Analysis of charge-transport properties in GST materials for next generation phase-change memory devices

The quest for universal memory is driving the rapid development of memories with superior all-round capabilities in non-volatility, high speed, high endurance and low power. The memory subsystem accounts for a significant cost and power budget of a computer system. Current DRAM-based main memory systems are starting to hit the power and cost limit. To resolve this issue the industry is improving existing technologies such as Flash and exploring new ones. Among those new technologies is the Phase Change Memory (PCM), which overcomes some of the shortcomings of the Flash such as durability and scalability. This alternative non-volatile memory technology, which uses resistance contrast in phase-change materials, offers more density relative to DRAM, and can help to increase main memory capacity of future systems while remaining within the cost and power constraints. Chalcogenide materials can suitably be exploited for manufacturing phase-change memory devices. Charge transport in amorphous chalcogenide-GST used for memory devices is modeled using two contributions: hopping of trapped electrons and motion of band electrons in extended states. Crystalline GST exhibits an almost Ohmic I(V) curve. In contrast amorphous GST shows a high resistance at low biases while, above a threshold voltage, a transition takes place from a highly resistive to a conductive state, characterized by a negative differential-resistance behavior. A clear and complete understanding of the threshold behavior of the amorphous phase is fundamental for exploiting such materials in the fabrication of innovative nonvolatile memories. The type of feedback that produces the snapback phenomenon is described as a filamentation in energy that is controlled by electron–electron interactions between trapped electrons and band electrons. The model thus derived is implemented within a state-of-the-art simulator. An analytical version of the model is also derived and is useful for discussing the snapback behavior and the scaling properties of the device.

Motion control and real-time systems: an approach to trajectory rebuilding in non-deterministic networks

Motion control is a sub-field of automation, in which the position and/or velocity of machines are controlled using some type of device. In motion control the position, velocity, force, pressure, etc., profiles are designed in such a way that the different mechanical parts work as an harmonious whole in which a perfect synchronization must be achieved. The real-time exchange of information in the distributed system that is nowadays an industrial plant plays an important role in order to achieve always better performance, better effectiveness and better safety. The network for connecting field devices such as sensors, actuators, field controllers such as PLCs, regulators, drive controller etc., and man-machine interfaces is commonly called fieldbus. Since the motion transmission is now task of the communication system, and not more of kinematic chains as in the past, the communication protocol must assure that the desired profiles, and their properties, are correctly transmitted to the axes then reproduced or else the synchronization among the different parts is lost with all the resulting consequences. In this thesis, the problem of trajectory reconstruction in the case of an event-triggered communication system is faced. The most important feature that a real-time communication system must have is the preservation of the following temporal and spatial properties: absolute temporal consistency, relative temporal consistency, spatial consistency. Starting from the basic system composed by one master and one slave and passing through systems made up by many slaves and one master or many masters and one slave, the problems in the profile reconstruction and temporal properties preservation, and subsequently the synchronization of different profiles in network adopting an event-triggered communication system, have been shown. These networks are characterized by the fact that a common knowledge of the global time is not available. Therefore they are non-deterministic networks. Each topology is analyzed and the proposed solution based on phase-locked loops adopted for the basic master-slave case has been improved to face with the other configurations.

Maximum principle, mean value operators and quasi boundedness in non-euclidean settings

This work deals with some classes of linear second order partial differential operators with non-negative characteristic form and underlying non- Euclidean structures. These structures are determined by families of locally Lipschitz-continuous vector fields in RN, generating metric spaces of Carnot- Carath´eodory type. The Carnot-Carath´eodory metric related to a family {Xj}j=1,...,m is the control distance obtained by minimizing the time needed to go from two points along piecewise trajectories of vector fields. We are mainly interested in the causes in which a Sobolev-type inequality holds with respect to the X-gradient, and/or the X-control distance is Doubling with respect to the Lebesgue measure in RN. This study is divided into three parts (each corresponding to a chapter), and the subject of each one is a class of operators that includes the class of the subsequent one. In the first chapter, after recalling “X-ellipticity” and related concepts introduced by Kogoj and Lanconelli in [KL00], we show a Maximum Principle for linear second order differential operators for which we only assume a Sobolev-type inequality together with a lower terms summability. Adding some crucial hypotheses on measure and on vector fields (Doubling property and Poincar´e inequality), we will be able to obtain some Liouville-type results. This chapter is based on the paper [GL03] by Guti´errez and Lanconelli. In the second chapter we treat some ultraparabolic equations on Lie groups. In this case RN is the support of a Lie group, and moreover we require that vector fields satisfy left invariance. After recalling some results of Cinti [Cin07] about this class of operators and associated potential theory, we prove a scalar convexity for mean-value operators of L-subharmonic functions, where L is our differential operator. In the third chapter we prove a necessary and sufficient condition of regularity, for boundary points, for Dirichlet problem on an open subset of RN related to sub-Laplacian. On a Carnot group we give the essential background for this type of operator, and introduce the notion of “quasi-boundedness”. Then we show the strict relationship between this notion, the fundamental solution of the given operator, and the regularity of the boundary points.

