Diversified applications of supplemental LED light for greenhouse tomato production in the Mediterranean context

Among the various aspects to be investigated for a technological and productive upgrade of tomato greenhouse production in the Mediterranean area, the application of supplementary LED interlighting still shows limited interest. However, high-density tomato cultivation with intensive high-wire systems could lead to mutual shading and consequent reduction in photosynthesis and yield, even in case of appreciable amounts of external solar radiation, as in Southern Europe. Applications of interest could also involve off-season production or Building-Integrated Agriculture (BIA) such as rooftop greenhouses, where municipal regulations for structure and fire safety could limit the incoming radiation in the growing area. The aim of this research was to investigate diversified applications of supplemental LED interlighting for greenhouse tomato production (Solanum lycopersicum) in the Mediterranean countries. The diversified applications included: effects on post-harvest quality, shading reduction in BIA, tailored seedlings production, and off-season cultivation. The results showed that the application of supplemental LED light on greenhouse-grown tomato in Mediterranean countries (Italy and Spain) has potential to foster diverse applications. In particular, it can increase production in case of the limited solar radiation in rooftop greenhouses, maintain quality and reduce losses during post-harvest, help producing high quality and tailored seedlings, and increase yield during wintertime. Despite the positive results obtained, some aspects of the application of additional LED light in Southern Europe countries still need to be deepened and improved. In particular, given the current increase of electricity cost, future research should focus on more economically valuable methods of managing supplemental lighting, such as the application of shorter photoperiods or lower intensities, or techniques that can provide energy savings such as the pulsed light.

Troposphere Calibration Techniques for Deep Space Probe Tracking

Ground-based Earth troposphere calibration systems play an important role in planetary exploration, especially to carry out radio science experiments aimed at the estimation of planetary gravity fields. In these experiments, the main observable is the spacecraft (S/C) range rate, measured from the Doppler shift of an electromagnetic wave transmitted from ground, received by the spacecraft and coherently retransmitted back to ground. If the solar corona and interplanetary plasma noise is already removed from Doppler data, the Earth troposphere remains one of the main error sources in tracking observables. Current Earth media calibration systems at NASA’s Deep Space Network (DSN) stations are based upon a combination of weather data and multidirectional, dual frequency GPS measurements acquired at each station complex. In order to support Cassini’s cruise radio science experiments, a new generation of media calibration systems were developed, driven by the need to achieve the goal of an end-to-end Allan deviation of the radio link in the order of 3×〖10〗^(-15) at 1000 s integration time. The future ESA’s Bepi Colombo mission to Mercury carries scientific instrumentation for radio science experiments (a Ka-band transponder and a three-axis accelerometer) which, in combination with the S/C telecommunication system (a X/X/Ka transponder) will provide the most advanced tracking system ever flown on an interplanetary probe. Current error budget for MORE (Mercury Orbiter Radioscience Experiment) allows the residual uncalibrated troposphere to contribute with a value of 8×〖10〗^(-15) to the two-way Allan deviation at 1000 s integration time. The current standard ESA/ESTRACK calibration system is based on a combination of surface meteorological measurements and mathematical algorithms, capable to reconstruct the Earth troposphere path delay, leaving an uncalibrated component of about 1-2% of the total delay. In order to satisfy the stringent MORE requirements, the short time-scale variations of the Earth troposphere water vapor content must be calibrated at ESA deep space antennas (DSA) with more precise and stable instruments (microwave radiometers). In parallel to this high performance instruments, ESA ground stations should be upgraded to media calibration systems at least capable to calibrate both troposphere path delay components (dry and wet) at sub-centimetre level, in order to reduce S/C navigation uncertainties. The natural choice is to provide a continuous troposphere calibration by processing GNSS data acquired at each complex by dual frequency receivers already installed for station location purposes. The work presented here outlines the troposphere calibration technique to support both Deep Space probe navigation and radio science experiments. After an introduction to deep space tracking techniques, observables and error sources, in Chapter 2 the troposphere path delay is widely investigated, reporting the estimation techniques and the state of the art of the ESA and NASA troposphere calibrations. Chapter 3 deals with an analysis of the status and the performances of the NASA Advanced Media Calibration (AMC) system referred to the Cassini data analysis. Chapter 4 describes the current release of a developed GNSS software (S/W) to estimate the troposphere calibration to be used for ESA S/C navigation purposes. During the development phase of the S/W a test campaign has been undertaken in order to evaluate the S/W performances. A description of the campaign and the main results are reported in Chapter 5. Chapter 6 presents a preliminary analysis of microwave radiometers to be used to support radio science experiments. The analysis has been carried out considering radiometric measurements of the ESA/ESTEC instruments installed in Cabauw (NL) and compared with the requirements of MORE. Finally, Chapter 7 summarizes the results obtained and defines some key technical aspects to be evaluated and taken into account for the development phase of future instrumentation.

The new Beam Halo Monitor for the CMS experiment at the LHC

In the context of increasing beam energy and luminosity of the LHC accelerator at CERN, it will be important to accurately measure the Machine Induced Background. A new monitoring system will be installed in the CMS cavern for measuring the beam background at high radius. This detector, called the Beam Halo Monitor, will provide an online, bunch-by-bunch measurement of background induced by beam halo interactions, separately for each beam. The detector is composed of synthetic quartz Cherenkov radiators, coupled to fast UV sensitive photomultiplier tubes. The directional and fast response of the system allows the discrimination of the background particles from the dominant flux in the cavern induced by pp collision debris, produced within the 25 ns bunch spacing. The readout electronics of this detector will make use of many components developed for the upgrade of the CMS Hadron Calorimeter electronics, with a dedicated firmware and readout adapted to the beam monitoring requirements. The PMT signal will be digitized by a charge integrating ASIC, providing both the signal rise time and the charge integrated over one bunch crossing. The backend electronics will record bunch-by-bunch histograms, which will be published to CMS and the LHC using the newly designed CMS beam instrumentation specific DAQ. A calibration and monitoring system has been designed to generate triggered pulses of UV light to monitor the efficiency of the system. The experimental results validating the design of the detector, the calibration system and the electronics will be presented.

Tools and methods for the quality assurance of force platforms in human movement analysis

