Sensitivity of the Top quark mass measurement with the CMS experiment at LHC using t-tbar multijet simulated events

This thesis comes after a strong contribution on the realization of the CMS computing system, which can be seen as a relevant part of the experiment itself. A physics analysis completes the road from Monte Carlo production and analysis tools realization to the final physics study which is the actual goal of the experiment. The topic of physics work of this thesis is the study of tt events fully hadronic decay in the CMS experiment. A multi-jet trigger has been provided to fix a reasonable starting point, reducing the multi-jet sample to the nominal trigger rate. An offline selection has been provided to reduce the S/B ratio. The b-tag is applied to provide a further S/B improvement. The selection is applied to the background sample and to the samples generated at different top quark masses. The top quark mass candidate is reconstructed for all those samples using a kinematic fitter. The resulting distributions are used to build p.d.f.’s, interpolating them with a continuous arbitrary curve. These curves are used to perform the top mass measurement through a likelihood comparison

Food safety in wine: optimization of analytical controls and evaluation of production technologies

This PhD thesis has been proposed to validate and then apply innovative analytical methodologies for the determination of compounds with harmful impact on human health, such as biogenic amines and ochratoxin A in wines. Therefore, the influence of production technology (pH, amino acids precursor and use of different malolactic starters) on biogenic amines content in wines was evaluated. An HPLC method for simultaneous determination of amino acids and amines with precolumnderivatization with 9-Fluorenyl-methoxycarbonyl chloride (FMOC-Cl) and UV detection was developed. Initially, the influence of pH, time of derivatization, gradient profile were studied. In order to improve the separation of amino acids and amines and reduce the time of analysis, it was decided to study the influence of different flows and the use of different columns in the chromatographic method. Firstly, a C18 Luna column was used and later two monolithic columns Chromolith in series. It appeared to be suitable for an easy, precise and accurate determination of a relatively large number of amino acids and amines in wines. This method was then applied on different wines produced in the Emilia Romagna region. The investigation permitted to discriminate between red and white wines. Amino acids content is related to the winemaking process. Biogenic amines content in these wines does not represent a possible toxicological problem for human health. The results of the study of influence of technologies and wine composition demonstrated that pH of wines and amino acids content are the most important factors. Particularly wines with pH > 3,5 show higher concentration of biogenic amines than wines with lower pH. The enrichment of wines by nutrients also influences the content of some biogenic amines that are higher in wines added with amino acids precursors. In this study, amino acids and biogenic amines are not statistically affected by strain of lactic acid bacteria inoculated as a starter for malolactic fermentation. An evaluation of different clean-up (SPE-MycoSep; IACs and LLE) and determination methods (HPLC and ELISA) of ochratoxin A was carried out. The results obtained proved that the SPE clean-up are reliable at the same level while the LLE procedures shows lowest recovery. The ELISA method gave a lower determination and a low reproducibility than HPLC method.

