Stenodactilina e lanceolina: due nuove potenti “ribosome-inactivating proteins” bicatenarie. Purificazione, caratterizzazione chimico-fisica e studio dei meccanismi citotossici

Two lectins, called lanceolin and stenodactylin, were purified by affinity chromatography on CL Sepharose 6B from the caudices of the Passifloraceae Adenia lanceolata and Adenia stenodactyla, respectively. They are glycoproteins with Mw of 61,243 (lanceolin) and 63,131 daltons (stenodactylin), consisting of an enzymatic A chain linked to a larger B chain with lectin properties, with N-terminal amino acid sequences similar to that of volkensin, the toxic lectin from Adenia volkensii. These two lectins agglutinate red blood cells, inhibit protein synthesis in a cell-free system as well as in whole cells, and depurinate ribosomes and DNA, but not tRNA or poly(A). They are highly toxic to cells, in which they induce apoptosis and strongly inhibit protein synthesis, and to mice, with LD50s 8.16 mg/kg (lanceolin) and 2.76 mg/kg (stenodactylin) at 48 hours after administration. Thus, lanceolin and stenodactylin have all the properties of the toxic type 2 ribosomeinactivating proteins (RIPs). Further experiments were conducted in order to clarify the effects of these RIPs in cells. We investigated the cronological relationship between cytotoxic activity, indirectly evaluated as inhibition of protein synthesis, and loss of cell viability in NB100 cell line. The induction of apoptosis was assessed by determining caspases 3 and 7 levels, which increase 8-16 hours earlier than the beginning of protein synthesis inhibition. This suggest that the arrest of protein synthesis is not a central event in the pathway of cell poisoning by RIPs. The high toxicity and the induction of cell death only by apoptosis and not by necrosis in two muscular cell lines (TE671 and RD/18) suggest that lanceolin and stenodactylin may be potential candidates for experimental chemoablation in strabism and blepharospasm. These results show that lanceolin and stenodactylin are amongst the most potent toxins of plant origin.

Multiobjective genetic algorithms applied to heat transfer problems

In the present work, the multi-objective optimization by genetic algorithms is investigated and applied to heat transfer problems. Firstly, the work aims to compare different reproduction processes employed by genetic algorithms and two new promising processes are suggested. Secondly, in this work two heat transfer problems are studied under the multi-objective point of view. Specifically, the two cases studied are the wavy fins and the corrugated wall channel. Both these cases have already been studied by a single objective optimizer. Therefore, this work aims to extend the previous works in a more comprehensive study.

Magnetohydrodynamic Effects On Mixed Convection Flows In Channels And Ducts

This work focuses on magnetohydrodynamic (MHD) mixed convection flow of electrically conducting fluids enclosed in simple 1D and 2D geometries in steady periodic regime. In particular, in Chapter one a short overview is given about the history of MHD, with reference to papers available in literature, and a listing of some of its most common technological applications, whereas Chapter two deals with the analytical formulation of the MHD problem, starting from the fluid dynamic and energy equations and adding the effects of an external imposed magnetic field using the Ohm's law and the definition of the Lorentz force. Moreover a description of the various kinds of boundary conditions is given, with particular emphasis given to their practical realization. Chapter three, four and five describe the solution procedure of mixed convective flows with MHD effects. In all cases a uniform parallel magnetic field is supposed to be present in the whole fluid domain transverse with respect to the velocity field. The steady-periodic regime will be analyzed, where the periodicity is induced by wall temperature boundary conditions, which vary in time with a sinusoidal law. Local balance equations of momentum, energy and charge will be solved analytically and numerically using as parameters either geometrical ratios or material properties. In particular, in Chapter three the solution method for the mixed convective flow in a 1D vertical parallel channel with MHD effects is illustrated. The influence of a transverse magnetic field will be studied in the steady periodic regime induced by an oscillating wall temperature. Analytical and numerical solutions will be provided in terms of velocity and temperature profiles, wall friction factors and average heat fluxes for several values of the governing parameters. In Chapter four the 2D problem of the mixed convective flow in a vertical round pipe with MHD effects is analyzed. Again, a transverse magnetic field influences the steady periodic regime induced by the oscillating wall temperature of the wall. A numerical solution is presented, obtained using a finite element approach, and as a result velocity and temperature profiles, wall friction factors and average heat fluxes are derived for several values of the Hartmann and Prandtl numbers. In Chapter five the 2D problem of the mixed convective flow in a vertical rectangular duct with MHD effects is discussed. As seen in the previous chapters, a transverse magnetic field influences the steady periodic regime induced by the oscillating wall temperature of the four walls. The numerical solution obtained using a finite element approach is presented, and a collection of results, including velocity and temperature profiles, wall friction factors and average heat fluxes, is provided for several values of, among other parameters, the duct aspect ratio. A comparison with analytical solutions is also provided, as a proof of the validity of the numerical method. Chapter six is the concluding chapter, where some reflections on the MHD effects on mixed convection flow will be made, in agreement with the experience and the results gathered in the analyses presented in the previous chapters. In the appendices special auxiliary functions and FORTRAN program listings are reported, to support the formulations used in the solution chapters.