The human movement analysis (HMA) aims to measure the abilities of a subject to stand or to walk. In the field of HMA, tests are daily performed in research laboratories, hospitals and clinics, aiming to diagnose a disease, distinguish between disease entities, monitor the progress of a treatment and predict the outcome of an intervention [Brand and Crowninshield, 1981; Brand, 1987; Baker, 2006]. To achieve these purposes, clinicians and researchers use measurement devices, like force platforms, stereophotogrammetric systems, accelerometers, baropodometric insoles, etc. This thesis focus on the force platform (FP) and in particular on the quality assessment of the FP data. The principal objective of our work was the design and the experimental validation of a portable system for the in situ calibration of FPs. The thesis is structured as follows: Chapter 1. Description of the physical principles used for the functioning of a FP: how these principles are used to create force transducers, such as strain gauges and piezoelectrics transducers. Then, description of the two category of FPs, three- and six-component, the signals acquisition (hardware structure), and the signals calibration. Finally, a brief description of the use of FPs in HMA, for balance or gait analysis. Chapter 2. Description of the inverse dynamics, the most common method used in the field of HMA. This method uses the signals measured by a FP to estimate kinetic quantities, such as joint forces and moments. The measures of these variables can not be taken directly, unless very invasive techniques; consequently these variables can only be estimated using indirect techniques, as the inverse dynamics. Finally, a brief description of the sources of error, present in the gait analysis. Chapter 3. State of the art in the FP calibration. The selected literature is divided in sections, each section describes: systems for the periodic control of the FP accuracy; systems for the error reduction in the FP signals; systems and procedures for the construction of a FP. In particular is detailed described a calibration system designed by our group, based on the theoretical method proposed by ?. This system was the “starting point” for the new system presented in this thesis. Chapter 4. Description of the new system, divided in its parts: 1) the algorithm; 2) the device; and 3) the calibration procedure, for the correct performing of the calibration process. The algorithm characteristics were optimized by a simulation approach, the results are here presented. In addiction, the different versions of the device are described. Chapter 5. Experimental validation of the new system, achieved by testing it on 4 commercial FPs. The effectiveness of the calibration was verified by measuring, before and after calibration, the accuracy of the FPs in measuring the center of pressure of an applied force. The new system can estimate local and global calibration matrices; by local and global calibration matrices, the non–linearity of the FPs was quantified and locally compensated. Further, a non–linear calibration is proposed. This calibration compensates the non– linear effect in the FP functioning, due to the bending of its upper plate. The experimental results are presented. Chapter 6. Influence of the FP calibration on the estimation of kinetic quantities, with the inverse dynamics approach. Chapter 7. The conclusions of this thesis are presented: need of a calibration of FPs and consequential enhancement in the kinetic data quality. Appendix: Calibration of the LC used in the presented system. Different calibration set–up of a 3D force transducer are presented, and is proposed the optimal set–up, with particular attention to the compensation of non–linearities. The optimal set–up is verified by experimental results.

LBT AO system: tests and calibration

An Adaptive Optic (AO) system is a fundamental requirement of 8m-class telescopes. We know that in order to obtain the maximum possible resolution allowed by these telescopes we need to correct the atmospheric turbulence. Thanks to adaptive optic systems we are able to use all the effective potential of these instruments, drawing all the information from the universe sources as best as possible. In an AO system there are two main components: the wavefront sensor (WFS) that is able to measure the aberrations on the incoming wavefront in the telescope, and the deformable mirror (DM) that is able to assume a shape opposite to the one measured by the sensor. The two subsystem are connected by the reconstructor (REC). In order to do this, the REC requires a “common language" between these two main AO components. It means that it needs a mapping between the sensor-space and the mirror-space, called an interaction matrix (IM). Therefore, in order to operate correctly, an AO system has a main requirement: the measure of an IM in order to obtain a calibration of the whole AO system. The IM measurement is a 'mile stone' for an AO system and must be done regardless of the telescope size or class. Usually, this calibration step is done adding to the telescope system an auxiliary artificial source of light (i.e a fiber) that illuminates both the deformable mirror and the sensor, permitting the calibration of the AO system. For large telescope (more than 8m, like Extremely Large Telescopes, ELTs) the fiber based IM measurement requires challenging optical setups that in some cases are also impractical to build. In these cases, new techniques to measure the IM are needed. In this PhD work we want to check the possibility of a different method of calibration that can be applied directly on sky, at the telescope, without any auxiliary source. Such a technique can be used to calibrate AO system on a telescope of any size. We want to test the new calibration technique, called “sinusoidal modulation technique”, on the Large Binocular Telescope (LBT) AO system, which is already a complete AO system with the two main components: a secondary deformable mirror with by 672 actuators, and a pyramid wavefront sensor. My first phase of PhD work was helping to implement the WFS board (containing the pyramid sensor and all the auxiliary optical components) working both optical alignments and tests of some optical components. Thanks to the “solar tower” facility of the Astrophysical Observatory of Arcetri (Firenze), we have been able to reproduce an environment very similar to the telescope one, testing the main LBT AO components: the pyramid sensor and the secondary deformable mirror. Thanks to this the second phase of my PhD thesis: the measure of IM applying the sinusoidal modulation technique. At first we have measured the IM using a fiber auxiliary source to calibrate the system, without any kind of disturbance injected. After that, we have tried to use this calibration technique in order to measure the IM directly “on sky”, so adding an atmospheric disturbance to the AO system. The results obtained in this PhD work measuring the IM directly in the Arcetri solar tower system are crucial for the future development: the possibility of the acquisition of IM directly on sky means that we are able to calibrate an AO system also for extremely large telescope class where classic IM measurements technique are problematic and, sometimes, impossible. Finally we have not to forget the reason why we need this: the main aim is to observe the universe. Thanks to these new big class of telescopes and only using their full capabilities, we will be able to increase our knowledge of the universe objects observed, because we will be able to resolve more detailed characteristics, discovering, analyzing and understanding the behavior of the universe components.

The photosynthetic bacterial reaction center in native and artificial envirnoments: effects on light-induced electron transfer

In this thesis we focussed on the characterization of the reaction center (RC) protein purified from the photosynthetic bacterium Rhodobacter sphaeroides. In particular, we discussed the effects of native and artificial environment on the light-induced electron transfer processes. The native environment consist of the inner antenna LH1 complex that copurifies with the RC forming the so called core complex, and the lipid phase tightly associated with it. In parallel, we analyzed the role of saccharidic glassy matrices on the interplay between electron transfer processes and internal protein dynamics. As a different artificial matrix, we incorporated the RC protein in a layer-by-layer structure with a twofold aim: to check the behaviour of the protein in such an unusual environment and to test the response of the system to herbicides. By examining the RC in its native environment, we found that the light-induced charge separated state P+QB - is markedly stabilized (by about 40 meV) in the core complex as compared to the RC-only system over a physiological pH range. We also verified that, as compared to the average composition of the membrane, the core complex copurifies with a tightly bound lipid complement of about 90 phospholipid molecules per RC, which is strongly enriched in cardiolipin. In parallel, a large ubiquinone pool was found in association with the core complex, giving rise to a quinone concentration about ten times larger than the average one in the membrane. Moreover, this quinone pool is fully functional, i.e. it is promptly available at the QB site during multiple turnover excitation of the RC. The latter two observations suggest important heterogeneities and anisotropies in the native membranes which can in principle account for the stabilization of the charge separated state in the core complex. The thermodynamic and kinetic parameters obtained in the RC-LH1 complex are very close to those measured in intact membranes, indicating that the electron transfer properties of the RC in vivo are essentially determined by its local environment. The studies performed by incorporating the RC into saccharidic matrices evidenced the relevance of solvent-protein interactions and dynamical coupling in determining the kinetics of electron transfer processes. The usual approach when studying the interplay between internal motions and protein function consists in freezing the degrees of freedom of the protein at cryogenic temperature. We proved that the “trehalose approach” offers distinct advantages with respect to this traditional methodology. We showed, in fact, that the RC conformational dynamics, coupled to specific electron transfer processes, can be modulated by varying the hydration level of the trehalose matrix at room temperature, thus allowing to disentangle solvent from temperature effects. The comparison between different saccharidic matrices has revealed that the structural and dynamical protein-matrix coupling depends strongly upon the sugar. The analyses performed in RCs embedded in polyelectrolyte multilayers (PEM) structures have shown that the electron transfer from QA - to QB, a conformationally gated process extremely sensitive to the RC environment, can be strongly modulated by the hydration level of the matrix, confirming analogous results obtained for this electron transfer reaction in sugar matrices. We found that PEM-RCs are a very stable system, particularly suitable to study the thermodynamics and kinetics of herbicide binding to the QB site. These features make PEM-RC structures quite promising in the development of herbicide biosensors. The studies discussed in the present thesis have shown that, although the effects on electron transfer induced by the native and artificial environments tested are markedly different, they can be described on the basis of a common kinetic model which takes into account the static conformational heterogeneity of the RC and the interconversion between conformational substates. Interestingly, the same distribution of rate constants (i.e. a Gamma distribution function) can describe charge recombination processes in solutions of purified RC, in RC-LH1 complexes, in wet and dry RC-PEM structures and in glassy saccharidic matrices over a wide range of hydration levels. In conclusion, the results obtained for RCs in different physico-chemical environments emphasize the relevance of the structure/dynamics solvent/protein coupling in determining the energetics and the kinetics of electron transfer processes in a membrane protein complex.