Mezzi innovativi nella difesa delle cucurbitacee da Fusarium solani f.sp. cucurbitae

Lo studio “Lotta biologica a Fusarium solani f.sp. cucurbitae su zucchino” si colloca nell’ambito della difesa integrata delle colture orticole dalle fitopatie fungine, in particolare quelle causate da patogeni ad habitat terricolo nei confronti dei quali è sempre più frequente il ricorso a mezzi di lotta diversi dai prodotti chimici. Interessante e innovativa appare la prospettiva di utilizzare microrganismi adatti a svilupparsi nel suolo, competenti per la rizosfera delle piante e con spiccate caratteristiche d’antagonismo verso i patogeni tellurici e di stimolazione delle difese sistemiche della pianta. Il marciume del colletto delle cucurbitacee, causato da diversi patogeni tra cui Fusarium solani f.sp. cucurbitae, rappresenta la principale malattia fungina di tipo tellurica che colpisce lo zucchino ed il melone nella Pianura Padana e che può portare a consistenti perdite produttive. Indagini condotte dal 2004 da parte del Diproval nell’areale bolognese, hanno evidenziato un’elevata frequenza del patogeno su zucchino coltivato soprattutto in tunnel. Considerata la carenza di conoscenze locali di F. solani f.sp. cucurbitae e di mezzi chimici di lotta efficaci, la ricerca svolta ha inteso approfondire la diagnosi della malattia e le caratteristiche biologiche degli isolati locali, e valutare la possibilità di utilizzare metodi biologici di lotta contro questo patogeno, nonché di studiare alcune delle possibili modalità d’azione di microrganismi antagonisti. Sono state pertanto prelevate, da zone diverse del Bolognese, campioni di piante di zucchino che presentavano sintomi di marciume del colletto ed è stato isolato il patogeno, che in base alle caratteristiche morfologiche macro e microscopiche, alle prove di patogenicità su diversi ospiti e a saggi biomolecolari, è stato identificato come Fusarium solani f. sp. cucurbitae W.C. Snyder & H.N. Hansen razza 1. Dagli isolati di campo sono state realizzate un centinaio di colture monosporiche venti delle quali sono state utilizzate per la prosecuzione delle prove. I venti ceppi sono stati saggiati per la loro patogenicità inoculandoli in terriccio sterile e con trapianto di giovani piante di zucchino. E’ risultata un’elevata variabilità del livello di virulenza tra i ceppi, stimata da 39% a 83% riguardo la gravità della malattia e da 61 a 96% per la frequenza di malattia. Sono state condotte prove di accrescimento miceliare che hanno evidenziato differenze tra i ceppi e tra gli esperimenti condotti a tre diverse temperature (17, 23 e 28°C) alla luce ed al buio. La crescita maggiore complessivamente è stata ottenuta a 23°C. I venti ceppi hanno anche mostrato di produrre, in vitro, vari livelli di enzimi di patogenesi quali cellulasi, poligalatturonasi, pectin liasi e proteasi. E’ stata evidenziata unan correlazione significativa tra attività cellulasica e pectin liasica con frequenza e gravità della malattia dei venti ceppi del patogeno. Le prove relative al contenimento della malattia sono state condotte in cella climatica. Sono stati considerati prodotti commerciali (Remedier, Rootshield, Cedomon, Mycostop, Proradix, Clonotry) a base rispettivamente dei seguenti microrganismi: Trichoderma harzianum ICC012 + T. viride ICC080, T. harzianum T22, Pseudomonas chlororaphis MA342, Streptomyces griseoviridis K61, P. fluorescens proradix DSM13134 e T. harzianum + Clonostachys rosea). I prodotti sono stati somministrati sul seme, al terreno e su seme+terreno (esperimenti 1 e 2) e in vivaio, al trapianto e vivaio+trapianto (esperimenti 3 e 4), riproducendo situazioni di pratico impiego. L’inoculazione del patogeno (un ceppo ad elevata patogenicità, Fs7 ed uno a bassa patogenicità, Fs37) è stata effettuata nel terreno distribuendo uno sfarinato secco di semi di miglio e cereali colonizzati dal patogeno. La malattia è stata valutata come intensità e gravità. I prodotti sono stati impiegati in situazioni di particolare stress, avendo favorito particolarmente la crescita del patogeno. Complessivamente i risultati hanno evidenziato effetti di contenimento maggiore della malattia nel caso del ceppo Fs37, meno virulento. La malattia è stata ridotta quasi sempre da tutti i formulati e quello che l’ha ridotta maggiormente è stato Cedomon. Il contenimento della malattia somministrando i prodotti solo nel terreno di semina o di trapianto è stato in generale quello più basso. Il contenimento più elevato è stato ottenuto con la combinazione di due tipologie di trattamento, seme+terreno e vivaio+trapianto. Le differenze tra i prodotti sono risultate più evidenti nel caso del ceppo Fs7. Per quanto riguarda lo studio di alcune delle modalità d’azione dei microrganismi contenuti nei formulati più efficaci, è stato verificato che tutti sono stati in grado di inibire, se pur in vario modo, la crescita del patogeno in vitro. Gli antagonisti più efficaci sono stati S. griseoviridis K61 (Mycostop) e P. fluorescens proradix DSM13134). I ceppi di Trichoderma, ed in particolare T.harzianum T22 (Rootshield), sono risultati i più attivi colonizzatori del substrato. Riguardo il fenomeno dell’antibiosi, il batterio P. fluorescens proradix DSM13134 ha mostrato di produrre i metaboliti non volatili più efficaci nel ridurre lo sviluppo del patogeno. Nelle condizioni sperimentali adottate anche i due ceppi di T. viride ICC080 e T. harzianum ICC012 hanno dimostrato di produrre metaboliti efficaci. Tali risultati, anche se relativi a prove in vitro, possono contribuire alla comprensione dei meccanismi dei microrganismi sul contenimento dell’infezione relativamente al rapporto diretto sul patogeno. E’ stato inoltre verificato che tutti i microrganismi saggiati sono dotati di competenza rizosferica e solo i batteri di endofitismo. Si conclude che, nonostante l’elevata pressione infettiva del patogeno che ha certamente influito negativamente sull’efficacia dei microrganismi studiati, i microrganismi antagonisti possono avere un ruolo nel ridurre l’infezione di F. solani f.sp. cucurbitae razza 1.