Costruzione di un Sistema Informativo Geografico Digitale per analisi ambientali

Questo lavoro ha come obiettivo l’utilizzo del Geographical Information System (GIS) per effettuare analisi di sicurezza, monitoraggio e valutazioni di impatto ambientale. Oggi, la totalità delle operazioni GIS possono essere svolte con software open source e in questa sedi si è scelto di utilizzare il GIS GRASS (Geographic Resources Analysis Support System) disponibile nei termini della GNU public license (GPL), mostrando l’usabilità e le notevoli potenzialità di tale software, nonché la qualità dei prodotti ottenibili, mai inferiori ai prodotti e agli strumenti messi a disposizione dai più radicati e diffusi programmi proprietari. Nel capitolo 4, vedremo l’applicazione all’analisi delle conseguenze di ipotetici incidenti, durante le operazioni di dismissione dell’impianto di processamento del combustibile nucleare, di Bosco Marengo (AL). Nel capitolo 5, vedremo applicazioni nel campo del monitoraggio della qualità dell’aria tramite analisi di immagini satellitari.

Studio della trasduzione del Segnale Nucleare Inositide-Dipendente: identificazione di eEF1A2 come nuovo Fosfosubstrato di PKC βI

Introduction Phospholipase Cb1 (PLC-β1) is a key player in the regulation of nuclear inositol lipid signaling and of a wide range of cellular functions, such as proliferation and differentiation (1,2,3). PLCb1 signaling depends on the cleavage of phosphatidylinositol 4,5-bisphosphate and the formation of the second messengers diacylglycerol and Inositol tris-phosphate which activate canonical protein kinase C (cPKC) isoforms. Here we describe a proteomic approach to find out a potential effector of nuclear PLC-b1 dependent signaling during insulin stimulated myogenic differentiation. Methods Nuclear lysates obtained from insulin induced C2C12 myoblasts were immunoprecipitated with anti-phospho-substrate cPKC antibody. Proteins, stained with Comassie blue, were excised, digested and subsequently analysed in LC-MS/MS. For peptide sequence searching, the mass spectra were processed and analyzed using the Mascot MS/MS ion search program with the NCBI database. Western blotting, GST-pull down and co-immunoprecipitation were performed to study the interaction between eEF1A2 and cPKCs. Site direct mutagenesis was performed to confirm the phosphorylated motif recognized by the antibody. Immunofluorescence analysis, GFP-tagged eEF1A2 vector and subcellular fractionation were performed to study nuclear localization and relative distribution of eEF1A2. Results We have previously shown that PLC-β1 is greatly increased at the nuclear level during insulin-induced myoblasts differentiation and that this nuclear localization is essential for induction of differentiation. Thus, nuclear proteins of insulin stimulated C2C12 myoblasts, were immunoprecipitated with an anti-phospho-substrate cPKC antibody. After Electrophoretic gel separation of proteins immunoprecipitated, several molecules were identified by LC-MS/MS. Among these most relevant and unexpected was eukaryotic elongation factor 1 alpha 2 (eEF1A2). We found that eEF1A2 is phosphorylated by PKCb1 and that these two molecules coimmunolocalized at the nucleolar level. eEF1A2 could be phosphorylated in many sites among which both threonine and serine residues. By site direct mutagenesis we demonstrated that it is the serine residue of the motif recognized by the antibody that is specifically phosphorylated by PKCb1. The silencing of PLCb1 gives rise to a reduction of expression and phosphorylation levels of eEF1A2 indicating this molecule as a target of nuclear PLCb1 regulatory network during myoblasts differentiation.