La costruzione razionale della casa. Scritti e progetti di Giuseppe Pagano

The rational construction of the house. The writings and projects of Giuseppe Pagano Description, themes and research objectives The research aims at analysing the architecture of Giuseppe Pagano, which focuses on the theme of dwelling, through the reading of 3 of his house projects. On the one hand, these projects represent “minor” works not thoroughly known by Pagano’s contemporary critics; on the other they emphasise a particular methodological approach, which serves the author to explore a theme closely linked to his theoretical thought. The house project is a key to Pagano’s research, given its ties to the socio-cultural and political conditions in which the architect was working, so that it becomes a mirror of one of his specific and theoretical path, always in a state of becoming. Pagano understands architecture as a “servant of the human being”, subject to a “utilitarian slavery” since it is a clear, essential and “modest” answer to specific human needs, free from aprioristic aesthetic and formal choices. It is a rational architecture in sensu stricto; it constitutes a perfect synthesis between cause and effect and between function and form. The house needs to accommodate these principles because it is closely intertwined with human needs and intimately linked to a specific place, climatic conditions and technical and economical possibilities. Besides, differently from his public and common masterpieces such as the Palazzo Gualino, the Istituto di Fisica and the Università Commerciale Bocconi, the house projects are representative of a precise project will, which is expressed in a more authentic way, partially freed from political influences and dogmatic preoccupations and, therefore, far from the attempt to research a specific expressive language. I believe that the house project better represents that “ingenuity”, freshness and “sincerity” that Pagano identifies with the minor architecture, thereby revealing a more authentic expression of his understanding of a project. Therefore, the thesis, by tracing the theoretical research of Pagano through the analysis of some of his designed and built works, attempts to identify a specific methodological approach to Pagano’s project, which, developed through time, achieves a certain clarity in the 1930s. In fact, this methodological approach becomes more evident in his last projects, mainly regarding the house and the urban space. These reflect the attempt to respond to the new social needs and, at the same time, they also are an expression of a freer idea of built architecture, closely linked with the place and with the human being who dwells it. The three chosen projects (Villa Colli, La Casa a struttura d’acciaio and Villa Caraccio) make Pagano facing different places, different customers and different economic and technical conditions, which, given the author’s biography, correspond to important historical and political conditions. This is the reason why the projects become apparently distant works, both linguistically and conceptually, to the point that one can define them as ”eclectic”. However, I argue that this eclecticism is actually an added value to the architectural work of Pagano, steaming from the use of a method which, having as a basis the postulate of a rational architecture as essence and logic of building, finds specific variations depending on the multiple variables to be addressed by the project. This is the methodological heritage that Pagano learns from the tradition, especially that of the rural residential architecture, defined by Pagano as a “dictionary of the building logic of man”, as an “a-stylistic background”. For Pagano this traditional architecture is a clear expression of the relationships between a theme and its development, an architectural “fact” that is resolved with purely technical and utilitarian aims and with a spontaneous development far from any aprioristic theoretical principle. Architecture, therefore, cannot be an invention for Pagano and the personal contribution of each architect has to consider his/her close relationship with the specific historical context, place and new building methods. These are basic principles in the methodological approach that drives a great deal of his research and that also permits his thought to be modern. I argue that both ongoing and new collaborations with younger protagonists of the culture and architecture of the period are significant for the development of his methodology. These encounters represent the will to spread his own understanding of the “new architecture” as well as a way of self-renewal by confronting the self with new themes and realities and by learning from his collaborators. Thesis’ outline The thesis is divided in two principal parts, each articulated in four chapters attempting to offer a new reading of the theory and work of Pagano by emphasising the central themes of the research. The first chapter is an introduction to the thesis and to the theme of the rational house, as understood and developed in its typological and technical aspects by Pagano and by other protagonists of the Italian rationalism of the 1930s. Here the attention is on two different aspects defining, according to Pagano, the house project: on the one hand, the typological renewal, aimed at defining a “standard form” as a clear and essential answer to certain needs and variables of the project leading to different formal expressions. On the other, it focuses on the building, understood as a technique to “produce” architecture, where new technologies and new materials are not merely tools but also essential elements of the architectural work. In this way the villa becomes different from the theme of the common house or from that of the minimalist house, by using rules in the choice of material and in the techniques that are every time different depending on the theme under exploration and on the contingency of place. It is also visible the rigorous rationalism that distinguishes the author's appropriation of certain themes of rural architecture. The pages of “Casabella” and the events of the contemporary Triennali form the preliminary material for the writing of this chapter given that they are primary sources to individuate projects and writings produced by Pagano and contemporary architects on this theme. These writings and projects, when compared, reconstruct the evolution of the idea of the rational house and, specifically, of the personal research of Pagano. The second part regards the reading of three of Pagano’s projects of houses as a built verification of his theories. This section constitutes the central part of the thesis since it is aimed at detecting a specific methodological approach showing a theoretical and ideological evolution expressed in the vast edited literature. The three projects that have been chosen explore the theme of the house, looking at various research themes that the author proposes and that find continuity in the affirmation of a specific rationalism, focussed on concepts such as essentiality, utility, functionality and building honesty. These concepts guide the thought and the activities of Pagano, also reflecting a social and cultural period. The projects span from the theme of the villa moderna, Villa Colli, which, inspired by the architecture of North Europe, anticipates a specific rationalism of Pagano based on rigour, simplicity and essentiality, to the theme of the common house, Casa a struttura d’acciaio, la casa del domani, which ponders on the definition of new living spaces and, moreover, on new concepts of standardisation, economical efficiency and new materials responding to the changing needs of the modern society. Finally, the third project returns to the theme of the, Villa Caraccio, revisiting it with new perspectives. These perspectives find in the solution of the open plant, in the openness to nature and landscape and in the revisiting of materials and local building systems that idea of the freed house, which express clearly a new theoretical thought. Methodology It needs to be noted that due to the lack of an official Archive of Pagano’s work, the analysis of his work has been difficult and this explains the necessity to read the articles and the drawings published in the pages of «Casabella» and «Domus». As for the projects of Villa Colli and Casa a struttura d’acciaio, parts of the original drawings have been consulted. These drawings are not published and are kept in private archives of the collaborators of Pagano. The consultation of these documents has permitted the analysis of the cited works, which have been subject to a more complete reading following the different proposed solutions, which have permitted to understand the project path. The projects are analysed thought the method of comparison and critical reading which, specifically, means graphical elaborations and analytical schemes, mostly reconstructed on the basis of original projects but, where possible, also on a photographic investigation. The focus is on the project theme which, beginning with a specific living (dwelling) typology, finds variations because of the historico-political context in which Pagano is embedded and which partially shapes his research and theoretical thought, then translated in the built work. The analysis of the work follows, beginning, where possible, from a reconstruction of the evolution of the project as elaborated on the basis of the original documents and ending on an analysis of the constructive principles and composition. This second phase employs a methodology proposed by Pagano in his article Piante di ville, which, as expected, focuses on the plant as essential tool to identify the “true practical and poetic qualities of the construction”(Pagano, «Costruzioni-Casabella», 1940, p. 2). The reading of the project is integrated with the constructive analyses related to the technical aspects of the house which, in the case of Casa a struttura d’acciaio, play an important role in the project, while in Villa Colli and in Villa Caraccio are principally linked to the choice of materials for the construction of the different architectural elements. These are nonetheless key factors in the composition of the work. Future work could extend this reading to other house projects to deepen the research that could be completed with the consultation of Archival materials, which are missing at present. Finally, in the appendix I present a critical selection of the Pagano’s writings, which recall the themes discussed and embodied by the three projects. The texts have been selected among the articles published in Casabella and in other journals, completing the reading of the project work which cannot be detached from his theoretical thought. Moving from theory to project, we follow a path that brings us to define and deepen the central theme of the thesis: rational building as the principal feature of the architectural research of Pagano, which is paraphrased in multiple ways in his designed and built works.

