Properties of gas and dark matter in X-ray galaxy clusters with Sunyaev Zel'dovich measurements

I have studied entropy profiles obtained in a sample of 24 X-ray objects at high redshift retrieved from the Chandra archive. I have discussed the scaling properties of the entropy S, the correlation between metallicity Z and S, the profiles of the temperature of the gas, Tgas, and performed a comparison between the dark matter 'temperature' and Tgas in order to constrain the non-gravitational processes which affect the thermal history of the gas. Furthermore I have studied the scaling relations between the X-ray quantities and Sunyaev Zel'dovich measurements. I have observed that X-ray laws are steeper than the relations predicted from the adiabatic model. These deviations from expectations based on self-similarity are usually interpreted in terms of feedback processes leading to non-gravitational gas heating, and suggesting a scenario in which the ICM at higher redshift has lower both X-ray luminosity and pressure in the central regions than the expectations from self-similar model. I have also investigated a Bayesian X-ray and Sunyaev Zel'dovich analysis, which allows to study the external regions of the clusters well beyond the volumes resolved with X-ray observations (1/3-1/2 of the virial radius), to measure the deprojected physical cluster properties, like temperature, density, entropy, gas mass and total mass up to the virial radius.

Diagnostic techniques for EHD and MHD interaction

The impact of plasma technologies is growing both in the academic and in the industrial fields. Nowadays, a great interest is focused in plasma applications in aeronautics and astronautics domains. Plasma actuators based on the Magneto-Hydro-Dynamic (MHD) and Electro- Hydro-Dynamic (EHD) interactions are potentially able to suitably modify the fluid-dynamics characteristics around a flying body without utilizing moving parts. This could lead to the control of an aircraft with negligible response time, more reliability and improvements of the performance. In order to study the aforementioned interactions, a series of experiments and a wide number of diagnostic techniques have been utilized. The EHD interaction, realized by means of a Dielectric Barrier Discharge (DBD) actuator, and its impact on the boundary layer have been evaluated by means of two different experiments. In the first one a three phase multi-electrode flat panel actuator is used. Different external flow velocities (from 1 to 20m/s) and different values of the supplied voltage and frequency have been considered. Moreover a change of the phase sequence has been done to verify the influence of the electric field existing between successive phases. Measurements of the induced speed had shown the effect of the supply voltage and the frequency, and the phase order in the momentum transfer phenomenon. Gains in velocity, inside the boundary layer, of about 5m/s have been obtained. Spectroscopic measurements allowed to determine the rotational and the vibrational temperature of the plasma which lie in the range of 320 ÷ 440°K and of 3000 ÷ 3900°K respectively. A deviation from thermodynamic equilibrium had been found. The second EHD experiment is realized on a single electrode pair DBD actuator driven by nano-pulses superimposed to a DC or an AC bias. This new supply system separates the plasma formation mechanism from the acceleration action on the fluid, leading to an higher degree of the control of the process. Both the voltage and the frequency of the nano-pulses and the amplitude and the waveform of the bias have been varied during the experiment. Plasma jets and vortex behavior had been observed by means of fast Schlieren imaging. This allowed a deeper understanding of the EHD interaction process. A velocity increase in the boundary layer of about 2m/s had been measured. Thrust measurements have been performed by means of a scales and compared with experimental data reported in the literature. For similar voltage amplitudes thrust larger than those of the literature, had been observed. Surface charge measurements led to realize a modified DBD actuator able to obtain similar performances when compared with that of other experiments. However in this case a DC bias replacing the AC bias had been used. MHD interaction experiments had been carried out in a hypersonic wind tunnel in argon with a flow of Mach 6. Before the MHD experiments a thermal, fluid-dynamic and plasma characterization of the hypersonic argon plasma flow have been done. The electron temperature and the electron number density had been determined by means of emission spectroscopy and microwave absorption measurements. A deviation from thermodynamic equilibrium had been observed. The electron number density showed to be frozen at the stagnation region condition in the expansion through the nozzle. MHD experiments have been performed using two axial symmetric test bodies. Similar magnetic configurations were used. Permanent magnets inserted into the test body allowed to generate inside the plasma azimuthal currents around the conical shape of the body. These Faraday currents are responsible of the MHD body force which acts against the flow. The MHD interaction process has been observed by means of fast imaging, pressure and electrical measurements. Images showed bright rings due to the Faraday currents heating and exciting the plasma particles. Pressure measurements showed increases of the pressure in the regions where the MHD interaction is large. The pressure is 10 to 15% larger than when the MHD interaction process is silent. Finally by means of electrostatic probes mounted flush on the test body lateral surface Hall fields of about 500V/m had been measured. These results have been used for the validation of a numerical MHD code.

