Effect of rearing techniques and feed composition on productive traits, bird welfare and quality of poultry products

The PhD project was focused on the study of the poultry welfare conditions and improvements. The project work was divided into 3 main research activities. A) Field evaluation of chicken meat rearing conditions kept in intensive farms. Considering the lack of published reports concerning the overall Italian rearing conditions of broiler chickens, a survey was carried out to assess the welfare conditions of broiler reared in the most important poultry companies in Italy to verify if they are in accordance with the advices given in the European proposal COM (2005) 221 final. Chicken farm conditions, carcass lesions and meat quality were investigated. 1. The densities currently used in Italy are in accordance with the European proposal COM 221 final (2005) which suggests to keep broilers at a density lower than 30-32 kg live weight/m2 and to not exceed 38-40 kg live weight/m2. 2. The mortality rates in summer and winter agree with the mortality score calculated following the formula reported in the EU Proposal COM 221 final (2005). 3. The incidence of damaged carcasses was very low and did not seem related to the stocking density. 4. The FPD scores were generally above the maximum limit advised by the EU proposal COM 221 final (2005), although the stocking densities were lower than 30-32 kg live weight per m2. 5. It can be stated that the control of the environmental conditions, particularly litter quality, appears a key issue to control the onset of foot dermatitis. B) Manipulation of several farm parameters, such litter material and depth, stocking density and light regimen to improve the chicken welfare conditions, in winter season. 1. Even though 2 different stocking densities were established in this study, the performances achieved from the chickens were almost identical among groups. 2. The FCR was significantly better in Standard conditions contrarily to birds reared in Welfare conditions with lower stocking density, more litter material and with a light program of 16 hours light and 8 hours dark. 3. In our trial, in Standard groups we observed a higher content of moisture, nitrogen and ammonia released from the litter. Therefore it can be assumed that the environmental characteristics have been positively changed by the improvements of the rearing conditions adopted for Welfare groups. 4. In Welfare groups the exhausted litters of the pens were dryer and broilers showed a lower occurrence of FPD. 5. The prevalence of hock burn lesions, like FPD, is high with poor litter quality conditions. 6. The combined effect of a lower stocking density, a greater amount of litter material and a photoperiod similar to the natural one, have positively influenced the chickens welfare status, as a matter of fact the occurrence of FPD in Welfare groups was the lowest keeping the score under the European threshold of the proposal COM 221 final(2005). C) The purpose of the third research was to study the effect of high or low stocking density of broiler chickens, different types of litter and the adoption of short or long lighting regimen on broiler welfare through the evaluation of their productivity and incidence of foot pad dermatitis during the hot season. 1. The feed efficiency was better for the Low Density than for High Density broilers. 2. The appearance of FPD was not influenced by stocking density. 3. The foot examination revealed that the lesions occurred more in birds maintained on chopped wheat straw than on wood shaving. 4. In conclusion, the adoptions of a short light regimen similar to that occurring in nature during summer reduces the feed intake without modify the growth rate thus improving the feed efficiency. Foot pad lesion were not affected neither by stocking densities nor by light regimens whereas wood shavings exerted a favourable effect in preserving foot pad in good condition. D) A study was carried out to investigate more widely the possible role of 25-hydroxycholecalciferol supplemented in the diet of a laying hen commercial strain (Lohmann brown) in comparison of diets supplemented with D3 or with D3 + 25- hydroxycholecalciferol. Egg traits during a productive cycle as well as the bone characteristics of the layers have been as well evaluated to determine if there the vitamin D3 may enhance the welfare status of the birds. 1. The weight of the egg and of its components is often greater in hens fed a diet enriched with 25-hydroxycholecalciferol. 2. Since eggs of treated groups are heavier and a larger amount of shell is needed, a direct effect on shell strength is observed. 3. At 30 and at 50 wk of age hens fed 25 hydroxycholecalciferol exhibited greater values of bone breaking force. 4. Radiographic density values obtained in the trial are always higher in hens fed with 25-hydroxycholecalciferol of both treatments: supplemented for the whole laying cycle (25D3) or from 40 weeks of age onward (D3+25D3).