Light energy management in peach: utilization, photoprotection , photodamage and recovery. Maximizing light absorption in orchard is not always the best solution

The relation between the intercepted light and orchard productivity was considered linear, although this dependence seems to be more subordinate to planting system rather than light intensity. At whole plant level not always the increase of irradiance determines productivity improvement. One of the reasons can be the plant intrinsic un-efficiency in using energy. Generally in full light only the 5 – 10% of the total incoming energy is allocated to net photosynthesis. Therefore preserving or improving this efficiency becomes pivotal for scientist and fruit growers. Even tough a conspicuous energy amount is reflected or transmitted, plants can not avoid to absorb photons in excess. The chlorophyll over-excitation promotes the reactive species production increasing the photoinhibition risks. The dangerous consequences of photoinhibition forced plants to evolve a complex and multilevel machine able to dissipate the energy excess quenching heat (Non Photochemical Quenching), moving electrons (water-water cycle , cyclic transport around PSI, glutathione-ascorbate cycle and photorespiration) and scavenging the generated reactive species. The price plants must pay for this equipment is the use of CO2 and reducing power with a consequent decrease of the photosynthetic efficiency, both because some photons are not used for carboxylation and an effective CO2 and reducing power loss occurs. Net photosynthesis increases with light until the saturation point, additional PPFD doesn’t improve carboxylation but it rises the efficiency of the alternative pathways in energy dissipation but also ROS production and photoinhibition risks. The wide photo-protective apparatus, although is not able to cope with the excessive incoming energy, therefore photodamage occurs. Each event increasing the photon pressure and/or decreasing the efficiency of the described photo-protective mechanisms (i.e. thermal stress, water and nutritional deficiency) can emphasize the photoinhibition. Likely in nature a small amount of not damaged photosystems is found because of the effective, efficient and energy consuming recovery system. Since the damaged PSII is quickly repaired with energy expense, it would be interesting to investigate how much PSII recovery costs to plant productivity. This PhD. dissertation purposes to improve the knowledge about the several strategies accomplished for managing the incoming energy and the light excess implication on photo-damage in peach. The thesis is organized in three scientific units. In the first section a new rapid, non-intrusive, whole tissue and universal technique for functional PSII determination was implemented and validated on different kinds of plants as C3 and C4 species, woody and herbaceous plants, wild type and Chlorophyll b-less mutant and monocot and dicot plants. In the second unit, using a “singular” experimental orchard named “Asymmetric orchard”, the relation between light environment and photosynthetic performance, water use and photoinhibition was investigated in peach at whole plant level, furthermore the effect of photon pressure variation on energy management was considered on single leaf. In the third section the quenching analysis method suggested by Kornyeyev and Hendrickson (2007) was validate on peach. Afterwards it was applied in the field where the influence of moderate light and water reduction on peach photosynthetic performances, water requirements, energy management and photoinhibition was studied. Using solar energy as fuel for life plant is intrinsically suicidal since the high constant photodamage risk. This dissertation would try to highlight the complex relation existing between plant, in particular peach, and light analysing the principal strategies plants developed to manage the incoming light for deriving the maximal benefits as possible minimizing the risks. In the first instance the new method proposed for functional PSII determination based on P700 redox kinetics seems to be a valid, non intrusive, universal and field-applicable technique, even because it is able to measure in deep the whole leaf tissue rather than the first leaf layers as fluorescence. Fluorescence Fv/Fm parameter gives a good estimate of functional PSII but only when data obtained by ad-axial and ab-axial leaf surface are averaged. In addition to this method the energy quenching analysis proposed by Kornyeyev and Hendrickson (2007), combined with the photosynthesis model proposed by von Caemmerer (2000) is a forceful tool to analyse and study, even in the field, the relation between plant and environmental factors such as water, temperature but first of all light. “Asymmetric” training system is a good way to study light energy, photosynthetic performance and water use relations in the field. At whole plant level net carboxylation increases with PPFD reaching a saturating point. Light excess rather than improve photosynthesis may emphasize water and thermal stress leading to stomatal limitation. Furthermore too much light does not promote net carboxylation improvement but PSII damage, in fact in the most light exposed plants about 50-60% of the total PSII is inactivated. At single leaf level, net carboxylation increases till saturation point (1000 – 1200 μmolm-2s-1) and light excess is dissipated by non photochemical quenching and non net carboxylative transports. The latter follows a quite similar pattern of Pn/PPFD curve reaching the saturation point at almost the same photon flux density. At middle-low irradiance NPQ seems to be lumen pH limited because the incoming photon pressure is not enough to generate the optimum lumen pH for violaxanthin de-epoxidase (VDE) full activation. Peach leaves try to cope with the light excess increasing the non net carboxylative transports. While PPFD rises the xanthophyll cycle is more and more activated and the rate of non net carboxylative transports is reduced. Some of these alternative transports, such as the water-water cycle, the cyclic transport around the PSI and the glutathione-ascorbate cycle are able to generate additional H+ in lumen in order to support the VDE activation when light can be limiting. Moreover the alternative transports seems to be involved as an important dissipative way when high temperature and sub-optimal conductance emphasize the photoinhibition risks. In peach, a moderate water and light reduction does not determine net carboxylation decrease but, diminishing the incoming light and the environmental evapo-transpiration request, stomatal conductance decreases, improving water use efficiency. Therefore lowering light intensity till not limiting levels, water could be saved not compromising net photosynthesis. The quenching analysis is able to partition absorbed energy in the several utilization, photoprotection and photo-oxidation pathways. When recovery is permitted only few PSII remained un-repaired, although more net PSII damage is recorded in plants placed in full light. Even in this experiment, in over saturating light the main dissipation pathway is the non photochemical quenching; at middle-low irradiance it seems to be pH limited and other transports, such as photorespiration and alternative transports, are used to support photoprotection and to contribute for creating the optimal trans-thylakoidal ΔpH for violaxanthin de-epoxidase. These alternative pathways become the main quenching mechanisms at very low light environment. Another aspect pointed out by this study is the role of NPQ as dissipative pathway when conductance becomes severely limiting. The evidence that in nature a small amount of damaged PSII is seen indicates the presence of an effective and efficient recovery mechanism that masks the real photodamage occurring during the day. At single leaf level, when repair is not allowed leaves in full light are two fold more photoinhibited than the shaded ones. Therefore light in excess of the photosynthetic optima does not promote net carboxylation but increases water loss and PSII damage. The more is photoinhibition the more must be the photosystems to be repaired and consequently the energy and dry matter to allocate in this essential activity. Since above the saturation point net photosynthesis is constant while photoinhibition increases it would be interesting to investigate how photodamage costs in terms of tree productivity. An other aspect of pivotal importance to be further widened is the combined influence of light and other environmental parameters, like water status, temperature and nutrition on peach light, water and phtosyntate management.