Altinópolis, una utopia brasiliana. Analisi di una esperienza di educazione alla pace e non violenza come pratica alternativa dell'educazione popolare

The present thesis has as its object of study a project called “Education towards Peace and No Violence”, developed in the town of Altinópolis, in the inner part of the state of São Paulo, Brazil. Based on the analysis and the studies that were carried out, it was possible to identify the difficulties in the implementation of the project, as well as the positive results evidenced by the reduction of the reports of violence in the town. Through a careful research of the historical facts, it shall be demonstrated the progress of education, particularly in Brazil, throughout the years. In addition, a panoramic view of the studies and programs for peace developed in North America and Occidental Europe will be presented. The education for peace based in the holistic concept of human development appeared as a new educational paradigm that works as a crucial instrument in the construction process towards a peaceful and more human society based in social justice.

Application-oriented Mixed Integer Non-Linear Programming

In the most recent years there is a renovate interest for Mixed Integer Non-Linear Programming (MINLP) problems. This can be explained for different reasons: (i) the performance of solvers handling non-linear constraints was largely improved; (ii) the awareness that most of the applications from the real-world can be modeled as an MINLP problem; (iii) the challenging nature of this very general class of problems. It is well-known that MINLP problems are NP-hard because they are the generalization of MILP problems, which are NP-hard themselves. However, MINLPs are, in general, also hard to solve in practice. We address to non-convex MINLPs, i.e. having non-convex continuous relaxations: the presence of non-convexities in the model makes these problems usually even harder to solve. The aim of this Ph.D. thesis is to give a flavor of different possible approaches that one can study to attack MINLP problems with non-convexities, with a special attention to real-world problems. In Part 1 of the thesis we introduce the problem and present three special cases of general MINLPs and the most common methods used to solve them. These techniques play a fundamental role in the resolution of general MINLP problems. Then we describe algorithms addressing general MINLPs. Parts 2 and 3 contain the main contributions of the Ph.D. thesis. In particular, in Part 2 four different methods aimed at solving different classes of MINLP problems are presented. Part 3 of the thesis is devoted to real-world applications: two different problems and approaches to MINLPs are presented, namely Scheduling and Unit Commitment for Hydro-Plants and Water Network Design problems. The results show that each of these different methods has advantages and disadvantages. Thus, typically the method to be adopted to solve a real-world problem should be tailored on the characteristics, structure and size of the problem. Part 4 of the thesis consists of a brief review on tools commonly used for general MINLP problems, constituted an integral part of the development of this Ph.D. thesis (especially the use and development of open-source software). We present the main characteristics of solvers for each special case of MINLP.