Application of different instrumental techniques to the selective evaluation of bio-sensible compounds in foodstuff of animal and vegetable origin

This PhD thesis describes the application of some instrumental analytical techniques suitable to the study of fundamental food products for the human diet, such as: extra virgin olive oil and dairy products. These products, widely spread in the market and with high nutritional values, are increasingly recognized healthy properties although their lipid fraction might contain some unfavorable components to the human health. The research activity has been structured in the following investigations: “Comparison of different techniques for trans fatty acids analysis” “Fatty acids analysis of outcrop milk cream samples, with particular emphasis on the content of Conjugated Linoleic Acid (CLA) and trans Fatty Acids (TFA), by using 100m high-polarity capillary column” “Evaluation of the oxidited fatty acids (OFA) content during the Parmigiano-Reggiano cheese seasoning” “Direct analysis of 4-desmethyl sterols and two dihydroxy triterpenes in saponified vegetal oils (olive oil and others) using liquid chromatography-mass spectrometry” “Quantitation of long chain poly-unsatured fatty acids (LC-PUFA) in base infant formulas by Gas Chromatography, and evaluation of the blending phases accuracy during their preparation” “Fatty acids composition of Parmigiano Reggiano cheese samples, with emphasis on trans isomers (TFA)”

Morphogenesis of follicular epithelium in Drosophila melanogaster: function of von Hippel-Lindau tumour suppressor gene

During my PhD I have been involved in several projects regarding the morphogenesis of the follicular epithelium, such as the analysis of the pathways that correlate follicular epithelium patterning and eggshell genes expression. Moreover, I used the follicular epithelium as a model system to analyze the function of the Drosophila homolog of the human von Hippel-Lindau (d-VHL) during oogenesis, in order to gain insight into the role of h-VHL for the pathogenesis of VHL disease. h-VHL is implicated in a variety of processes and there is now a greater appreciation of HIF-independent h-VHL functions that are relevant to tumour development, including maintenance and organization of the primary cilium, maintenance of the differentiated phenotype in renal cells and regulation of epithelial-mesenchymal transition. However, the function of h-VHL gene during development has not been fully understood. It was previously shown that d-VHL down-regulates the motility of tubular epithelial cells (tracheal cells) during embryogenesis. Epithelial morphogenesis is important for organogenesis and pivotal for carcinogenesis, but mechanisms that control it are poorly understood. The Drosophila follicular epithelium is a genetically tractable model to understand these mechanisms in vivo. Therefore, to examine whether d-VHL has a role in epithelial morphogenesis and maintenance, I performed genetic and molecular analyses by using in vivo and in vitro approaches. From my analysis, I determined that d-VHL binds to and stabilizes microtubules. Loss of d-VHL depolymerizes the microtubule network during oogenesis, leading to a possible deregulation in the subcellular trafficking transport of polarity markers from Golgi apparatus to the different domains in which follicle cells are divided. The analysis carried out has allowed to establish a significant role of d-VHL in the maintenance of the follicular epithelium integrity.