Indagine sulla nozione di fatto urbano ne L'architettura della città di Aldo Rossi

Questa tesi di dottorato di ricerca ha come oggetto la nozione di fatto urbano elaborata e presentata da Aldo Rossi nel libro L’architettura della città edito nel 1966. Ne L’architettura della città sono molteplici le definizioni e le forme con cui è enunciata la nozione di fatto urbano. Nel corso della tesi si è indagato come la costruzione nel tempo di questo concetto è stata preceduta da diversi studi giovanili intrapresi dal 1953, poi riorganizzati e sintetizzati a partire dal 1963 in un quaderno manoscritto dal titolo “Manuale di urbanistica”, in diversi appunti e in due quaderni manoscritti. Il lavoro di ricerca ha ricostruito la formulazione della nozione di fatto urbano attraverso gli scritti di Rossi. In questa direzione la rilevazione della partecipazione di Rossi a dibattiti, seminari, riviste, corsi universitari o ricerche accademiche è apparsa di fondamentale importanza, per comprendere la complessità di un lavoro non riconducibile a dei concetti disciplinari, ma alla formazione di una teoria trasmissibile. Il tentativo di comprendere e spiegare la nozione di fatto urbano ha condotto ad esaminare l’accezione con cui Rossi compone L’architettura della città, che egli stesso assimila ad un trattato. L’analisi ha identificato come la composizione del libro non è direttamente riferibile ad un uso classico della stesura editoriale del trattato, la quale ha tra i riferimenti più noti nel passato la promozione di una pratica corretta come nel caso vitruviano o un’impalcatura instauratrice di una nuova categoria come nel caso dell’Alberti. La mancanza di un sistema globale e prescrittivo a differenza dei due libri fondativi e il rimando non immediato alla stesura di un trattato classico è evidente ne L’architettura della città. Tuttavia la possibilità di condurre la ricerca su una serie di documenti inediti ha permesso di rilevare come negli scritti a partire dal 1953, sia maturata una trattazione delle questioni centrali alla nozione di fatto urbano ricca di intuizioni, che aspirano ad un’autonomia, sintetizzate, seppure in modo non sistematico, nella stesura del celebre libro. Si è così cercato di mettere in luce la precisazione nel tempo della nozione di fatto urbano e della sua elaborazione nei molteplici scritti antecedenti la pubblicazione de L’architettura della città, precisando come Rossi, pur costruendo su basi teoriche la nozione di fatto urbano, ne indichi una visione progressiva, ossia un uso operativo sulla città. La ricerca si è proposta come obiettivo di comprendere le radici culturali della nozione di fatto urbano sia tramite un’esplorazione degli interessi di Rossi nel suo percorso formativo sia rispetto alla definizione della struttura materiale del fatto urbano che Rossi individua nelle permanenze e che alimenta nella sua definizione con differenti apporti derivanti da altre discipline. Compito di questa ricerca è stato rileggere criticamente il percorso formativo compiuto da Rossi, a partire dal 1953, sottolinearne gli ambiti innovativi e precisarne i limiti descrittivi che non vedranno mai la determinazione di una nozione esatta, ma piuttosto la strutturazione di una sintesi complessa e ricca di riferimenti ad altri studi. In sintesi la tesi si compone di tre parti: 1. la prima parte, dal titolo “La teoria dei fatti urbani ne L’architettura della città”, analizza il concetto di fatto urbano inserendolo all’interno del più generale contesto teorico contenuto nel libro L’architettura della città. Questo avviene tramite la scomposizione del libro, la concatenazione delle sue argomentazioni e la molteplicità delle fonti esplicitamente citate da Rossi. In questo ambito si precisa la struttura del libro attraverso la rilettura dei riferimenti serviti a Rossi per comporre il suo progetto teorico. Inoltre si ripercorre la sua vita attraverso le varie edizioni, le ristampe, le introduzioni e le illustrazioni. Infine si analizza il ruolo del concetto di fatto urbano nel libro rilevando come sia posto in un rapporto paritetico con il titolo del libro, conseguendone un’accezione di «fatto da osservare» assimilabile all’uso proposto dalla geografia urbana francese dei primi del Novecento. 2. la seconda parte, dal titolo “La formazione della nozione di fatto urbano 1953-66”, è dedicata alla presentazione dell’elaborazione teorica negli scritti di Rossi prima de L’architettura della città, ossia dal 1953 al 1966. Questa parte cerca di descrivere le radici culturali di Rossi, le sue collaborazioni e i suoi interessi ripercorrendo la progressiva definizione della concezione di città nel tempo. Si è analizzato il percorso maturato da Rossi e i documenti scritti fin dagli anni in cui era studente alla Facoltà di Architettura Politecnico di Milano. Emerge un quadro complesso in cui i primi saggi, gli articoli e gli appunti testimoniano una ricerca intellettuale tesa alla costruzione di un sapere sullo sfondo del realismo degli anni Cinquanta. Rossi matura infatti un impegno culturale che lo porta dopo la laurea ad affrontare discorsi più generali sulla città. In particolare la sua importante collaborazione con la rivista Casabella-continuità, con il suo direttore Ernesto Nathan Rogers e tutto il gruppo redazionale segnano il periodo successivo in cui compare l’interesse per la letteratura urbanistica, l’arte, la sociologia, la geografia, l’economia e la filosofia. Seguono poi dal 1963 gli anni di lavoro insieme al gruppo diretto da Carlo Aymonino all’Istituto Universitario di Architettura di Venezia, e in particolare le ricerche sulla tipologia edilizia e la morfologia urbana, che portano Rossi a compiere una sintesi analitica per la fondazione di una teoria della città. Dall’indagine si rileva infatti come gli scritti antecedenti L’architettura della città sviluppano lo studio dei fatti urbani fino ad andare a costituire il nucleo teorico di diversi capitoli del libro. Si racconta così la genesi del libro, la cui scrittura si è svolta nell’arco di due anni, e le aspirazioni che hanno portato quello che era stato concepito come un “manuale d’urbanistica” a divenire quello che Rossi definirà “l’abbozzo di un trattato” per la formulazione di una scienza urbana. 3. la terza parte, dal titolo “La struttura materiale dei fatti urbani: la teoria della permanenza”, indaga monograficamente lo studio della città come un fatto materiale, un manufatto, la cui costruzione è avvenuta nel tempo e del tempo mantiene le tracce. Sul tema della teoria della permanenza è stato importante impostare un confronto con il dibattito vivo negli anni della ricostruzione dopo la guerra intorno ai temi delle preesistenze ambientali nella ricostruzione negli ambienti storici. Sono emersi fin da subito importanti la relazione con Ernesto Nathan Rogers, le discussioni sulle pagine di Casabella-Continuità, la partecipazione ad alcuni dibatti e ricerche. Si è inoltre Rilevato l’uso di diversi termini mutuati dalle tesi filosofiche di alcune personalità come Antonio Banfi e Enzo Paci, poi elaborati dal nucleo redazionale di Casabella-Continuità, di cui faceva parte anche Rossi. Sono così emersi alcuni spostamenti di senso e la formulazione di un vocabolario di termini all’interno della complessa vicenda della cultura architettonica degli anni Cinquanta e Sessanta. 