Alterazioni del metabolismo osseo e fratture vertebrali dopo trapianto di rene

Introduction:Persistent Hyperparathyroidism after transplantation (HPT),bone disease and vertebral fractures are an important clinical problem in renal transplant patients. Several factors such as renal osteodystrophy, immunosuppressive therapy, deficit/insufficiency Vitamin D may contribute to that.In literature are described different percentages of HPT, vertebral fractures and Osteoporosis/Osteopenia that may be due to the different therapy and to the different employ of steroid. We analyzed 90 patients who received a renal graft between 2005 e 2010. Patients and Methods: 44 male and 46 female. Average age 52,2± 10,1 years, follow-up 31,3±16,6 months, time on dialysis 37±29,6 months. Patients who had creatinine level greater than 2,5 mg/dl were excluded. Immunosuppressive therapy was based on basiliximab, steroids (1.6 to 2 mg/kg/day progressively reduced to 5 mg/day after 45 days from the transplantation) in all patients + calcineurin inhibitor+ mycophenolate mophetil/mycophenolic acid in 88,8% of patients or Everolimus± calcineurin inhibitor in the others. Patients were studied with X-ray of the spine, dual-energy-X-ray, PTH, 25(OH)VitD. Results: 41,1% had HPT; 41,1% had osteopenia at femoral neck and 36,7% at vertebral column; 16,7% had osteoporosis at femoral neck and 15,6% at vertebral column. 10 patients (11%) had vertebral fractures. Patients with normal bone mineral density, compared to those with osteoporosis/osteopenia, are more younger (average age 46,4±11,7 years vs 54.3±8,6); they have spent less time on dialysis (26,5±14,8 months vs 40,7±32,6) and they have values of 25(OH)VitD higher (22,1±7,6 ng/ml vs 17,8±8,5). Patients with vertebral fractures have values of 25(OH)VitD lowest (14,1±6,4 ng/ml vs 19,7±8,5) and they had transplant since more time (29,1±16,2 vs 48,1±8,7 months). There is a significant correlation between HPT and PTH pre transplantation; HPT and levels of VitD (p<0,05) Conclusion: Prevention of Bone disease and vertebral fractures after renal transplant includes: a)treatment before transplantation b)supplementation of vitamin D with cholecalciferol or calcidiol c)shorten the dialysis time.

Sindrome da insensitività completa agli androgeni e massa ossea. Valutazione basale e longitudinale dopo oltre 12 mesi di terapia estrogenica

L’osso è un tessuto target per estrogeni ed androgeni ma l’azione singola e la sinergia tra i due non sono compresi interamente. Le donne affette da Sindrome da Insensititvità Completa agli Androgeni (CAIS) hanno un cariotipo 46XY ma presentano una completa inattività del recettore degli androgeni. Nello studio abbiamo valutato la densità minerale ossea (BMD) in un gruppo di donne adulte CAIS sottoposte a gonadectomia al momento della prima visita e dopo almeno 12 mesi di terapia estrogenica. Il principale obiettivo è stato di valutare se, nelle donne CAIS, una ottimale estrogenizzazione fosse sufficiente a mantenere/ripristinare una adeguata BMD. 24 donne CAIS sono state sottoposte a DXA lombare e femorale all'arruolamento nello studio (t1), dopo terapia estrogenica di 12mesi(t2) e oltre (t>2). Sono state valutate: BMD(g/cm2) e Zscore lombare e femorale (a t1,t2 e t>2) E’ stato considerato se fossero rilevanti l’essere (gruppo1) o meno (gruppo 2) in terapia ormonale al t1 e l’età della gonadectomia. Risultati: Al t1 BMD e Zscore lombari e femorale erano significativamente ridotti rispetto alla popolazione controllo nel campione totale (lombare 0,900+0,12; -1,976+0,07, femorale 0,831 + 0,14; -1,385+0,98), nel gruppo 1 (lombare 0,918+0,116;-1,924+0,79, femorale 0,824+0,13;-1,40+1,00) e nel gruppo 2 (lombare 0.845+0,11 -2,13+1,15, femorale 0,857+0,17;-1,348+1,05) Al t2 e t>2 la BMD lombare è risultata significativamente aumentata (p=0,05 e p=0,02). Zscore lombare, BMD e Zscore femorale non hanno dimostrato variazioni significative. L’aver effettuato la gonadectomia in età post puberale è associato a Zscore lombare e femorale più elevati al t1. Nelle donne CAIS la terapia estrogenica è indispensabile per prevenire un'ulteriore perdita di BMD ma, da sola, non sembra in grado di ripristinare normali valori di BMD.I risultati del nostro studio supportano la tesi che gli androgeni, mediante l’azione recettoriale, abbiano un' azione diretta nel raggiungere e mantenere la BMD.