Development and characterization of non-oxide ceramic composites for mechanical and tribological applications

The main reasons for the attention focused on ceramics as possible structural materials are their wear resistance and the ability to operate with limited oxidation and ablation at temperatures above 2000°C. Hence, this work is devoted to the study of two classes of materials which can satisfy these requirements: silicon carbide -based ceramics (SiC) for wear applications and borides and carbides of transition metals for ultra-high temperatures applications (UHTCs). SiC-based materials: Silicon carbide is a hard ceramic, which finds applications in many industrial sectors, from heat production, to automotive engineering and metals processing. In view of new fields of uses, SiC-based ceramics were produced with addition of 10-30 vol% of MoSi2, in order to obtain electro conductive ceramics. MoSi2, indeed, is an intermetallic compound which possesses high temperature oxidation resistance, high electrical conductivity (21·10-6 Ω·cm), relatively low density (6.31 g/cm3), high melting point (2030°C) and high stiffness (440 GPa). The SiC-based ceramics were hot pressed at 1900°C with addition of Al2O3-Y2O3 or Y2O3-AlN as sintering additives. The microstructure of the composites and of the reference materials, SiC and MoSi2, were studied by means of conventional analytical techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (SEM-EDS). The composites showed a homogeneous microstructure, with good dispersion of the secondary phases and low residual porosity. The following thermo-mechanical properties of the SiC-based materials were measured: Vickers hardness (HV), Young’s modulus (E), fracture toughness (KIc) and room to high temperature flexural strength (σ). The mechanical properties of the composites were compared to those of two monolithic SiC and MoSi2 materials and resulted in a higher stiffness, fracture toughness and slightly higher flexural resistance. Tribological tests were also performed in two configurations disco-on-pin and slideron cylinder, aiming at studying the wear behaviour of SiC-MoSi2 composites with Al2O3 as counterfacing materials. The tests pointed out that the addition of MoSi2 was detrimental owing to a lower hardness in comparison with the pure SiC matrix. On the contrary, electrical measurements revealed that the addition of 30 vol% of MoSi2, rendered the composite electroconductive, lowering the electrical resistance of three orders of magnitude. Ultra High Temperature Ceramics: Carbides, borides and nitrides of transition metals (Ti, Zr, Hf, Ta, Nb, Mo) possess very high melting points and interesting engineering properties, such as high hardness (20-25 GPa), high stiffness (400-500 GPa), flexural strengths which remain unaltered from room temperature to 1500°C and excellent corrosion resistance in aggressive environment. All these properties place the UHTCs as potential candidates for the development of manoeuvrable hypersonic flight vehicles with sharp leading edges. To this scope Zr- and Hf- carbide and boride materials were produced with addition of 5-20 vol% of MoSi2. This secondary phase enabled the achievement of full dense composites at temperature lower than 2000°C and without the application of pressure. Besides the conventional microstructure analyses XRD and SEM-EDS, transmission electron microscopy (TEM) was employed to explore the microstructure on a small length scale to disclose the effective densification mechanisms. A thorough literature analysis revealed that neither detailed TEM work nor reports on densification mechanisms are available for this class of materials, which however are essential to optimize the sintering aids utilized and the processing parameters applied. Microstructural analyses, along with thermodynamics and crystallographic considerations, led to disclose of the effective role of MoSi2 during sintering of Zrand Hf- carbides and borides. Among the investigated mechanical properties (HV, E, KIc, σ from room temperature to 1500°C), the high temperature flexural strength was improved due to the protective and sealing effect of a silica-based glassy phase, especially for the borides. Nanoindentation tests were also performed on HfC-MoSi2 composites in order to extract hardness and elastic modulus of the single phases. Finally, arc jet tests on HfC- and HfB2-based composites confirmed the excellent oxidation behaviour of these materials under temperature exceeding 2000°C; no cracking or spallation occurred and the modified layer was only 80-90 μm thick.