species. In the first two experiments we aimed at the identification of QTLs for root trait architecture at the seedling level by studying a bi-parental population of 176 recombinant inbred lines (from the cross Meridiano x Claudio) and a collection of 183 durum elite accessions. Forty-eight novel QTLs for RSA traits were identified in each of the two experiments, by means of linkage- and association mapping-based QTL analysis, respectively. Important QTLs controlling the angle of root growth in the seedling were identified. In a third experiment, we investigated the phenotypic variation of root anatomical traits by means of microscope-based analysis of root cross sections in 10 elite durum cultivars. The results showed the presence of sizeable genetic variation in aerenchyma-related traits, prompting for additional studies aimed at mapping the QTLs governing such variation and to test the role of aerenchyma in the adaptive response to abiotic stresses. In the fourth experiment, an association mapping experiment for cell membrane stability at the seedling stage (as a proxy trait for heat tolerance) was carried out by means of association mapping. A total of 34 QTLs (including five major ones), were detected. Our study provides information on QTLs for root architecture and heat tolerance which could potentially be considered in durum wheat breeding programs.