1. Si è poi affrontato questo tema analizzando le forme con cui Rossi presenta la definizione della teoria della permanenza e i contributi desunti da alcuni autori per la costruzione scientifica di una teoria dell’architettura, il cui fine è quello di essere trasmissibile e di offrire strumenti di indagine concreti. Questa ricerca ha permesso di ipotizzare come il lavoro dei geografi francesi della prima metà del XX secolo, e in particolare il contributo più rilevante di Marcel Poëte e di Pierre Lavedan, costituiscono le fonti principali e il campo d’indagine maggiormente esplorato da Rossi per definire la teoria della permanenza e i monumenti. Le permanenze non sono dunque presentate ne L’architettura della città come il “tutto”, ma emergono da un metodo che sceglie di isolare i fatti urbani permanenti, consentendo così di compiere un’ipotesi su “ciò che resta” dopo le trasformazioni continue che operano nella città. Le fonti su cui ho lavorato sono state quelle annunciate da Rossi ne L’architettura della città, e più precisamente i testi nelle edizioni da lui consultate. Anche questo lavoro ha permesso un confronto dei testi che ha fatto emergere ne L’architettura della città l’uso di termini mutuati da linguaggi appartenenti ad altre discipline e quale sia l’uso di concetti estrapolati nella loro interezza. Presupposti metodologici Della formulazione della nozione di fatto urbano si sono indagate l’originalità dell’espressione, le connessioni presunte o contenute negli studi di Rossi sulla città attraverso la raccolta di fonti dirette e indirette che sono andate a formare un notevole corpus di scritti. Le fonti dirette più rilevanti sono state trovare nelle collezioni speciali del Getty Research Institute di Los Angeles in cui sono conservati gli Aldo Rossi Papers, questo archivio comprende materiali inediti dal 1954 al 1988. La natura dei materiali si presenta sotto forma di manoscritti, dattiloscritti, quaderni, documenti ciclostilati, appunti sparsi e una notevole quantità di corrispondenza. Negli Aldo Rossi Papers si trovano anche 32 dei 47 Quaderni Azzurri, le bozze de L’architettura della città e dell’ Autobiografia Scientifica. Per quanto riguarda in particolare L’architettura della città negli Aldo Rossi Papers sono conservati: un quaderno con il titolo “Manuale d’urbanistica, giugno 1963”, chiara prima bozza del libro, degli “Appunti per libro urbanistica estate/inverno 1963”, un quaderno con la copertina rossa datato 20 settembre 1964-8 agosto 1965 e un quaderno con la copertina blu datato 30 agosto 1965-15 dicembre 1965. La possibilità di accedere a questo archivio ha permesso di incrementare la bibliografia relativa agli studi giovanili consentendo di rileggere il percorso culturale in cui Rossi si è formato. E’ così apparsa fondamentale la rivalutazione di alcune questioni relative al realismo socialista che hanno portato a formare un più preciso quadro dei primi scritti di Rossi sullo sfondo di un complesso scenario intellettuale. A questi testi si è affiancata la raccolta delle ricerche universitarie, degli articoli pubblicati su riviste specializzate e degli interventi a dibattiti e seminari. A proposito de L’architettura della città si è raccolta un’ampia letteratura critica riferita sia al testo in specifico che ad una sua collocazione nella storia dell’architettura, mettendo in discussione alcune osservazioni che pongono L’architettura della città come un libro risolutivo e definitivo. Per quanto riguarda il capitolo sulla teoria della permanenza l’analisi è stata svolta a partire dai testi che Rossi stesso indicava ne L’architettura della città rivelando i diversi apporti della letteratura urbanistica francese, e permettendo alla ricerca di precisare le relazioni con alcuni scritti centrali e al contempo colti da Rossi come opportunità per intraprendere l’elaborazione dell’idea di tipo. Per quest’ultima parte si può precisare come Rossi formuli la sua idea di tipo in un contesto culturale dove l’interesse per questo tema era fondamentale. Dunque le fonti che hanno assunto maggior rilievo in quest’ultima fase emergono da un ricco panorama in cui Rossi compie diverse ricerche sia con il gruppo redazionale di Casabella-continuità, sia all’interno della scuola veneziana negli anni Sessanta, ma anche negli studi per l’ILSES e per l’Istituto Nazionale d’Urbanistica. RESEARCH ON THE NOTION OF URBAN ARTIFACT IN THE ARCHITECTURE OF THE CITY BY ALDO ROSSI. Doctoral candidate: Letizia Biondi Tutor: Valter Balducci The present doctoral dissertation deals with the notion of urban artifact that was formulated and presented by Aldo Rossi in his book The Architecture of the City, published in 1966. In The Architecture of the City, the notion of urban artifact is enunciated through a wide range of definitions and forms. In this thesis, a research was done on how the construction of this concept over time was preceded by various studies started in 1953 during the author’s youth, then re-organized and synthesized since 1963 in a manuscript titled “Manual of urban planning” and in two more manuscripts later on. The work of research re-constructed the formulation of the notion of urban artifact through Rossi’s writings. In this sense, the examination of Rossi’s participation in debates, seminars, reviews, university courses or academic researches was of fundamental importance to understand the complexity of a work which is not to be attributed to disciplinary concepts, but to the formulation of a communicable theory. The effort to understand and to explain the notion of urban artifact led to an examination of the meaning used by Rossi to compose The Architecture of the City, which he defines as similar to a treatise. Through this analysis, it emerged that the composition of the book is not directly ascribable to the classical use of editorial writing of a treatise, whose most famous references in the past are the promotion of a correct practice as in the case of Vitruvio’s treatise, or the use of a structure that introduces a new category as in the Alberti case. Contrary to the two founding books, the lack of a global and prescriptive system and the not immediate reference to the writing of a classical treatise are evident in The Architecture of the City. However, the possibility of researching on some unpublished documents allowed to discover that in the writings starting from 1953 the analysis of the questions that are at the core of the notion of urban artifact is rich of intuitions, that aim to autonomy and that would be synthesized, even though not in a systematic way, in his famous book. The attempt was that of highlighting the specification over time of the notion of urban artifact and its elaboration in the various writings preceding the publication of The Architecture of the City. It was also specified that, despite building on theoretical grounds, Rossi indicates a progressive version of the notion of urban artifact, that is a performing use in the city. The present research aims to understand the cultural roots of the notion of urban artifact in two main directions: analyzing, firstly, Rossi’s interests along his formation path and, secondly, the definition of material structure of an urban artifact identified by Rossi in the permanences and enriched by various contributions from other disciplines. The purpose of the present research is to revise the formation path made by Rossi in a critical way, starting by 1953, underlining its innovative aspects and identifying its describing limits, which will never lead to the formulation of an exact notion, but rather to the elaboration of a complex synthesis, enriched by references to other studies. In brief, the thesis is composed of three parts: 1. The first part, titled “The Theory of urban artifacts in The Architecture of the City”, analyzes the concept of urban artifact in the more general theoretical context of the book The Architecture of the City. Such analysis is done by “disassembling” the book, and by linking together the argumentations and the multiplicity of the sources which are explicitly quoted by Rossi. In this context, the book’s structure is defined more precisely through the revision of the references used by Rossi to compose his theoretical project. Moreover, the author’s life is traced back through the various editions, re-printings, introductions and illustrations. Finally, it is specified which role the concept of urban artifact has in the book, pointing out that it is placed in an equal relation with the book’s title; by so doing, the concept of urban artifact gets the new meaning of “fact to be observed”, similar to the use that was suggested by the French urban geography at the beginning of the 20th century. 