Evaluation of bone strength: microtomographic tecniques

This thesis is a part of a larger study about the characterization of mechanical and histomorphometrical properties of bone. The main objects of this study were the bone tissue properties and its resistance to mechanical loads. Moreover, the knowledge about the equipment selected to carry out the analyses, the micro-computed tomography (micro-CT), was improved. Particular attention was given to the reliability over time of the measuring instrument. In order to understand the main characteristics of bone mechanical properties a study of the skeletal, the bones of which it is composed and biological principles that drive their formation and remodelling, was necessary. This study has led to the definition of two macro-classes describing the main components responsible for the resistance to fracture of bone: quantity and quality of bone. The study of bone quantity is the current clinical standard measure for so-called bone densitometry, and research studies have amply demonstrated that the amount of tissue is correlated with its mechanical properties of elasticity and fracture. However, the models presented in the literature, including information on the mere quantity of tissue, have often been limited in describing the mechanical behaviour. Recent investigations have underlined that also the bone-structure and the tissue-mineralization play an important role in the mechanical characterization of bone tissue. For this reason in this thesis the class defined as bone quality was mainly studied, splitting it into two sub-classes of bone structure and tissue quality. A study on bone structure was designed to identify which structural parameters, among the several presented in the literature, could be integrated with the information about quantity, in order to better describe the mechanical properties of bone. In this way, it was also possible to analyse the iteration between structure and function. It has been known for long that bone tissue is capable of remodeling and changing its internal structure according to loads, but the dynamics of these changes are still being analysed. This part of the study was aimed to identify the parameters that could quantify the structural changes of bone tissue during the development of a given disease: osteoarthritis. A study on tissue quality would have to be divided into different classes, which would require a scale of analysis not suitable for the micro-CT. For this reason the study was focused only on the mineralization of the tissue, highlighting the difference between bone density and tissue density, working in a context where there is still an ongoing scientific debate.

Human bone: the tissue characteristics determining its mechanical behaviour

The present thesis illustrates the research carried out during the PhD studies in Bioengineering. The research was aimed to characterise the human bone tissue, with particular regard to the differences between cortical and trabecular bone. The bone tissue characteristics that affect its mechanical properties were verified or identified, using an experimental approach, to corroborate or refute hypotheses based on the state of the art in bone tissue biomechanics. The studies presented in the present PhD thesis were designed to investigate aspects of bone tissue biomechanics, which were in need of a more in-depth examination since the data found in the literature was contradictory or scarce. In particular, the work was focalised on the characterisation of the basic structure of the bone tissue (groups of lamellae), its composition, its spatial organisation (trabecular bone microarchitecture) and their influence on the mechanical properties. In conclusion, the present thesis integrates eight different studies on the characterisation of bone tissue. A more in-depth examination of some of the aspects of bone tissue biomechanics where the data found in the literature was contradictory or scarce was performed. Bone tissue was investigated at several scales, from its composition up to its spatial organization, to determine which parameters influence the mechanical behaviour of the tissue. It was found that although the composition and real density of bone tissue are similar, the differences in structure at different levels cause differences between the two types of bone tissue (cortical and trabecular) in mechanical properties. However, the apparent density can still be considered a good predictor of the mechanical properties of both cortical and trabecular bone. Finally, it was found that the bone tissue characteristics might change when a pathology is present, as demonstrated for OA.