Dalla città alla casa, dalla casa alla città: la mutevole ricerca di un Piano per il ben-essere urbano

La ricerca si propone di definire le linee guida per la stesura di un Piano che si occupi di qualità della vita e di benessere. Il richiamo alla qualità e al benessere è positivamente innovativo, in quanto impone agli organi decisionali di sintonizzarsi con la soggettività attiva dei cittadini e, contemporaneamente, rende evidente la necessità di un approccio più ampio e trasversale al tema della città e di una più stretta relazione dei tecnici/esperti con i responsabili degli organismi politicoamministrativi. La ricerca vuole indagare i limiti dell’urbanistica moderna di fronte alla complessità di bisogni e di nuove necessità espresse dalle popolazioni urbane contemporanee. La domanda dei servizi è notevolmente cambiata rispetto a quella degli anni Sessanta, oltre che sul piano quantitativo anche e soprattutto sul piano qualitativo, a causa degli intervenuti cambiamenti sociali che hanno trasformato la città moderna non solo dal punto di vista strutturale ma anche dal punto di vista culturale: l’intermittenza della cittadinanza, per cui le città sono sempre più vissute e godute da cittadini del mondo (turisti e/o visitatori, temporaneamente presenti) e da cittadini diffusi (suburbani, provinciali, metropolitani); la radicale trasformazione della struttura familiare, per cui la famiglia-tipo costituita da una coppia con figli, solido riferimento per l’economia e la politica, è oggi minoritaria; l’irregolarità e flessibilità dei calendari, delle agende e dei ritmi di vita della popolazione attiva; la mobilità sociale, per cui gli individui hanno traiettorie di vita e pratiche quotidiane meno determinate dalle loro origini sociali di quanto avveniva nel passato; l’elevazione del livello di istruzione e quindi l’incremento della domanda di cultura; la crescita della popolazione anziana e la forte individualizzazione sociale hanno generato una domanda di città espressa dalla gente estremamente variegata ed eterogenea, frammentata e volatile, e per alcuni aspetti assolutamente nuova. Accanto a vecchie e consolidate richieste – la città efficiente, funzionale, produttiva, accessibile a tutti – sorgono nuove domande, ideali e bisogni che hanno come oggetto la bellezza, la varietà, la fruibilità, la sicurezza, la capacità di stupire e divertire, la sostenibilità, la ricerca di nuove identità, domande che esprimono il desiderio di vivere e di godere la città, di stare bene in città, domande che non possono essere più soddisfatte attraverso un’idea di welfare semplicemente basata sull’istruzione, la sanità, il sistema pensionistico e l’assistenza sociale. La città moderna ovvero l’idea moderna della città, organizzata solo sui concetti di ordine, regolarità, pulizia, uguaglianza e buon governo, è stata consegnata alla storia passata trasformandosi ora in qualcosa di assai diverso che facciamo fatica a rappresentare, a descrivere, a raccontare. La città contemporanea può essere rappresentata in molteplici modi, sia dal punto di vista urbanistico che dal punto di vista sociale: nella letteratura recente è evidente la difficoltà di definire e di racchiudere entro limiti certi l’oggetto “città” e la mancanza di un convincimento forte nell’interpretazione delle trasformazioni politiche, economiche e sociali che hanno investito la società e il mondo nel secolo scorso. La città contemporanea, al di là degli ambiti amministrativi, delle espansioni territoriali e degli assetti urbanistici, delle infrastrutture, della tecnologia, del funzionalismo e dei mercati globali, è anche luogo delle relazioni umane, rappresentazione dei rapporti tra gli individui e dello spazio urbano in cui queste relazioni si muovono. La città è sia concentrazione fisica di persone e di edifici, ma anche varietà di usi e di gruppi, densità di rapporti sociali; è il luogo in cui avvengono i processi di coesione o di esclusione sociale, luogo delle norme culturali che regolano i comportamenti, dell’identità che si esprime materialmente e simbolicamente nello spazio pubblico della vita cittadina. Per studiare la città contemporanea è necessario utilizzare un approccio nuovo, fatto di contaminazioni e saperi trasversali forniti da altre discipline, come la sociologia e le scienze umane, che pure contribuiscono a costruire l’immagine comunemente percepita della città e del territorio, del paesaggio e dell’ambiente. La rappresentazione del sociale urbano varia in base all’idea di cosa è, in un dato momento storico e in un dato contesto, una situazione di benessere delle persone. L’urbanistica moderna mirava al massimo benessere del singolo e della collettività e a modellarsi sulle “effettive necessità delle persone”: nei vecchi manuali di urbanistica compare come appendice al piano regolatore il “Piano dei servizi”, che comprende i servizi distribuiti sul territorio circostante, una sorta di “piano regolatore sociale”, per evitare quartieri separati per fasce di popolazione o per classi. Nella città contemporanea la globalizzazione, le nuove forme di marginalizzazione e di esclusione, l’avvento della cosiddetta “new economy”, la ridefinizione della base produttiva e del mercato del lavoro urbani sono espressione di una complessità sociale che può essere definita sulla base delle transazioni e gli scambi simbolici piuttosto che sui processi di industrializzazione e di modernizzazione verso cui era orientata la città storica, definita moderna. Tutto ciò costituisce quel complesso di questioni che attualmente viene definito “nuovo welfare”, in contrapposizione a quello essenzialmente basato sull’istruzione, sulla sanità, sul sistema pensionistico e sull’assistenza sociale. La ricerca ha quindi analizzato gli strumenti tradizionali della pianificazione e programmazione territoriale, nella loro dimensione operativa e istituzionale: la destinazione principale di tali strumenti consiste nella classificazione e nella sistemazione dei servizi e dei contenitori urbanistici. E’ chiaro, tuttavia, che per poter rispondere alla molteplice complessità di domande, bisogni e desideri espressi dalla società contemporanea le dotazioni effettive per “fare città” devono necessariamente superare i concetti di “standard” e di “zonizzazione”, che risultano essere troppo rigidi e quindi incapaci di adattarsi all’evoluzione di una domanda crescente di qualità e di servizi e allo stesso tempo inadeguati nella gestione del rapporto tra lo spazio domestico e lo spazio collettivo. In questo senso è rilevante il rapporto tra le tipologie abitative e la morfologia urbana e quindi anche l’ambiente intorno alla casa, che stabilisce il rapporto “dalla casa alla città”, perché è in questa dualità che si definisce il rapporto tra spazi privati e spazi pubblici e si contestualizzano i temi della strada, dei negozi, dei luoghi di incontro, degli accessi. Dopo la convergenza dalla scala urbana alla scala edilizia si passa quindi dalla scala edilizia a quella urbana, dal momento che il criterio del benessere attraversa le diverse scale dello spazio abitabile. Non solo, nei sistemi territoriali in cui si è raggiunto un benessere diffuso ed un alto livello di sviluppo economico è emersa la consapevolezza che il concetto stesso di benessere sia non più legato esclusivamente alla capacità di reddito collettiva e/o individuale: oggi la qualità della vita si misura in termini di qualità ambientale e sociale. Ecco dunque la necessità di uno strumento di conoscenza della città contemporanea, da allegare al Piano, in cui vengano definiti i criteri da osservare nella progettazione dello spazio urbano al fine di determinare la qualità e il benessere dell’ambiente costruito, inteso come benessere generalizzato, nel suo significato di “qualità dello star bene”. E’ evidente che per raggiungere tale livello di qualità e benessere è necessario provvedere al soddisfacimento da una parte degli aspetti macroscopici del funzionamento sociale e del tenore di vita attraverso gli indicatori di reddito, occupazione, povertà, criminalità, abitazione, istruzione, etc.; dall’altra dei bisogni primari, elementari e di base, e di quelli secondari, culturali e quindi mutevoli, trapassando dal welfare state allo star bene o well being personale, alla wellness in senso olistico, tutte espressioni di un desiderio di bellezza mentale e fisica e di un nuovo rapporto del corpo con l’ambiente, quindi manifestazione concreta di un’esigenza di ben-essere individuale e collettivo. Ed è questa esigenza, nuova e difficile, che crea la diffusa sensazione dell’inizio di una nuova stagione urbana, molto più di quanto facciano pensare le stesse modifiche fisiche della città.