2. The second part, titled “The formation of the notion of urban artifact 1953-66”, introduces the theoretical elaboration in Rossi’s writings before The Architecture of the City, that is from 1953 to 1966. This part tries to describe Rossi’s cultural roots, his collaborations and his interests, tracing back the progressive definition of his conception of city over time. The analysis focuses on the path followed by Rossi and on the documents that he wrote since the years as a student at the Department of Architecture at the Politecnico in Milan. This leads to a complex scenario of first essays, articles and notes that bear witness to the intellectual research aiming to the construction of a knowledge on the background of the Realism of the 1950s. Rossi develops, in fact, a cultural engagement that leads him after his studies to deal with more general issues about the city. In particular, his important collaboration with the architecture magazine “Casabella-continuità”, with the director Ernesto Nathan Rogers and with the whole redaction staff mark the following period when he starts getting interested in city planning literature, art, sociology, geography, economics and philosophy. Since 1963, Rossi has worked with the group directed by Carlo Aymonino at the “Istituto Universitario di Architettura” (University Institute of Architecture) in Venice, especially researching on building typologies and urban morphology. During these years, Rossi elaborates an analytical synthesis for the formulation of a theory about the city. From the present research, it is evident that the writings preceding The Architecture of the City develop the studies on urban artifacts, which will become theoretical core of different chapters of the book. In conclusion, the genesis of the book is described; written in two years, what was conceived to be an “urban planning manual” became a “treatise draft” for the formulation of an urban science, as Rossi defines it. 3. The third part is titled “The material structure of urban artifacts: the theory of permanence”. This research is made on the study of the city as a material fact, a manufacture, whose construction was made over time, bearing the traces of time. As far as the topic of permanence is concerned, it was also important to draw a comparison with the debate about the issues of environmental pre-existence of re-construction in historical areas, which was very lively during the years of the Reconstruction. Right from the beginning, of fundamental importance were the relationship with Ernesto Nathan Rogers, the discussions on the pages of Casabella-Continuità and the participation to some debates and researches. It is to note that various terms were taken by the philosophical thesis by some personalities such as Antonio Banfi and Enzo Paci, and then re-elaborated by the redaction staff at Casabella-Continuità, which Rossi took part in as well. Through this analysis, it emerged that there were some shifts in meaning and the formulation of a vocabulary of terms within the complex area of the architectonic culture in the 1950s and 1960s. Then, I examined the shapes in which Rossi introduces the definition of the theory of permanence and the references by some authors for the scientific construction of an architecture theory whose aim is being communicable and offering concrete research tools. Such analysis allowed making a hypothesis about the significance for Rossi of the French geographers of the first half of the 20th century: in particular, the work by Marcel Poëte and by Pierre Lavedan is the main source and the research area which Rossi mostly explored to define the theory of permanence and monuments. Therefore, in The Architecture of the City, permanencies are not presented as the “whole”, but they emerge from a method which isolates permanent urban artifacts, in this way allowing making a hypothesis on “what remains” after the continuous transformations made in the city. The sources examined were quoted by Rossi in The Architecture of the City; in particular I analyzed them in the same edition which Rossi referred to. Through such an analysis, it was possible to make a comparison of the texts with one another, which let emerge the use of terms taken by languages belonging to other disciplines in The Architecture of the City and which the use of wholly extrapolated concepts is. Methodological premises As far as the formulation of the notion of urban artifact is concerned, the analysis focuses on the originality of the expression, the connections that are assumed or contained in Rossi’s writings about the city, by collecting direct and indirect sources which formed a significant corpus of writings. The most relevant direct sources were found in the special collections of the Getty Research Institute in Los Angeles, where the “Aldo Rossi Papers” are conserved. This archive contains unpublished material from 1954 to 1988, such as manuscripts, typescripts, notebooks, cyclostyled documents, scraps and notes, and several letters. In the Aldo Rossi Papers there are also 32 out of the 47 Light Blue Notebooks (Quaderni Azzurri), the rough drafts of The Architecture of the City and of the “A Scientific Autobiography”. As regards The Architecture of the City in particular, the Aldo Rossi Papers preserve: a notebook by the title of “Urban planning manual, June, 1963”, which is an explicit first draft of the book; “Notes for urban planning book summer/winter 1963”; a notebook with a red cover dated September 20th, 1964 – August 8th, 1965; and a notebook with a blue cover dated August 30th, 1965 – December 15th, 1965. The possibility of accessing this archive allowed to increase the bibliography related to the youth studies, enabling a revision of the cultural path followed by Rossi’s education. To that end, it was fundamental to re-evaluate some issues linked to the socialist realism which led to a more precise picture of the first writings by Rossi against the background of the intellectual scenario where he formed. In addition to these texts, the collection of university researches, the articles published on specialized reviews and the speeches at debates and seminars were also examined. About The Architecture of the City, a wide-ranging critical literature was collected, related both to the text specifics and to its collocation in the story of architecture, questioning some observations which define The Architecture of the City as a conclusive and definite book. As far as the chapter on the permanence theory is concerned, the analysis started by the texts that Rossi indicated in The Architecture of the City, revealing the different contributions from the French literature on urban planning. This allowed to the present research a more specific definition of the connections to some central writings which, at the same time, were seen by Rossi as an opportunity to start up the elaboration of the idea of type. For this last part, it can be specified that Rossi formulates his idea of type in a cultural context where the interest in this topic was fundamental. Therefore, the sources which played a central role in this final phase emerge from an extensive panorama in which Rossi researched not only with the redaction staff at Casablanca-continuità and within the School of Venice in the 1960s, but also in his studies for the ILSES (Institute of the Region Lombardia for Economics and Social Studies) and for the National Institute of Urban Planning.