Sense development through non verbal signs: early infancy and clinical psychoterapy

This thesis will describe the development of a relationship which is not necessarily verbal, but which generates communication, creates sense and meaning between human beings and produces “becomings” in the body that feels, perceives and physically transforms itself. This leads to a biosemiotic understanding of both the seen and unseen figure.

Sorveglianza dell'influenza aviare: studio di un sistema di rilevazione precoce della circolazione virale in popolazioni di volatili selvatici

The emergency of infection by highly pathogenic avian influenza virus (HPAI) subtype H5N1 has focused the attention of the world scientific community, requiring the prompt provision of effective control systems for early detection of the circulation of low pathogenic influenza H5 viruses (LPAI) in populations of wild birds to prevent outbreaks of highly pathogenic (HPAI) in populations of domestic birds with possible transmission to humans. The project stems from the aim to provide, through a preliminary analysis of data obtained from surveillance in Italy and Europe, a preliminary study about the virus detection rates and the development of mathematical models, an objective assessment of the effectiveness of avian influenza surveillance systems in wild bird populations, and to point out guidelines to support the planning process of the sampling activities. The results obtained from the statistical processing quantify the sampling effort in terms of time and sample size required, and simulating different epidemiological scenarios identify active surveillance as the most suitable for endemic LPAI infection monitoring in wild waterfowl, and passive surveillance as the only really effective tool in early detecting HPAI H5N1 circulation in wild populations. Given the lack of relevant information on H5N1 epidemiology, and the actual finantial and logistic constraints, an approach that makes use of statistical tools to evaluate and predict monitoring activities effectiveness proves to be of primary importance to direct decision-making and make the best use of available resources.

Ottimizzazione dei processi depurativi di reflui ad elevato carico organico a fini di recupero energetico

L’attuale condizione che caratterizza il settore energetico richiede un necessario processo di riconversione che, oltre a favorire il risparmio energetico, riduca la dipendenza dai combustibili fossili ed accresca l’impiego di fonti energetiche rinnovabili, dando un contributo fondamentale alla riduzione delle emissioni di gas serra come diversi accordi internazionali richiedono. Si rende pertanto necessario accelerare i processi che da alcuni anni stanno favorendo l’utilizzo di energia da fonti rinnovabili. Tra queste, le fonti legate ai processi di trattamento biologico dei reflui stanno avendo un interessante sviluppo. Esistono numerosi processi biologici che consentono la produzione di energia in maniera indiretta, quali ad esempio i processi di digestione anaerobica finalizzati alla produzione di biogas e/o produzione biologica di idrogeno. In tale contesto si inserisce la tecnologia delle Microbial Fuel Cell, che consente la produzione diretta di energia elettrica, finalizzata al recupero energetico inteso al miglioramento dell’efficienza energetica e alla riduzione dei costi d’esercizio di impianti di trattamento biologico dei reflui. Il presente lavoro di Tesi di Dottorato sperimentale, svoltosi in collaborazione al laboratorio PROT.-IDR. della sede ENEA di Bologna, riporta i risultati dell’attività di ricerca condotta su una MFC (Microbial Fuel Cell) a doppio stadio biologico per il trattamento di reflui ad elevato carico organico e produzione continua di energia elettrica. E’ stata provata l’applicabilità della MFC con entrambi i comparti biotici utilizzando elettrodi di grafite non trattata ottenendo, con un carico organico in ingresso di circa 9 gd-1, valori di potenza massima prodotta che si attestano su 74 mWm-2, corrente elettrica massima generata di 175 mAm-2 ad una tensione di 421 mV, ed una conversione di COD in elettricità pari a 1,2 gCODm-2d-1. I risultati sono stati molto positivi per quanto riguarda le prestazioni depurative ottenute dalla MFC. L’efficienza di depurazione misurata ha raggiunto un valore massimo del 98% di rimozione del COD in ingresso, mentre e la concentrazione di azoto ammoniacale nell’effluente raccolto all’uscita del sedimentatore è sempre stata inferiore a 1 mgN-NH4+l-1. Tra gli obiettivi posti all’inizio della sperimentazione si è rivelata di notevole interesse la valutazione del possibile utilizzo della MFC come sistema per il monitoraggio on-line del COD e degli acidi grassi volatili (VFA) prodotti all’interno di un digestore anaerobico, attraverso la definizione di una correlazione tra i dati elettrici registrati in continuo e le concentrazioni di CODanaer e VFA misurate in diversi periodi della sperimentazione. L’analisi DGGE della biomassa catodica ha fornito uno strumento analitico utile allo studio della diversità della comunità microbica sospesa ed adesa al catodo e ha confermato la forte similarità delle specie batteriche riconosciute nei campioni analizzati. In particolare, le bande di sequenziamento ottenute sono affiliate ai gruppi batterici Firmicutes, -Proteobacteria,  -Proteobacteria, -Proteobacteria e Bacteroidetes. Da quanto emerso dalla sperimentazione condotta si può pertanto concludere che ad oggi le MFC sono in fase di evoluzione rispetto ai primi prototipi utilizzati per lo studio delle comunità microbiali e per la comprensione dei meccanismi di trasferimento elettronico. Sfruttarne la potenza prodotta in maniera commerciale diviene una grande sfida per il futuro, ed è opinione comune che le prime applicazioni pratiche delle MFC saranno come fonte di recupero energetico per i dispositivi utilizzati per il monitoraggio dell’ambiente e per il trattamento delle acque reflue.