Rafael Moneo: la complessità del vuoto. Dalle matrici formali dell'opera di Oteiza e Chillida

The experience of void, essential to the production of forms and to make use them, can be considered as the base of the activities that attend to the formative processes. If void and matter constitutes the basic substances of architecture. Their role in the definition of form, the symbolic value and the constructive methods of it defines the quality of the space. This job inquires the character of space in the architecture of Moneo interpreting the meaning of the void in the Basque culture through the reading of the form matrices in the work of Jorge Oteiza and Eduardo Chillida. In the tie with the Basque culture a reading key is characterized by concurring to put in relation some of the theoretical principles expressed by Moneo on the relationship between place and time, in an unique and specific vision of the space. In the analysis of the process that determines the genesis of the architecture of Moneo emerges a trajectory whose direction is constructed on two pivos: on the one hand architecture like instrument of appropriation of the place, gushed from an acquaintance process who leans itself to the reading of the relations that define the place and of the resonances through which measuring it, on the other hand the architecture whose character is able to represent and to extend the time in which he is conceived, through the autonomy that is conferred to them from values. Following the trace characterized from this hypothesis, that is supported on the theories elaborated from Moneo, surveying deepens the reading of the principles that construct the sculptural work of Oteiza and Chillida, features from a search around the topic of the void and to its expression through the form. It is instrumental to the definition of a specific area that concurs to interpret the character of the space subtended to a vision of the place and the time, affine to the sensibility of Moneo and in some way not stranger to its cultural formation. The years of the academic formation, during which Moneo enters in contact with the Basque artistic culture, seem to be an important period in the birth of that knowledge that will leads him to the formulation of theories tied to the relationship between time, place and architecture. The values expressed through the experimental work of Oteiza and Chillida during years '50 are valid bases to the understanding of such relationships. In tracing a profile of the figures of Oteiza and Chillida, without the pretension that it is exhaustive for the reading of the complex historical period in which they are placed, but with the needs to put the work in a context, I want to be evidenced the important role carried out from the two artists from the Basque cultural area within which Moneo moves its first steps. The tie that approaches Moneo to the Basque culture following the personal trajectory of the formative experience interlaces to that one of important figures of the art and the Spanish architecture. One of the more meaningful relationships is born just during the years of his academic formation, from 1958 to the 1961, when he works like student in the professional office of the architect Francisco Sáenz de Oiza, who was teaching architectural design at the ETSAM. In these years many figures of Basque artists alternated at the professional office of Oiza that enjoys the important support of the manufacturer and maecenas Juan Huarte Beaumont, introduced to he from Oteiza. The tie between Huarte and Oteiza is solid and continuous in the years and it realizes in a contribution to many of the initiatives that makes of Oteiza a forwarder of the Basque culture. In the four years of collaboration with Oiza, Moneo has the opportunity to keep in contact with an atmosphere permeated by a constant search in the field of the plastic art and with figures directly connected to such atmosphere. It’s of a period of great intensity as in the production like in the promotion of the Basque art. The collective “Blanco y Negro”, than is held in 1959 at the Galería Darro to Madrid, is only one of the many times of an exhibition of the work of Oteiza and Chillida. The end of the Fifties is a period of international acknowledgment for Chillida that for Oteiza. The decade of the Fifties consecrates the hypotheses of a mythical past of the Basque people through the spread of the studies carried out in the antecedent years. The archaeological discoveries that join to a context already rich of signs of the prehistoric era, consolidate the knowledge of a strong cultural identity. Oteiza, like Chillida and other contemporary artists, believe in a cosmogonist conception belonging to the Basques, connected to their matriarchal mythological past. The void in its meaning of absence, in the Basque culture, thus as in various archaic and oriental religions, is equivalent to the spiritual fullness as essential condition to the revealing of essence. Retracing the archaic origins of the Basque culture emerges the deep meaning that the void assumes as key element in the religious interpretation of the passage from the life to the death. The symbology becomes rich of meaningful characters who derive from the fact that it is a chthonic cult. A representation of earth like place in which divine manifest itself but also like connection between divine and human, and this manipulation of the matter of which the earth it is composed is the tangible projection of the continuous search of the man towards God. The search of equilibrium between empty and full, that characterizes also the development of the form in architecture, in the Basque culture assumes therefore a peculiar value that returns like constant in great part of the plastic expressions, than in this context seem to be privileged regarding the other expressive forms. Oteiza and Chillida develop two original points of view in the representation of the void through the form. Both use of rigorous systems of rules sensitive to the physics principles and the characters of the matter. The last aim of the Oteiza’s construction is the void like limit of the knowledge, like border between known and unknown. It doesn’t means to reduce the sculptural object to an only allusive dimension because the void as physical and spiritual power is an active void, that possesses that value able to reveal the being through the trace of un-being. The void in its transcendental manifestation acts at the same time from universal and from particular, like in the atomic structure of the matter, in which on one side it constitutes the inner structure of every atom and on the other one it is necessary condition to the interaction between all the atoms. The void can be seen therefore as the action field that concurs the relations between the forms but is also the necessary condition to the same existence of the form. In the construction of Chillida the void represents that counterpart structuring the matter, inborn