Stability, viscous dissipation and local thermal non-equilibrium in fluid saturated porous media

In this thesis, the field of study related to the stability analysis of fluid saturated porous media is investigated. In particular the contribution of the viscous heating to the onset of convective instability in the flow through ducts is analysed. In order to evaluate the contribution of the viscous dissipation, different geometries, different models describing the balance equations and different boundary conditions are used. Moreover, the local thermal non-equilibrium model is used to study the evolution of the temperature differences between the fluid and the solid matrix in a thermal boundary layer problem. On studying the onset of instability, different techniques for eigenvalue problems has been used. Analytical solutions, asymptotic analyses and numerical solutions by means of original and commercial codes are carried out.

Imaging di risonanza magnetica nucleare nello studio del tumore della prostata

Aim of the present study was to evaluate the accuracy of transrectal ultrasound biopsy (TRUS-biopsy) directed to regions with abnormal MRI and/or MRSI (magnetic resonance spectroscopic imaging ) for both the transition (TZ) and the peripheral (PZ) zones in patients who presented with persistent suspect for prostate cancer and with prior negative biopsy. We also evaluated relationship between MRSI results and histopathological findings of biopsy. 54 patients with the aforementioned characteristics underwent MRI/MRSI at least 6 months after prior negative biopsy; interval between MRI/3D-MRSI and the further TRUS-biopsy was less than 3 months. The prostate was divided in 12 regions both for imaging interpretation and biopsy. Moreover one to three cores more were taken from each region with abnormal MRI and/or 3D-MRSI. Twenty-two out of 54 patients presented cancer at MRI/MRSI-directed-TRUS-biopsy. On a patient basis the highest accuracy was obtained by assigning malignancy on a positive finding with MRSI and MRI even though it was not significantly greater than that obtained using MRI alone (area under the ROC curve, AUC: 0.723 vs. 0.676). On a region (n=648) basis the best accuracy was also obtained by considering positive both MRSI and MRI for PZ (0.768) and TZ (0.822). Twenty-eight per cent of cores with prostatitis were false positive findings on MRSI, whereas only 2.7% of benign prostatic hyperplasia was false positive. In conclusion the accuracy of MRI/MRSI-directed biopsies in localization of prostate cancer is good in patient and region analyses. The combination of both MRI and MRSI results makes TRUS-biopsy more accurate particularly in the TZ (0.822) for patients with prior negative biopsies. Histopathological analysis showed that the main limitation of MRSI is the percentage of false positive findings due to prostatitis.

Second law analysis and simulation techniques for the energy optimization of buildings