Modeling hydrothermal system: deriving observables and hydrothermal instability in volcanic and non-volcanic setting

Hydrothermal fluids are a fundamental resource for understanding and monitoring volcanic and non-volcanic systems. This thesis is focused on the study of hydrothermal system through numerical modeling with the geothermal simulator TOUGH2. Several simulations are presented, and geophysical and geochemical observables, arising from fluids circulation, are analyzed in detail throughout the thesis. In a volcanic setting, fluids feeding fumaroles and hot spring may play a key role in the hazard evaluation. The evolution of the fluids circulation is caused by a strong interaction between magmatic and hydrothermal systems. A simultaneous analysis of different geophysical and geochemical observables is a sound approach for interpreting monitored data and to infer a consistent conceptual model. Analyzed observables are ground displacement, gravity changes, electrical conductivity, amount, composition and temperature of the emitted gases at surface, and extent of degassing area. Results highlight the different temporal response of the considered observables, as well as the different radial pattern of variation. However, magnitude, temporal response and radial pattern of these signals depend not only on the evolution of fluid circulation, but a main role is played by the considered rock properties. Numerical simulations highlight differences that arise from the assumption of different permeabilities, for both homogeneous and heterogeneous systems. Rock properties affect hydrothermal fluid circulation, controlling both the range of variation and the temporal evolution of the observable signals. Low temperature fumaroles and low discharge rate may be affected by atmospheric conditions. Detailed parametric simulations were performed, aimed to understand the effects of system properties, such as permeability and gas reservoir overpressure, on diffuse degassing when air temperature and barometric pressure changes are applied to the ground surface. Hydrothermal circulation, however, is not only a characteristic of volcanic system. Hot fluids may be involved in several mankind problems, such as studies on geothermal engineering, nuclear waste propagation in porous medium, and Geological Carbon Sequestration (GCS). The current concept for large-scale GCS is the direct injection of supercritical carbon dioxide into deep geological formations which typically contain brine. Upward displacement of such brine from deep reservoirs driven by pressure increases resulting from carbon dioxide injection may occur through abandoned wells, permeable faults or permeable channels. Brine intrusion into aquifers may degrade groundwater resources. Numerical results show that pressure rise drives dense water up to the conduits, and does not necessarily result in continuous flow. Rather, overpressure leads to new hydrostatic equilibrium if fluids are initially density stratified. If warm and salty fluid does not cool passing through the conduit, an oscillatory solution is then possible. Parameter studies delineate steady-state (static) and oscillatory solutions.