in it, the element in absence of which wouldn’t be variations neither distinctive characters to define the phenomenal variety of the world. The physics laws become the subject of the sculptural representation, the void are the instrument that concurs to catch up the equilibrium. Chillida dedicate himself to experience the space through the senses, to perceive of the qualities, to tell the physics laws which forge the matter in the form and the form arranges the places. From the artistic experience of the two sculptors they can be transposed, to the architectonic work of Moneo, those matrices on which they have constructed their original lyric expressions, where the void is absolute protagonist. An ambit is defined thus within which the matrices form them drafts from the work of Oteiza and Chillida can be traced in the definition of the process of birth and construction of the architecture of Moneo, but also in the relation that the architecture establishes with the place and in the time. The void becomes instrument to read the space constructed in its relationships that determine the proportions, rhythms, and relations. In this way the void concurs to interpret the architectonic space and to read the value of it, the quality of the spaces constructing it. This because it’s like an instrument of the composition, whose role is to maintain to the separation between the elements putting in evidence the field of relations. The void is that instrument that serves to characterize the elements that are with in the composition, related between each other, but distinguished. The meaning of the void therefore pushes the interpretation of the architectonic composition on the game of the relations between the elements that, independent and distinguished, strengthen themselves in their identity. On the one hand if void, as measurable reality, concurs all the dimensional changes quantifying the relationships between the parts, on the other hand its dialectic connotation concurs to search the equilibrium that regulated such variations. Equilibrium that therefore does not represent an obtained state applying criteria setting up from arbitrary rules but that depends from the intimate nature of the matter and its embodiment in the form. The production of a form, or a formal system that can be finalized to the construction of a building, is indissolubly tied to the technique that is based on the acquaintance of the formal vocation of the matter, and what it also can representing, meaning, expresses itself in characterizing the site. For Moneo, in fact, the space defined from the architecture is above all a site, because the essence of the site is based on the construction. When Moneo speaks about “birth of the idea of plan” like essential moment in the construction process of the architecture, it refers to a process whose complexity cannot be born other than from a deepened acquaintance of the site that leads to the comprehension of its specificity. Specificity arise from the infinite sum of relations, than for Moneo is the story of the oneness of a site, of its history, of the cultural identity and of the dimensional characters that that they are tied to it beyond that to the physical characteristics of the site. This vision is leaned to a solid made physical structure of perceptions, of distances, guideline and references that then make that the process is first of all acquaintance, appropriation. Appropriation that however does not happen for directed consequence because does not exist a relationship of cause and effect between place and architecture, thus as an univocal and exclusive way does not exist to arrive to a representation of an idea. An approach that, through the construction of the place where the architecture acquires its being, searches an expression of its sense of the truth. The proposal of a distinction for areas like space, matter, spirit and time, answering to the issues that scan the topics of the planning search of Moneo, concurs a more immediate reading of the systems subtended to the composition principles, through which is related the recurrent architectonic elements in its planning dictionary. From the dialectic between the opposites that is expressed in the duality of the form, through the definition of a complex element that can mediate between inside and outside as a real system of exchange, Moneo experiences the form development of the building deepening the relations that the volume establishes in the site. From time to time the invention of a system used to answer to the needs of the program and to resolve the dual character of the construction in an only gesture, involves a deep acquaintance of the professional practice. The technical aspect is the essential support to which the construction of the system is indissolubly tied. What therefore arouses interest is the search of the criteria and the way to construct that can reveal essential aspects of the being of the things. The constructive process demands, in fact, the acquaintance of the formative properties of the matter. Property from which the reflections gush on the relations that can be born around the architecture through the resonance produced from the forms. The void, in fact, through the form is in a position to constructing the site establishing a reciprocity relation. A reciprocity that is determined in the game between empty and full and of the forms between each other, regarding around, but also with regard to the subjective experience. The construction of a background used to amplify what is arranged on it and to clearly show the relations between the parts and at the same time able to tie itself with around opening the space of the vision, is a system that in the architecture of Moneo has one of its more effective applications in the use of the platform used like architectonic element. The spiritual force of this architectonic gesture is in the ability to define a place whose projecting intention is perceived and shared with who experience and has lived like some instrument to contact the cosmic forces, in a delicate process that lead to the equilibrium with them, but in completely physical way. The principles subtended to the construction of the form taken from the study of the void and the relations that it concurs, lead to express human values in the construction of the site. The validity of these principles however is tested from the time. The time is what Moneo considers as filter that every architecture is subordinate to and the survival of architecture, or any of its formal characters, reveals them the validity of the principles that have determined it. It manifests thus, in the tie between the spatial and spiritual dimension, between the material and the worldly dimension, the state of necessity that leads, in the construction of the architecture, to establish a contact with the forces of the universe and the intimate world, through a process that translate that necessity in elaboration of a formal system.