Second law analysis and simulation techniques for the energy optimization of buildings

The research activity described in this thesis is focused mainly on the study of finite-element techniques applied to thermo-fluid dynamic problems of plant components and on the study of dynamic simulation techniques applied to integrated building design in order to enhance the energy performance of the building. The first part of this doctorate thesis is a broad dissertation on second law analysis of thermodynamic processes with the purpose of including the issue of the energy efficiency of buildings within a wider cultural context which is usually not considered by professionals in the energy sector. In particular, the first chapter includes, a rigorous scheme for the deduction of the expressions for molar exergy and molar flow exergy of pure chemical fuels. The study shows that molar exergy and molar flow exergy coincide when the temperature and pressure of the fuel are equal to those of the environment in which the combustion reaction takes place. A simple method to determine the Gibbs free energy for non-standard values of the temperature and pressure of the environment is then clarified. For hydrogen, carbon dioxide, and several hydrocarbons, the dependence of the molar exergy on the temperature and relative humidity of the environment is reported, together with an evaluation of molar exergy and molar flow exergy when the temperature and pressure of the fuel are different from those of the environment. As an application of second law analysis, a comparison of the thermodynamic efficiency of a condensing boiler and of a heat pump is also reported. The second chapter presents a study of borehole heat exchangers, that is, a polyethylene piping network buried in the soil which allows a ground-coupled heat pump to exchange heat with the ground. After a brief overview of low-enthalpy geothermal plants, an apparatus designed and assembled by the author to carry out thermal response tests is presented. Data obtained by means of in situ thermal response tests are reported and evaluated by means of a finite-element simulation method, implemented through the software package COMSOL Multyphysics. The simulation method allows the determination of the precise value of the effective thermal properties of the ground and of the grout, which are essential for the design of borehole heat exchangers. In addition to the study of a single plant component, namely the borehole heat exchanger, in the third chapter is presented a thorough process for the plant design of a zero carbon building complex. The plant is composed of: 1) a ground-coupled heat pump system for space heating and cooling, with electricity supplied by photovoltaic solar collectors; 2) air dehumidifiers; 3) thermal solar collectors to match 70% of domestic hot water energy use, and a wood pellet boiler for the remaining domestic hot water energy use and for exceptional winter peaks. This chapter includes the design methodology adopted: 1) dynamic simulation of the building complex with the software package TRNSYS for evaluating the energy requirements of the building complex; 2) ground-coupled heat pumps modelled by means of TRNSYS; and 3) evaluation of the total length of the borehole heat exchanger by an iterative method developed by the author. An economic feasibility and an exergy analysis of the proposed plant, compared with two other plants, are reported. The exergy analysis was performed by considering the embodied energy of the components of each plant and the exergy loss during the functioning of the plants.

Simulative Investigation on the Electronic, Vibrational and Optical Properties of the Ge2Sb2Te5 Chalcogenide

Chalcogenides are chemical compounds with at least one of the following three chemical elements: Sulfur (S), Selenium (Sn), and Tellurium (Te). As opposed to other materials, chalcogenide atomic arrangement can quickly and reversibly inter-change between crystalline, amorphous and liquid phases. Therefore they are also called phase change materials. As a results, chalcogenide thermal, optical, structural, electronic, electrical properties change pronouncedly and significantly with the phase they are in, leading to a host of different applications in different areas. The noticeable optical reflectivity difference between crystalline and amorphous phases has allowed optical storage devices to be made. Their very high thermal conductivity and heat fusion provided remarkable benefits in the frame of thermal energy storage for heating and cooling in residential and commercial buildings. The outstanding resistivity difference between crystalline and amorphous phases led to a significant improvement of solid state storage devices from the power consumption to the re-writability to say nothing of the shrinkability. This work focuses on a better understanding from a simulative stand point of the electronic, vibrational and optical properties for the crystalline phases (hexagonal and faced-centered cubic). The electronic properties are calculated implementing the density functional theory combined with pseudo-potentials, plane waves and the local density approximation. The phonon properties are computed using the density functional perturbation theory. The phonon dispersion and spectrum are calculated using the density functional perturbation theory. As it relates to the optical constants, the real part dielectric function is calculated through the Drude-Lorentz expression. The imaginary part results from the real part through the Kramers-Kronig transformation. The refractive index, the extinctive and absorption coefficients are analytically calculated from the dielectric function. The transmission and reflection coefficients are calculated using the Fresnel equations. All calculated optical constants compare well the experimental ones.

Mg for hydrogen storage: synthesis, nanostructure and thermodynamics properties

Nowadays alternative energies are an extremely important topic and the possibility of using hydrogen as an energy carrier must be explored. Many problems infer the technological application of this abundant and powerful resource, one of them the possibility of storage. In the framework of suitable materials for hydrogen storage, magnesium has been the center of this study because it is cheap and the amount of stored hydrogen that it achieves (7.6 wt%) is extremely appealing. Nanostructure helps to overcome the slow hydrogen diffusion and the functionalization of surfaces with transition metals or oxides favors the hydrogen molecule dissociation/recombination. The aim of this research is the investigation of the metal-hydride transformation in magnesium nanoparticles synthesized by inert-gas condensation, exploiting the fact that they are a simple model system. The so produced nanostructured powder has been analyzed in response to nanoparticles surface functionalization by transition metal clusters, specifically palladium, nickel and titanium, chosen on the basis of their completely different Mg-related phase diagrams. The role of the intermetallic phases formed upon heating and hydrogenation treatments will be presented to provide a comprehensive picture of hydrogen sorption in this class of nanostructured storage materials.