Collective effects for the LHC injectors: non-ultrarelativistic approaches

The upgrade of the CERN accelerator complex has been planned in order to further increase the LHC performances in exploring new physics frontiers. One of the main limitations to the upgrade is represented by the collective instabilities. These are intensity dependent phenomena triggered by electromagnetic fields excited by the interaction of the beam with its surrounding. These fields are represented via wake fields in time domain or impedances in frequency domain. Impedances are usually studied assuming ultrarelativistic bunches while we mainly explored low and medium energy regimes in the LHC injector chain. In a non-ultrarelativistic framework we carried out a complete study of the impedance structure of the PSB which accelerates proton bunches up to 1.4 GeV. We measured the imaginary part of the impedance which creates betatron tune shift. We introduced a parabolic bunch model which together with dedicated measurements allowed us to point to the resistive wall impedance as the source of one of the main PSB instability. These results are particularly useful for the design of efficient transverse instability dampers. We developed a macroparticle code to study the effect of the space charge on intensity dependent instabilities. Carrying out the analysis of the bunch modes we proved that the damping effects caused by the space charge, which has been modelled with semi-analytical method and using symplectic high order schemes, can increase the bunch intensity threshold. Numerical libraries have been also developed in order to study, via numerical simulations of the bunches, the impedance of the whole CERN accelerator complex. On a different note, the experiment CNGS at CERN, requires high-intensity beams. We calculated the interpolating Hamiltonian of the beam for highly non-linear lattices. These calculations provide the ground for theoretical and numerical studies aiming to improve the CNGS beam extraction from the PS to the SPS.

Transposable elements: structure and dynamic of the autonomous retrotransposon R2 in Arthropoda with non-canonical reproduction

Eukaryotic ribosomal DNA constitutes a multi gene family organized in a cluster called nucleolar organizer region (NOR); this region is composed usually by hundreds to thousands of tandemly repeated units. Ribosomal genes, being repeated sequences, evolve following the typical pattern of concerted evolution. The autonomous retroelement R2 inserts in the ribosomal gene 28S, leading to defective 28S rDNA genes. R2 element, being a retrotransposon, performs its activity in the genome multiplying its copy number through a “copy and paste” mechanism called target primed reverse transcription. It consists in the retrotranscription of the element’s mRNA into DNA, then the DNA is integrated in the target site. Since the retrotranscription can be interrupted, but the integration will be carried out anyway, truncated copies of the element will also be present in the genome. The study of these truncated variants is a tool to examine the activity of the element. R2 phylogeny appears, in general, not consistent with that of its hosts, except some cases (e.g. Drosophila spp. and Reticulitermes spp.); moreover R2 is absent in some species (Fugu rubripes, human, mouse, etc.), while other species have more R2 lineages in their genome (the turtle Mauremys reevesii, the Japanese beetle Popilia japonica, etc). R2 elements here presented are isolated in 4 species of notostracan branchiopods and in two species of stick insects, whose reproductive strategies range from strict gonochorism to unisexuality. From sequencing data emerges that in Triops cancriformis (Spanish gonochoric population), in Lepidurus arcticus (two putatively unisexual populations from Iceland) and in Bacillus rossius (gonochoric population from Capalbio) the R2 elements are complete and encode functional proteins, reflecting the general features of this family of transposable elements. On the other hand, R2 from Italian and Austrian populations of T. cancriformis (respectively unisexual and hermaphroditic), Lepidurus lubbocki (two elements within the same Italian population, gonochoric but with unfunctional males) and Bacillus grandii grandii (gonochoric population from Ponte Manghisi) have sequences that encode incomplete or non-functional proteins in which it is possible to recognize only part of the characteristic domains. In Lepidurus couesii (Italian gonochoric populations) different elements were found as in L. lubbocki, and the sequencing is still in progress. Two hypothesis are given to explain the inconsistency of R2/host phylogeny: vertical inheritance of the element followed by extinction/diversification or horizontal transmission. My data support previous study that state the vertical transmission as the most likely explanation; nevertheless horizontal transfer events can’t be excluded. I also studied the element’s activity in Spanish populations of T. cancriformis, in L. lubbocki, in L. arcticus and in gonochoric and parthenogenetic populations of B. rossius. In gonochoric populations of T. cancriformis and B. rossius I found that each individual has its own private set of truncated variants. The situation is the opposite for the remaining hermaphroditic/parthenogenetic species and populations, all individuals sharing – in the so far analyzed samples - the majority of variants. This situation is very interesting, because it isn’t concordant with the Muller’s ratchet theory that hypothesizes the parthenogenetic populations being either devoided of transposable elements or TEs overloaded. My data suggest a possible epigenetic mechanism that can block the retrotransposon activity, and in this way deleterious mutations don’t accumulate.