Enabling Blocks for Integrated CMOS UWB Transceivers

The last decades have seen an unrivaled growth and diffusion of mobile telecommunications. Several standards have been developed to this purposes, from GSM mobile phone communications to WLAN IEEE 802.11, providing different services for the the transmission of signals ranging from voice to high data rate digital communications and Digital Video Broadcasting (DVB). In this wide research and market field, this thesis focuses on Ultra Wideband (UWB) communications, an emerging technology for providing very high data rate transmissions over very short distances. In particular the presented research deals with the circuit design of enabling blocks for MB-OFDM UWB CMOS single-chip transceivers, namely the frequency synthesizer and the transmission mixer and power amplifier. First we discuss three different models for the simulation of chargepump phase-locked loops, namely the continuous time s-domain and discrete time z-domain approximations and the exact semi-analytical time-domain model. The limitations of the two approximated models are analyzed in terms of error in the computed settling time as a function of loop parameters, deriving practical conditions under which the different models are reliable for fast settling PLLs up to fourth order. Besides, a phase noise analysis method based upon the time-domain model is introduced and compared to the results obtained by means of the s-domain model. We compare the three models over the simulation of a fast switching PLL to be integrated in a frequency synthesizer for WiMedia MB-OFDM UWB systems. In the second part, the theoretical analysis is applied to the design of a 60mW 3.4 to 9.2GHz 12 Bands frequency synthesizer for MB-OFDM UWB based on two wide-band PLLs. The design is presented and discussed up to layout level. A test chip has been implemented in TSMC CMOS 90nm technology, measured data is provided. The functionality of the circuit is proved and specifications are met with state-of-the-art area occupation and power consumption. The last part of the thesis deals with the design of a transmission mixer and a power amplifier for MB-OFDM UWB band group 1. The design has been carried on up to layout level in ST Microlectronics 65nm CMOS technology. Main characteristics of the systems are the wideband behavior (1.6 GHz of bandwidth) and the constant behavior over process parameters, temperature and supply voltage thanks to the design of dedicated adaptive biasing circuits.

Experimental and numerical analyses about the efficiency of flow through devices for the sediment controll in urban runoff

As land is developed, the impervious surfaces that are created increase the amount of runoff during rainfall events, disrupting the natural hydrologic cycle, with an increment in volume of runoff and in pollutant loadings. Pollutants deposited or derived from an activity on the land surface will likely end up in stormwater runoff in some concentration, such as nutrients, sediment, heavy metals, hydrocarbons, gasoline additives, pathogens, deicers, herbicides and pesticides. Several of these pollutants are particulate-bound, so it appears clear that sediment removal can provide significant water-quality improvements and it appears to be important the knowledge of the ability of stromwater treatment devices to retain particulate matter. For this reason three different units which remove sediments have been tested through laboratory. In particular a roadside gully pot has been tested under steady hydraulic conditions, varying the characteristics of the influent solids (diameter, particle size distribution and specific gravity). The efficiency in terms of particles retained has been evaluated as a function of influent flow rate and particles characteristics; results have been compared to efficiency evaluated applying an overflow rate model. Furthermore the role of particles settling velocity in efficiency determination has been investigated. After the experimental runs on the gully pot, a standard full-scale model of an hydrodynamic separator (HS) has been tested under unsteady influent flow rate condition, and constant solid concentration at the input. The results presented in this study illustrate that particle separation efficiency of the unit is predominately influenced by operating flow rate, which strongly affects the particles and hydraulic residence time of the system. The efficiency data have been compared to results obtained from a modified overflow rate model; moreover the residence time distribution has been experimentally determined through tracer analyses for several steady flow rates. Finally three testing experiments have been performed for two different configurations of a full-scale model of a clarifier (linear and crenulated) under unsteady influent flow rate condition, and constant solid concentration at the input. The results illustrate that particle separation efficiency of the unit is predominately influenced by the configuration of the unit itself. Turbidity measures have been used to compare turbidity with the suspended sediments concentration, in order to find a correlation between these two values, which can allow to have a measure of the sediments concentration simply installing a turbidity probe.

Contaminazioni tra arte e architettura

Il concetto di contaminazione fra architettura ed arti plastiche e figurative è molto antico. La dicotomia arte-architettura, sancita in via definitiva con il moderno museo di spoliazione napoleonica, non può che essere considerata una variazione neo-tecnicista sulla quale, non sempre giustamente, sono andati assestandosi gli insegnamenti delle scuole politecniche. Non così è sempre stato. Come il tempio greco può essere considerato un’opera plastica nel suo complesso, esempio tra i primi di fusione tra arte e architettura, moltissimi sono gli esempi che hanno guidato la direzione della ricerca che si è intesa perseguire. Molti sono gli esempi del passato che ci presentano figure di architetto-artista: un esempio fra tutti Michelangelo Buonarroti; come per altro non è nuovo, per l’artista puro, cimentarsi nella progettazione dello spazio architettonico o urbano, o per l'architetto essere coinvolto dalle indagini della ricerca artistica a lui contemporanea dalla quale trarre suggestioni culturali. Le rappresentazioni dei linguaggi visivi sono il frutto di contaminazioni che avvengono su diversi livelli e in più direzioni. Spesso le ricerche artistiche più significative hanno anticipato o influenzato il mondo del design, dell’architettura, della comunicazione. L’intenzione della ricerca è stata quindi approfondire, attraverso un viaggio nel Novecento, con particolare attenzione al Secondo Dopoguerra, i fenomeni culturali che hanno prodotto i più significativi sviluppi stilistici nell’ambito della ricerca e del rinnovo del linguaggio architettonico. Il compito, parafrasando Leonardo Benevolo, non è stato quello di elencare le singole battute della discussione ma di riconoscere gli interventi fruttuosi a lunga scadenza. Mutuando gli insegnamenti della scuola del Bauhaus, arte e architettura sono state affiancate perché considerate espressioni strettamente relazionate di coevi fenomeni culturali. L’obiettivo ha puntato all’individuazione dei meccanismi delle interazioni tra discipline, cercando di delineare il profilo della complessità dell’espressione del contemporaneo in architettura.