Physiology and Biotechnology of the Hydrogen Production with the Green Microalga Chlamydomonas reinhardtii

The hydrogen production in the green microalga Chlamydomonas reinhardtii was evaluated by means of a detailed physiological and biotechnological study. First, a wide screening of the hydrogen productivity was done on 22 strains of C. reinhardtii, most of which mutated at the level of the D1 protein. The screening revealed for the first time that mutations upon the D1 protein may result on an increased hydrogen production. Indeed, productions ranged between 0 and more than 500 mL hydrogen per liter of culture (Torzillo, Scoma et al., 2007a), the highest producer (L159I-N230Y) being up to 5 times more performant than the strain cc124 widely adopted in literature (Torzillo, Scoma, et al., 2007b). Improved productivities by D1 protein mutants were generally a result of high photosynthetic capabilities counteracted by high respiration rates. Optimization of culture conditions were addressed according to the results of the physiological study of selected strains. In a first step, the photobioreactor (PBR) was provided with a multiple-impeller stirring system designed, developed and tested by us, using the strain cc124. It was found that the impeller system was effectively able to induce regular and turbulent mixing, which led to improved photosynthetic yields by means of light/dark cycles. Moreover, improved mixing regime sustained higher respiration rates, compared to what obtained with the commonly used stir bar mixing system. As far as the results of the initial screening phase are considered, both these factors are relevant to the hydrogen production. Indeed, very high energy conversion efficiencies (light to hydrogen) were obtained with the impeller device, prooving that our PBR was a good tool to both improve and study photosynthetic processes (Giannelli, Scoma et al., 2009). In the second part of the optimization, an accurate analysis of all the positive features of the high performance strain L159I-N230Y pointed out, respect to the WT, it has: (1) a larger chlorophyll optical cross-section; (2) a higher electron transfer rate by PSII; (3) a higher respiration rate; (4) a higher efficiency of utilization of the hydrogenase; (5) a higher starch synthesis capability; (6) a higher per cell D1 protein amount; (7) a higher zeaxanthin synthesis capability (Torzillo, Scoma et al., 2009). These information were gathered with those obtained with the impeller mixing device to find out the best culture conditions to optimize productivity with strain L159I-N230Y. The main aim was to sustain as long as possible the direct PSII contribution, which leads to hydrogen production without net CO2 release. Finally, an outstanding maximum rate of 11.1 ± 1.0 mL/L/h was reached and maintained for 21.8 ± 7.7 hours, when the effective photochemical efficiency of PSII (ΔF/F'm) underwent a last drop to zero. If expressed in terms of chl (24.0 ± 2.2 µmoles/mg chl/h), these rates of production are 4 times higher than what reported in literature to date (Scoma et al., 2010a submitted). DCMU addition experiments confirmed the key role played by PSII in sustaining such rates. On the other hand, experiments carried out in similar conditions with the control strain cc124 showed an improved final productivity, but no constant PSII direct contribution. These results showed that, aside from fermentation processes, if proper conditions are supplied to selected strains, hydrogen production can be substantially enhanced by means of biophotolysis. A last study on the physiology of the process was carried out with the mutant IL. Although able to express and very efficiently utilize the hydrogenase enzyme, this strain was unable to produce hydrogen when sulfur deprived. However, in a specific set of experiments this goal was finally reached, pointing out that other than (1) a state 1-2 transition of the photosynthetic apparatus, (2) starch storage and (3) anaerobiosis establishment, a timely transition to the hydrogen production is also needed in sulfur deprivation to induce the process before energy reserves are driven towards other processes necessary for the survival of the cell. This information turned out to be crucial when moving outdoor for the hydrogen production in a tubular horizontal 50-liter PBR under sunlight radiation. First attempts with laboratory grown cultures showed that no hydrogen production under sulfur starvation can be induced if a previous adaptation of the culture is not pursued outdoor. Indeed, in these conditions the hydrogen production under direct sunlight radiation with C. reinhardtii was finally achieved for the first time in literature (Scoma et al., 2010b submitted). Experiments were also made to optimize productivity in outdoor conditions, with respect to the light dilution within the culture layers. Finally, a brief study of the anaerobic metabolism of C. reinhardtii during hydrogen oxidation has been carried out. This study represents a good integration to the understanding of the complex interplay of pathways that operate concomitantly in this microalga.

Molecular interactions: metal ions and protein chaperones in the urease system from Helicobacter pylori

Although nickel is a toxic metal for living organisms in its soluble form, its importance in many biological processes recently emerged. In this view, the investigation of the nickel-dependent enzymes urease and [NiFe]-hydrogenase, especially the mechanism of nickel insertion into their active sites, represent two intriguing case studies to understand other analogous systems and therefore to lead to a comprehension of the nickel trafficking inside the cell. Moreover, these two enzymes have been demonstrated to ensure survival and colonization of the human pathogen H. pylori, the only known microorganism able to proliferate in the gastric niche. The right nickel delivering into the urease active site requires the presence of at least four accessory proteins, UreD, UreE, UreF and UreG. Similarly, analogous process is principally mediated by HypA and HypB proteins in the [NiFe]-hydrogenase system. Indeed, HpHypA and HpHypB also have been proposed to act in the activation of the urease enzyme from H. pylori, probably mobilizing nickel ions from HpHypA to the HpUreE-HpUreG complex. A complete comprehension of the interaction mechanism between the accessory proteins and the crosstalk between urease and hydrogenase accessory systems requires the determination of the role of each protein chaperone that strictly depends on their structural and biochemical properties. The availability of HpUreE, HpUreG and HpHypA proteins in a pure form is a pre-requisite to perform all the subsequent protein characterizations, thus their purification was the first aim of this work. Subsequently, the structural and biochemical properties of HpUreE were investigated using multi-angle and quasi-elastic light scattering, as well as NMR and circular dichroism spectroscopy. The thermodynamic parameters of Ni2+ and Zn2+ binding to HpUreE were principally established using isothermal titration calorimetry and the importance of key histidine residues in the process of binding metal ions was studied using site-directed mutagenesis. The molecular details of the HpUreE-HpUreG and HpUreE-HpHypA protein-protein assemblies were also elucidated. The interaction between HpUreE and HpUreG was investigated using ITC and NMR spectroscopy, and the influence of Ni2+ and Zn2+ metal ions on the stabilization of this association was established using native gel electrophoresis, light scattering and thermal denaturation scanning followed by CD spectroscopy. Preliminary HpUreE-HpHypA interaction studies were conducted using ITC. Finally, the possible structural architectures of the two protein-protein assemblies were rationalized using homology modeling and docking computational approaches. All the obtained data were interpreted in order to achieve a more exhaustive picture of the urease activation process, and the correlation with the accessory system of the hydrogenase enzyme, considering the specific role and activity of the involved protein players. A possible function for Zn2+ in the chaperone network involved in Ni2+ trafficking and urease activation is also envisaged.

Design and development of new green catalytic methodologies for the synthesis of enantiomerically enriched molecules