Application-oriented Mixed Integer Non-Linear Programming

In the most recent years there is a renovate interest for Mixed Integer Non-Linear Programming (MINLP) problems. This can be explained for different reasons: (i) the performance of solvers handling non-linear constraints was largely improved; (ii) the awareness that most of the applications from the real-world can be modeled as an MINLP problem; (iii) the challenging nature of this very general class of problems. It is well-known that MINLP problems are NP-hard because they are the generalization of MILP problems, which are NP-hard themselves. However, MINLPs are, in general, also hard to solve in practice. We address to non-convex MINLPs, i.e. having non-convex continuous relaxations: the presence of non-convexities in the model makes these problems usually even harder to solve. The aim of this Ph.D. thesis is to give a flavor of different possible approaches that one can study to attack MINLP problems with non-convexities, with a special attention to real-world problems. In Part 1 of the thesis we introduce the problem and present three special cases of general MINLPs and the most common methods used to solve them. These techniques play a fundamental role in the resolution of general MINLP problems. Then we describe algorithms addressing general MINLPs. Parts 2 and 3 contain the main contributions of the Ph.D. thesis. In particular, in Part 2 four different methods aimed at solving different classes of MINLP problems are presented. Part 3 of the thesis is devoted to real-world applications: two different problems and approaches to MINLPs are presented, namely Scheduling and Unit Commitment for Hydro-Plants and Water Network Design problems. The results show that each of these different methods has advantages and disadvantages. Thus, typically the method to be adopted to solve a real-world problem should be tailored on the characteristics, structure and size of the problem. Part 4 of the thesis consists of a brief review on tools commonly used for general MINLP problems, constituted an integral part of the development of this Ph.D. thesis (especially the use and development of open-source software). We present the main characteristics of solvers for each special case of MINLP.

Sviluppo, implementazione e valutazione funzionale di un nuovo modello protesico di caviglia

Total ankle arthroplasty (TAA) is still not as satisfactory as total hip and total knee arthroplasty. For the TAA to be considered a valuable alternative to ankle arthrodesis, an effective range of ankle mobility must be recovered. The disappointing clinical results of the current generation of TAA are mostly related to poor understanding of the structures guiding ankle joint mobility. A new design (BOX Ankle) has been developed, uniquely able to restore physiologic ankle mobility and a natural relationship between the implanted components and the retained ligaments. For the first time the shapes of the tibial and talar components in the sagittal plane were designed to be compatible with the demonstrated ligament isometric rotation. This resulted in an unique motion at the replaced ankle where natural sliding as well as rolling motion occurs while at the same time full conformity is maintained between the three components throughout the flexion arc. According to prior research, the design features a spherical convex tibial component, a talar component with radius of curvature in the sagittal plane longer than that of the natural talus, and a fully conforming meniscal component. After computer-based modelling and preliminary observations in several trial implantation in specimens, 126 patients were implanted in the period July 2003 – December 2008. 75 patients with at least 6 months follow-up are here reported. Mean age was 62,6 years (range 22 – 80), mean follow-up 20,2 months. The AOFAS clinical score systems were used to assess patient outcome. Radiographs at maximal dorsiflexion and maximal plantar flexion confirmed the meniscalbearing component moves anteriorly during dorsiflexion and posteriorly during plantarflexion. Frontal and lateral radiographs in the patients, show good alignment of the components, and no signs of radiolucency or loosening. The mean AOFAS score was observed to go from 41 pre-op to 74,6 at 6 month follow-up, with further improvement at the following follow-up. These early results reveal satisfactory clinical scores, with good recovery of range of motion and reduction of pain. Radiographic assessment reveals good osteointegration. All these preliminary results confirm biomechanical studies and the validity of this novel ligamentcompatible prosthesis design. Surely it will be important to re-evaluate these patients later.