The research activity described in this thesis is focused mainly on the study of finite-element techniques applied to thermo-fluid dynamic problems of plant components and on the study of dynamic simulation techniques applied to integrated building design in order to enhance the energy performance of the building. The first part of this doctorate thesis is a broad dissertation on second law analysis of thermodynamic processes with the purpose of including the issue of the energy efficiency of buildings within a wider cultural context which is usually not considered by professionals in the energy sector. In particular, the first chapter includes, a rigorous scheme for the deduction of the expressions for molar exergy and molar flow exergy of pure chemical fuels. The study shows that molar exergy and molar flow exergy coincide when the temperature and pressure of the fuel are equal to those of the environment in which the combustion reaction takes place. A simple method to determine the Gibbs free energy for non-standard values of the temperature and pressure of the environment is then clarified. For hydrogen, carbon dioxide, and several hydrocarbons, the dependence of the molar exergy on the temperature and relative humidity of the environment is reported, together with an evaluation of molar exergy and molar flow exergy when the temperature and pressure of the fuel are different from those of the environment. As an application of second law analysis, a comparison of the thermodynamic efficiency of a condensing boiler and of a heat pump is also reported. The second chapter presents a study of borehole heat exchangers, that is, a polyethylene piping network buried in the soil which allows a ground-coupled heat pump to exchange heat with the ground. After a brief overview of low-enthalpy geothermal plants, an apparatus designed and assembled by the author to carry out thermal response tests is presented. Data obtained by means of in situ thermal response tests are reported and evaluated by means of a finite-element simulation method, implemented through the software package COMSOL Multyphysics. The simulation method allows the determination of the precise value of the effective thermal properties of the ground and of the grout, which are essential for the design of borehole heat exchangers. In addition to the study of a single plant component, namely the borehole heat exchanger, in the third chapter is presented a thorough process for the plant design of a zero carbon building complex. The plant is composed of: 1) a ground-coupled heat pump system for space heating and cooling, with electricity supplied by photovoltaic solar collectors; 2) air dehumidifiers; 3) thermal solar collectors to match 70% of domestic hot water energy use, and a wood pellet boiler for the remaining domestic hot water energy use and for exceptional winter peaks. This chapter includes the design methodology adopted: 1) dynamic simulation of the building complex with the software package TRNSYS for evaluating the energy requirements of the building complex; 2) ground-coupled heat pumps modelled by means of TRNSYS; and 3) evaluation of the total length of the borehole heat exchanger by an iterative method developed by the author. An economic feasibility and an exergy analysis of the proposed plant, compared with two other plants, are reported. The exergy analysis was performed by considering the embodied energy of the components of each plant and the exergy loss during the functioning of the plants.

Neutronics analyses for fast spectrum nuclear systems and scenario studies for advanced nuclear fuel cycles

The present PhD thesis summarizes the three-years study about the neutronic investigation of a new concept nuclear reactor aiming at the optimization and the sustainable management of nuclear fuel in a possible European scenario. A new generation nuclear reactor for the nuclear reinassance is indeed desired by the actual industrialized world, both for the solution of the energetic question arising from the continuously growing energy demand together with the corresponding reduction of oil availability, and the environment question for a sustainable energy source free from Long Lived Radioisotopes and therefore geological repositories. Among the Generation IV candidate typologies, the Lead Fast Reactor concept has been pursued, being the one top rated in sustainability. The European Lead-cooled SYstem (ELSY) has been at first investigated. The neutronic analysis of the ELSY core has been performed via deterministic analysis by means of the ERANOS code, in order to retrieve a stable configuration for the overall design of the reactor. Further analyses have been carried out by means of the Monte Carlo general purpose transport code MCNP, in order to check the former one and to define an exact model of the system. An innovative system of absorbers has been conceptualized and designed for both the reactivity compensation and regulation of the core due to cycle swing, as well as for safety in order to guarantee the cold shutdown of the system in case of accident. Aiming at the sustainability of nuclear energy, the steady-state nuclear equilibrium has been investigated and generalized into the definition of the ``extended'' equilibrium state. According to this, the Adiabatic Reactor Theory has been developed, together with a New Paradigm for Nuclear Power: in order to design a reactor that does not exchange with the environment anything valuable (thus the term ``adiabatic''), in the sense of both Plutonium and Minor Actinides, it is required indeed to revert the logical design scheme of nuclear cores, starting from the definition of the equilibrium composition of the fuel and submitting to the latter the whole core design. The New Paradigm has been applied then to the core design of an Adiabatic Lead Fast Reactor complying with the ELSY overall system layout. A complete core characterization has been done in order to asses criticality and power flattening; a preliminary evaluation of the main safety parameters has been also done to verify the viability of the system. Burn up calculations have been then performed in order to investigate the operating cycle for the Adiabatic Lead Fast Reactor; the fuel performances have been therefore extracted and inserted in a more general analysis for an European scenario. The present nuclear reactors fleet has been modeled and its evolution simulated by means of the COSI code in order to investigate the materials fluxes to be managed in the European region. Different plausible scenarios have been identified to forecast the evolution of the European nuclear energy production, including the one involving the introduction of Adiabatic Lead Fast Reactors, and compared to better analyze the advantages introduced by the adoption of new concept reactors. At last, since both ELSY and the ALFR represent new concept systems based upon innovative solutions, the neutronic design of a demonstrator reactor has been carried out: such a system is intended to prove the viability of technology to be implemented in the First-of-a-Kind industrial power plant, with the aim at attesting the general strategy to use, to the largest extent. It was chosen then to base the DEMO design upon a compromise between demonstration of developed technology and testing of emerging technology in order to significantly subserve the purpose of reducing uncertainties about construction and licensing, both validating ELSY/ALFR main features and performances, and to qualify numerical codes and tools.