The following Ph.D work was mainly focused on catalysis, as a key technology, to achieve the objectives of sustainable (green) chemistry. After introducing the concepts of sustainable (green) chemistry and an assessment of new sustainable chemical technologies, the relationship between catalysis and sustainable (green) chemistry was briefly discussed and illustrated via an analysis of some selected and relevant examples. Afterwards, as a continuation of the ongoing interest in Dr. Marco Bandini’s group on organometallic and organocatalytic processes, I addressed my efforts to the design and development of novel catalytic green methodologies for the synthesis of enantiomerically enriched molecules. In the first two projects the attention was focused on the employment of solid supports to carry out reactions that still remain a prerogative of omogeneous catalysis. Firstly, particular emphasis was addressed to the discovery of catalytic enantioselective variants of nitroaldol condensation (commonly termed Henry reaction), using a complex consisting in a polyethylene supported diamino thiopene (DATx) ligands and copper as active species. In the second project, a new class of electrochemically modified surfaces with DATx palladium complexes was presented. The DATx-graphite system proved to be efficient in promoting the Suzuki reaction. Moreover, in collaboration with Prof. Wolf at the University of British Columbia (Vancouver), cyclic voltammetry studies were reported. This study disclosed new opportunities for carbon–carbon forming processes by using heterogeneous, electrodeposited catalyst films. A straightforward metal-free catalysis allowed the exploration around the world of organocatalysis. In fact, three different and novel methodologies, using Cinchona, Guanidine and Phosphine derivatives, were envisioned in the three following projects. An interesting variant of nitroaldol condensation with simple trifluoromethyl ketones and also their application in a non-conventional activation of indolyl cores by Friedel-Crafts-functionalization, led to two novel synthetic protocols. These approaches allowed the preparation of synthetically useful trifluoromethyl derivatives bearing quaternary stereocenters. Lastly, in the sixth project the first γ-alkylation of allenoates with conjugated carbonyl compounds was envisioned. In the last part of this Ph.D thesis bases on an extra-ordinary collaboration with Prof. Balzani and Prof. Gigli, I was involved in the synthesis and characterization of a new type of heteroleptic cyclometaled-Ir(III) complexes, bearing bis-oxazolines (BOXs) as ancillary ligands. The new heteroleptic complexes were fully characterized and in order to examine the electroluminescent properties of FIrBOX(CH2), an Organic Light Emitting Device was realized.

The Enhanced Single-dish Control System and wide surveys of compact sources

The Italian radio telescopes currently undergo a major upgrade period in response to the growing demand for deep radio observations, such as surveys on large sky areas or observations of vast samples of compact radio sources. The optimised employment of the Italian antennas, at first constructed mainly for VLBI activities and provided with a control system (FS – Field System) not tailored to single-dish observations, required important modifications in particular of the guiding software and data acquisition system. The production of a completely new control system called ESCS (Enhanced Single-dish Control System) for the Medicina dish started in 2007, in synergy with the software development for the forthcoming Sardinia Radio Telescope (SRT). The aim is to produce a system optimised for single-dish observations in continuum, spectrometry and polarimetry. ESCS is also planned to be installed at the Noto site. A substantial part of this thesis work consisted in designing and developing subsystems within ESCS, in order to provide this software with tools to carry out large maps, spanning from the implementation of On-The-Fly fast scans (following both conventional and innovative observing strategies) to the production of single-dish standard output files and the realisation of tools for the quick-look of the acquired data. The test period coincided with the commissioning phase for two devices temporarily installed – while waiting for the SRT to be completed – on the Medicina antenna: a 18-26 GHz 7-feed receiver and the 14-channel analogue backend developed for its use. It is worth stressing that it is the only K-band multi-feed receiver at present available worldwide. The commissioning of the overall hardware/software system constituted a considerable section of the thesis work. Tests were led in order to verify the system stability and its capabilities, down to sensitivity levels which had never been reached in Medicina using the previous observing techniques and hardware devices. The aim was also to assess the scientific potential of the multi-feed receiver for the production of wide maps, exploiting its temporary availability on a mid-sized antenna. Dishes like the 32-m antennas at Medicina and Noto, in fact, offer the best conditions for large-area surveys, especially at high frequencies, as they provide a suited compromise between sufficiently large beam sizes to cover quickly large areas of the sky (typical of small-sized telescopes) and sensitivity (typical of large-sized telescopes). The KNoWS (K-band Northern Wide Survey) project is aimed at the realisation of a full-northern-sky survey at 21 GHz; its pilot observations, performed using the new ESCS tools and a peculiar observing strategy, constituted an ideal test-bed for ESCS itself and for the multi-feed/backend system. The KNoWS group, which I am part of, supported the commissioning activities also providing map-making and source-extraction tools, in order to complete the necessary data reduction pipeline and assess the general system scientific capabilities. The K-band observations, which were carried out in several sessions along the December 2008-March 2010 period, were accompanied by the realisation of a 5 GHz test survey during the summertime, which is not suitable for high-frequency observations. This activity was conceived in order to check the new analogue backend separately from the multi-feed receiver, and to simultaneously produce original scientific data (the 6-cm Medicina Survey, 6MS, a polar cap survey to complete PMN-GB6 and provide an all-sky coverage at 5 GHz).

Development of human visual system analysis for the implementation of a new instrument for flicker measurement

Flicker is a power quality phenomenon that applies to cycle instability of light intensity resulting from supply voltage fluctuation, which, in turn can be caused by disturbances introduced during power generation, transmission or distribution. The standard EN 61000-4-15 which has been recently adopted also by the IEEE as IEEE Standard 1453 relies on the analysis of the supply voltage which is processed according to a suitable model of the lamp – human eye – brain chain. As for the lamp, an incandescent 60 W, 230 V, 50 Hz source is assumed. As far as the human eye – brain model is concerned, it is represented by the so-called flicker curve. Such a curve was determined several years ago by statistically analyzing the results of tests where people were subjected to flicker with different combinations of magnitude and frequency. The limitations of this standard approach to flicker evaluation are essentially two. First, the provided index of annoyance Pst can be related to an actual tiredness of the human visual system only if such an incandescent lamp is used. Moreover, the implemented response to flicker is “subjective” given that it relies on the people answers about their feelings. In the last 15 years, many scientific contributions have tackled these issues by investigating the possibility to develop a novel model of the eye-brain response to flicker and overcome the strict dependence of the standard on the kind of the light source. In this light of fact, this thesis is aimed at presenting an important contribution for a new Flickermeter. An improved visual system model using a physiological parameter that is the mean value of the pupil diameter, has been presented, thus allowing to get a more “objective” representation of the response to flicker. The system used to both generate flicker and measure the pupil diameter has been illustrated along with all the results of several experiments performed on the volunteers. The intent has been to demonstrate that the measurement of that geometrical parameter can give reliable information about the feeling of the human visual system to light flicker.

Organic heterostructure approach for multifunctional light-emitting field-effect transistors

The possibility of combining different functionalities in a single device is of great relevance for further development of organic electronics in integrated components and circuitry. Organic light-emitting transistors (OLETs) have been demonstrated to be able to combine in a single device the electrical switching functionality of a field-effect transistor and the capability of light generation. A novel strategy in OLET realization is the tri-layer vertical hetero-junction. This configuration is similar to the bi-layer except for the presence of a new middle layer between the two transport layers. This “recombination” layer presents high emission quantum efficiency and OLED-like (Organic Light-Emitting Diode) vertical bulk mobility value. The key idea of the vertical tri-layer hetero-junction approach in realizing OLETs is that each layer has to be optimized according to its specific function (charge transport, energy transfer, radiative exciton recombination). Clearly, matching the overall device characteristics with the functional properties of the single materials composing the active region of the OFET, is a great challenge that requires a deep investigation of the morphological, optical and electrical features of the system. As in the case of the bi-layer based OLETs, it is clear that the interfaces between the dielectric and the bottom transport layer and between the recombination and the top transport layer are crucial for guaranteeing good ambipolar field-effect electrical characteristics. Moreover interfaces between the bottom transport and the recombination layer and between the recombination and the top transport layer should provide the favourable conditions for the charge percolation to happen in the recombination layer and form excitons. Organic light emitting transistor based on the tri-layer approach with external quantum efficiency out-performing the OLED state of the art has been recently demonstrated [Capelli et al., Nat. Mater. 9 (2010) 496-503] widening the scientific and technological interest in this field of research.