Aspects of Integrability in Gauge/String Correspondence

In this thesis, we present our work about some generalisations of ideas, techniques and physical interpretations typical for integrable models to one of the most outstanding advances in theoretical physics of nowadays: the AdS/CFT correspondences. We have undertaken the problem of testing this conjectured duality under various points of view, but with a clear starting point - the integrability - and with a clear ambitious task in mind: to study the finite-size effects in the energy spectrum of certain string solutions on a side and in the anomalous dimensions of the gauge theory on the other. Of course, the final desire woul be the exact comparison between these two faces of the gauge/string duality. In few words, the original part of this work consists in application of well known integrability technologies, in large parte borrowed by the study of relativistic (1+1)-dimensional integrable quantum field theories, to the highly non-relativisic and much complicated case of the thoeries involved in the recent conjectures of AdS5/CFT4 and AdS4/CFT3 corrspondences. In details, exploiting the spin chain nature of the dilatation operator of N = 4 Super-Yang-Mills theory, we concentrated our attention on one of the most important sector, namely the SL(2) sector - which is also very intersting for the QCD understanding - by formulating a new type of nonlinear integral equation (NLIE) based on a previously guessed asymptotic Bethe Ansatz. The solutions of this Bethe Ansatz are characterised by the length L of the correspondent spin chain and by the number s of its excitations. A NLIE allows one, at least in principle, to make analytical and numerical calculations for arbitrary values of these parameters. The results have been rather exciting. In the important regime of high Lorentz spin, the NLIE clarifies how it reduces to a linear integral equations which governs the subleading order in s, o(s0). This also holds in the regime with L ! 1, L/ ln s finite (long operators case). This region of parameters has been particularly investigated in literature especially because of an intriguing limit into the O(6) sigma model defined on the string side. One of the most powerful methods to keep under control the finite-size spectrum of an integrable relativistic theory is the so called thermodynamic Bethe Ansatz (TBA). We proposed a highly non-trivial generalisation of this technique to the non-relativistic case of AdS5/CFT4 and made the first steps in order to determine its full spectrum - of energies for the AdS side, of anomalous dimensions for the CFT one - at any values of the coupling constant and of the size. At the leading order in the size parameter, the calculation of the finite-size corrections is much simpler and does not necessitate the TBA. It consists in deriving for a nonrelativistc case a method, invented for the first time by L¨uscher to compute the finite-size effects on the mass spectrum of relativisic theories. So, we have formulated a new version of this approach to adapt it to the case of recently found classical string solutions on AdS4 × CP3, inside the new conjecture of an AdS4/CFT3 correspondence. Our results in part confirm the string and algebraic curve calculations, in part are completely new and then could be better understood by the rapidly evolving developments of this extremely exciting research field.

Modellazione multibody di veicoli ferroviari: sviluppo ed implementazione di modelli innovativi per l'analisi del contatto ruota - rotaia