La caratterizzazione probabilistica del sottosuolo come strumento per l’ottimizzazione della progettazione integrata dei sistemi geotermici

L’utilizzo del reservoir geotermico superficiale a scopi termici / frigoriferi è una tecnica consolidata che permette di sfruttare, tramite appositi “geoscambiatori”, un’energia presente ovunque ed inesauribile, ad un ridotto prezzo in termini di emissioni climalteranti. Pertanto, il pieno sfruttamento di questa risorsa è in linea con gli obiettivi del Protocollo di Kyoto ed è descritto nella Direttiva Europea 2009/28/CE (Comunemente detta: Direttiva Rinnovabili). Considerato il notevole potenziale a fronte di costi sostenibili di installazione ed esercizio, la geotermia superficiale è stata sfruttata già dalla metà del ventesimo secolo in diversi contesti (geografici, geologici e climatici) e per diverse applicazioni (residenziali, commerciali, industriali, infrastrutturali). Ciononostante, solo a partire dagli anni 2000 la comunità scientifica e il mercato si sono realmente interessati ed affacciati all’argomento, a seguito di sopraggiunte condizioni economiche e tecniche. Una semplice ed immediata dimostrazione di ciò si ritrova nel fatto che al 2012 non esiste ancora un chiaro riferimento tecnico condiviso a livello internazionale, né per la progettazione, né per l’installazione, né per il testing delle diverse applicazioni della geotermia superficiale, questo a fronte di una moltitudine di articoli scientifici pubblicati, impianti realizzati ed associazioni di categoria coinvolte nel primo decennio del ventunesimo secolo. Il presente lavoro di ricerca si colloca all’interno di questo quadro. In particolare verranno mostrati i progressi della ricerca svolta all’interno del Dipartimento di Ingegneria Civile, Ambientale e dei Materiali nei settori della progettazione e del testing dei sistemi geotermici, nonché verranno descritte alcune tipologie di geoscambiatori innovative studiate, analizzate e testate nel periodo di ricerca.

Inserimento eterofamigliare supportato di adulti sofferenti di disturbi psichici: Valutazione degli esiti

L’Inserimento Eterofamigliare Supportato di Adulti (IESA) sofferenti di disturbi psichici consiste nell’accogliere persone in cura presso i servizi psichiatrici territoriali, nel proprio domicilio, integrandole nelle proprie relazioni famigliari. Obiettivo è migliorare la qualità di vita dell’utente e favorirne l’integrazione nella comunità. Obiettivo. Valutare gli esiti dello IESA, con un disegno di ricerca longitudinale, considerando: psicopatologia, benessere psicologico, funzionamento sociale e familiare. Metodologia. 40 soggetti: 20 pazienti e 20 ospitanti. La valutazione clinica è stata effettuata all’inizio della convivenza e al follow-up di 1, 3, 6 e 12 mesi. Strumenti utilizzati: BPRS, VGF, PWB, SQ, FAD. Analisi statistica: Modello Lineare Generale (GLM) con l’Analisi della Varianza per prove ripetute e calcolo dell’effect-size. Risultati. 15 pazienti maschi e 5 femmine, 17 italiani. 11 soddisfano i criteri diagnostici (DSM-IV-TR) per schizofrenia e disturbi psicotici, 5 per i disturbi dell’umore e 4 per i disturbi di personalità. Dopo l’inserimento 3 sono stati i ricoveri e 4 le visite psichiatriche urgenti. 8 pazienti modificano/diminuiscono la terapia e 3 la sospendono. Aumenta il benessere psicologico (PWB); diminuiscono i sintomi psicopatologici (BPRS ed SQ) e migliora il funzionamento globale (VFG). Il gruppo dei famigliari composto da 11 uomini e 9 donne, 19 di nazionalità italiana; con età media di 55 anni. 8 sono coniugati, 6 celibi/nubili, 4 divorziati e 2 vedovi. 9 hanno figli, 11 lavorano e 8 sono pensionati. Nei famigliari aumenta il benessere psicologico (PWB), migliora il funzionamento famigliare (FAD) e la valutazione del funzionamento globale (VGF) rimane costante nel tempo. Discussioni e conclusioni. Il progetto IESA sembra migliorare la psicopatologia, con una diminuzione dei comportamenti maladattativi e un aumento delle capacità relazionali dell’ospite favorendone l’integrazione. Inoltre, lo IESA sembra diminuire i costi della cronicità psichiatrica: diminuzione degli accessi al Pronto Soccorso, delle visite psichiatriche urgenti e delle giornate di ricovero.