Edificio-Impianto: ruolo dell'involucro e dell'impiantistica. Miglioramento delle prestazioni energetiche degli edifici attraverso progetti innovativi che anticipano l'applicazione della Direttiva CE 2010/31

La tematica del presente scritto è l’analisi teorico-sperimentale del sistema edificio-impianto, che è funzione delle soluzioni progettuali adottate, dei componenti scelti e del tipo di conduzione prevista. La Direttiva 2010/31/CE sulle prestazioni energetiche degli edifici, entrata in vigore l’8 luglio 2010, pubblicata sulla Gazzetta Europea del 18 giugno 2010, sostituirà, dal 1º febbraio 2012, la direttiva 2002/91/CE. La direttiva prevede che vengano redatti piani nazionali destinati ad aumentare il numero di “edifici a energia quasi zero” e che entro il 31 dicembre 2020 tutti gli edifici di nuova costruzione dovranno essere “edifici a energia quasi zero”, per gli edifici pubblici questa scadenza è anticipata al 31 dicembre 2018. In questa prospettiva sono stati progettati due “edifici a energia quasi zero”, una villa monofamiliare e un complesso scolastico (scuola dell’infanzia, elementare, media inferiore) attualmente in via di realizzazione, con l’obiettivo principale di fornire un caso studio unico per ogni tipologia in quanto anche modulare e replicabile nella realtà del nostro territorio, che anticipano gli obiettivi fissati dalla Direttiva 2010/31/CE. I risultati ottenibili dai suddetti progetti, esposti nella tesi, sono il frutto di un attenta e proficua progettazione integrata, connubio tra progettazione architettonica ed energetico/impiantistica. La stessa progettazione ha esaminato le tecnologie, i materiali e le soluzioni tecniche “mirate” ai fini del comfort ambientale e di un’elevata prestazione energetica dell’edificio. Inoltre è stato dedicato ampio rilievo alla diagnosi energetica degli edifici esistenti attraverso 4 casi studio, i principali svolti durante i tre anni di dottorato di ricerca, esemplari del patrimonio edilizio italiano. Per ogni caso studio è stata condotta una diagnosi energetica dell’edificio, valutati i risultati e definita la classe energetica, ed in seguito sono stati presi in considerazione i possibili interventi migliorativi sia da un punto di vista qualitativo sia economico tenendo conto degli incentivi statali per l’incremento dell’efficienza energetica.

Dynamic thermal performance of building components and application to the experimental and theoretical analysis of a ventilated façade

The general aim of this work is to contribute to the energy performance assessment of ventilated façades by the simultaneous use of experimental data and numerical simulations. A significant amount of experimental work was done on different types of ventilated façades with natural ventilation. The measurements were taken on a test building. The external walls of this tower are rainscreen ventilated façades. Ventilation grills are located at the top and at the bottom of the tower. In this work the modelling of the test building using a dynamic thermal simulation program (ESP-r) is presented and the main results discussed. In order to investigate the best summer thermal performance of rainscreen ventilated skin façade a study for different setups of rainscreen walls was made. In particular, influences of ventilation grills, air cavity thickness, skin colour, skin material, orientation of façade were investigated. It is shown that some types of rainscreen ventilated façade typologies are capable of lowering the cooling energy demand of a few percent points.