The wheel - rail contact analysis plays a fundamental role in the multibody modeling of railway vehicles. A good contact model must provide an accurate description of the global contact phenomena (contact forces and torques, number and position of the contact points) and of the local contact phenomena (position and shape of the contact patch, stresses and displacements). The model has also to assure high numerical efficiency (in order to be implemented directly online within multibody models) and a good compatibility with commercial multibody software (Simpack Rail, Adams Rail). The wheel - rail contact problem has been discussed by several authors and many models can be found in the literature. The contact models can be subdivided into two different categories: the global models and the local (or differential) models. Currently, as regards the global models, the main approaches to the problem are the so - called rigid contact formulation and the semi – elastic contact description. The rigid approach considers the wheel and the rail as rigid bodies. The contact is imposed by means of constraint equations and the contact points are detected during the dynamic simulation by solving the nonlinear algebraic differential equations associated to the constrained multibody system. Indentation between the bodies is not permitted and the normal contact forces are calculated through the Lagrange multipliers. Finally the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces respectively. Also the semi - elastic approach considers the wheel and the rail as rigid bodies. However in this case no kinematic constraints are imposed and the indentation between the bodies is permitted. The contact points are detected by means of approximated procedures (based on look - up tables and simplifying hypotheses on the problem geometry). The normal contact forces are calculated as a function of the indentation while, as in the rigid approach, the Hertz’s and the Kalker’s theories allow to evaluate the shape of the contact patch and the tangential forces. Both the described multibody approaches are computationally very efficient but their generality and accuracy turn out to be often insufficient because the physical hypotheses behind these theories are too restrictive and, in many circumstances, unverified. In order to obtain a complete description of the contact phenomena, local (or differential) contact models are needed. In other words wheel and rail have to be considered elastic bodies governed by the Navier’s equations and the contact has to be described by suitable analytical contact conditions. The contact between elastic bodies has been widely studied in literature both in the general case and in the rolling case. Many procedures based on variational inequalities, FEM techniques and convex optimization have been developed. This kind of approach assures high generality and accuracy but still needs very large computational costs and memory consumption. Due to the high computational load and memory consumption, referring to the current state of the art, the integration between multibody and differential modeling is almost absent in literature especially in the railway field. However this integration is very important because only the differential modeling allows an accurate analysis of the contact problem (in terms of contact forces and torques, position and shape of the contact patch, stresses and displacements) while the multibody modeling is the standard in the study of the railway dynamics. In this thesis some innovative wheel – rail contact models developed during the Ph. D. activity will be described. Concerning the global models, two new models belonging to the semi – elastic approach will be presented; the models satisfy the following specifics: 1) the models have to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the models have to consider generic railway tracks and generic wheel and rail profiles 3) the models have to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the models have to evaluate the number and the position of the contact points and, for each point, the contact forces and torques 4) the models have to be implementable directly online within the multibody models without look - up tables 5) the models have to assure computation times comparable with those of commercial multibody software (Simpack Rail, Adams Rail) and compatible with RT and HIL applications 6) the models have to be compatible with commercial multibody software (Simpack Rail, Adams Rail). The most innovative aspect of the new global contact models regards the detection of the contact points. In particular both the models aim to reduce the algebraic problem dimension by means of suitable analytical techniques. This kind of reduction allows to obtain an high numerical efficiency that makes possible the online implementation of the new procedure and the achievement of performance comparable with those of commercial multibody software. At the same time the analytical approach assures high accuracy and generality. Concerning the local (or differential) contact models, one new model satisfying the following specifics will be presented: 1) the model has to be 3D and to consider all the six relative degrees of freedom between wheel and rail 2) the model has to consider generic railway tracks and generic wheel and rail profiles 3) the model has to assure a general and accurate handling of the multiple contact without simplifying hypotheses on the problem geometry; in particular the model has to able to calculate both the global contact variables (contact forces and torques) and the local contact variables (position and shape of the contact patch, stresses and displacements) 4) the model has to be implementable directly online within the multibody models 5) the model has to assure high numerical efficiency and a reduced memory consumption in order to achieve a good integration between multibody and differential modeling (the base for the local contact models) 6) the model has to be compatible with commercial multibody software (Simpack Rail, Adams Rail). In this case the most innovative aspects of the new local contact model regard the contact modeling (by means of suitable analytical conditions) and the implementation of the numerical algorithms needed to solve the discrete problem arising from the discretization of the original continuum problem. Moreover, during the development of the local model, the achievement of a good compromise between accuracy and efficiency turned out to be very important to obtain a good integration between multibody and differential modeling. At this point the contact models has been inserted within a 3D multibody model of a railway vehicle to obtain a complete model of the wagon. The railway vehicle chosen as benchmark is the Manchester Wagon the physical and geometrical characteristics of which are easily available in the literature. The model of the whole railway vehicle (multibody model and contact model) has been implemented in the Matlab/Simulink environment. The multibody model has been implemented in SimMechanics, a Matlab toolbox specifically designed for multibody dynamics, while, as regards the contact models, the CS – functions have been used; this particular Matlab architecture allows to efficiently connect the Matlab/Simulink and the C/C++ environment. The 3D multibody model of the same vehicle (this time equipped with a standard contact model based on the semi - elastic approach) has been then implemented also in Simpack Rail, a commercial multibody software for railway vehicles widely tested and validated. Finally numerical simulations of the vehicle dynamics have been carried out on many different railway tracks with the aim of evaluating the performances of the whole model. The comparison between the results obtained by the Matlab/ Simulink model and those obtained by the Simpack Rail model has allowed an accurate and reliable validation of the new contact models. In conclusion to this brief introduction to my Ph. D. thesis, we would like to thank Trenitalia and the Regione Toscana for the support provided during all the Ph. D. activity. Moreover we would also like to thank the INTEC GmbH, the society the develops the software Simpack Rail, with which we are currently working together to develop innovative toolboxes specifically designed for the wheel rail contact analysis.

Complex higher spins, Weyl invariance and tractors

In this thesis work I analyze higher spin field theories from a first quantized perspective, finding in particular new equations describing complex higher spin fields on Kaehler manifolds. They are studied by means of worldline path integrals and canonical quantization, in the framework of supersymmetric spinning particle theories, in order to investigate their quantum properties both in flat and curved backgrounds. For instance, by quantizing a spinning particle with one complex extended supersymmetry, I describe quantum massless (p,0)-forms and find a worldline representation for their effective action on a Kaehler background, as well as exact duality relations. Interesting results are found also in the definition of the functional integral for the so called O(N) spinning particles, that will allow to study real higher spins on curved spaces. In the second part, I study Weyl invariant field theories by using a particular mathematical framework known as tractor calculus, that enable to maintain at each step manifest Weyl covariance.

Decomposition and reformulation of integer linear programming problems

This thesis deals with an investigation of Decomposition and Reformulation to solve Integer Linear Programming Problems. This method is often a very successful approach computationally, producing high-quality solutions for well-structured combinatorial optimization problems like vehicle routing, cutting stock, p-median and generalized assignment . However, until now the method has always been tailored to the specific problem under investigation. The principal innovation of this thesis is to develop a new framework able to apply this concept to a generic MIP problem. The new approach is thus capable of auto-decomposition and autoreformulation of the input problem applicable as a resolving black box algorithm and works as a complement and alternative to the normal resolving techniques. The idea of Decomposing and Reformulating (usually called in literature Dantzig and Wolfe Decomposition DWD) is, given a MIP, to convexify one (or more) subset(s) of constraints (slaves) and working on the partially convexified polyhedron(s) obtained. For a given MIP several decompositions can be defined depending from what sets of constraints we want to convexify. In this thesis we mainly reformulate MIPs using two sets of variables: the original variables and the extended variables (representing the exponential extreme points). The master constraints consist of the original constraints not included in any slaves plus the convexity constraint(s) and the linking constraints(ensuring that each original variable can be viewed as linear combination of extreme points of the slaves). The solution procedure consists of iteratively solving the reformulated MIP (master) and checking (pricing) if a variable of reduced costs exists, and in which case adding it to the master and solving it again (columns generation), or otherwise stopping the procedure. The advantage of using DWD is that the reformulated relaxation gives bounds stronger than the original LP relaxation, in addition it can be incorporated in a Branch and bound scheme (Branch and Price) in order to solve the problem to optimality. If the computational time for the pricing problem is reasonable this leads in practice to a stronger speed up in the solution time, specially when the convex hull of the slaves is easy to compute, usually because of its special structure.

Geometric and Combinatorial Aspects of NonEquilibrium Statistical Mechanics

Non-Equilibrium Statistical Mechanics is a broad subject. Grossly speaking, it deals with systems which have not yet relaxed to an equilibrium state, or else with systems which are in a steady non-equilibrium state, or with more general situations. They are characterized by external forcing and internal fluxes, resulting in a net production of entropy which quantifies dissipation and the extent by which, by the Second Law of Thermodynamics, time-reversal invariance is broken. In this thesis we discuss some of the mathematical structures involved with generic discrete-state-space non-equilibrium systems, that we depict with networks in all analogous to electrical networks. We define suitable observables and derive their linear regime relationships, we discuss a duality between external and internal observables that reverses the role of the system and of the environment, we show that network observables serve as constraints for a derivation of the minimum entropy production principle. We dwell on deep combinatorial aspects regarding linear response determinants, which are related to spanning tree polynomials in graph theory, and we give a geometrical interpretation of observables in terms of Wilson loops of a connection and gauge degrees of freedom. We specialize the formalism to continuous-time Markov chains, we give a physical interpretation for observables in terms of locally detailed balanced rates, we prove many variants of the fluctuation theorem, and show that a well-known expression for the entropy production due to Schnakenberg descends from considerations of gauge invariance, where the gauge symmetry is related to the freedom in the choice of a prior probability distribution. As an additional topic of geometrical flavor related to continuous-time Markov chains, we discuss the Fisher-Rao geometry of nonequilibrium decay modes, showing that the Fisher matrix contains information about many aspects of non-equilibrium behavior, including non-equilibrium phase transitions and superposition of modes. We establish a sort of statistical equivalence principle and discuss the behavior of the Fisher matrix under time-reversal. To conclude, we propose that geometry and combinatorics might greatly increase our understanding of nonequilibrium phenomena.

Three Essays in Spatial Economics

This work contributes to the field of spatial economics by embracing three distinct modelling approaches, belonging to different strands of the theoretical literature. In the first chapter I present a theoretical model in which the changes in urban system’s degree of functional specialisation are linked to (i) firms’ organisational choices and firms’ location decisions. The interplay between firms’ internal communication/managing costs (between headquarters and production plants) and the cost of communicating with distant business services providers leads the transition process from an “integrated” urban system where each city hosts every different functions to a “functionally specialised” urban system where each city is either a primary business center (hosting advanced business services providers, a secondary business center or a pure manufacturing city and all this city-types coexist in equilibrium.The second chapter investigates the impact of free trade on welfare in a two-country world modelled as an international Hotelling duopoly with quadratic transport costs and asymmetric countries, where a negative environmental externality is associated with the consumption of the good produced in the smaller country. Countries’ relative sizes as well as the intensity of negative environmental externality affect potential welfare gains of trade liberalisation. The third chapter focuses on the paradox, by which, contrary to theoretical predictions, empirical evidence shows that a decrease in international transport costs causes an increase in foreign direct investments (FDIs). Here we propose an explanation to this apparent puzzle by exploiting an approach which delivers a continuum of Bertrand- Nash equilibria ranging above marginal cost pricing. In our setting, two Bertrand firms, supplying a homogeneous good with a convex cost function, enter the market of a foreign country. We show that allowing for a softer price competition may indeed more than offset the standard effect generated by a decrease in trade costs, thereby restoring FDI incentives.

Studies on the dual in Mycenaean, in the Homeric poetry and in the Attic Theatre of the 5th century — morphological, dialectal and stylistical variations

The present dissertation focuses on the dual number in Ancient Greek in a diachronical lapse stretching from the Mycenaean age to the Attic Drama and Comedy of the 5th century BC. In the first chapter morphological issues are addressed, chiefly in a comparative perspective. The Indo European evidence on the dual is hence gathered in order to sketch patterns of grammaticalisation and paradigmatisation of specific grams, growing increasingly functional within the Greek domain. In the second chapter syntactical problems are tackled. After a survey of scholarly literature on the Greek dual, we engage in a functional and typological approach, in order to disentangle some biased assessments on the dual, namely its alleged lack of regularity and intermittent agreement. Some recent frameworks in General Linguistics provide useful grounds for casting new light on the subject. Internal Reconstruction, for instance, supports the facultativity of the dual in each and every stage of its development; Typology and the Animacy Hierarcy add precious cross linguistical insight on the behaviour of the dual toward agreement. Glaring differences also arise as to the adoption — or avoidance — of the dual by different authors. Idiolectal varieties prove in fact conditioned by stylistical and register necessity. By means of a comparison among Epics, Tragedy and Comedy it is possible to enhance differences in the evaluation of the dual, which led sometimes to forms of ‘censure’ — thus triggering the onset of competing strategies to express duality. The last two chapters delve into the tantalising variety of the Homeric evidence, first of all in an account of the notorious issue of the Embassy of Iliad IX, and last in a commentary of all significant Homeric duals — mostly represented by archaisms, formulae, and ad hoc coinages.

On the GKP Vacuum in Gauge/Gravity Correspondences

Within the framework of the AdS5/CFT4 correspondence, the GKP string living on a AdS5 x S5 background finds a counterpart in the anti-ferromagnetic vacuum state for the spin chain, fruitfully employed to investigate the dual N=4 SYM superconformal gauge theory. The thesis mainly deals with the excitations over such a vacuum: dispersion relations and scattering matrices are computed, moreover a set of Asymptotic Bethe Ansatz equations is formulated. Furthermore, the survey of the GKP vacuum within the AdS4/CFT3 duality between a string theory on AdS4 x CP 3 and N=6 Chern-Simons reveals intriguing connections relating the latter to N=4 SYM, in a peculiar high spin limit.

Mechanical behavior of flat and curved laminates interleaved by electrospun nanofibers

A major weakness of composite materials is that low-velocity impact, introduced accidentally during manufacture, operation or maintenance of the aircraft, may result in delaminations between the plies. Therefore, the first part of this study is focused on mechanics of curved laminates under impact. For this aim, the effect of preloading on impact response of curved composite laminates is considered. By applying the preload, the stress through the thickness and curvature of the laminates increased. The results showed that all impact parameters are varied significantly. For understanding the contribution rate of preloading and pre-stress on the obtained results another test is designed. The interesting phenomenon is that the preloading can decrease the damaged area when the curvature of the both specimens is the same. Finally the effect of curvature type, concave and convex, is investigated under impact loading. In the second part, a new composition of nanofibrous mats are developed to improve the efficiency of curved laminates under impact loading. Therefore, at first some fracture tests are conducted to consider the effect of Nylon 6,6, PCL, and their mixture on mode I and mode II fracture toughness. For this goal, nanofibers are electrospun and interleaved between mid-plane of laminate composite to conduct mode I and mode II tests. The results shows that efficiency of Nylon 6,6 is better than PCL in mode II, while the effect of PCL on fracture toughness of mode I is more. By mixing these nanofibers the shortage of the individual nanofibers is compensated and so the Nylon 6,6/PCL nanofibers could increased mode I and II fracture toughness. Then all these nanofibers are used between all layers of composite layers to investigate their effect on damaged area. The results showed that PCL could decrease the damaged area about 25% and Nylon 6,6 and mixed nanofibers about 50%.

La registrazione immobiliare nell'ordinamento cinese e nelle esperienze giuridiche europee: modelli per una nuova riforma in Cina

L’ordinamento giuridico cinese contemporaneo si è, recentemente, impegnato in una riforma che ha interessato le norme vigenti in materia di registrazione immobiliare con l’intento di realizzare un sistema unitario dell’istituto. Dal momento che la modernizzazione del diritto civile cinese è iniziata - a partire dalla fine del XIX secolo – tramite il recepimento del diritto civile occidentale, la disamina delle esperienze europee in materia di pubblicità immobiliare assume una notevole importanza, al fine di esaminare le norme vigenti in Cina e i cambiamenti scaturenti dalla riforma. Pertanto, l’obiettivo della mia ricerca è stato quello di avanzare una tesi che possa rivelarsi quale strumento utile per la riforma in Cina, attraverso uno studio comparato dei modelli europei in materia di registrazione immobiliare. A tal fine, il lavoro è stato suddiviso in due parti: nella prima si è presentata un’analisi dettagliata del diritto di proprietà, del dualismo delle proprietà fondiarie e relative problematiche, del sistema dei diritti reali costituito dalla Legge sui diritti reali del 2007, da cui è partita la riforma dell’istituto della registrazione immobiliare. Un approfondimento particolare è dedicato al pluralismo dei regimi di registrazione immobiliare vigenti nel diritto cinese contemporaneo e all’introduzione dei cambiamenti apportati dal nuovo regolamento del 2015. Nella seconda parte dell’elaborato, attraverso lo studio comparato dei diversi modelli Europei (Francese, Tedesco e Inglese), si è tentato di illustrare le esperienze europee in materia di pubblicità immobiliare maturate nei tre temi maggiormente rappresentativi e concreti, quali la tutela degli interessi privatistici, l’autenticità dei titoli e il ruolo del notaio, la procedura della pubblicità immobiliare, al fine di individuare una via percorribile per il perfezionamento del sistema unitario della registrazione nell’ordinamento cinese. Nelle conclusioni, infine, sono state inserite anche alcune riflessioni circa l’importanza dello studio del diritto comparato per l’esperienza Cinese.

q-Hook length formulas for colored labeled forests

The major index has been deeply studied from the early 1900s and recently has been generalized in different directions, such as the case of labeled forests and colored permutations. In this thesis we define new types of labelings for forests in which the labels are colored integers. We extend the definition of the flag-major index for these labelings and we present an analogue of well known major index hook length formulas. Finally, this study (which has just apparently a simple combinatoric nature) allows us to show a notion of duality for two particular families of groups obtained from the product G(r,n)×G(r,m).